drivers/gpio/gpio_cc32xx.c - third_party/github/zephyrproject-rtos/zephyr - Git at Google

 /*
  * Copyright (c) 2016, Texas Instruments Incorporated
  *
  * SPDX-License-Identifier: Apache-2.0
  */
 #include <errno.h>

 #include <device.h>
 #include <gpio.h>
 #include <init.h>
 #include <kernel.h>
 #include <sys_io.h>

 /* Driverlib includes */
 #include <inc/hw_types.h>
 #include <inc/hw_memmap.h>
 #include <inc/hw_ints.h>
 #include <inc/hw_gpio.h>
 #include <driverlib/rom.h>
 #include <driverlib/pin.h>
 #undef __GPIO_H__  /* Zephyr and CC3200SDK gpio.h conflict */
 #include <driverlib/gpio.h>
 #include <driverlib/rom_map.h>
 #include <driverlib/interrupt.h>

 #include "gpio_utils.h"

 /* Note: Zephyr uses exception numbers, vs the IRQ #s used by the CC3200 SDK */
 #define EXCEPTION_GPIOA0  0  /* (INT_GPIOA0 - 16) = (16-16) */
 #define EXCEPTION_GPIOA1  1  /* (INT_GPIOA1 - 16) = (17-16) */
 #define EXCEPTION_GPIOA2  2  /* (INT_GPIOA2 - 16) = (18-16) */
 #define EXCEPTION_GPIOA3  3  /* (INT_GPIOA3 - 16) = (19-16) */

 struct gpio_cc32xx_config {
 	/* base address of GPIO port */
 	unsigned long port_base;
 	/* GPIO IRQ number */
 	unsigned long irq_num;
 };

 struct gpio_cc32xx_data {
 	/* list of registered callbacks */
 	sys_slist_t callbacks;
 	/* callback enable pin bitmask */
 	uint32_t pin_callback_enables;
 };

 #define DEV_CFG(dev) \
 	((const struct gpio_cc32xx_config *)(dev)->config->config_info)
 #define DEV_DATA(dev) \
 	((struct gpio_cc32xx_data *)(dev)->driver_data)

 static inline int gpio_cc32xx_config(struct device *port,
 				   int access_op, uint32_t pin, int flags)
 {
 	const struct gpio_cc32xx_config *gpio_config = DEV_CFG(port);
 	unsigned long port_base = gpio_config->port_base;
 	unsigned long int_type;

 	/*
 	 * See pinmux_initialize(): which leverages TI's recommended
 	 * method of using the PinMux utility for most pin configuration.
 	 */

 	if (access_op == GPIO_ACCESS_BY_PIN) {
 		/* Just handle runtime interrupt type config here: */
 		if (flags & GPIO_INT) {
 			if (flags & GPIO_INT_EDGE) {
 				if (flags & GPIO_INT_ACTIVE_HIGH) {
 					int_type = GPIO_RISING_EDGE;
 				} else if (flags & GPIO_INT_DOUBLE_EDGE) {
 					int_type = GPIO_BOTH_EDGES;
 				} else {
 					int_type = GPIO_FALLING_EDGE;
 				}
 			} else { /* GPIO_INT_LEVEL */
 				if (flags & GPIO_INT_ACTIVE_HIGH) {
 					int_type = GPIO_HIGH_LEVEL;
 				} else {
 					int_type = GPIO_LOW_LEVEL;
 				}
 			}
 			MAP_GPIOIntTypeSet(port_base, (1 << pin), int_type);
 			MAP_GPIOIntClear(port_base, (1 << pin));
 			MAP_GPIOIntEnable(port_base, (1 << pin));
 		}
 	} else {
 		return -ENOTSUP;
 	}

 	return 0;
 }

 static inline int gpio_cc32xx_write(struct device *port,
 				    int access_op, uint32_t pin, uint32_t value)
 {
 	const struct gpio_cc32xx_config *gpio_config = DEV_CFG(port);
 	unsigned long port_base = gpio_config->port_base;

 	if (access_op == GPIO_ACCESS_BY_PIN) {
 		value = value << pin;
 		/* Bitpack external GPIO pin number for GPIOPinWrite API: */
 		pin = 1 << pin;

 		MAP_GPIOPinWrite(port_base, (unsigned char)pin, value);
 	} else {
 		return -ENOTSUP;
 	}

 	return 0;
 }

 static inline int gpio_cc32xx_read(struct device *port,
 				   int access_op, uint32_t pin, uint32_t *value)
 {
 	const struct gpio_cc32xx_config *gpio_config = DEV_CFG(port);
 	unsigned long port_base = gpio_config->port_base;
 	long status;
 	unsigned char pin_packed;

 	if (access_op == GPIO_ACCESS_BY_PIN) {
 		/* Bitpack external GPIO pin number for GPIOPinRead API: */
 		pin_packed = 1 << pin;
 		status =  MAP_GPIOPinRead(port_base, pin_packed);
 		*value = status >> pin;
 	} else {
 		return -ENOTSUP;
 	}

 	return 0;
 }

 static int gpio_cc32xx_manage_callback(struct device *dev,
 				    struct gpio_callback *callback, bool set)
 {
 	struct gpio_cc32xx_data *data = DEV_DATA(dev);

 	_gpio_manage_callback(&data->callbacks, callback, set);

 	return 0;
 }


 static int gpio_cc32xx_enable_callback(struct device *dev,
 				    int access_op, uint32_t pin)
 {
 	struct gpio_cc32xx_data *data = DEV_DATA(dev);

 	if (access_op == GPIO_ACCESS_BY_PIN) {
 		data->pin_callback_enables |= (1 << pin);
 	} else {
 		data->pin_callback_enables = 0xFFFFFFFF;
 	}

 	return 0;
 }


 static int gpio_cc32xx_disable_callback(struct device *dev,
 				     int access_op, uint32_t pin)
 {
 	struct gpio_cc32xx_data *data = DEV_DATA(dev);

 	if (access_op == GPIO_ACCESS_BY_PIN) {
 		data->pin_callback_enables &= ~(1 << pin);
 	} else {
 		data->pin_callback_enables = 0;
 	}

 	return 0;
 }

 static void gpio_cc32xx_port_isr(void *arg)
 {
 	struct device *dev = arg;
 	const struct gpio_cc32xx_config *config = DEV_CFG(dev);
 	struct gpio_cc32xx_data *data = DEV_DATA(dev);
 	uint32_t enabled_int, int_status;

 	/* See which interrupts triggered: */
 	int_status  = (uint32_t)MAP_GPIOIntStatus(config->port_base, 1);

 	enabled_int = int_status & data->pin_callback_enables;

 	/* Clear and Disable GPIO Interrupt */
 	MAP_GPIOIntDisable(config->port_base, int_status);
 	MAP_GPIOIntClear(config->port_base, int_status);

 	/* Call the registered callbacks */
 	_gpio_fire_callbacks(&data->callbacks, (struct device *)dev,
 			     enabled_int);

 	/* Re-enable the interrupts */
 	MAP_GPIOIntEnable(config->port_base, int_status);
 }

 static const struct gpio_driver_api api_funcs = {
 	.config = gpio_cc32xx_config,
 	.write = gpio_cc32xx_write,
 	.read = gpio_cc32xx_read,
 	.manage_callback = gpio_cc32xx_manage_callback,
 	.enable_callback = gpio_cc32xx_enable_callback,
 	.disable_callback = gpio_cc32xx_disable_callback,

 };

 #ifdef CONFIG_GPIO_CC32XX_A0
 static const struct gpio_cc32xx_config gpio_cc32xx_a0_config = {
 	.port_base = GPIOA0_BASE,
 	.irq_num = INT_GPIOA0,
 };

 static struct device DEVICE_NAME_GET(gpio_cc32xx_a0);
 static struct gpio_cc32xx_data gpio_cc32xx_a0_data;

 static int gpio_cc32xx_a0_init(struct device *dev)
 {
 	ARG_UNUSED(dev);

 	IRQ_CONNECT(EXCEPTION_GPIOA0, CONFIG_GPIO_CC32XX_A0_IRQ_PRI,
 		    gpio_cc32xx_port_isr, DEVICE_GET(gpio_cc32xx_a0), 0);

 	MAP_IntPendClear(INT_GPIOA0);
 	irq_enable(EXCEPTION_GPIOA0);

 	return 0;
 }

 DEVICE_AND_API_INIT(gpio_cc32xx_a0, CONFIG_GPIO_CC32XX_A0_NAME,
 		    &gpio_cc32xx_a0_init, &gpio_cc32xx_a0_data,
 		    &gpio_cc32xx_a0_config,
 		    POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
 		    &api_funcs);

 #endif

 #ifdef CONFIG_GPIO_CC32XX_A1
 static const struct gpio_cc32xx_config gpio_cc32xx_a1_config = {
 	.port_base = GPIOA1_BASE,
 	.irq_num = INT_GPIOA1,
 };

 static struct device DEVICE_NAME_GET(gpio_cc32xx_a1);
 static struct gpio_cc32xx_data gpio_cc32xx_a1_data;

 static int gpio_cc32xx_a1_init(struct device *dev)
 {
 	ARG_UNUSED(dev);

 	IRQ_CONNECT(EXCEPTION_GPIOA1, CONFIG_GPIO_CC32XX_A1_IRQ_PRI,
 		    gpio_cc32xx_port_isr, DEVICE_GET(gpio_cc32xx_a1), 0);

 	MAP_IntPendClear(INT_GPIOA1);
 	irq_enable(EXCEPTION_GPIOA1);

 	return 0;
 }

 DEVICE_AND_API_INIT(gpio_cc32xx_a1, CONFIG_GPIO_CC32XX_A1_NAME,
 		    &gpio_cc32xx_a1_init, &gpio_cc32xx_a1_data,
 		    &gpio_cc32xx_a1_config,
 		    POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
 		    &api_funcs);

 #endif /* CONFIG_GPIO_CC32XX_A1 */

 #ifdef CONFIG_GPIO_CC32XX_A2
 static const struct gpio_cc32xx_config gpio_cc32xx_a2_config = {
 	.port_base = GPIOA2_BASE,
 	.irq_num = INT_GPIOA2,
 };

 static struct device DEVICE_NAME_GET(gpio_cc32xx_a2);
 static struct gpio_cc32xx_data gpio_cc32xx_a2_data;

 static int gpio_cc32xx_a2_init(struct device *dev)
 {
 	ARG_UNUSED(dev);

 	IRQ_CONNECT(EXCEPTION_GPIOA2, CONFIG_GPIO_CC32XX_A2_IRQ_PRI,
 		    gpio_cc32xx_port_isr, DEVICE_GET(gpio_cc32xx_a2), 0);

 	MAP_IntPendClear(INT_GPIOA2);
 	irq_enable(EXCEPTION_GPIOA2);

 	return 0;
 }

 DEVICE_AND_API_INIT(gpio_cc32xx_a2, CONFIG_GPIO_CC32XX_A2_NAME,
 		    &gpio_cc32xx_a2_init, &gpio_cc32xx_a2_data,
 		    &gpio_cc32xx_a2_config,
 		    POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
 		    &api_funcs);

 #endif

 #ifdef CONFIG_GPIO_CC32XX_A3
 static const struct gpio_cc32xx_config gpio_cc32xx_a3_config = {
 	.port_base = GPIOA3_BASE,
 	.irq_num = INT_GPIOA3,
 };

 static struct device DEVICE_NAME_GET(gpio_cc32xx_a3);
 static struct gpio_cc32xx_data gpio_cc32xx_a3_data;

 static int gpio_cc32xx_a3_init(struct device *dev)
 {
 	ARG_UNUSED(dev);

 	IRQ_CONNECT(EXCEPTION_GPIOA3, CONFIG_GPIO_CC32XX_A3_IRQ_PRI,
 		    gpio_cc32xx_port_isr, DEVICE_GET(gpio_cc32xx_a3), 0);

 	MAP_IntPendClear(INT_GPIOA3);
 	irq_enable(EXCEPTION_GPIOA3);

 	return 0;
 }

 DEVICE_AND_API_INIT(gpio_cc32xx_a3, CONFIG_GPIO_CC32XX_A3_NAME,
 		    &gpio_cc32xx_a3_init, &gpio_cc32xx_a3_data,
 		    &gpio_cc32xx_a3_config,
 		    POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
 		    &api_funcs);

 #endif
	/*
	* Copyright (c) 2016, Texas Instruments Incorporated
	*
	* SPDX-License-Identifier: Apache-2.0
	*/
	#include <errno.h>

	#include <device.h>
	#include <gpio.h>
	#include <init.h>
	#include <kernel.h>
	#include <sys_io.h>

	/* Driverlib includes */
	#include <inc/hw_types.h>
	#include <inc/hw_memmap.h>
	#include <inc/hw_ints.h>
	#include <inc/hw_gpio.h>
	#include <driverlib/rom.h>
	#include <driverlib/pin.h>
	#undef __GPIO_H__ /* Zephyr and CC3200SDK gpio.h conflict */
	#include <driverlib/gpio.h>
	#include <driverlib/rom_map.h>
	#include <driverlib/interrupt.h>

	#include "gpio_utils.h"

	/* Note: Zephyr uses exception numbers, vs the IRQ #s used by the CC3200 SDK */
	#define EXCEPTION_GPIOA0 0 /* (INT_GPIOA0 - 16) = (16-16) */
	#define EXCEPTION_GPIOA1 1 /* (INT_GPIOA1 - 16) = (17-16) */
	#define EXCEPTION_GPIOA2 2 /* (INT_GPIOA2 - 16) = (18-16) */
	#define EXCEPTION_GPIOA3 3 /* (INT_GPIOA3 - 16) = (19-16) */

	struct gpio_cc32xx_config {
	/* base address of GPIO port */
	unsigned long port_base;
	/* GPIO IRQ number */
	unsigned long irq_num;
	};

	struct gpio_cc32xx_data {
	/* list of registered callbacks */
	sys_slist_t callbacks;
	/* callback enable pin bitmask */
	uint32_t pin_callback_enables;
	};

	#define DEV_CFG(dev) \
	((const struct gpio_cc32xx_config *)(dev)->config->config_info)
	#define DEV_DATA(dev) \
	((struct gpio_cc32xx_data *)(dev)->driver_data)

	static inline int gpio_cc32xx_config(struct device *port,
	int access_op, uint32_t pin, int flags)
	{
	const struct gpio_cc32xx_config *gpio_config = DEV_CFG(port);
	unsigned long port_base = gpio_config->port_base;
	unsigned long int_type;

	/*
	* See pinmux_initialize(): which leverages TI's recommended
	* method of using the PinMux utility for most pin configuration.
	*/

	if (access_op == GPIO_ACCESS_BY_PIN) {
	/* Just handle runtime interrupt type config here: */
	if (flags & GPIO_INT) {
	if (flags & GPIO_INT_EDGE) {
	if (flags & GPIO_INT_ACTIVE_HIGH) {
	int_type = GPIO_RISING_EDGE;
	} else if (flags & GPIO_INT_DOUBLE_EDGE) {
	int_type = GPIO_BOTH_EDGES;
	} else {
	int_type = GPIO_FALLING_EDGE;
	}
	} else { /* GPIO_INT_LEVEL */
	if (flags & GPIO_INT_ACTIVE_HIGH) {
	int_type = GPIO_HIGH_LEVEL;
	} else {
	int_type = GPIO_LOW_LEVEL;
	}
	}
	MAP_GPIOIntTypeSet(port_base, (1 << pin), int_type);
	MAP_GPIOIntClear(port_base, (1 << pin));
	MAP_GPIOIntEnable(port_base, (1 << pin));
	}
	} else {
	return -ENOTSUP;
	}

	return 0;
	}

	static inline int gpio_cc32xx_write(struct device *port,
	int access_op, uint32_t pin, uint32_t value)
	{
	const struct gpio_cc32xx_config *gpio_config = DEV_CFG(port);
	unsigned long port_base = gpio_config->port_base;

	if (access_op == GPIO_ACCESS_BY_PIN) {
	value = value << pin;
	/* Bitpack external GPIO pin number for GPIOPinWrite API: */
	pin = 1 << pin;

	MAP_GPIOPinWrite(port_base, (unsigned char)pin, value);
	} else {
	return -ENOTSUP;
	}

	return 0;
	}

	static inline int gpio_cc32xx_read(struct device *port,
	int access_op, uint32_t pin, uint32_t *value)
	{
	const struct gpio_cc32xx_config *gpio_config = DEV_CFG(port);
	unsigned long port_base = gpio_config->port_base;
	long status;
	unsigned char pin_packed;

	if (access_op == GPIO_ACCESS_BY_PIN) {
	/* Bitpack external GPIO pin number for GPIOPinRead API: */
	pin_packed = 1 << pin;
	status = MAP_GPIOPinRead(port_base, pin_packed);
	*value = status >> pin;
	} else {
	return -ENOTSUP;
	}

	return 0;
	}

	static int gpio_cc32xx_manage_callback(struct device *dev,
	struct gpio_callback *callback, bool set)
	{
	struct gpio_cc32xx_data *data = DEV_DATA(dev);

	_gpio_manage_callback(&data->callbacks, callback, set);

	return 0;
	}


	static int gpio_cc32xx_enable_callback(struct device *dev,
	int access_op, uint32_t pin)
	{
	struct gpio_cc32xx_data *data = DEV_DATA(dev);

	if (access_op == GPIO_ACCESS_BY_PIN) {
	data->pin_callback_enables \|= (1 << pin);
	} else {
	data->pin_callback_enables = 0xFFFFFFFF;
	}

	return 0;
	}


	static int gpio_cc32xx_disable_callback(struct device *dev,
	int access_op, uint32_t pin)
	{
	struct gpio_cc32xx_data *data = DEV_DATA(dev);

	if (access_op == GPIO_ACCESS_BY_PIN) {
	data->pin_callback_enables &= ~(1 << pin);
	} else {
	data->pin_callback_enables = 0;
	}

	return 0;
	}

	static void gpio_cc32xx_port_isr(void *arg)
	{
	struct device *dev = arg;
	const struct gpio_cc32xx_config *config = DEV_CFG(dev);
	struct gpio_cc32xx_data *data = DEV_DATA(dev);
	uint32_t enabled_int, int_status;

	/* See which interrupts triggered: */
	int_status = (uint32_t)MAP_GPIOIntStatus(config->port_base, 1);

	enabled_int = int_status & data->pin_callback_enables;

	/* Clear and Disable GPIO Interrupt */
	MAP_GPIOIntDisable(config->port_base, int_status);
	MAP_GPIOIntClear(config->port_base, int_status);

	/* Call the registered callbacks */
	_gpio_fire_callbacks(&data->callbacks, (struct device *)dev,
	enabled_int);

	/* Re-enable the interrupts */
	MAP_GPIOIntEnable(config->port_base, int_status);
	}

	static const struct gpio_driver_api api_funcs = {
	.config = gpio_cc32xx_config,
	.write = gpio_cc32xx_write,
	.read = gpio_cc32xx_read,
	.manage_callback = gpio_cc32xx_manage_callback,
	.enable_callback = gpio_cc32xx_enable_callback,
	.disable_callback = gpio_cc32xx_disable_callback,

	};

	#ifdef CONFIG_GPIO_CC32XX_A0
	static const struct gpio_cc32xx_config gpio_cc32xx_a0_config = {
	.port_base = GPIOA0_BASE,
	.irq_num = INT_GPIOA0,
	};

	static struct device DEVICE_NAME_GET(gpio_cc32xx_a0);
	static struct gpio_cc32xx_data gpio_cc32xx_a0_data;

	static int gpio_cc32xx_a0_init(struct device *dev)
	{
	ARG_UNUSED(dev);

	IRQ_CONNECT(EXCEPTION_GPIOA0, CONFIG_GPIO_CC32XX_A0_IRQ_PRI,
	gpio_cc32xx_port_isr, DEVICE_GET(gpio_cc32xx_a0), 0);

	MAP_IntPendClear(INT_GPIOA0);
	irq_enable(EXCEPTION_GPIOA0);

	return 0;
	}

	DEVICE_AND_API_INIT(gpio_cc32xx_a0, CONFIG_GPIO_CC32XX_A0_NAME,
	&gpio_cc32xx_a0_init, &gpio_cc32xx_a0_data,
	&gpio_cc32xx_a0_config,
	POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
	&api_funcs);

	#endif

	#ifdef CONFIG_GPIO_CC32XX_A1
	static const struct gpio_cc32xx_config gpio_cc32xx_a1_config = {
	.port_base = GPIOA1_BASE,
	.irq_num = INT_GPIOA1,
	};

	static struct device DEVICE_NAME_GET(gpio_cc32xx_a1);
	static struct gpio_cc32xx_data gpio_cc32xx_a1_data;

	static int gpio_cc32xx_a1_init(struct device *dev)
	{
	ARG_UNUSED(dev);

	IRQ_CONNECT(EXCEPTION_GPIOA1, CONFIG_GPIO_CC32XX_A1_IRQ_PRI,
	gpio_cc32xx_port_isr, DEVICE_GET(gpio_cc32xx_a1), 0);

	MAP_IntPendClear(INT_GPIOA1);
	irq_enable(EXCEPTION_GPIOA1);

	return 0;
	}

	DEVICE_AND_API_INIT(gpio_cc32xx_a1, CONFIG_GPIO_CC32XX_A1_NAME,
	&gpio_cc32xx_a1_init, &gpio_cc32xx_a1_data,
	&gpio_cc32xx_a1_config,
	POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
	&api_funcs);

	#endif /* CONFIG_GPIO_CC32XX_A1 */

	#ifdef CONFIG_GPIO_CC32XX_A2
	static const struct gpio_cc32xx_config gpio_cc32xx_a2_config = {
	.port_base = GPIOA2_BASE,
	.irq_num = INT_GPIOA2,
	};

	static struct device DEVICE_NAME_GET(gpio_cc32xx_a2);
	static struct gpio_cc32xx_data gpio_cc32xx_a2_data;

	static int gpio_cc32xx_a2_init(struct device *dev)
	{
	ARG_UNUSED(dev);

	IRQ_CONNECT(EXCEPTION_GPIOA2, CONFIG_GPIO_CC32XX_A2_IRQ_PRI,
	gpio_cc32xx_port_isr, DEVICE_GET(gpio_cc32xx_a2), 0);

	MAP_IntPendClear(INT_GPIOA2);
	irq_enable(EXCEPTION_GPIOA2);

	return 0;
	}

	DEVICE_AND_API_INIT(gpio_cc32xx_a2, CONFIG_GPIO_CC32XX_A2_NAME,
	&gpio_cc32xx_a2_init, &gpio_cc32xx_a2_data,
	&gpio_cc32xx_a2_config,
	POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
	&api_funcs);

	#endif

	#ifdef CONFIG_GPIO_CC32XX_A3
	static const struct gpio_cc32xx_config gpio_cc32xx_a3_config = {
	.port_base = GPIOA3_BASE,
	.irq_num = INT_GPIOA3,
	};

	static struct device DEVICE_NAME_GET(gpio_cc32xx_a3);
	static struct gpio_cc32xx_data gpio_cc32xx_a3_data;

	static int gpio_cc32xx_a3_init(struct device *dev)
	{
	ARG_UNUSED(dev);

	IRQ_CONNECT(EXCEPTION_GPIOA3, CONFIG_GPIO_CC32XX_A3_IRQ_PRI,
	gpio_cc32xx_port_isr, DEVICE_GET(gpio_cc32xx_a3), 0);

	MAP_IntPendClear(INT_GPIOA3);
	irq_enable(EXCEPTION_GPIOA3);

	return 0;
	}

	DEVICE_AND_API_INIT(gpio_cc32xx_a3, CONFIG_GPIO_CC32XX_A3_NAME,
	&gpio_cc32xx_a3_init, &gpio_cc32xx_a3_data,
	&gpio_cc32xx_a3_config,
	POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
	&api_funcs);

	#endif