| Title: USB Console Hello World |
| |
| Description: |
| |
| A simple Hello World example, with console output coming to USB UART. Primarily |
| intended to show the required config options. |
| |
| Usage |
| ----- |
| Plug the board into a host device, for example, a PC running Linux. |
| The board will be detected as a CDC_ACM serial device. To see the console output |
| from the zephyr board, use a command similar to "minicom -D /dev/ttyACM0". |
| You may need to stop modemmanager via "sudo stop modemmanager", if it is |
| trying to access the device in the background. |
| |
| -------------------------------------------------------------------------------- |
| |
| Building and Running Project: |
| |
| Refer to https://wiki.zephyrproject.org/view/Arduino_101 for details on flashing |
| the image into an Arduno 101. |
| |
| |
| Sample Output: |
| |
| Hello World! x86 |
| Hello World! x86 |
| Hello World! x86 |
| Hello World! x86 |
| ... |
| ... |
