| /* ENC424J600 Stand-alone Ethernet Controller with SPI |
| * |
| * Copyright (c) 2016 Intel Corporation |
| * Copyright (c) 2019 PHYTEC Messtechnik GmbH |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <zephyr.h> |
| #include <device.h> |
| #include <string.h> |
| #include <errno.h> |
| #include <drivers/gpio.h> |
| #include <drivers/spi.h> |
| #include <net/net_pkt.h> |
| #include <net/net_if.h> |
| #include <net/ethernet.h> |
| #include <ethernet/eth_stats.h> |
| |
| #include "eth_enc424j600_priv.h" |
| |
| LOG_MODULE_REGISTER(ethdrv, CONFIG_ETHERNET_LOG_LEVEL); |
| |
| static void enc424j600_write_sbc(struct device *dev, u8_t cmd) |
| { |
| struct enc424j600_runtime *context = dev->driver_data; |
| u8_t buf[2] = { cmd, 0xFF }; |
| const struct spi_buf tx_buf = { |
| .buf = buf, |
| .len = 1, |
| }; |
| const struct spi_buf_set tx = { |
| .buffers = &tx_buf, |
| .count = 1 |
| }; |
| |
| spi_write(context->spi, &context->spi_cfg, &tx); |
| } |
| |
| static void enc424j600_write_sfru(struct device *dev, u8_t addr, |
| u16_t value) |
| { |
| struct enc424j600_runtime *context = dev->driver_data; |
| u8_t buf[4]; |
| const struct spi_buf tx_buf = { |
| .buf = buf, |
| .len = sizeof(buf) |
| }; |
| const struct spi_buf_set tx = { |
| .buffers = &tx_buf, |
| .count = 1 |
| }; |
| |
| buf[0] = ENC424J600_NBC_WCRU; |
| buf[1] = addr; |
| buf[2] = value; |
| buf[3] = value >> 8; |
| |
| spi_write(context->spi, &context->spi_cfg, &tx); |
| } |
| |
| static void enc424j600_read_sfru(struct device *dev, u8_t addr, |
| u16_t *value) |
| { |
| struct enc424j600_runtime *context = dev->driver_data; |
| u8_t buf[4]; |
| const struct spi_buf tx_buf = { |
| .buf = buf, |
| .len = 2 |
| }; |
| const struct spi_buf_set tx = { |
| .buffers = &tx_buf, |
| .count = 1 |
| }; |
| struct spi_buf rx_buf = { |
| .buf = buf, |
| .len = sizeof(buf), |
| }; |
| const struct spi_buf_set rx = { |
| .buffers = &rx_buf, |
| .count = 1 |
| }; |
| |
| buf[0] = ENC424J600_NBC_RCRU; |
| buf[1] = addr; |
| |
| if (!spi_transceive(context->spi, &context->spi_cfg, &tx, &rx)) { |
| *value = ((u16_t)buf[3] << 8 | buf[2]); |
| } else { |
| LOG_DBG("Failure while reading register 0x%02x", addr); |
| *value = 0U; |
| } |
| } |
| |
| static void enc424j600_modify_sfru(struct device *dev, u8_t opcode, |
| u16_t addr, u16_t value) |
| { |
| struct enc424j600_runtime *context = dev->driver_data; |
| u8_t buf[4]; |
| const struct spi_buf tx_buf = { |
| .buf = buf, |
| .len = sizeof(buf) |
| }; |
| const struct spi_buf_set tx = { |
| .buffers = &tx_buf, |
| .count = 1 |
| }; |
| |
| buf[0] = opcode; |
| buf[1] = addr; |
| buf[2] = value; |
| buf[3] = value >> 8; |
| |
| spi_write(context->spi, &context->spi_cfg, &tx); |
| } |
| |
| #define enc424j600_set_sfru(dev, addr, value) \ |
| enc424j600_modify_sfru(dev, ENC424J600_NBC_BFSU, addr, value) |
| |
| #define enc424j600_clear_sfru(dev, addr, value) \ |
| enc424j600_modify_sfru(dev, ENC424J600_NBC_BFCU, addr, value) |
| |
| |
| static void enc424j600_write_phy(struct device *dev, u16_t addr, u16_t data) |
| { |
| u16_t mistat; |
| |
| enc424j600_write_sfru(dev, ENC424J600_SFR2_MIREGADRL, addr); |
| enc424j600_write_sfru(dev, ENC424J600_SFR3_MIWRL, data); |
| |
| do { |
| k_busy_wait(ENC424J600_PHY_ACCESS_DELAY); |
| enc424j600_read_sfru(dev, ENC424J600_SFR3_MISTATL, &mistat); |
| } while ((mistat & ENC424J600_MISTAT_BUSY)); |
| } |
| |
| static void enc424j600_read_phy(struct device *dev, u16_t addr, u16_t *data) |
| { |
| u16_t mistat; |
| |
| enc424j600_write_sfru(dev, ENC424J600_SFR2_MIREGADRL, addr); |
| enc424j600_write_sfru(dev, ENC424J600_SFR2_MICMDL, |
| ENC424J600_MICMD_MIIRD); |
| |
| do { |
| k_busy_wait(ENC424J600_PHY_ACCESS_DELAY); |
| enc424j600_read_sfru(dev, ENC424J600_SFR3_MISTATL, &mistat); |
| } while ((mistat & ENC424J600_MISTAT_BUSY)); |
| |
| enc424j600_write_sfru(dev, ENC424J600_SFR2_MICMDL, 0); |
| enc424j600_read_sfru(dev, ENC424J600_SFR3_MIRDL, data); |
| } |
| |
| static void enc424j600_write_mem(struct device *dev, u8_t opcode, |
| u8_t *data_buffer, u16_t buf_len) |
| { |
| struct enc424j600_runtime *context = dev->driver_data; |
| u8_t buf[1] = { opcode }; |
| const struct spi_buf tx_buf[2] = { |
| { |
| .buf = buf, |
| .len = 1 |
| }, |
| { |
| .buf = data_buffer, |
| .len = buf_len |
| }, |
| }; |
| const struct spi_buf_set tx = { |
| .buffers = tx_buf, |
| .count = 2 |
| }; |
| |
| if (spi_write(context->spi, &context->spi_cfg, &tx)) { |
| LOG_ERR("Failed to write SRAM buffer"); |
| return; |
| } |
| } |
| |
| static void enc424j600_read_mem(struct device *dev, u8_t opcode, |
| u8_t *data_buffer, u16_t buf_len) |
| { |
| struct enc424j600_runtime *context = dev->driver_data; |
| u8_t buf[1] = { opcode }; |
| const struct spi_buf tx_buf = { |
| .buf = buf, |
| .len = 1 |
| }; |
| const struct spi_buf_set tx = { |
| .buffers = &tx_buf, |
| .count = 1 |
| }; |
| struct spi_buf rx_buf[2] = { |
| { |
| .buf = NULL, |
| .len = 1 |
| }, |
| { |
| .buf = data_buffer, |
| .len = buf_len |
| }, |
| }; |
| const struct spi_buf_set rx = { |
| .buffers = rx_buf, |
| .count = 2 |
| }; |
| |
| if (spi_transceive(context->spi, &context->spi_cfg, &tx, &rx)) { |
| LOG_ERR("Failed to read SRAM buffer"); |
| return; |
| } |
| } |
| |
| static void enc424j600_gpio_callback(struct device *dev, |
| struct gpio_callback *cb, |
| u32_t pins) |
| { |
| struct enc424j600_runtime *context = |
| CONTAINER_OF(cb, struct enc424j600_runtime, gpio_cb); |
| |
| k_sem_give(&context->int_sem); |
| } |
| |
| static void enc424j600_init_filters(struct device *dev) |
| { |
| u16_t tmp; |
| |
| enc424j600_write_sfru(dev, ENC424J600_SFR1_ERXFCONL, |
| ENC424J600_ERXFCON_CRCEN | |
| ENC424J600_ERXFCON_RUNTEN | |
| ENC424J600_ERXFCON_UCEN | |
| ENC424J600_ERXFCON_MCEN | |
| ENC424J600_ERXFCON_BCEN); |
| if (CONFIG_ETHERNET_LOG_LEVEL == LOG_LEVEL_DBG) { |
| enc424j600_read_sfru(dev, ENC424J600_SFR1_ERXFCONL, &tmp); |
| LOG_DBG("ERXFCON: 0x%04x", tmp); |
| } |
| } |
| |
| static void enc424j600_init_phy(struct device *dev) |
| { |
| u16_t tmp; |
| |
| enc424j600_write_phy(dev, ENC424J600_PSFR_PHANA, |
| ENC424J600_PHANA_ADPAUS_SYMMETRIC_ONLY | |
| ENC424J600_PHANA_AD100FD | |
| ENC424J600_PHANA_AD100 | |
| ENC424J600_PHANA_AD10FD | |
| ENC424J600_PHANA_AD10 | |
| ENC424J600_PHANA_ADIEEE_DEFAULT); |
| if (CONFIG_ETHERNET_LOG_LEVEL == LOG_LEVEL_DBG) { |
| enc424j600_read_phy(dev, ENC424J600_PSFR_PHANA, &tmp); |
| LOG_DBG("PHANA: 0x%04x", tmp); |
| } |
| |
| enc424j600_read_phy(dev, ENC424J600_PSFR_PHCON1, &tmp); |
| tmp |= ENC424J600_PHCON1_RENEG; |
| LOG_DBG("PHCON1: 0x%04x", tmp); |
| enc424j600_write_phy(dev, ENC424J600_PSFR_PHCON1, tmp); |
| } |
| |
| static void enc424j600_setup_mac(struct device *dev) |
| { |
| u16_t tmp; |
| u16_t macon2; |
| |
| if (CONFIG_ETHERNET_LOG_LEVEL == LOG_LEVEL_DBG) { |
| enc424j600_read_phy(dev, ENC424J600_PSFR_PHANLPA, &tmp); |
| LOG_DBG("PHANLPA: 0x%04x", tmp); |
| } |
| |
| enc424j600_read_phy(dev, ENC424J600_PSFR_PHSTAT3, &tmp); |
| |
| if (tmp & ENC424J600_PHSTAT3_SPDDPX_100) { |
| LOG_INF("100Mbps"); |
| } else if (tmp & ENC424J600_PHSTAT3_SPDDPX_10) { |
| LOG_INF("10Mbps"); |
| } else { |
| LOG_ERR("Unknown speed configuration"); |
| } |
| |
| if (tmp & ENC424J600_PHSTAT3_SPDDPX_FD) { |
| LOG_INF("full duplex"); |
| enc424j600_read_sfru(dev, ENC424J600_SFR2_MACON2L, &macon2); |
| macon2 |= ENC424J600_MACON2_FULDPX; |
| enc424j600_write_sfru(dev, ENC424J600_SFR2_MACON2L, macon2); |
| enc424j600_write_sfru(dev, ENC424J600_SFR2_MABBIPGL, |
| ENC424J600_MABBIPG_DEFAULT); |
| |
| } else { |
| LOG_INF("half duplex"); |
| } |
| |
| if (CONFIG_ETHERNET_LOG_LEVEL == LOG_LEVEL_DBG) { |
| enc424j600_read_sfru(dev, ENC424J600_SFR2_MACON2L, &tmp); |
| LOG_DBG("MACON2: 0x%04x", tmp); |
| |
| enc424j600_read_sfru(dev, ENC424J600_SFR2_MAMXFLL, &tmp); |
| LOG_DBG("MAMXFL (maximum frame length): %u", tmp); |
| } |
| } |
| |
| static int enc424j600_tx(struct device *dev, struct net_pkt *pkt) |
| { |
| struct enc424j600_runtime *context = dev->driver_data; |
| u16_t len = net_pkt_get_len(pkt); |
| struct net_buf *frag; |
| u16_t tmp; |
| |
| LOG_DBG("pkt %p (len %u)", pkt, len); |
| |
| k_sem_take(&context->tx_rx_sem, K_FOREVER); |
| |
| enc424j600_write_sfru(dev, ENC424J600_SFR4_EGPWRPTL, |
| ENC424J600_TXSTART); |
| |
| for (frag = pkt->frags; frag; frag = frag->frags) { |
| enc424j600_write_mem(dev, ENC424J600_NBC_WGPDATA, frag->data, |
| frag->len); |
| } |
| |
| enc424j600_write_sfru(dev, ENC424J600_SFR0_ETXSTL, |
| ENC424J600_TXSTART); |
| enc424j600_write_sfru(dev, ENC424J600_SFR0_ETXLENL, len); |
| enc424j600_write_sbc(dev, ENC424J600_1BC_SETTXRTS); |
| |
| do { |
| k_sleep(K_MSEC(1)); |
| enc424j600_read_sfru(dev, ENC424J600_SFRX_ECON1L, &tmp); |
| } while (tmp & ENC424J600_ECON1_TXRTS); |
| |
| if (CONFIG_ETHERNET_LOG_LEVEL == LOG_LEVEL_DBG) { |
| enc424j600_read_sfru(dev, ENC424J600_SFR0_ETXSTATL, &tmp); |
| LOG_DBG("ETXSTAT: 0x%04x", tmp); |
| } |
| |
| k_sem_give(&context->tx_rx_sem); |
| |
| return 0; |
| } |
| |
| static int enc424j600_rx(struct device *dev) |
| { |
| struct enc424j600_runtime *context = dev->driver_data; |
| const struct enc424j600_config *config = dev->config->config_info; |
| u8_t info[ENC424J600_RSV_SIZE + ENC424J600_PTR_NXP_PKT_SIZE]; |
| struct net_buf *pkt_buf = NULL; |
| struct net_pkt *pkt; |
| u16_t frm_len = 0U; |
| u32_t status; |
| u16_t tmp; |
| |
| k_sem_take(&context->tx_rx_sem, K_FOREVER); |
| |
| enc424j600_write_sfru(dev, ENC424J600_SFR4_ERXRDPTL, |
| context->next_pkt_ptr); |
| if (CONFIG_ETHERNET_LOG_LEVEL == LOG_LEVEL_DBG) { |
| enc424j600_read_sfru(dev, ENC424J600_SFR4_ERXRDPTL, &tmp); |
| LOG_DBG("set ERXRDPT to 0x%04x", tmp); |
| } |
| |
| enc424j600_read_mem(dev, ENC424J600_NBC_RRXDATA, info, |
| sizeof(info)); |
| |
| if (CONFIG_ETHERNET_LOG_LEVEL == LOG_LEVEL_DBG) { |
| enc424j600_read_sfru(dev, ENC424J600_SFR4_ERXRDPTL, &tmp); |
| LOG_DBG("ERXRDPT is 0x%04x now", tmp); |
| } |
| |
| context->next_pkt_ptr = sys_get_le16(&info[0]); |
| frm_len = sys_get_le16(&info[2]); |
| status = sys_get_le32(&info[4]); |
| LOG_DBG("npp 0x%04x, length %u, status 0x%08x", |
| context->next_pkt_ptr, frm_len, status); |
| /* frame length without FCS */ |
| frm_len -= 4; |
| if (frm_len > NET_ETH_MAX_FRAME_SIZE) { |
| LOG_ERR("Maximum frame length exceeded"); |
| eth_stats_update_errors_rx(context->iface); |
| goto done; |
| } |
| |
| /* Get the frame from the buffer */ |
| pkt = net_pkt_rx_alloc_with_buffer(context->iface, frm_len, |
| AF_UNSPEC, 0, |
| config->timeout); |
| if (!pkt) { |
| LOG_ERR("Could not allocate rx buffer"); |
| eth_stats_update_errors_rx(context->iface); |
| goto done; |
| } |
| |
| pkt_buf = pkt->buffer; |
| |
| do { |
| size_t frag_len; |
| u8_t *data_ptr; |
| size_t spi_frame_len; |
| |
| data_ptr = pkt_buf->data; |
| |
| /* Review the space available for the new frag */ |
| frag_len = net_buf_tailroom(pkt_buf); |
| |
| if (frm_len > frag_len) { |
| spi_frame_len = frag_len; |
| } else { |
| spi_frame_len = frm_len; |
| } |
| |
| enc424j600_read_mem(dev, ENC424J600_NBC_RRXDATA, data_ptr, |
| spi_frame_len); |
| |
| net_buf_add(pkt_buf, spi_frame_len); |
| |
| /* One fragment has been written via SPI */ |
| frm_len -= spi_frame_len; |
| pkt_buf = pkt_buf->frags; |
| } while (frm_len > 0); |
| |
| if (net_recv_data(context->iface, pkt) < 0) { |
| net_pkt_unref(pkt); |
| } |
| |
| done: |
| if (context->next_pkt_ptr == ENC424J600_RXSTART) { |
| tmp = ENC424J600_RXEND - 1; |
| LOG_DBG("wrap back"); |
| } else { |
| tmp = context->next_pkt_ptr - 2; |
| } |
| |
| enc424j600_write_sfru(dev, ENC424J600_SFR0_ERXTAILL, tmp); |
| enc424j600_write_sbc(dev, ENC424J600_1BC_SETPKTDEC); |
| k_sem_give(&context->tx_rx_sem); |
| |
| return 0; |
| } |
| |
| static void enc424j600_rx_thread(struct device *dev) |
| { |
| struct enc424j600_runtime *context = dev->driver_data; |
| u16_t eir; |
| u16_t estat; |
| u8_t counter; |
| |
| while (true) { |
| k_sem_take(&context->int_sem, K_FOREVER); |
| |
| enc424j600_clear_sfru(dev, ENC424J600_SFR3_EIEL, |
| ENC424J600_EIE_INTIE); |
| enc424j600_read_sfru(dev, ENC424J600_SFRX_EIRL, &eir); |
| enc424j600_read_sfru(dev, ENC424J600_SFRX_ESTATL, &estat); |
| LOG_DBG("ESTAT: 0x%04x", estat); |
| |
| if (eir & ENC424J600_EIR_PKTIF) { |
| counter = (u8_t)estat; |
| while (counter) { |
| enc424j600_rx(dev); |
| enc424j600_read_sfru(dev, |
| ENC424J600_SFRX_ESTATL, |
| &estat); |
| counter = (u8_t)estat; |
| LOG_DBG("ESTAT: 0x%04x", estat); |
| } |
| goto done; |
| } |
| |
| if (eir & ENC424J600_EIR_LINKIF) { |
| enc424j600_clear_sfru(dev, ENC424J600_SFRX_EIRL, |
| ENC424J600_EIR_LINKIF); |
| if (estat & ENC424J600_ESTAT_PHYLNK) { |
| LOG_INF("Link up"); |
| enc424j600_setup_mac(dev); |
| net_eth_carrier_on(context->iface); |
| } else { |
| LOG_INF("Link down"); |
| |
| if (context->iface_initialized) { |
| net_eth_carrier_off(context->iface); |
| } |
| } |
| goto done; |
| } |
| |
| LOG_ERR("Unknown Interrupt, EIR: 0x%04x", eir); |
| |
| done: |
| enc424j600_set_sfru(dev, ENC424J600_SFR3_EIEL, |
| ENC424J600_EIE_INTIE); |
| } |
| } |
| |
| static enum ethernet_hw_caps enc424j600_get_capabilities(struct device *dev) |
| { |
| ARG_UNUSED(dev); |
| |
| return ETHERNET_LINK_10BASE_T | ETHERNET_LINK_100BASE_T; |
| } |
| |
| static void enc424j600_iface_init(struct net_if *iface) |
| { |
| struct device *dev = net_if_get_device(iface); |
| struct enc424j600_runtime *context = dev->driver_data; |
| |
| net_if_set_link_addr(iface, context->mac_address, |
| sizeof(context->mac_address), |
| NET_LINK_ETHERNET); |
| context->iface = iface; |
| ethernet_init(iface); |
| |
| net_if_flag_set(iface, NET_IF_NO_AUTO_START); |
| context->iface_initialized = true; |
| } |
| |
| static int enc424j600_start_device(struct device *dev) |
| { |
| struct enc424j600_runtime *context = dev->driver_data; |
| u16_t tmp; |
| |
| if (!context->suspended) { |
| LOG_INF("Not suspended"); |
| return 0; |
| } |
| |
| k_sem_take(&context->tx_rx_sem, K_FOREVER); |
| |
| enc424j600_set_sfru(dev, ENC424J600_SFR3_ECON2L, |
| ENC424J600_ECON2_ETHEN | |
| ENC424J600_ECON2_STRCH); |
| |
| enc424j600_read_phy(dev, ENC424J600_PSFR_PHCON1, &tmp); |
| tmp &= ~ENC424J600_PHCON1_PSLEEP; |
| enc424j600_write_phy(dev, ENC424J600_PSFR_PHCON1, tmp); |
| |
| enc424j600_set_sfru(dev, ENC424J600_SFRX_ECON1L, |
| ENC424J600_ECON1_RXEN); |
| |
| context->suspended = false; |
| k_sem_give(&context->tx_rx_sem); |
| LOG_INF("started"); |
| |
| return 0; |
| } |
| |
| static int enc424j600_stop_device(struct device *dev) |
| { |
| struct enc424j600_runtime *context = dev->driver_data; |
| u16_t tmp; |
| |
| if (context->suspended) { |
| LOG_WRN("Already suspended"); |
| return 0; |
| } |
| |
| k_sem_take(&context->tx_rx_sem, K_FOREVER); |
| |
| enc424j600_clear_sfru(dev, ENC424J600_SFRX_ECON1L, |
| ENC424J600_ECON1_RXEN); |
| |
| do { |
| k_sleep(K_MSEC(10U)); |
| enc424j600_read_sfru(dev, ENC424J600_SFRX_ESTATL, &tmp); |
| } while (tmp & ENC424J600_ESTAT_RXBUSY); |
| |
| do { |
| k_sleep(K_MSEC(10U)); |
| enc424j600_read_sfru(dev, ENC424J600_SFRX_ECON1L, &tmp); |
| } while (tmp & ENC424J600_ECON1_TXRTS); |
| |
| enc424j600_read_phy(dev, ENC424J600_PSFR_PHCON1, &tmp); |
| tmp |= ENC424J600_PHCON1_PSLEEP; |
| enc424j600_write_phy(dev, ENC424J600_PSFR_PHCON1, tmp); |
| |
| enc424j600_clear_sfru(dev, ENC424J600_SFR3_ECON2L, |
| ENC424J600_ECON2_ETHEN | |
| ENC424J600_ECON2_STRCH); |
| |
| context->suspended = true; |
| k_sem_give(&context->tx_rx_sem); |
| LOG_INF("stopped"); |
| |
| return 0; |
| } |
| |
| static const struct ethernet_api api_funcs = { |
| .iface_api.init = enc424j600_iface_init, |
| |
| .get_capabilities = enc424j600_get_capabilities, |
| .send = enc424j600_tx, |
| .start = enc424j600_start_device, |
| .stop = enc424j600_stop_device, |
| }; |
| |
| static int enc424j600_init(struct device *dev) |
| { |
| const struct enc424j600_config *config = dev->config->config_info; |
| struct enc424j600_runtime *context = dev->driver_data; |
| u8_t retries = ENC424J600_DEFAULT_NUMOF_RETRIES; |
| u16_t tmp; |
| |
| /* SPI config */ |
| context->spi_cfg.operation = SPI_WORD_SET(8); |
| context->spi_cfg.frequency = config->spi_freq; |
| context->spi_cfg.slave = config->spi_slave; |
| |
| context->spi = device_get_binding((char *)config->spi_port); |
| if (!context->spi) { |
| LOG_ERR("SPI master port %s not found", config->spi_port); |
| return -EINVAL; |
| } |
| |
| #ifdef CONFIG_ETH_ENC424J600_0_GPIO_SPI_CS |
| context->spi_cs.gpio_dev = |
| device_get_binding((char *)config->spi_cs_port); |
| if (!context->spi_cs.gpio_dev) { |
| LOG_ERR("SPI CS port %s not found", config->spi_cs_port); |
| return -EINVAL; |
| } |
| |
| context->spi_cs.gpio_pin = config->spi_cs_pin; |
| context->spi_cfg.cs = &context->spi_cs; |
| #endif /* CONFIG_ETH_ENC424J600_0_GPIO_SPI_CS */ |
| |
| /* Initialize GPIO */ |
| context->gpio = device_get_binding((char *)config->gpio_port); |
| if (!context->gpio) { |
| LOG_ERR("GPIO port %s not found", config->gpio_port); |
| return -EINVAL; |
| } |
| |
| if (gpio_pin_configure(context->gpio, config->gpio_pin, |
| (GPIO_DIR_IN | GPIO_INT | GPIO_INT_EDGE |
| | GPIO_INT_ACTIVE_LOW | GPIO_INT_DEBOUNCE))) { |
| LOG_ERR("Unable to configure GPIO pin %u", |
| config->gpio_pin); |
| return -EINVAL; |
| } |
| |
| gpio_init_callback(&(context->gpio_cb), enc424j600_gpio_callback, |
| BIT(config->gpio_pin)); |
| |
| if (gpio_add_callback(context->gpio, &(context->gpio_cb))) { |
| return -EINVAL; |
| } |
| |
| if (gpio_pin_enable_callback(context->gpio, config->gpio_pin)) { |
| return -EINVAL; |
| } |
| |
| /* Check SPI connection */ |
| do { |
| k_busy_wait(USEC_PER_MSEC * 1U); |
| enc424j600_write_sfru(dev, ENC424J600_SFRX_EUDASTL, 0x4AFE); |
| enc424j600_read_sfru(dev, ENC424J600_SFRX_EUDASTL, &tmp); |
| retries--; |
| } while (tmp != 0x4AFE && retries); |
| |
| if (tmp != 0x4AFE) { |
| LOG_ERR("Timeout, failed to establish SPI connection"); |
| return -EIO; |
| } |
| |
| retries = ENC424J600_DEFAULT_NUMOF_RETRIES; |
| do { |
| k_busy_wait(USEC_PER_MSEC * 1U); |
| enc424j600_read_sfru(dev, ENC424J600_SFRX_ESTATL, &tmp); |
| retries--; |
| } while (!(tmp & ENC424J600_ESTAT_CLKRDY) && retries); |
| |
| if (!(tmp & ENC424J600_ESTAT_CLKRDY)) { |
| LOG_ERR("CLKRDY not set"); |
| return -EIO; |
| } |
| |
| enc424j600_write_sbc(dev, ENC424J600_1BC_SETETHRST); |
| |
| k_busy_wait(ENC424J600_PHY_READY_DELAY); |
| enc424j600_read_sfru(dev, ENC424J600_SFRX_EUDASTL, &tmp); |
| if (tmp) { |
| LOG_ERR("Failed to initialize ENC424J600"); |
| return -EIO; |
| } |
| |
| /* Configure TX and RX buffer */ |
| enc424j600_write_sfru(dev, ENC424J600_SFR0_ETXSTL, |
| ENC424J600_TXSTART); |
| enc424j600_write_sfru(dev, ENC424J600_SFR0_ERXSTL, |
| ENC424J600_RXSTART); |
| enc424j600_write_sfru(dev, ENC424J600_SFR0_ERXTAILL, |
| (ENC424J600_RXEND - 1)); |
| context->next_pkt_ptr = ENC424J600_RXSTART; |
| |
| /* Disable user-defined buffer */ |
| enc424j600_write_sfru(dev, ENC424J600_SFRX_EUDASTL, |
| (ENC424J600_RXEND - 1)); |
| enc424j600_write_sfru(dev, ENC424J600_SFRX_EUDANDL, |
| (ENC424J600_RXEND - 1)); |
| |
| /* read MAC address byte 2 and 1 */ |
| enc424j600_read_sfru(dev, ENC424J600_SFR3_MAADR1L, &tmp); |
| context->mac_address[0] = tmp; |
| context->mac_address[1] = tmp >> 8; |
| /* read MAC address byte 4 and 3 */ |
| enc424j600_read_sfru(dev, ENC424J600_SFR3_MAADR2L, &tmp); |
| context->mac_address[2] = tmp; |
| context->mac_address[3] = tmp >> 8; |
| /* read MAC address byte 6 and 5 */ |
| enc424j600_read_sfru(dev, ENC424J600_SFR3_MAADR3L, &tmp); |
| context->mac_address[4] = tmp; |
| context->mac_address[5] = tmp >> 8; |
| |
| enc424j600_init_filters(dev); |
| enc424j600_init_phy(dev); |
| |
| /* Setup interrupt logic */ |
| enc424j600_set_sfru(dev, ENC424J600_SFR3_EIEL, |
| ENC424J600_EIE_PKTIE | ENC424J600_EIE_LINKIE); |
| |
| if (CONFIG_ETHERNET_LOG_LEVEL == LOG_LEVEL_DBG) { |
| enc424j600_read_sfru(dev, ENC424J600_SFR3_EIEL, &tmp); |
| LOG_DBG("EIE: 0x%04x", tmp); |
| } |
| |
| /* Enable Reception */ |
| enc424j600_set_sfru(dev, ENC424J600_SFRX_ECON1L, ENC424J600_ECON1_RXEN); |
| if (CONFIG_ETHERNET_LOG_LEVEL == LOG_LEVEL_DBG) { |
| enc424j600_read_sfru(dev, ENC424J600_SFRX_ECON1L, &tmp); |
| LOG_DBG("ECON1: 0x%04x", tmp); |
| } |
| |
| /* Start interruption-poll thread */ |
| k_thread_create(&context->thread, context->thread_stack, |
| CONFIG_ETH_ENC424J600_RX_THREAD_STACK_SIZE, |
| (k_thread_entry_t)enc424j600_rx_thread, |
| (void *)dev, NULL, NULL, |
| K_PRIO_COOP(CONFIG_ETH_ENC424J600_RX_THREAD_PRIO), |
| 0, K_NO_WAIT); |
| |
| enc424j600_set_sfru(dev, ENC424J600_SFR3_EIEL, |
| ENC424J600_EIE_INTIE); |
| |
| context->suspended = false; |
| LOG_INF("ENC424J600 Initialized"); |
| |
| return 0; |
| } |
| |
| static struct enc424j600_runtime enc424j600_0_runtime = { |
| .tx_rx_sem = Z_SEM_INITIALIZER(enc424j600_0_runtime.tx_rx_sem, |
| 1, UINT_MAX), |
| .int_sem = Z_SEM_INITIALIZER(enc424j600_0_runtime.int_sem, |
| 0, UINT_MAX), |
| }; |
| |
| static const struct enc424j600_config enc424j600_0_config = { |
| .gpio_port = DT_INST_0_MICROCHIP_ENC424J600_INT_GPIOS_CONTROLLER, |
| .gpio_pin = DT_INST_0_MICROCHIP_ENC424J600_INT_GPIOS_PIN, |
| .spi_port = DT_INST_0_MICROCHIP_ENC424J600_BUS_NAME, |
| .spi_freq = DT_INST_0_MICROCHIP_ENC424J600_SPI_MAX_FREQUENCY, |
| .spi_slave = DT_INST_0_MICROCHIP_ENC424J600_BASE_ADDRESS, |
| #ifdef CONFIG_ETH_ENC424J600_0_GPIO_SPI_CS |
| .spi_cs_port = DT_INST_0_MICROCHIP_ENC424J600_CS_GPIOS_CONTROLLER, |
| .spi_cs_pin = DT_INST_0_MICROCHIP_ENC424J600_CS_GPIOS_PIN, |
| #endif /* CONFIG_ETH_ENC424J600_0_GPIO_SPI_CS */ |
| .timeout = CONFIG_ETH_ENC424J600_TIMEOUT, |
| }; |
| |
| ETH_NET_DEVICE_INIT(enc424j600_0, DT_INST_0_MICROCHIP_ENC424J600_LABEL, |
| enc424j600_init, &enc424j600_0_runtime, |
| &enc424j600_0_config, CONFIG_ETH_INIT_PRIORITY, &api_funcs, |
| NET_ETH_MTU); |