| /* ssd16xx_regs.h - Registers definition for SSD16XX compatible controller */ |
| |
| /* |
| * Copyright (c) 2018 PHYTEC Messtechnik GmbH |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #ifndef __SSD16XX_REGS_H__ |
| #define __SSD16XX_REGS_H__ |
| |
| #define SSD16XX_CMD_GDO_CTRL 0x01 |
| #define SSD16XX_CMD_GDV_CTRL 0x03 |
| #define SSD16XX_CMD_SDV_CTRL 0x04 |
| #define SSD16XX_CMD_SOFTSTART 0x0c |
| #define SSD16XX_CMD_GSCAN_START 0x0f |
| #define SSD16XX_CMD_SLEEP_MODE 0x10 |
| #define SSD16XX_CMD_ENTRY_MODE 0x11 |
| #define SSD16XX_CMD_SW_RESET 0x12 |
| #define SSD16XX_CMD_TSENSOR_SELECTION 0x18 |
| #define SSD16XX_CMD_TSENS_CTRL 0x1a |
| #define SSD16XX_CMD_MASTER_ACTIVATION 0x20 |
| #define SSD16XX_CMD_UPDATE_CTRL1 0x21 |
| #define SSD16XX_CMD_UPDATE_CTRL2 0x22 |
| #define SSD16XX_CMD_WRITE_RAM 0x24 |
| #define SSD16XX_CMD_WRITE_RED_RAM 0x26 |
| #define SSD16XX_CMD_VCOM_SENSE 0x28 |
| #define SSD16XX_CMD_VCOM_SENSE_DURATON 0x29 |
| #define SSD16XX_CMD_PRGM_VCOM_OTP 0x2a |
| #define SSD16XX_CMD_VCOM_VOLTAGE 0x2c |
| #define SSD16XX_CMD_PRGM_WS_OTP 0x30 |
| #define SSD16XX_CMD_LOAD_WS_OTP 0x31 |
| #define SSD16XX_CMD_UPDATE_LUT 0x32 |
| #define SSD16XX_CMD_PRGM_OTP_SELECTION 0x36 |
| #define SSD16XX_CMD_OTP_SELECTION_CTRL 0x37 |
| #define SSD16XX_CMD_DUMMY_LINE 0x3a |
| #define SSD16XX_CMD_GATE_LINE_WIDTH 0x3b |
| #define SSD16XX_CMD_BWF_CTRL 0x3c |
| #define SSD16XX_CMD_RAM_XPOS_CTRL 0x44 |
| #define SSD16XX_CMD_RAM_YPOS_CTRL 0x45 |
| #define SSD16XX_CMD_RAM_XPOS_CNTR 0x4e |
| #define SSD16XX_CMD_RAM_YPOS_CNTR 0x4f |
| |
| /* Data entry sequence modes */ |
| #define SSD16XX_DATA_ENTRY_MASK 0x07 |
| #define SSD16XX_DATA_ENTRY_XDYDX 0x00 |
| #define SSD16XX_DATA_ENTRY_XIYDX 0x01 |
| #define SSD16XX_DATA_ENTRY_XDYIX 0x02 |
| #define SSD16XX_DATA_ENTRY_XIYIX 0x03 |
| #define SSD16XX_DATA_ENTRY_XDYDY 0x04 |
| #define SSD16XX_DATA_ENTRY_XIYDY 0x05 |
| #define SSD16XX_DATA_ENTRY_XDYIY 0x06 |
| #define SSD16XX_DATA_ENTRY_XIYIY 0x07 |
| |
| /* Options for display update */ |
| #define SSD16XX_CTRL1_INITIAL_UPDATE_LL 0x00 |
| #define SSD16XX_CTRL1_INITIAL_UPDATE_LH 0x01 |
| #define SSD16XX_CTRL1_INITIAL_UPDATE_HL 0x02 |
| #define SSD16XX_CTRL1_INITIAL_UPDATE_HH 0x03 |
| |
| /* Options for display update sequence */ |
| #define SSD16XX_CTRL2_ENABLE_CLK 0x80 |
| #define SSD16XX_CTRL2_ENABLE_ANALOG 0x40 |
| #define SSD16XX_CTRL2_LOAD_TEMPERATURE 0x20 |
| #define SSD16XX_CTRL2_LOAD_LUT 0x10 |
| #define SSD16XX_CTRL2_TO_INITIAL 0x08 |
| #define SSD16XX_CTRL2_TO_PATTERN 0x04 |
| #define SSD16XX_CTRL2_DISABLE_ANALOG 0x02 |
| #define SSD16XX_CTRL2_DISABLE_CLK 0x01 |
| |
| #define SSD16XX_SLEEP_MODE_DSM 0x01 |
| #define SSD16XX_SLEEP_MODE_PON 0x00 |
| |
| /* Default values */ |
| #define SSD16XX_VAL_DUMMY_LINE 0x1a |
| #define SSD16XX_VAL_GATE_LWIDTH 0x08 |
| |
| /* time constants in ms */ |
| #define SSD16XX_RESET_DELAY 1 |
| #define SSD16XX_BUSY_DELAY 1 |
| |
| #endif /* __SSD16XX_REGS_H__ */ |
