| /* | 
 |  * Copyright (c) 2017 Christian Taedcke | 
 |  * | 
 |  * SPDX-License-Identifier: Apache-2.0 | 
 |  */ | 
 |  | 
 | /dts-v1/; | 
 | #include <silabs/efm32pg12b500f1024gl125.dtsi> | 
 |  | 
 | / { | 
 | 	model = "Silicon Labs EFM32PG STK3402A board"; | 
 | 	compatible = "silabs,efm32pg_stk3402a", "silabs,efm32pg12b"; | 
 |  | 
 | 	chosen { | 
 | 		zephyr,console = &usart0; | 
 | 		zephyr,shell-uart = &usart0; | 
 | 		zephyr,sram = &sram0; | 
 | 		zephyr,flash = &flash0; | 
 | 	}; | 
 |  | 
 | 	/* These aliases are provided for compatibility with samples */ | 
 | 	aliases { | 
 | 		led0 = &led0; | 
 | 		led1 = &led1; | 
 | 		sw0 = &button0; | 
 | 		sw1 = &button1; | 
 | 	}; | 
 |  | 
 | 	leds { | 
 | 		compatible = "gpio-leds"; | 
 | 		led0: led_0 { | 
 | 			gpios = <&gpiof 4 0>; | 
 | 			label = "LED 0"; | 
 | 		}; | 
 | 		led1: led_1 { | 
 | 			gpios = <&gpiof 5 0>; | 
 | 			label = "LED 1"; | 
 | 		}; | 
 | 	}; | 
 |  | 
 | 	buttons { | 
 | 		compatible = "gpio-keys"; | 
 | 		button0: button_0 { | 
 | 			/* gpio flags need validation */ | 
 | 			gpios = <&gpiof 6 GPIO_INT_ACTIVE_LOW>; | 
 | 			label = "User Push Button 0"; | 
 | 		}; | 
 | 		button1: button_1 { | 
 | 			/* gpio flags need validation */ | 
 | 			gpios = <&gpiof 7 GPIO_INT_ACTIVE_LOW>; | 
 | 			label = "User Push Button 1"; | 
 | 		}; | 
 | 	}; | 
 | }; | 
 |  | 
 | &cpu0 { | 
 | 	clock-frequency = <40000000>; | 
 | }; | 
 |  | 
 | &usart0 { | 
 | 	current-speed = <115200>; | 
 | 	location-rx = <GECKO_LOCATION(0) GECKO_PORT_A GECKO_PIN(1)>; | 
 | 	location-tx = <GECKO_LOCATION(0) GECKO_PORT_A GECKO_PIN(0)>; | 
 | 	status = "okay"; | 
 | }; | 
 |  | 
 | &leuart0 { | 
 | 	current-speed = <9600>; | 
 | 	location-rx = <GECKO_LOCATION(18) GECKO_PORT_D GECKO_PIN(11)>; | 
 | 	location-tx = <GECKO_LOCATION(18) GECKO_PORT_D GECKO_PIN(10)>; | 
 | 	status = "okay"; | 
 | }; | 
 |  | 
 | &i2c0 { | 
 | 	location-sda = <GECKO_LOCATION(15) GECKO_PORT_C GECKO_PIN(10)>; | 
 | 	location-scl = <GECKO_LOCATION(15) GECKO_PORT_C GECKO_PIN(11)>; | 
 | 	status = "okay"; | 
 | }; | 
 |  | 
 | &rtcc0 { | 
 | 	prescaler = <1>; | 
 | 	status = "okay"; | 
 | }; | 
 |  | 
 | &gpio { | 
 | 	location-swo = <0>; | 
 | 	status = "okay"; | 
 | }; | 
 |  | 
 | &flash0 { | 
 | 	/* | 
 | 	 * For more information, see: | 
 | 	 * http://docs.zephyrproject.org/latest/guides/dts/index.html#flash-partitions | 
 | 	 */ | 
 | 	partitions { | 
 | 		compatible = "fixed-partitions"; | 
 | 		#address-cells = <1>; | 
 | 		#size-cells = <1>; | 
 |  | 
 | 		/* Set 4Kb of storage at the end of the 1024Kb of flash */ | 
 | 		storage_partition: partition@ff000 { | 
 | 			label = "storage"; | 
 | 			reg = <0x000ff000 0x00001000>; | 
 | 		}; | 
 |  | 
 | 	}; | 
 | }; |