| # TI CC13xx / CC26xx IEEE 802.15.4 configuration options |
| |
| # Copyright (c) 2019 Brett Witherspoon |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| menuconfig IEEE802154_CC13XX_CC26XX |
| bool "TI CC13xx / CC26xx IEEE 802.15.4 driver support" |
| select CRC |
| default y |
| depends on DT_HAS_TI_CC13XX_CC26XX_IEEE802154_ENABLED |
| |
| if IEEE802154_CC13XX_CC26XX |
| |
| config IEEE802154_CC13XX_CC26XX_INIT_PRIO |
| int "TI CC13xx / CC26xx IEEE 802.15.4 initialization priority" |
| default 80 |
| help |
| Set the initialization priority number. |
| |
| config IEEE802154_CC13XX_CC26XX_RADIO_TX_RETRIES |
| int "Radio Transmission attempts" |
| default NET_L2_IEEE802154_RADIO_TX_RETRIES if NET_L2_IEEE802154 |
| default 3 |
| range 1 7 |
| help |
| Number of transmission attempts radio driver should do, before |
| replying it could not send the packet. |
| |
| config IEEE802154_CC13XX_CC26XX_RADIO_CSMA_CA_MAX_BO |
| int "CSMA maximum backoffs" |
| default NET_L2_IEEE802154_RADIO_CSMA_CA_MAX_BO if NET_L2_IEEE802154_RADIO_CSMA_CA |
| default 4 |
| range 1 5 |
| help |
| The maximum number of backoffs the CSMA-CA algorithm will attempt |
| before declaring a channel access failure. |
| |
| config IEEE802154_CC13XX_CC26XX_RADIO_CSMA_CA_MIN_BE |
| int "CSMA MAC minimum backoff exponent" |
| default NET_L2_IEEE802154_RADIO_CSMA_CA_MIN_BE if NET_L2_IEEE802154_RADIO_CSMA_CA |
| default 3 |
| range 1 8 |
| help |
| The minimum value of the backoff exponent (BE) in the CSMA-CA |
| algorithm. |
| |
| config IEEE802154_CC13XX_CC26XX_RADIO_CSMA_CA_MAX_BE |
| int "CSMA MAC maximum backoff exponent" |
| default NET_L2_IEEE802154_RADIO_CSMA_CA_MAX_BE if NET_L2_IEEE802154_RADIO_CSMA_CA |
| default 5 |
| range 1 8 |
| help |
| The maximum value of the backoff exponent (BE) in the CSMA-CA |
| algorithm. |
| |
| endif # IEEE802154_CC13XX_CC26XX |
| |
| menuconfig IEEE802154_CC13XX_CC26XX_SUB_GHZ |
| bool "TI CC13xx / CC26xx IEEE 802.15.4g driver support" |
| default y |
| depends on DT_HAS_TI_CC13XX_CC26XX_IEEE802154_SUBGHZ_ENABLED |
| select NET_L2_IEEE802154_SUB_GHZ if NET_L2_IEEE802154 |
| |
| if IEEE802154_CC13XX_CC26XX_SUB_GHZ |
| |
| config IEEE802154_CC13XX_CC26XX_SUB_GHZ_NUM_RX_BUF |
| int "TI CC13xx / CC26xx IEEE 802.15.4g receive buffer count" |
| default 2 |
| help |
| This option allows the user to configure the number of |
| receive buffers. |
| |
| config IEEE802154_CC13XX_CC26XX_SUB_GHZ_CS_THRESHOLD |
| int "TI CC13xx / CC26xx IEEE 802.15.4g Carrier Sense Threshold in dBm" |
| default -70 |
| help |
| This option sets RSSI threshold for carrier sense in the CSMA/CA |
| algorithm. |
| |
| config IEEE802154_CC13XX_CC26XX_SUB_GHZ_INIT_PRIO |
| int "TI CC13xx / CC26xx IEEE 802.15.4g initialization priority" |
| default 80 |
| help |
| Set the initialization priority number. |
| |
| config IEEE802154_CC13XX_CC26XX_SUB_GHZ_RADIO_TX_RETRIES |
| int "Radio Transmission attempts" |
| default NET_L2_IEEE802154_RADIO_TX_RETRIES if NET_L2_IEEE802154 |
| default 3 |
| range 1 7 |
| help |
| Number of transmission attempts radio driver should do, before |
| replying it could not send the packet. |
| |
| endif # IEEE802154_CC13XX_CC26XX_SUB_GHZ |
