| # Thread network configuration options |
| |
| # Copyright (c) 2020 Nordic Semiconductor ASA |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| config OPENTHREAD_PANID |
| int "Default PAN ID" |
| default 43981 |
| |
| config OPENTHREAD_CHANNEL |
| int "Default Channel" |
| default 11 |
| |
| config OPENTHREAD_NETWORK_NAME |
| string "Default network name" |
| default "ot_zephyr" |
| help |
| Network name for OpenThread |
| |
| config OPENTHREAD_XPANID |
| string "Default Extended PAN ID" |
| default "de:ad:00:be:ef:00:ca:fe" |
| help |
| Extended PAN ID for OpenThread with |
| format "de:ad:00:be:ef:00:ca:fe" |
| |
| config OPENTHREAD_NETWORKKEY |
| string "Default Thread Network Key" |
| help |
| Network Key for OpenThread with format |
| "00:11:22:33:44:55:66:77:88:99:aa:bb:cc:dd:ee:ff" |
| |
| config OPENTHREAD_JOINER_AUTOSTART |
| bool "Automatic joiner start" |
| depends on OPENTHREAD_JOINER |
| |
| config OPENTHREAD_JOINER_PSKD |
| string "Default pre shared key for the Joiner" |
| depends on OPENTHREAD_JOINER_AUTOSTART |
| default "J01NME" |
| |
| choice OPENTHREAD_DEVICE_TYPE |
| prompt "OpenThread device type" |
| help |
| This option selects Thread network device type |
| |
| config OPENTHREAD_FTD |
| bool "FTD - Full Thread Device" |
| config OPENTHREAD_MTD |
| bool "MTD - Minimal Thread Device" |
| endchoice |
| |
| config OPENTHREAD_MTD_SED |
| bool "SED - Sleepy End Device" |
| depends on OPENTHREAD_MTD |
| |
| config OPENTHREAD_POLL_PERIOD |
| int "Poll period for sleepy end devices [ms]" |
| default 236000 |
| depends on OPENTHREAD_MTD_SED |
| |
| config OPENTHREAD_MAX_CHILDREN |
| int "The maximum number of children" |
| range 1 511 |
| default 1 if OPENTHREAD_MTD |
| default 32 |
| |
| config OPENTHREAD_MAX_IP_ADDR_PER_CHILD |
| int "The maximum number of IPv6 address registrations per child" |
| range 4 255 |
| default 6 |
| depends on OPENTHREAD_FTD |
| |
| config OPENTHREAD_CONFIG_PLATFORM_INFO |
| string "The platform-specific string to insert into the OpenThread version string" |
| default "Zephyr" |
| |
| config OPENTHREAD_RADIO_LINK_IEEE_802_15_4_ENABLE |
| bool "Support for IEEE802.15.4 radio link" |
| default y |
| |
| config OPENTHREAD_RADIO_LINK_TREL_ENABLE |
| bool "Thread Radio Encapsulation Link (TREL)" |
| |
| config OPENTHREAD_CSL_AUTO_SYNC |
| bool "CSL autosync" |
| default y if OPENTHREAD_CSL_RECEIVER |
| |
| config OPENTHREAD_CSL_RECEIVE_TIME_AHEAD |
| int "CSL receiver wake up margin in units of 10 symbols" |
| default 480 |
| |
| config OPENTHREAD_CSL_MIN_RECEIVE_ON |
| int "Minimum CSL receive window" |
| default 5696 |
| help |
| The minimum CSL receive window (in microseconds) required to receive a full IEEE 802.15.4 frame |
| |
| config OPENTHREAD_PLATFORM_CSL_UNCERT |
| int "CSL uncertainty" |
| default 255 |
| range 0 255 |
| help |
| The fixed uncertainty of the Device for scheduling CSL Transmissions in units of 10 microseconds. |
| |
| config OPENTHREAD_MAC_SOFTWARE_TX_SECURITY_ENABLE |
| bool "Software transmission security logic" |
| default y if !OPENTHREAD_THREAD_VERSION_1_1 |
| |
| config OPENTHREAD_MLE_INFORM_PREVIOUS_PARENT_ON_REATTACH |
| bool "Inform previous parent on reattach" |
| default y if OPENTHREAD_PARENT_SEARCH |
| help |
| To allow end devices (EDs) in a Thread network to inform their |
| previous parent router that they have attached to a new parent |
| router, enable the Inform Previous Parent on Reattach feature. |
| |
| config OPENTHREAD_PARENT_SEARCH |
| bool "Periodic parent search support" |
| help |
| To allow end devices (EDs) in a Thread network to switch to a |
| better parent router than their current one—while still attached |
| to the network—enable the Periodic Parent Search feature. |
| |
| config OPENTHREAD_PARENT_SEARCH_CHECK_INTERVAL |
| int "Interval to trigger parent search in seconds" |
| default 540 |
| depends on OPENTHREAD_PARENT_SEARCH |
| |
| config OPENTHREAD_PARENT_SEARCH_BACKOFF_INTERVAL |
| int "Backoff interval to prevent parent search retry in seconds" |
| default 36000 |
| depends on OPENTHREAD_PARENT_SEARCH |
| |
| config OPENTHREAD_PARENT_SEARCH_RSS_THRESHOLD |
| int "RSSI threshold to trigger parent search" |
| default -65 |
| depends on OPENTHREAD_PARENT_SEARCH |
| |
| config OPENTHREAD_CLI_MAX_LINE_LENGTH |
| int "The maximum size of the CLI line in bytes" |
| range 16 1024 |
| default 384 |
| |
| config OPENTHREAD_IP6_MAX_EXT_UCAST_ADDRS |
| int "The maximum number of supported IPv6 addresses allows to be externally added" |
| range 0 32 |
| default 4 |
| |
| config OPENTHREAD_IP6_MAX_EXT_MCAST_ADDRS |
| int "The maximum number of supported IPv6 multicast addresses allows to be externally added" |
| range 0 32 |
| default 2 |
| |
| config OPENTHREAD_TCP_ENABLE |
| bool "TCP" |
| |
| config OPENTHREAD_CLI_TCP_ENABLE |
| bool "TCP in the CLI tool" |
| default y if SHELL |
| depends on OPENTHREAD_TCP_ENABLE |
| |
| config OPENTHREAD_HISTORY_TRACKER |
| bool "History tracker support" |
| |
| config OPENTHREAD_MAC_STAY_AWAKE_BETWEEN_FRAGMENTS |
| bool "Stay awake between packet fragments" |
| help |
| This optimization is done at the expense of power consumption on SED/SSED devices. |
