| /* |
| * Copyright (c) 2019 Actinius |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| / { |
| model = "Actinius Icarus IoT Dev Board"; |
| compatible = "actinius,icarus", "nordic,nrf9160-sica", |
| "nordic,nrf9160"; |
| |
| chosen { |
| zephyr,console = &uart0; |
| zephyr,shell-uart = &uart0; |
| zephyr,uart-mcumgr = &uart0; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| |
| red_led: led_0 { |
| gpios = <&gpio0 10 GPIO_INT_ACTIVE_LOW>; |
| label = "Red LED"; |
| }; |
| |
| green_led: led_1 { |
| gpios = <&gpio0 11 GPIO_INT_ACTIVE_LOW>; |
| label = "Green LED"; |
| }; |
| |
| blue_led: led_2 { |
| gpios = <&gpio0 12 GPIO_INT_ACTIVE_LOW>; |
| label = "Blue LED"; |
| }; |
| }; |
| |
| buttons { |
| compatible = "gpio-keys"; |
| |
| button0: button_0 { |
| gpios = <&gpio0 5 (GPIO_PUD_PULL_UP | GPIO_INT_ACTIVE_LOW)>; |
| label = "Push Button 1"; |
| }; |
| }; |
| |
| aliases { |
| led0 = &red_led; |
| led1 = &green_led; |
| led2 = &blue_led; |
| rgb-pwm = &pwm0; |
| sw0 = &button0; |
| }; |
| }; |
| |
| &adc { |
| status ="okay"; |
| }; |
| |
| &gpiote { |
| status = "okay"; |
| }; |
| |
| &gpio0 { |
| status = "okay"; |
| }; |
| |
| &uart0 { |
| status = "okay"; |
| |
| current-speed = <115200>; |
| tx-pin = <9>; |
| rx-pin = <6>; |
| rts-pin = <7>; |
| cts-pin = <25>; |
| }; |
| |
| &uart1 { |
| status = "okay"; |
| |
| current-speed = <115200>; |
| tx-pin = <24>; |
| rx-pin = <23>; |
| }; |
| |
| &uart2 { |
| current-speed = <115200>; |
| tx-pin = <4>; |
| rx-pin = <5>; |
| }; |
| |
| &i2c2 { |
| compatible = "nordic,nrf-twim"; |
| status = "okay"; |
| |
| clock-frequency = <I2C_BITRATE_FAST>; |
| sda-pin = <26>; |
| scl-pin = <27>; |
| |
| lis2dh12-accel@19 { |
| compatible = "st,lis2dh"; |
| reg = <0x19>; |
| irq-gpios = <&gpio0 28 0>, <&gpio0 29 0>; |
| label = "LIS2DH12-ACCEL"; |
| }; |
| }; |
| |
| &spi3 { |
| compatible = "nordic,nrf-spim"; |
| status = "okay"; |
| |
| sck-pin = <20>; |
| mosi-pin = <21>; |
| miso-pin = <22>; |
| }; |
| |
| &pwm0 { |
| status = "okay"; |
| |
| ch0-pin = <10>; |
| ch0-inverted; |
| |
| ch1-pin = <11>; |
| ch1-inverted; |
| |
| ch2-pin = <12>; |
| ch2-inverted; |
| }; |
| |
| &pwm1 { |
| status = "okay"; |
| }; |
| |
| &pwm2 { |
| status = "okay"; |
| }; |
| |
| &pwm3 { |
| status = "okay"; |
| }; |
| |
| &timer0 { |
| status = "okay"; |
| }; |
| |
| &timer1 { |
| status = "okay"; |
| }; |
| |
| &timer2 { |
| status = "okay"; |
| }; |
| |
| &flash0 { |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| boot_partition: partition@0 { |
| label = "mcuboot"; |
| reg = <0x00000000 0x10000>; |
| }; |
| slot0_partition: partition@10000 { |
| label = "image-0"; |
| }; |
| slot0_ns_partition: partition@40000 { |
| label = "image-0-nonsecure"; |
| }; |
| slot1_partition: partition@80000 { |
| label = "image-1"; |
| }; |
| slot1_ns_partition: partition@b0000 { |
| label = "image-1-nonsecure"; |
| }; |
| scratch_partition: partition@f0000 { |
| label = "image-scratch"; |
| reg = <0x000f0000 0xa000>; |
| }; |
| storage_partition: partition@fa000 { |
| label = "storage"; |
| reg = <0x000fa000 0x00006000>; |
| }; |
| }; |
| }; |
| |
| / { |
| /* SRAM allocated and used by the BSD library */ |
| sram0_bsd: memory@20010000 { |
| compatible = "mmio-sram"; |
| }; |
| |
| /* SRAM allocated to the Non-Secure image */ |
| sram0_ns: memory@20020000 { |
| compatible = "mmio-sram"; |
| }; |
| }; |
| |
| /* Include partition configuration file */ |
| #include "actinius_icarus_partition_conf.dts" |