| # Kconfig - STM32 UART configuration |
| # |
| # Copyright (c) 2016 Open-RnD Sp. z o.o. |
| # |
| # SPDX-License-Identifier: Apache-2.0 |
| # |
| |
| menuconfig UART_STM32 |
| bool "STM32 MCU serial driver" |
| select SERIAL_HAS_DRIVER |
| select SERIAL_SUPPORT_INTERRUPT |
| depends on SOC_FAMILY_STM32 |
| help |
| This option enables the UART driver for STM32 family of |
| processors. |
| Say y if you wish to use serial port on STM32 MCU. |
| |
| if UART_STM32 |
| |
| # --- port 1 --- |
| |
| config UART_1 |
| bool "Enable STM32 USART1 Port" |
| help |
| Enable support for USART1 port in the driver. |
| Say y here if you want to use USART1 device. |
| |
| # --- port 2 --- |
| |
| config UART_2 |
| bool "Enable STM32 USART2 Port" |
| help |
| Enable support for USART2 port in the driver. |
| Say y here if you want to use USART2 device. |
| |
| # --- port 3 --- |
| |
| config UART_3 |
| bool "Enable STM32 USART3 Port" |
| help |
| Enable support for USART3 port in the driver. |
| Say y here if you want to use USART3 device. |
| |
| # --- port 4 --- |
| |
| config UART_4 |
| bool "Enable STM32 U(S)ART4 Port" |
| help |
| Enable support for U(S)ART4 port in the driver. |
| Say y here if you want to use U(S)ART4 device. |
| |
| # --- port 5 --- |
| |
| config UART_5 |
| bool "Enable STM32 U(S)ART5 Port" |
| help |
| Enable support for U(S)ART5 port in the driver. |
| Say y here if you want to use U(S)ART5 device. |
| |
| # --- port 6 --- |
| |
| config UART_6 |
| bool "Enable STM32 USART6 Port" |
| help |
| Enable support for USART6 port in the driver. |
| Say y here if you want to use USART6 device. |
| |
| # --- port 7 --- |
| |
| config UART_7 |
| bool "Enable STM32 U(S)ART7 Port" |
| help |
| Enable support for U(S)ART7 port in the driver. |
| Say y here if you want to use U(S)ART7 device. |
| |
| # --- port 8 --- |
| |
| config UART_8 |
| bool "Enable STM32 U(S)ART8 Port" |
| help |
| Enable support for U(S)ART8 port in the driver. |
| Say y here if you want to use U(S)ART8 device. |
| |
| # --- port 9 --- |
| |
| config UART_9 |
| bool "Enable STM32 UART9 Port" |
| help |
| Enable support for UART9 port in the driver. |
| Say y here if you want to use UART9 device. |
| |
| # --- port 10 --- |
| |
| config UART_10 |
| bool "Enable STM32 UART10 Port" |
| help |
| Enable support for UART10 port in the driver. |
| Say y here if you want to use UART10 device. |
| |
| if SOC_SERIES_STM32L0X || SOC_SERIES_STM32L4X || SOC_SERIES_STM32WBX || SOC_SERIES_STM32H7X || SOC_SERIES_STM32G4X |
| |
| # --- low power port 1 --- |
| |
| config LPUART_1 |
| bool "Enable STM32 LPUART1 Port" |
| help |
| Enable support for LPUART1 port in the driver. |
| Say y here if you want to use LPUART1 device. |
| |
| endif # SOC_SERIES_STM32L0X || SOC_SERIES_STM32L4X || SOC_SERIES_STM32WBX || SOC_SERIES_STM32G4X |
| |
| endif # UART_STM32 |
