| /* |
| * Copyright (c) 2022 Thomas Stranger |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| /** |
| * @brief 1-Wire network related functions. |
| * |
| * The following procedures wrap basic w1 syscalls, they should be callable |
| * from user mode as well as supervisor mode, therefore _ZEPHYR_SUPERVISOR__ |
| * is not defined for this file such that inline macros do not skip |
| * the arch_is_user_context() check. |
| */ |
| |
| #include <zephyr/logging/log.h> |
| #include <zephyr/drivers/w1.h> |
| |
| LOG_MODULE_REGISTER(w1, CONFIG_W1_LOG_LEVEL); |
| |
| #define W1_SEARCH_DISCREPANCY_INIT 0 |
| #define W1_SEARCH_LAST_SLAVE 65 |
| #define W1_SEARCH_NO_SLAVE 66 |
| |
| /* @brief Search bus for next slave. |
| * |
| * This function searches the next 1-Wire slave on the bus. |
| * It sets the found ROM and the last discrepancy in case more than one |
| * slave took part in the search. |
| * In case only one slave took part in the search, the discrepancy is set to |
| * W1_SEARCH_LAST_SLAVE, and in case no slave participated in the search, |
| * the discrepancy is set to W1_SEARCH_NO_SLAVE. |
| * |
| * The implementation is similar to suggested in the maxim application note 187. |
| * The master reads the first ROM bit and its complementary value of all slaves. |
| * Due to physical characteristics, the value received is a |
| * logical AND of all slaves' 1st bit. Slaves only continue to |
| * participate in the search procedure if the next bit the master sends matches |
| * their own addresses' bit. This allows the master to branch through 64-bit |
| * addresses in order to detect all slaves. |
| |
| * The 1st bit received is stored in bit 1 of rom_inv_64, the 2nd in bit 2 and so |
| * on, until bit 64. |
| * As a result, each byte of the ROM has the correct bit order, but the received |
| * bytes (big-endian) stored in rom_inv_64 are in inverse byte order. |
| * |
| * Note: Filtering by families is currently not supported. |
| * |
| * @param dev Pointer to the device structure for the w1 instance. |
| * @param command Command to chose between normal and alarm search. |
| * @param family This parameter is currently not supported. |
| * @param last_discrepancy This must be set to W1_SEARCH_DISCREPANCY_INIT before |
| * the first call, it carries the search progress for |
| * further calls. |
| * @param rom_inv_64 The found ROM: It must be set to zero before first |
| * call and carries the last found ROM for furter calls. |
| * The ROM is stored in inverse byte order. |
| * |
| * @retval 0 If successful. |
| * @retval -errno Negative error code in case of 1-wire read/write error. |
| */ |
| static int search_slave(const struct device *dev, uint8_t command, |
| uint8_t family, size_t *last_discrepancy, |
| uint64_t *rom_inv_64) |
| { |
| int ret; |
| size_t next_discrepancy; |
| bool last_id_bit; |
| bool last_complement_id_bit; |
| |
| ARG_UNUSED(family); |
| __ASSERT_NO_MSG(command == W1_CMD_SEARCH_ROM || |
| command == W1_CMD_SEARCH_ALARM); |
| |
| ret = w1_reset_bus(dev); |
| if (ret < 0) { |
| return ret; |
| } |
| if (ret == 0) { |
| *last_discrepancy = W1_SEARCH_NO_SLAVE; |
| return 0; |
| } |
| |
| ret = w1_write_byte(dev, command); |
| if (ret < 0) { |
| return ret; |
| } |
| next_discrepancy = W1_SEARCH_LAST_SLAVE; |
| |
| for (size_t id_bit_nr = 1; id_bit_nr < W1_SEARCH_LAST_SLAVE; id_bit_nr++) { |
| ret = w1_read_bit(dev); |
| if (ret < 0) { |
| return ret; |
| } |
| last_id_bit = (bool)ret; |
| ret = w1_read_bit(dev); |
| if (ret < 0) { |
| return ret; |
| } |
| last_complement_id_bit = (bool)ret; |
| |
| if (last_id_bit && last_complement_id_bit) { |
| /* |
| * No slave participating: |
| * We can stop following the branch. |
| */ |
| LOG_DBG("No slave paricipating"); |
| *last_discrepancy = W1_SEARCH_NO_SLAVE; |
| return 0; |
| } else if (last_id_bit != last_complement_id_bit) { |
| /* |
| * All slaves connected have same ROM bit value: |
| * We can directly follow last_id_bit branch. |
| */ |
| } else { |
| /* |
| * Discrepancy detected: bit value at id_bit_nr does |
| * not match for all slaves on the bus. |
| */ |
| if ((id_bit_nr > *last_discrepancy) || |
| ((id_bit_nr < *last_discrepancy) && |
| (*rom_inv_64 & BIT64(id_bit_nr - 1)))) { |
| /* |
| * - id_bit_nr > last_discrepancy: |
| * Start always w/ branch of 1s |
| * - id_bit_nr < last_discrepancy: |
| * Follow same branch as before |
| */ |
| last_id_bit = true; |
| next_discrepancy = id_bit_nr; |
| } else { |
| /* |
| * - id_bit_nr == last_discrepancy: |
| * 1-path already done, therefore go 0 path |
| * - id_bit_nr < last_discrepancy: |
| * Follow same branch as before |
| */ |
| } |
| } |
| |
| /* |
| * Send and store the chosen bit: all not matching slaves will |
| * no longer participate in this search until they are reset. |
| */ |
| ret = w1_write_bit(dev, last_id_bit); |
| if (ret < 0) { |
| return ret; |
| } |
| *rom_inv_64 &= ~BIT64(id_bit_nr - 1); |
| *rom_inv_64 |= last_id_bit ? BIT64(id_bit_nr - 1) : 0; |
| } |
| |
| *last_discrepancy = next_discrepancy; |
| return 0; |
| } |
| |
| int z_impl_w1_search_bus(const struct device *dev, uint8_t command, |
| uint8_t family, w1_search_callback_t callback, |
| void *user_data) |
| { |
| size_t last_discrepancy = W1_SEARCH_DISCREPANCY_INIT; |
| uint64_t found_rom_inv_64 = 0; |
| struct w1_rom found_rom = { 0 }; |
| int found_cnt = 0; |
| int ret; |
| |
| (void)w1_lock_bus(dev); |
| |
| do { |
| ret = search_slave(dev, command, family, &last_discrepancy, |
| &found_rom_inv_64); |
| if (ret < 0) { |
| found_cnt = ret; |
| break; |
| } |
| if (last_discrepancy == W1_SEARCH_NO_SLAVE) { |
| break; |
| } |
| |
| found_cnt++; |
| /* |
| * ROM is stored in found_rom_inv_64 in "inverse byte order" => |
| * Only big-endian targets need to swap, such that struct's |
| * bytes are stored in big-endian byte order. |
| */ |
| if (IS_ENABLED(CONFIG_BIG_ENDIAN)) { |
| sys_memcpy_swap(&found_rom, &found_rom_inv_64, 8); |
| } else { |
| *(uint64_t *)&found_rom = found_rom_inv_64; |
| } |
| LOG_DBG("ROM found: nr %u, %016llx", found_cnt, |
| w1_rom_to_uint64(&found_rom)); |
| |
| if (callback != NULL) { |
| callback(found_rom, user_data); |
| } |
| |
| } while (last_discrepancy != W1_SEARCH_LAST_SLAVE); |
| |
| (void)w1_unlock_bus(dev); |
| return found_cnt; |
| } |
| |
| int w1_read_rom(const struct device *dev, struct w1_rom *rom) |
| { |
| int ret; |
| |
| (void)w1_lock_bus(dev); |
| ret = w1_reset_bus(dev); |
| if (ret == 0) { |
| ret = -ENODEV; |
| goto out; |
| } |
| if (ret < 0) { |
| goto out; |
| } |
| |
| ret = w1_write_byte(dev, W1_CMD_READ_ROM); |
| if (ret < 0) { |
| goto out; |
| } |
| ret = w1_read_block(dev, (uint8_t *)rom, sizeof(struct w1_rom)); |
| if (ret < 0) { |
| goto out; |
| } |
| if (w1_crc8((uint8_t *)rom, sizeof(struct w1_rom)) != 0) { |
| ret = -EIO; |
| } |
| |
| out: |
| (void)w1_unlock_bus(dev); |
| return ret; |
| }; |
| |
| static int match_rom(const struct device *dev, const struct w1_slave_config *config) |
| { |
| int ret; |
| uint8_t cmd; |
| |
| if (!config->overdrive) { |
| if (w1_configure(dev, W1_SETTING_SPEED, 0) < 0) { |
| return -EIO; |
| } |
| } |
| |
| ret = w1_reset_bus(dev); |
| if (ret == 0) { |
| return -ENODEV; |
| } |
| if (ret < 0) { |
| return ret; |
| } |
| |
| cmd = config->overdrive ? W1_CMD_OVERDRIVE_MATCH_ROM : W1_CMD_MATCH_ROM; |
| ret = w1_write_byte(dev, cmd); |
| if (ret < 0) { |
| return ret; |
| } |
| ret = w1_write_block(dev, (uint8_t *)&config->rom, 8); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| if (config->overdrive) { |
| if (w1_configure(dev, W1_SETTING_SPEED, 1) < 0) { |
| return -EIO; |
| } |
| } |
| |
| return 0; |
| }; |
| |
| int w1_match_rom(const struct device *dev, const struct w1_slave_config *config) |
| { |
| int ret; |
| |
| (void)w1_lock_bus(dev); |
| ret = match_rom(dev, config); |
| (void)w1_unlock_bus(dev); |
| return ret; |
| } |
| |
| int w1_resume_command(const struct device *dev) |
| { |
| int ret; |
| |
| (void)w1_lock_bus(dev); |
| ret = w1_reset_bus(dev); |
| if (ret == 0) { |
| ret = -ENODEV; |
| goto out; |
| } |
| if (ret < 0) { |
| goto out; |
| } |
| |
| ret = w1_write_byte(dev, W1_CMD_RESUME); |
| out: |
| (void)w1_unlock_bus(dev); |
| return ret; |
| } |
| |
| static int skip_rom(const struct device *dev, const struct w1_slave_config *config) |
| { |
| int ret; |
| uint8_t cmd; |
| |
| if (!config->overdrive) { |
| if (w1_configure(dev, W1_SETTING_SPEED, 0) < 0) { |
| return -EIO; |
| } |
| } |
| |
| ret = w1_reset_bus(dev); |
| if (ret == 0) { |
| return -ENODEV; |
| } |
| if (ret < 0) { |
| return ret; |
| } |
| |
| cmd = config->overdrive ? W1_CMD_OVERDRIVE_SKIP_ROM : W1_CMD_SKIP_ROM; |
| ret = w1_write_byte(dev, cmd); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| if (config->overdrive) { |
| if (w1_configure(dev, W1_SETTING_SPEED, 1) < 0) { |
| return -EIO; |
| } |
| } |
| |
| return 0; |
| } |
| |
| int w1_skip_rom(const struct device *dev, const struct w1_slave_config *config) |
| { |
| int ret; |
| |
| (void)w1_lock_bus(dev); |
| ret = skip_rom(dev, config); |
| (void)w1_unlock_bus(dev); |
| return ret; |
| } |
| |
| static int reset_select(const struct device *dev, const struct w1_slave_config *config) |
| { |
| if (IS_ENABLED(CONFIG_W1_NET_FORCE_MULTIDROP_ADDRESSING) || w1_get_slave_count(dev) > 1) { |
| return match_rom(dev, config); |
| } |
| |
| return skip_rom(dev, config); |
| } |
| |
| int w1_reset_select(const struct device *dev, const struct w1_slave_config *config) |
| { |
| int ret; |
| |
| (void)w1_lock_bus(dev); |
| ret = reset_select(dev, config); |
| (void)w1_unlock_bus(dev); |
| return ret; |
| } |
| |
| static int write_read(const struct device *dev, const struct w1_slave_config *config, |
| const uint8_t *write_buf, size_t write_len, |
| uint8_t *read_buf, size_t read_len) |
| { |
| int ret; |
| |
| ret = reset_select(dev, config); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| ret = w1_write_block(dev, write_buf, write_len); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| if (read_buf == NULL && read_len > 0) { |
| return -EIO; |
| } |
| return w1_read_block(dev, read_buf, read_len); |
| }; |
| |
| int w1_write_read(const struct device *dev, const struct w1_slave_config *config, |
| const uint8_t *write_buf, size_t write_len, |
| uint8_t *read_buf, size_t read_len) |
| { |
| int ret; |
| |
| (void)w1_lock_bus(dev); |
| ret = write_read(dev, config, write_buf, write_len, read_buf, read_len); |
| (void)w1_unlock_bus(dev); |
| return ret; |
| }; |