dts/bindings/clock/st,stm32f4-pll-clock.yaml

# Copyright (c) 2021, Linaro ltd
# SPDX-License-Identifier: Apache-2.0

description: |
  STM32F4 Main PLL node binding:

  Takes one of clk_hse or clk_hsi as input clock, with an
  input frequency from 1 to 2 MHz. PLLM factor is used to set the input clock
  in this acceptable range.

  Up to 2 output clocks could be supported and for each output clock, the
  frequency can be computed with the following formula:

    f(PLL_P) = f(VCO clock) / PLLP  --> PLLCLK (System Clock)
    f(PLL_Q) = f(VCO clock) / PLLQ  --> PLL48CLK (Optional)

      with f(VCO clock) = f(PLL clock input) × (PLLN / PLLM)

  The PLL output frequency must not exceed 80 MHz.


compatible: "st,stm32f4-pll-clock"

include: [clock-controller.yaml, base.yaml]

properties:
  "#clock-cells":
    const: 0

  clocks:
    required: true

  div-m:
    type: int
    required: true
    description: |
        Division factor for the PLL input clock
        Valid range: 2 - 63

  mul-n:
    type: int
    required: true
    description: |
        Main PLL multiplication factor for VCO
        Valid range: 50 - 432

  div-p:
    type: int
    required: true
    description: |
        Main PLL division factor for PLLSAI2CLK
    enum:
      - 2
      - 4
      - 6
      - 8

  div-q:
    type: int
    description: |
        Main PLL (PLL) division factor for USB OTG FS, SDMMC and random number
        generator clocks.
        Valid range: 2 - 15