| /* |
| * Copyright (c) 2017 Nordic Semiconductor ASA |
| * Copyright (c) 2018 Intel Corporation |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <zephyr/kernel.h> |
| #include <zephyr/devicetree.h> |
| |
| #include <zephyr/shell/shell.h> |
| #include <zephyr/sys/util.h> |
| |
| #include <stdlib.h> |
| #include <string.h> |
| #include <zephyr/drivers/flash.h> |
| |
| /* Buffer is only needed for bytes that follow command and offset */ |
| #define BUF_ARRAY_CNT (CONFIG_SHELL_ARGC_MAX - 2) |
| #define TEST_ARR_SIZE 0x1000 |
| |
| /* This only issues compilation error when it would not be possible |
| * to extract at least one byte from command line arguments, yet |
| * it does not warrant successful writes if BUF_ARRAY_CNT |
| * is smaller than flash write alignment. |
| */ |
| BUILD_ASSERT(BUF_ARRAY_CNT >= 1); |
| |
| static const struct device *const zephyr_flash_controller = |
| DEVICE_DT_GET_OR_NULL(DT_CHOSEN(zephyr_flash_controller)); |
| |
| static uint8_t __aligned(4) test_arr[TEST_ARR_SIZE]; |
| |
| static int parse_helper(const struct shell *shell, size_t *argc, |
| char **argv[], const struct device * *flash_dev, |
| uint32_t *addr) |
| { |
| char *endptr; |
| |
| *addr = strtoul((*argv)[1], &endptr, 16); |
| |
| if (*endptr != '\0') { |
| /* flash controller from user input */ |
| *flash_dev = device_get_binding((*argv)[1]); |
| if (!*flash_dev) { |
| shell_error(shell, "Given flash device was not found"); |
| return -ENODEV; |
| } |
| } else if (zephyr_flash_controller != NULL) { |
| /* default to zephyr,flash-controller */ |
| if (!device_is_ready(zephyr_flash_controller)) { |
| shell_error(shell, "Default flash driver not ready"); |
| return -ENODEV; |
| } |
| *flash_dev = zephyr_flash_controller; |
| } else { |
| /* no flash controller given, no default available */ |
| shell_error(shell, "No flash device specified (required)"); |
| return -ENODEV; |
| } |
| |
| if (*endptr == '\0') { |
| return 0; |
| } |
| if (*argc < 3) { |
| shell_error(shell, "Missing address."); |
| return -EINVAL; |
| } |
| *addr = strtoul((*argv)[2], &endptr, 16); |
| (*argc)--; |
| (*argv)++; |
| return 0; |
| } |
| |
| static int cmd_erase(const struct shell *shell, size_t argc, char *argv[]) |
| { |
| const struct device *flash_dev; |
| uint32_t page_addr; |
| int result; |
| uint32_t size; |
| |
| result = parse_helper(shell, &argc, &argv, &flash_dev, &page_addr); |
| if (result) { |
| return result; |
| } |
| if (argc > 2) { |
| size = strtoul(argv[2], NULL, 16); |
| } else { |
| struct flash_pages_info info; |
| |
| result = flash_get_page_info_by_offs(flash_dev, page_addr, |
| &info); |
| |
| if (result != 0) { |
| shell_error(shell, "Could not determine page size, " |
| "code %d.", result); |
| return -EINVAL; |
| } |
| |
| size = info.size; |
| } |
| |
| result = flash_erase(flash_dev, page_addr, size); |
| |
| if (result) { |
| shell_error(shell, "Erase Failed, code %d.", result); |
| } else { |
| shell_print(shell, "Erase success."); |
| } |
| |
| return result; |
| } |
| |
| static int cmd_write(const struct shell *shell, size_t argc, char *argv[]) |
| { |
| uint32_t __aligned(4) check_array[BUF_ARRAY_CNT]; |
| uint32_t __aligned(4) buf_array[BUF_ARRAY_CNT]; |
| const struct device *flash_dev; |
| uint32_t w_addr; |
| int ret; |
| size_t op_size; |
| |
| ret = parse_helper(shell, &argc, &argv, &flash_dev, &w_addr); |
| if (ret) { |
| return ret; |
| } |
| |
| if (argc <= 2) { |
| shell_error(shell, "Missing data to be written."); |
| return -EINVAL; |
| } |
| |
| op_size = 0; |
| |
| for (int i = 2; i < argc; i++) { |
| int j = i - 2; |
| |
| buf_array[j] = strtoul(argv[i], NULL, 16); |
| check_array[j] = ~buf_array[j]; |
| |
| op_size += sizeof(buf_array[0]); |
| } |
| |
| if (flash_write(flash_dev, w_addr, buf_array, op_size) != 0) { |
| shell_error(shell, "Write internal ERROR!"); |
| return -EIO; |
| } |
| |
| shell_print(shell, "Write OK."); |
| |
| if (flash_read(flash_dev, w_addr, check_array, op_size) < 0) { |
| shell_print(shell, "Verification read ERROR!"); |
| return -EIO; |
| } |
| |
| if (memcmp(buf_array, check_array, op_size) == 0) { |
| shell_print(shell, "Verified."); |
| } else { |
| shell_error(shell, "Verification ERROR!"); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int cmd_read(const struct shell *shell, size_t argc, char *argv[]) |
| { |
| const struct device *flash_dev; |
| uint32_t addr; |
| int todo; |
| int upto; |
| int cnt; |
| int ret; |
| |
| ret = parse_helper(shell, &argc, &argv, &flash_dev, &addr); |
| if (ret) { |
| return ret; |
| } |
| |
| if (argc > 2) { |
| cnt = strtoul(argv[2], NULL, 16); |
| } else { |
| cnt = 1; |
| } |
| |
| for (upto = 0; upto < cnt; upto += todo) { |
| uint8_t data[SHELL_HEXDUMP_BYTES_IN_LINE]; |
| |
| todo = MIN(cnt - upto, SHELL_HEXDUMP_BYTES_IN_LINE); |
| ret = flash_read(flash_dev, addr, data, todo); |
| if (ret != 0) { |
| shell_error(shell, "Read ERROR!"); |
| return -EIO; |
| } |
| shell_hexdump_line(shell, addr, data, todo); |
| addr += todo; |
| } |
| |
| shell_print(shell, ""); |
| |
| return 0; |
| } |
| |
| static int cmd_test(const struct shell *shell, size_t argc, char *argv[]) |
| { |
| const struct device *flash_dev; |
| uint32_t repeat; |
| int result; |
| uint32_t addr; |
| uint32_t size; |
| |
| result = parse_helper(shell, &argc, &argv, &flash_dev, &addr); |
| if (result) { |
| return result; |
| } |
| |
| size = strtoul(argv[2], NULL, 16); |
| repeat = strtoul(argv[3], NULL, 16); |
| if (size > TEST_ARR_SIZE) { |
| shell_error(shell, "<size> must be at most 0x%x.", |
| TEST_ARR_SIZE); |
| return -EINVAL; |
| } |
| |
| for (uint32_t i = 0; i < size; i++) { |
| test_arr[i] = (uint8_t)i; |
| } |
| |
| result = 0; |
| |
| while (repeat--) { |
| result = flash_erase(flash_dev, addr, size); |
| |
| if (result) { |
| shell_error(shell, "Erase Failed, code %d.", result); |
| break; |
| } |
| |
| shell_print(shell, "Erase OK."); |
| |
| result = flash_write(flash_dev, addr, test_arr, size); |
| |
| if (result) { |
| shell_error(shell, "Write internal ERROR!"); |
| break; |
| } |
| |
| shell_print(shell, "Write OK."); |
| } |
| |
| if (result == 0) { |
| shell_print(shell, "Erase-Write test done."); |
| } |
| |
| return result; |
| } |
| |
| static int set_bypass(const struct shell *sh, shell_bypass_cb_t bypass) |
| { |
| static bool in_use; |
| |
| if (bypass && in_use) { |
| shell_error(sh, "flash load supports setting bypass on a single instance."); |
| |
| return -EBUSY; |
| } |
| |
| /* Mark that we have set or unset the bypass function */ |
| in_use = bypass != NULL; |
| |
| if (in_use) { |
| shell_print(sh, "Loading..."); |
| } |
| |
| shell_set_bypass(sh, bypass); |
| |
| return 0; |
| } |
| |
| #define FLASH_LOAD_BUF_MAX 256 |
| |
| static const struct device *flash_load_dev; |
| static uint32_t flash_load_buf_size; |
| static uint32_t flash_load_addr; |
| static uint32_t flash_load_total; |
| static uint32_t flash_load_written; |
| static uint32_t flash_load_chunk; |
| |
| static uint32_t flash_load_boff; |
| static uint8_t flash_load_buf[FLASH_LOAD_BUF_MAX]; |
| |
| static void bypass_cb(const struct shell *sh, uint8_t *recv, size_t len) |
| { |
| uint32_t left_to_read = flash_load_total - flash_load_written - flash_load_boff; |
| uint32_t to_copy = MIN(len, left_to_read); |
| uint32_t copied = 0; |
| |
| while (copied < to_copy) { |
| |
| uint32_t buf_copy = MIN(to_copy, flash_load_buf_size - flash_load_boff); |
| |
| memcpy(flash_load_buf + flash_load_boff, recv + copied, buf_copy); |
| |
| flash_load_boff += buf_copy; |
| copied += buf_copy; |
| |
| /* Buffer is full. Write data to memory. */ |
| if (flash_load_boff == flash_load_buf_size) { |
| uint32_t addr = flash_load_addr + flash_load_written; |
| int rc = flash_write(flash_load_dev, addr, flash_load_buf, |
| flash_load_buf_size); |
| |
| if (rc != 0) { |
| shell_error(sh, "Write to addr %x on dev %p ERROR!", |
| addr, flash_load_dev); |
| } |
| |
| shell_print(sh, "Written chunk %d", flash_load_chunk); |
| |
| flash_load_written += flash_load_buf_size; |
| flash_load_chunk++; |
| flash_load_boff = 0; |
| } |
| } |
| |
| /* When data is not aligned to flash_load_buf_size there may be partial write |
| * at the end. |
| */ |
| if (flash_load_written < flash_load_total && |
| flash_load_written + flash_load_boff >= flash_load_total) { |
| |
| uint32_t addr = flash_load_addr + flash_load_written; |
| int rc = flash_write(flash_load_dev, addr, flash_load_buf, flash_load_boff); |
| |
| if (rc != 0) { |
| set_bypass(sh, NULL); |
| shell_error(sh, "Write to addr %x on dev %p ERROR!", |
| addr, flash_load_dev); |
| return; |
| } |
| |
| shell_print(sh, "Written chunk %d", flash_load_chunk); |
| flash_load_written += flash_load_boff; |
| flash_load_chunk++; |
| } |
| |
| if (flash_load_written >= flash_load_total) { |
| set_bypass(sh, NULL); |
| shell_print(sh, "Read all"); |
| } |
| } |
| |
| static int cmd_load(const struct shell *sh, size_t argc, char *argv[]) |
| { |
| const struct device *flash_dev; |
| int result; |
| uint32_t addr; |
| uint32_t size; |
| ssize_t write_block_size; |
| |
| result = parse_helper(sh, &argc, &argv, &flash_dev, &addr); |
| if (result) { |
| return result; |
| } |
| |
| size = strtoul(argv[2], NULL, 0); |
| |
| write_block_size = flash_get_write_block_size(flash_dev); |
| |
| /* Check if size is aligned */ |
| if (size % write_block_size != 0) { |
| shell_error(sh, "Size must be %zu bytes aligned", write_block_size); |
| return -EIO; |
| } |
| |
| /* Align buffer size to write_block_size */ |
| flash_load_buf_size = FLASH_LOAD_BUF_MAX; |
| |
| if (flash_load_buf_size < write_block_size) { |
| shell_error(sh, "Size of buffer is too small to be aligned to %zu.", |
| write_block_size); |
| return -ENOSPC; |
| } |
| |
| /* If buffer size is not aligned then change its size. */ |
| if (flash_load_buf_size % write_block_size != 0) { |
| flash_load_buf_size -= flash_load_buf_size % write_block_size; |
| |
| shell_warn(sh, "Load buffer was not aligned to %zu.", write_block_size); |
| shell_warn(sh, "Effective load buffer size was set from %d to %d", |
| FLASH_LOAD_BUF_MAX, flash_load_buf_size); |
| } |
| |
| /* Prepare data for callback. */ |
| flash_load_dev = flash_dev; |
| flash_load_addr = addr; |
| flash_load_total = size; |
| flash_load_written = 0; |
| flash_load_boff = 0; |
| flash_load_chunk = 0; |
| |
| shell_print(sh, "Loading %d bytes starting at address %x", size, addr); |
| |
| set_bypass(sh, bypass_cb); |
| return 0; |
| } |
| |
| static int cmd_page_info(const struct shell *sh, size_t argc, char *argv[]) |
| { |
| const struct device *flash_dev; |
| struct flash_pages_info info; |
| int result; |
| uint32_t addr; |
| |
| result = parse_helper(sh, &argc, &argv, &flash_dev, &addr); |
| if (result) { |
| return result; |
| } |
| |
| result = flash_get_page_info_by_offs(flash_dev, addr, &info); |
| |
| if (result != 0) { |
| shell_error(sh, "Could not determine page size, error code %d.", result); |
| return -EINVAL; |
| } |
| |
| shell_print(sh, "Page for address 0x%x:\nstart offset: 0x%lx\nsize: %zu\nindex: %d", |
| addr, info.start_offset, info.size, info.index); |
| return 0; |
| } |
| |
| static void device_name_get(size_t idx, struct shell_static_entry *entry); |
| |
| SHELL_DYNAMIC_CMD_CREATE(dsub_device_name, device_name_get); |
| |
| static void device_name_get(size_t idx, struct shell_static_entry *entry) |
| { |
| const struct device *dev = shell_device_lookup(idx, NULL); |
| |
| entry->syntax = (dev != NULL) ? dev->name : NULL; |
| entry->handler = NULL; |
| entry->help = NULL; |
| entry->subcmd = &dsub_device_name; |
| } |
| |
| SHELL_STATIC_SUBCMD_SET_CREATE(flash_cmds, |
| SHELL_CMD_ARG(erase, &dsub_device_name, |
| "[<device>] <page address> [<size>]", |
| cmd_erase, 2, 2), |
| SHELL_CMD_ARG(read, &dsub_device_name, |
| "[<device>] <address> [<Dword count>]", |
| cmd_read, 2, 2), |
| SHELL_CMD_ARG(test, &dsub_device_name, |
| "[<device>] <address> <size> <repeat count>", |
| cmd_test, 4, 1), |
| SHELL_CMD_ARG(write, &dsub_device_name, |
| "[<device>] <address> <dword> [<dword>...]", |
| cmd_write, 3, BUF_ARRAY_CNT), |
| SHELL_CMD_ARG(load, &dsub_device_name, |
| "[<device>] <address> <size>", |
| cmd_load, 3, 1), |
| SHELL_CMD_ARG(page_info, &dsub_device_name, |
| "[<device>] <address>", |
| cmd_page_info, 2, 1), |
| SHELL_SUBCMD_SET_END |
| ); |
| |
| static int cmd_flash(const struct shell *shell, size_t argc, char **argv) |
| { |
| shell_error(shell, "%s:unknown parameter: %s", argv[0], argv[1]); |
| return -EINVAL; |
| } |
| |
| SHELL_CMD_ARG_REGISTER(flash, &flash_cmds, "Flash shell commands", |
| cmd_flash, 2, 0); |