| /* |
| * Copyright (c) 2018, NXP |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #define DT_DRV_COMPAT nxp_imx_mu |
| |
| #include <errno.h> |
| #include <string.h> |
| #include <zephyr/device.h> |
| #include <soc.h> |
| #include <zephyr/drivers/ipm.h> |
| #include <zephyr/irq.h> |
| #if IS_ENABLED(CONFIG_IPM_IMX_REV2) |
| #include "fsl_mu.h" |
| #else |
| #include <mu_imx.h> |
| #endif |
| |
| #define MU(config) ((MU_Type *)config->base) |
| |
| #if ((CONFIG_IPM_IMX_MAX_DATA_SIZE % 4) != 0) |
| #error CONFIG_IPM_IMX_MAX_DATA_SIZE is invalid |
| #endif |
| |
| #define IMX_IPM_DATA_REGS (CONFIG_IPM_IMX_MAX_DATA_SIZE / 4) |
| |
| struct imx_mu_config { |
| MU_Type *base; |
| void (*irq_config_func)(const struct device *dev); |
| }; |
| |
| struct imx_mu_data { |
| ipm_callback_t callback; |
| void *user_data; |
| }; |
| |
| #if IS_ENABLED(CONFIG_IPM_IMX_REV2) |
| /*! |
| * @brief Check RX full status. |
| * |
| * This function checks the specific receive register full status. |
| * |
| * @param base Register base address for the module. |
| * @param index RX register index to check. |
| * @retval true RX register is full. |
| * @retval false RX register is not full. |
| */ |
| static inline bool MU_IsRxFull(MU_Type *base, uint32_t index) |
| { |
| switch (index) { |
| case 0: |
| return (bool)(MU_GetStatusFlags(base) & kMU_Rx0FullFlag); |
| case 1: |
| return (bool)(MU_GetStatusFlags(base) & kMU_Rx1FullFlag); |
| case 2: |
| return (bool)(MU_GetStatusFlags(base) & kMU_Rx2FullFlag); |
| case 3: |
| return (bool)(MU_GetStatusFlags(base) & kMU_Rx3FullFlag); |
| default: |
| /* This shouldn't happen */ |
| assert(false); |
| return false; |
| } |
| } |
| |
| /*! |
| * @brief Check TX empty status. |
| * |
| * This function checks the specific transmit register empty status. |
| * |
| * @param base Register base address for the module. |
| * @param index TX register index to check. |
| * @retval true TX register is empty. |
| * @retval false TX register is not empty. |
| */ |
| static inline bool MU_IsTxEmpty(MU_Type *base, uint32_t index) |
| { |
| switch (index) { |
| case 0: |
| return (bool)(MU_GetStatusFlags(base) & kMU_Tx0EmptyFlag); |
| case 1: |
| return (bool)(MU_GetStatusFlags(base) & kMU_Tx1EmptyFlag); |
| case 2: |
| return (bool)(MU_GetStatusFlags(base) & kMU_Tx2EmptyFlag); |
| case 3: |
| return (bool)(MU_GetStatusFlags(base) & kMU_Tx3EmptyFlag); |
| default: |
| /* This shouldn't happen */ |
| assert(false); |
| return false; |
| } |
| } |
| #endif |
| |
| static void imx_mu_isr(const struct device *dev) |
| { |
| const struct imx_mu_config *config = dev->config; |
| MU_Type *base = MU(config); |
| struct imx_mu_data *data = dev->data; |
| uint32_t data32[IMX_IPM_DATA_REGS]; |
| uint32_t status_reg; |
| int32_t id; |
| int32_t i; |
| bool all_registers_full; |
| |
| status_reg = base->SR >>= MU_SR_RFn_SHIFT; |
| |
| for (id = CONFIG_IPM_IMX_MAX_ID_VAL; id >= 0; id--) { |
| if (status_reg & 0x1U) { |
| /* |
| * Check if all receive registers are full. If not, |
| * it is violation of the protocol (status register |
| * are set earlier than all receive registers). |
| * Do not read any of the registers in such situation. |
| */ |
| all_registers_full = true; |
| for (i = 0; i < IMX_IPM_DATA_REGS; i++) { |
| if (!MU_IsRxFull(base, |
| (id * IMX_IPM_DATA_REGS) + i)) { |
| all_registers_full = false; |
| break; |
| } |
| } |
| if (all_registers_full) { |
| for (i = 0; i < IMX_IPM_DATA_REGS; i++) { |
| #if IS_ENABLED(CONFIG_IPM_IMX_REV2) |
| data32[i] = MU_ReceiveMsg(base, |
| (id * IMX_IPM_DATA_REGS) + i); |
| #else |
| MU_ReceiveMsg(base, |
| (id * IMX_IPM_DATA_REGS) + i, |
| &data32[i]); |
| #endif |
| } |
| |
| if (data->callback) { |
| data->callback(dev, data->user_data, |
| (uint32_t)id, |
| &data32[0]); |
| } |
| } |
| } |
| status_reg >>= IMX_IPM_DATA_REGS; |
| } |
| |
| /* Add for ARM errata 838869, affects Cortex-M4, Cortex-M4F |
| * Store immediate overlapping exception return operation |
| * might vector to incorrect interrupt. For Cortex-M7, if |
| * core speed much faster than peripheral register write |
| * speed, the peripheral interrupt flags may be still set |
| * after exiting ISR, this results to the same error similar |
| * with errata 838869. |
| */ |
| #if (defined __CORTEX_M) && ((__CORTEX_M == 4U) || (__CORTEX_M == 7U)) |
| __DSB(); |
| #endif |
| } |
| |
| static int imx_mu_ipm_send(const struct device *dev, int wait, uint32_t id, |
| const void *data, int size) |
| { |
| const struct imx_mu_config *config = dev->config; |
| MU_Type *base = MU(config); |
| uint32_t data32[IMX_IPM_DATA_REGS]; |
| #if !IS_ENABLED(CONFIG_IPM_IMX_REV2) |
| mu_status_t status; |
| #endif |
| int i; |
| |
| if (id > CONFIG_IPM_IMX_MAX_ID_VAL) { |
| return -EINVAL; |
| } |
| |
| if (size > CONFIG_IPM_IMX_MAX_DATA_SIZE) { |
| return -EMSGSIZE; |
| } |
| |
| /* Actual message is passing using 32 bits registers */ |
| memcpy(data32, data, size); |
| |
| #if IS_ENABLED(CONFIG_IPM_IMX_REV2) |
| if (wait) { |
| for (i = 0; i < IMX_IPM_DATA_REGS; i++) { |
| MU_SendMsgNonBlocking(base, id * IMX_IPM_DATA_REGS + i, |
| data32[i]); |
| } |
| while (!MU_IsTxEmpty(base, |
| (id * IMX_IPM_DATA_REGS) + IMX_IPM_DATA_REGS - 1)) { |
| } |
| } else { |
| for (i = 0; i < IMX_IPM_DATA_REGS; i++) { |
| if (MU_IsTxEmpty(base, id * IMX_IPM_DATA_REGS + i)) { |
| MU_SendMsg(base, id * IMX_IPM_DATA_REGS + i, |
| data32[i]); |
| } else { |
| return -EBUSY; |
| } |
| } |
| } |
| |
| #else |
| for (i = 0; i < IMX_IPM_DATA_REGS; i++) { |
| status = MU_TrySendMsg(base, id * IMX_IPM_DATA_REGS + i, |
| data32[i]); |
| if (status == kStatus_MU_TxNotEmpty) { |
| return -EBUSY; |
| } |
| } |
| |
| if (wait) { |
| while (!MU_IsTxEmpty(base, |
| (id * IMX_IPM_DATA_REGS) + IMX_IPM_DATA_REGS - 1)) { |
| } |
| } |
| #endif |
| |
| return 0; |
| } |
| |
| static int imx_mu_ipm_max_data_size_get(const struct device *dev) |
| { |
| ARG_UNUSED(dev); |
| |
| return CONFIG_IPM_IMX_MAX_DATA_SIZE; |
| } |
| |
| static uint32_t imx_mu_ipm_max_id_val_get(const struct device *dev) |
| { |
| ARG_UNUSED(dev); |
| |
| return CONFIG_IPM_IMX_MAX_ID_VAL; |
| } |
| |
| static void imx_mu_ipm_register_callback(const struct device *dev, |
| ipm_callback_t cb, |
| void *user_data) |
| { |
| struct imx_mu_data *driver_data = dev->data; |
| |
| driver_data->callback = cb; |
| driver_data->user_data = user_data; |
| } |
| |
| static int imx_mu_ipm_set_enabled(const struct device *dev, int enable) |
| { |
| const struct imx_mu_config *config = dev->config; |
| MU_Type *base = MU(config); |
| #if IS_ENABLED(CONFIG_IPM_IMX_REV2) |
| #if CONFIG_IPM_IMX_MAX_DATA_SIZE_4 |
| if (enable) { |
| MU_EnableInterrupts(base, kMU_Rx0FullInterruptEnable); |
| MU_EnableInterrupts(base, kMU_Rx1FullInterruptEnable); |
| MU_EnableInterrupts(base, kMU_Rx2FullInterruptEnable); |
| MU_EnableInterrupts(base, kMU_Rx3FullInterruptEnable); |
| } else { |
| MU_DisableInterrupts(base, kMU_Rx0FullInterruptEnable); |
| MU_DisableInterrupts(base, kMU_Rx1FullInterruptEnable); |
| MU_DisableInterrupts(base, kMU_Rx2FullInterruptEnable); |
| MU_DisableInterrupts(base, kMU_Rx3FullInterruptEnable); |
| } |
| #elif CONFIG_IPM_IMX_MAX_DATA_SIZE_8 |
| if (enable) { |
| MU_EnableInterrupts(base, kMU_Rx1FullInterruptEnable); |
| MU_EnableInterrupts(base, kMU_Rx3FullInterruptEnable); |
| } else { |
| MU_DisableInterrupts(base, kMU_Rx1FullInterruptEnable); |
| MU_DisableInterrupts(base, kMU_Rx3FullInterruptEnable); |
| } |
| #elif CONFIG_IPM_IMX_MAX_DATA_SIZE_16 |
| if (enable) { |
| MU_EnableInterrupts(base, kMU_Rx3FullInterruptEnable); |
| } else { |
| MU_DisableInterrupts(base, kMU_Rx3FullInterruptEnable); |
| } |
| #else |
| #error "CONFIG_IPM_IMX_MAX_DATA_SIZE_n is not set" |
| #endif |
| #else |
| #if CONFIG_IPM_IMX_MAX_DATA_SIZE_4 |
| if (enable) { |
| MU_EnableRxFullInt(base, 0U); |
| MU_EnableRxFullInt(base, 1U); |
| MU_EnableRxFullInt(base, 2U); |
| MU_EnableRxFullInt(base, 3U); |
| } else { |
| MU_DisableRxFullInt(base, 0U); |
| MU_DisableRxFullInt(base, 1U); |
| MU_DisableRxFullInt(base, 2U); |
| MU_DisableRxFullInt(base, 3U); |
| } |
| #elif CONFIG_IPM_IMX_MAX_DATA_SIZE_8 |
| if (enable) { |
| MU_EnableRxFullInt(base, 1U); |
| MU_EnableRxFullInt(base, 3U); |
| } else { |
| MU_DisableRxFullInt(base, 1U); |
| MU_DisableRxFullInt(base, 3U); |
| } |
| #elif CONFIG_IPM_IMX_MAX_DATA_SIZE_16 |
| if (enable) { |
| MU_EnableRxFullInt(base, 3U); |
| } else { |
| MU_DisableRxFullInt(base, 3U); |
| } |
| #else |
| #error "CONFIG_IPM_IMX_MAX_DATA_SIZE_n is not set" |
| #endif |
| #endif |
| |
| return 0; |
| } |
| |
| static int imx_mu_init(const struct device *dev) |
| { |
| const struct imx_mu_config *config = dev->config; |
| |
| MU_Init(MU(config)); |
| config->irq_config_func(dev); |
| |
| return 0; |
| } |
| |
| static const struct ipm_driver_api imx_mu_driver_api = { |
| .send = imx_mu_ipm_send, |
| .register_callback = imx_mu_ipm_register_callback, |
| .max_data_size_get = imx_mu_ipm_max_data_size_get, |
| .max_id_val_get = imx_mu_ipm_max_id_val_get, |
| .set_enabled = imx_mu_ipm_set_enabled |
| }; |
| |
| /* Config MU */ |
| |
| static void imx_mu_config_func_b(const struct device *dev); |
| |
| static const struct imx_mu_config imx_mu_b_config = { |
| .base = (MU_Type *)DT_INST_REG_ADDR(0), |
| .irq_config_func = imx_mu_config_func_b, |
| }; |
| |
| static struct imx_mu_data imx_mu_b_data; |
| |
| DEVICE_DT_INST_DEFINE(0, |
| &imx_mu_init, |
| NULL, |
| &imx_mu_b_data, &imx_mu_b_config, |
| PRE_KERNEL_1, CONFIG_KERNEL_INIT_PRIORITY_DEFAULT, |
| &imx_mu_driver_api); |
| |
| static void imx_mu_config_func_b(const struct device *dev) |
| { |
| IRQ_CONNECT(DT_INST_IRQN(0), |
| DT_INST_IRQ(0, priority), |
| imx_mu_isr, DEVICE_DT_INST_GET(0), 0); |
| |
| irq_enable(DT_INST_IRQN(0)); |
| } |