/** | |
****************************************************************************** | |
* @file stm32f4xx_hal_mmc.h | |
* @author MCD Application Team | |
* @version V1.7.0 | |
* @date 17-February-2017 | |
* @brief Header file of MMC HAL module. | |
****************************************************************************** | |
* @attention | |
* | |
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> | |
* | |
* Redistribution and use in source and binary forms, with or without modification, | |
* are permitted provided that the following conditions are met: | |
* 1. Redistributions of source code must retain the above copyright notice, | |
* this list of conditions and the following disclaimer. | |
* 2. Redistributions in binary form must reproduce the above copyright notice, | |
* this list of conditions and the following disclaimer in the documentation | |
* and/or other materials provided with the distribution. | |
* 3. Neither the name of STMicroelectronics nor the names of its contributors | |
* may be used to endorse or promote products derived from this software | |
* without specific prior written permission. | |
* | |
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE | |
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER | |
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, | |
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
* | |
****************************************************************************** | |
*/ | |
/* Define to prevent recursive inclusion -------------------------------------*/ | |
#ifndef __STM32F4xx_HAL_MMC_H | |
#define __STM32F4xx_HAL_MMC_H | |
#ifdef __cplusplus | |
extern "C" { | |
#endif | |
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \ | |
defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ | |
defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \ | |
defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ | |
defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) | |
/* Includes ------------------------------------------------------------------*/ | |
#include "stm32f4xx_ll_sdmmc.h" | |
/** @addtogroup STM32F4xx_HAL_Driver | |
* @{ | |
*/ | |
/** @defgroup MMC MMC | |
* @brief MMC HAL module driver | |
* @{ | |
*/ | |
/* Exported types ------------------------------------------------------------*/ | |
/** @defgroup MMC_Exported_Types MMC Exported Types | |
* @{ | |
*/ | |
/** @defgroup MMC_Exported_Types_Group1 MMC State enumeration structure | |
* @{ | |
*/ | |
typedef enum | |
{ | |
HAL_MMC_STATE_RESET = 0x00000000U, /*!< MMC not yet initialized or disabled */ | |
HAL_MMC_STATE_READY = 0x00000001U, /*!< MMC initialized and ready for use */ | |
HAL_MMC_STATE_TIMEOUT = 0x00000002U, /*!< MMC Timeout state */ | |
HAL_MMC_STATE_BUSY = 0x00000003U, /*!< MMC process ongoing */ | |
HAL_MMC_STATE_PROGRAMMING = 0x00000004U, /*!< MMC Programming State */ | |
HAL_MMC_STATE_RECEIVING = 0x00000005U, /*!< MMC Receinving State */ | |
HAL_MMC_STATE_TRANSFER = 0x00000006U, /*!< MMC Transfert State */ | |
HAL_MMC_STATE_ERROR = 0x0000000FU /*!< MMC is in error state */ | |
}HAL_MMC_StateTypeDef; | |
/** | |
* @} | |
*/ | |
/** @defgroup MMC_Exported_Types_Group2 MMC Card State enumeration structure | |
* @{ | |
*/ | |
typedef enum | |
{ | |
HAL_MMC_CARD_READY = 0x00000001U, /*!< Card state is ready */ | |
HAL_MMC_CARD_IDENTIFICATION = 0x00000002U, /*!< Card is in identification state */ | |
HAL_MMC_CARD_STANDBY = 0x00000003U, /*!< Card is in standby state */ | |
HAL_MMC_CARD_TRANSFER = 0x00000004U, /*!< Card is in transfer state */ | |
HAL_MMC_CARD_SENDING = 0x00000005U, /*!< Card is sending an operation */ | |
HAL_MMC_CARD_RECEIVING = 0x00000006U, /*!< Card is receiving operation information */ | |
HAL_MMC_CARD_PROGRAMMING = 0x00000007U, /*!< Card is in programming state */ | |
HAL_MMC_CARD_DISCONNECTED = 0x00000008U, /*!< Card is disconnected */ | |
HAL_MMC_CARD_ERROR = 0x000000FFU /*!< Card response Error */ | |
}HAL_MMC_CardStateTypeDef; | |
/** | |
* @} | |
*/ | |
/** @defgroup MMC_Exported_Types_Group3 MMC Handle Structure definition | |
* @{ | |
*/ | |
#define MMC_InitTypeDef SDIO_InitTypeDef | |
#define MMC_TypeDef SDIO_TypeDef | |
/** | |
* @brief MMC Card Information Structure definition | |
*/ | |
typedef struct | |
{ | |
uint32_t CardType; /*!< Specifies the card Type */ | |
uint32_t Class; /*!< Specifies the class of the card class */ | |
uint32_t RelCardAdd; /*!< Specifies the Relative Card Address */ | |
uint32_t BlockNbr; /*!< Specifies the Card Capacity in blocks */ | |
uint32_t BlockSize; /*!< Specifies one block size in bytes */ | |
uint32_t LogBlockNbr; /*!< Specifies the Card logical Capacity in blocks */ | |
uint32_t LogBlockSize; /*!< Specifies logical block size in bytes */ | |
}HAL_MMC_CardInfoTypeDef; | |
/** | |
* @brief MMC handle Structure definition | |
*/ | |
typedef struct | |
{ | |
MMC_TypeDef *Instance; /*!< MMC registers base address */ | |
MMC_InitTypeDef Init; /*!< MMC required parameters */ | |
HAL_LockTypeDef Lock; /*!< MMC locking object */ | |
uint32_t *pTxBuffPtr; /*!< Pointer to MMC Tx transfer Buffer */ | |
uint32_t TxXferSize; /*!< MMC Tx Transfer size */ | |
uint32_t *pRxBuffPtr; /*!< Pointer to MMC Rx transfer Buffer */ | |
uint32_t RxXferSize; /*!< MMC Rx Transfer size */ | |
__IO uint32_t Context; /*!< MMC transfer context */ | |
__IO HAL_MMC_StateTypeDef State; /*!< MMC card State */ | |
__IO uint32_t ErrorCode; /*!< MMC Card Error codes */ | |
DMA_HandleTypeDef *hdmarx; /*!< MMC Rx DMA handle parameters */ | |
DMA_HandleTypeDef *hdmatx; /*!< MMC Tx DMA handle parameters */ | |
HAL_MMC_CardInfoTypeDef MmcCard; /*!< MMC Card information */ | |
uint32_t CSD[4U]; /*!< MMC card specific data table */ | |
uint32_t CID[4U]; /*!< MMC card identification number table */ | |
}MMC_HandleTypeDef; | |
/** | |
* @} | |
*/ | |
/** @defgroup MMC_Exported_Types_Group4 Card Specific Data: CSD Register | |
* @{ | |
*/ | |
typedef struct | |
{ | |
__IO uint8_t CSDStruct; /*!< CSD structure */ | |
__IO uint8_t SysSpecVersion; /*!< System specification version */ | |
__IO uint8_t Reserved1; /*!< Reserved */ | |
__IO uint8_t TAAC; /*!< Data read access time 1 */ | |
__IO uint8_t NSAC; /*!< Data read access time 2 in CLK cycles */ | |
__IO uint8_t MaxBusClkFrec; /*!< Max. bus clock frequency */ | |
__IO uint16_t CardComdClasses; /*!< Card command classes */ | |
__IO uint8_t RdBlockLen; /*!< Max. read data block length */ | |
__IO uint8_t PartBlockRead; /*!< Partial blocks for read allowed */ | |
__IO uint8_t WrBlockMisalign; /*!< Write block misalignment */ | |
__IO uint8_t RdBlockMisalign; /*!< Read block misalignment */ | |
__IO uint8_t DSRImpl; /*!< DSR implemented */ | |
__IO uint8_t Reserved2; /*!< Reserved */ | |
__IO uint32_t DeviceSize; /*!< Device Size */ | |
__IO uint8_t MaxRdCurrentVDDMin; /*!< Max. read current @ VDD min */ | |
__IO uint8_t MaxRdCurrentVDDMax; /*!< Max. read current @ VDD max */ | |
__IO uint8_t MaxWrCurrentVDDMin; /*!< Max. write current @ VDD min */ | |
__IO uint8_t MaxWrCurrentVDDMax; /*!< Max. write current @ VDD max */ | |
__IO uint8_t DeviceSizeMul; /*!< Device size multiplier */ | |
__IO uint8_t EraseGrSize; /*!< Erase group size */ | |
__IO uint8_t EraseGrMul; /*!< Erase group size multiplier */ | |
__IO uint8_t WrProtectGrSize; /*!< Write protect group size */ | |
__IO uint8_t WrProtectGrEnable; /*!< Write protect group enable */ | |
__IO uint8_t ManDeflECC; /*!< Manufacturer default ECC */ | |
__IO uint8_t WrSpeedFact; /*!< Write speed factor */ | |
__IO uint8_t MaxWrBlockLen; /*!< Max. write data block length */ | |
__IO uint8_t WriteBlockPaPartial; /*!< Partial blocks for write allowed */ | |
__IO uint8_t Reserved3; /*!< Reserved */ | |
__IO uint8_t ContentProtectAppli; /*!< Content protection application */ | |
__IO uint8_t FileFormatGrouop; /*!< File format group */ | |
__IO uint8_t CopyFlag; /*!< Copy flag (OTP) */ | |
__IO uint8_t PermWrProtect; /*!< Permanent write protection */ | |
__IO uint8_t TempWrProtect; /*!< Temporary write protection */ | |
__IO uint8_t FileFormat; /*!< File format */ | |
__IO uint8_t ECC; /*!< ECC code */ | |
__IO uint8_t CSD_CRC; /*!< CSD CRC */ | |
__IO uint8_t Reserved4; /*!< Always 1 */ | |
}HAL_MMC_CardCSDTypeDef; | |
/** | |
* @} | |
*/ | |
/** @defgroup MMC_Exported_Types_Group5 Card Identification Data: CID Register | |
* @{ | |
*/ | |
typedef struct | |
{ | |
__IO uint8_t ManufacturerID; /*!< Manufacturer ID */ | |
__IO uint16_t OEM_AppliID; /*!< OEM/Application ID */ | |
__IO uint32_t ProdName1; /*!< Product Name part1 */ | |
__IO uint8_t ProdName2; /*!< Product Name part2 */ | |
__IO uint8_t ProdRev; /*!< Product Revision */ | |
__IO uint32_t ProdSN; /*!< Product Serial Number */ | |
__IO uint8_t Reserved1; /*!< Reserved1 */ | |
__IO uint16_t ManufactDate; /*!< Manufacturing Date */ | |
__IO uint8_t CID_CRC; /*!< CID CRC */ | |
__IO uint8_t Reserved2; /*!< Always 1 */ | |
}HAL_MMC_CardCIDTypeDef; | |
/** | |
* @} | |
*/ | |
/** @defgroup MMC_Exported_Types_Group6 MMC Card Status returned by ACMD13 | |
* @{ | |
*/ | |
typedef struct | |
{ | |
__IO uint8_t DataBusWidth; /*!< Shows the currently defined data bus width */ | |
__IO uint8_t SecuredMode; /*!< Card is in secured mode of operation */ | |
__IO uint16_t CardType; /*!< Carries information about card type */ | |
__IO uint32_t ProtectedAreaSize; /*!< Carries information about the capacity of protected area */ | |
__IO uint8_t SpeedClass; /*!< Carries information about the speed class of the card */ | |
__IO uint8_t PerformanceMove; /*!< Carries information about the card's performance move */ | |
__IO uint8_t AllocationUnitSize; /*!< Carries information about the card's allocation unit size */ | |
__IO uint16_t EraseSize; /*!< Determines the number of AUs to be erased in one operation */ | |
__IO uint8_t EraseTimeout; /*!< Determines the timeout for any number of AU erase */ | |
__IO uint8_t EraseOffset; /*!< Carries information about the erase offset */ | |
}HAL_MMC_CardStatusTypeDef; | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/* Exported constants --------------------------------------------------------*/ | |
/** @defgroup MMC_Exported_Constants Exported Constants | |
* @{ | |
*/ | |
#define BLOCKSIZE 512U /*!< Block size is 512 bytes */ | |
#define CAPACITY 0x400000U /*!< Log Block Nuumber for 2 G bytes Cards */ | |
/** @defgroup MMC_Exported_Constansts_Group1 MMC Error status enumeration Structure definition | |
* @{ | |
*/ | |
#define HAL_MMC_ERROR_NONE SDMMC_ERROR_NONE /*!< No error */ | |
#define HAL_MMC_ERROR_CMD_CRC_FAIL SDMMC_ERROR_CMD_CRC_FAIL /*!< Command response received (but CRC check failed) */ | |
#define HAL_MMC_ERROR_DATA_CRC_FAIL SDMMC_ERROR_DATA_CRC_FAIL /*!< Data block sent/received (CRC check failed) */ | |
#define HAL_MMC_ERROR_CMD_RSP_TIMEOUT SDMMC_ERROR_CMD_RSP_TIMEOUT /*!< Command response timeout */ | |
#define HAL_MMC_ERROR_DATA_TIMEOUT SDMMC_ERROR_DATA_TIMEOUT /*!< Data timeout */ | |
#define HAL_MMC_ERROR_TX_UNDERRUN SDMMC_ERROR_TX_UNDERRUN /*!< Transmit FIFO underrun */ | |
#define HAL_MMC_ERROR_RX_OVERRUN SDMMC_ERROR_RX_OVERRUN /*!< Receive FIFO overrun */ | |
#define HAL_MMC_ERROR_ADDR_MISALIGNED SDMMC_ERROR_ADDR_MISALIGNED /*!< Misaligned address */ | |
#define HAL_MMC_ERROR_BLOCK_LEN_ERR SDMMC_ERROR_BLOCK_LEN_ERR /*!< Transferred block length is not allowed for the card or the | |
number of transferred bytes does not match the block length */ | |
#define HAL_MMC_ERROR_ERASE_SEQ_ERR SDMMC_ERROR_ERASE_SEQ_ERR /*!< An error in the sequence of erase command occurs */ | |
#define HAL_MMC_ERROR_BAD_ERASE_PARAM SDMMC_ERROR_BAD_ERASE_PARAM /*!< An invalid selection for erase groups */ | |
#define HAL_MMC_ERROR_WRITE_PROT_VIOLATION SDMMC_ERROR_WRITE_PROT_VIOLATION /*!< Attempt to program a write protect block */ | |
#define HAL_MMC_ERROR_LOCK_UNLOCK_FAILED SDMMC_ERROR_LOCK_UNLOCK_FAILED /*!< Sequence or password error has been detected in unlock | |
command or if there was an attempt to access a locked card */ | |
#define HAL_MMC_ERROR_COM_CRC_FAILED SDMMC_ERROR_COM_CRC_FAILED /*!< CRC check of the previous command failed */ | |
#define HAL_MMC_ERROR_ILLEGAL_CMD SDMMC_ERROR_ILLEGAL_CMD /*!< Command is not legal for the card state */ | |
#define HAL_MMC_ERROR_CARD_ECC_FAILED SDMMC_ERROR_CARD_ECC_FAILED /*!< Card internal ECC was applied but failed to correct the data */ | |
#define HAL_MMC_ERROR_CC_ERR SDMMC_ERROR_CC_ERR /*!< Internal card controller error */ | |
#define HAL_MMC_ERROR_GENERAL_UNKNOWN_ERR SDMMC_ERROR_GENERAL_UNKNOWN_ERR /*!< General or unknown error */ | |
#define HAL_MMC_ERROR_STREAM_READ_UNDERRUN SDMMC_ERROR_STREAM_READ_UNDERRUN /*!< The card could not sustain data reading in stream rmode */ | |
#define HAL_MMC_ERROR_STREAM_WRITE_OVERRUN SDMMC_ERROR_STREAM_WRITE_OVERRUN /*!< The card could not sustain data programming in stream mode */ | |
#define HAL_MMC_ERROR_CID_CSD_OVERWRITE SDMMC_ERROR_CID_CSD_OVERWRITE /*!< CID/CSD overwrite error */ | |
#define HAL_MMC_ERROR_WP_ERASE_SKIP SDMMC_ERROR_WP_ERASE_SKIP /*!< Only partial address space was erased */ | |
#define HAL_MMC_ERROR_CARD_ECC_DISABLED SDMMC_ERROR_CARD_ECC_DISABLED /*!< Command has been executed without using internal ECC */ | |
#define HAL_MMC_ERROR_ERASE_RESET SDMMC_ERROR_ERASE_RESET /*!< Erase sequence was cleared before executing because an out | |
of erase sequence command was received */ | |
#define HAL_MMC_ERROR_AKE_SEQ_ERR SDMMC_ERROR_AKE_SEQ_ERR /*!< Error in sequence of authentication */ | |
#define HAL_MMC_ERROR_INVALID_VOLTRANGE SDMMC_ERROR_INVALID_VOLTRANGE /*!< Error in case of invalid voltage range */ | |
#define HAL_MMC_ERROR_ADDR_OUT_OF_RANGE SDMMC_ERROR_ADDR_OUT_OF_RANGE /*!< Error when addressed block is out of range */ | |
#define HAL_MMC_ERROR_REQUEST_NOT_APPLICABLE SDMMC_ERROR_REQUEST_NOT_APPLICABLE /*!< Error when command request is not applicable */ | |
#define HAL_MMC_ERROR_PARAM SDMMC_ERROR_INVALID_PARAMETER /*!< the used parameter is not valid */ | |
#define HAL_MMC_ERROR_UNSUPPORTED_FEATURE SDMMC_ERROR_UNSUPPORTED_FEATURE /*!< Error when feature is not insupported */ | |
#define HAL_MMC_ERROR_BUSY SDMMC_ERROR_BUSY /*!< Error when transfer process is busy */ | |
#define HAL_MMC_ERROR_DMA SDMMC_ERROR_DMA /*!< Error while DMA transfer */ | |
#define HAL_MMC_ERROR_TIMEOUT SDMMC_ERROR_TIMEOUT /*!< Timeout error */ | |
/** | |
* @} | |
*/ | |
/** @defgroup MMC_Exported_Constansts_Group2 MMC context enumeration structure | |
* @{ | |
*/ | |
#define MMC_CONTEXT_NONE 0x00000000U /*!< None */ | |
#define MMC_CONTEXT_READ_SINGLE_BLOCK 0x00000001U /*!< Read single block operation */ | |
#define MMC_CONTEXT_READ_MULTIPLE_BLOCK 0x00000002U /*!< Read multiple blocks operation */ | |
#define MMC_CONTEXT_WRITE_SINGLE_BLOCK 0x00000010U /*!< Write single block operation */ | |
#define MMC_CONTEXT_WRITE_MULTIPLE_BLOCK 0x00000020U /*!< Write multiple blocks operation */ | |
#define MMC_CONTEXT_IT 0x00000008U /*!< Process in Interrupt mode */ | |
#define MMC_CONTEXT_DMA 0x00000080U /*!< Process in DMA mode */ | |
/** | |
* @} | |
*/ | |
/** @defgroup MMC_Exported_Constansts_Group3 MMC Voltage mode | |
* @{ | |
*/ | |
/** | |
* @brief | |
*/ | |
#define MMC_HIGH_VOLTAGE_RANGE 0x80FF8000U /*!< VALUE OF ARGUMENT */ | |
#define MMC_DUAL_VOLTAGE_RANGE 0x80FF8080U /*!< VALUE OF ARGUMENT */ | |
#define eMMC_HIGH_VOLTAGE_RANGE 0xC0FF8000U /*!< for eMMC > 2Gb sector mode */ | |
#define eMMC_DUAL_VOLTAGE_RANGE 0xC0FF8080U /*!< for eMMC > 2Gb sector mode */ | |
#define MMC_INVALID_VOLTAGE_RANGE 0x0001FF01U | |
/** | |
* @} | |
*/ | |
/** @defgroup MMC_Exported_Constansts_Group4 MMC Memory Cards | |
* @{ | |
*/ | |
#define MMC_HIGH_VOLTAGE_CARD 0x00000000U | |
#define MMC_DUAL_VOLTAGE_CARD 0x00000001U | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/* Exported macro ------------------------------------------------------------*/ | |
/** @defgroup MMC_Exported_macros MMC Exported Macros | |
* @brief macros to handle interrupts and specific clock configurations | |
* @{ | |
*/ | |
/** | |
* @brief Enable the MMC device. | |
* @retval None | |
*/ | |
#define __HAL_MMC_ENABLE(__HANDLE__) __SDIO_ENABLE((__HANDLE__)->Instance) | |
/** | |
* @brief Disable the MMC device. | |
* @retval None | |
*/ | |
#define __HAL_MMC_DISABLE(__HANDLE__) __SDIO_DISABLE((__HANDLE__)->Instance) | |
/** | |
* @brief Enable the SDMMC DMA transfer. | |
* @retval None | |
*/ | |
#define __HAL_MMC_DMA_ENABLE(__HANDLE__) __SDIO_DMA_ENABLE((__HANDLE__)->Instance) | |
/** | |
* @brief Disable the SDMMC DMA transfer. | |
* @retval None | |
*/ | |
#define __HAL_MMC_DMA_DISABLE(__HANDLE__) __SDIO_DMA_DISABLE((__HANDLE__)->Instance) | |
/** | |
* @brief Enable the MMC device interrupt. | |
* @param __HANDLE__: MMC Handle | |
* @param __INTERRUPT__: specifies the SDMMC interrupt sources to be enabled. | |
* This parameter can be one or a combination of the following values: | |
* @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt | |
* @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt | |
* @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt | |
* @arg SDIO_IT_DTIMEOUT: Data timeout interrupt | |
* @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt | |
* @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt | |
* @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt | |
* @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt | |
* @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt | |
* @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt | |
* @arg SDIO_IT_CMDACT: Command transfer in progress interrupt | |
* @arg SDIO_IT_TXACT: Data transmit in progress interrupt | |
* @arg SDIO_IT_RXACT: Data receive in progress interrupt | |
* @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt | |
* @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt | |
* @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt | |
* @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt | |
* @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt | |
* @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt | |
* @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt | |
* @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt | |
* @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt | |
* @retval None | |
*/ | |
#define __HAL_MMC_ENABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_ENABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__)) | |
/** | |
* @brief Disable the MMC device interrupt. | |
* @param __HANDLE__: MMC Handle | |
* @param __INTERRUPT__: specifies the SDMMC interrupt sources to be disabled. | |
* This parameter can be one or a combination of the following values: | |
* @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt | |
* @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt | |
* @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt | |
* @arg SDIO_IT_DTIMEOUT: Data timeout interrupt | |
* @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt | |
* @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt | |
* @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt | |
* @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt | |
* @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt | |
* @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt | |
* @arg SDIO_IT_CMDACT: Command transfer in progress interrupt | |
* @arg SDIO_IT_TXACT: Data transmit in progress interrupt | |
* @arg SDIO_IT_RXACT: Data receive in progress interrupt | |
* @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt | |
* @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt | |
* @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt | |
* @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt | |
* @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt | |
* @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt | |
* @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt | |
* @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt | |
* @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt | |
* @retval None | |
*/ | |
#define __HAL_MMC_DISABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_DISABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__)) | |
/** | |
* @brief Check whether the specified MMC flag is set or not. | |
* @param __HANDLE__: MMC Handle | |
* @param __FLAG__: specifies the flag to check. | |
* This parameter can be one of the following values: | |
* @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) | |
* @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) | |
* @arg SDIO_FLAG_CTIMEOUT: Command response timeout | |
* @arg SDIO_FLAG_DTIMEOUT: Data timeout | |
* @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error | |
* @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error | |
* @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) | |
* @arg SDIO_FLAG_CMDSENT: Command sent (no response required) | |
* @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) | |
* @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) | |
* @arg SDIO_FLAG_CMDACT: Command transfer in progress | |
* @arg SDIO_FLAG_TXACT: Data transmit in progress | |
* @arg SDIO_FLAG_RXACT: Data receive in progress | |
* @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty | |
* @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full | |
* @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full | |
* @arg SDIO_FLAG_RXFIFOF: Receive FIFO full | |
* @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty | |
* @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty | |
* @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO | |
* @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO | |
* @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received | |
* @retval The new state of MMC FLAG (SET or RESET). | |
*/ | |
#define __HAL_MMC_GET_FLAG(__HANDLE__, __FLAG__) __SDIO_GET_FLAG((__HANDLE__)->Instance, (__FLAG__)) | |
/** | |
* @brief Clear the MMC's pending flags. | |
* @param __HANDLE__: MMC Handle | |
* @param __FLAG__: specifies the flag to clear. | |
* This parameter can be one or a combination of the following values: | |
* @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) | |
* @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) | |
* @arg SDIO_FLAG_CTIMEOUT: Command response timeout | |
* @arg SDIO_FLAG_DTIMEOUT: Data timeout | |
* @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error | |
* @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error | |
* @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) | |
* @arg SDIO_FLAG_CMDSENT: Command sent (no response required) | |
* @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) | |
* @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) | |
* @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received | |
* @retval None | |
*/ | |
#define __HAL_MMC_CLEAR_FLAG(__HANDLE__, __FLAG__) __SDIO_CLEAR_FLAG((__HANDLE__)->Instance, (__FLAG__)) | |
/** | |
* @brief Check whether the specified MMC interrupt has occurred or not. | |
* @param __HANDLE__: MMC Handle | |
* @param __INTERRUPT__: specifies the SDMMC interrupt source to check. | |
* This parameter can be one of the following values: | |
* @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt | |
* @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt | |
* @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt | |
* @arg SDIO_IT_DTIMEOUT: Data timeout interrupt | |
* @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt | |
* @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt | |
* @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt | |
* @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt | |
* @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt | |
* @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt | |
* @arg SDIO_IT_CMDACT: Command transfer in progress interrupt | |
* @arg SDIO_IT_TXACT: Data transmit in progress interrupt | |
* @arg SDIO_IT_RXACT: Data receive in progress interrupt | |
* @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt | |
* @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt | |
* @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt | |
* @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt | |
* @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt | |
* @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt | |
* @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt | |
* @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt | |
* @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt | |
* @retval The new state of MMC IT (SET or RESET). | |
*/ | |
#define __HAL_MMC_GET_IT(__HANDLE__, __INTERRUPT__) __SDIO_GET_IT((__HANDLE__)->Instance, (__INTERRUPT__)) | |
/** | |
* @brief Clear the MMC's interrupt pending bits. | |
* @param __HANDLE__: MMC Handle | |
* @param __INTERRUPT__: specifies the interrupt pending bit to clear. | |
* This parameter can be one or a combination of the following values: | |
* @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt | |
* @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt | |
* @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt | |
* @arg SDIO_IT_DTIMEOUT: Data timeout interrupt | |
* @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt | |
* @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt | |
* @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt | |
* @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt | |
* @arg SDIO_IT_DATAEND: Data end (data counter, SDMMC_DCOUNT, is zero) interrupt | |
* @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt | |
* @retval None | |
*/ | |
#define __HAL_MMC_CLEAR_IT(__HANDLE__, __INTERRUPT__) __SDIO_CLEAR_IT((__HANDLE__)->Instance, (__INTERRUPT__)) | |
/** | |
* @} | |
*/ | |
/* Exported functions --------------------------------------------------------*/ | |
/** @defgroup MMC_Exported_Functions MMC Exported Functions | |
* @{ | |
*/ | |
/** @defgroup MMC_Exported_Functions_Group1 Initialization and de-initialization functions | |
* @{ | |
*/ | |
HAL_StatusTypeDef HAL_MMC_Init(MMC_HandleTypeDef *hmmc); | |
HAL_StatusTypeDef HAL_MMC_InitCard(MMC_HandleTypeDef *hmmc); | |
HAL_StatusTypeDef HAL_MMC_DeInit (MMC_HandleTypeDef *hmmc); | |
void HAL_MMC_MspInit(MMC_HandleTypeDef *hmmc); | |
void HAL_MMC_MspDeInit(MMC_HandleTypeDef *hmmc); | |
/** | |
* @} | |
*/ | |
/** @defgroup MMC_Exported_Functions_Group2 Input and Output operation functions | |
* @{ | |
*/ | |
/* Blocking mode: Polling */ | |
HAL_StatusTypeDef HAL_MMC_ReadBlocks(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout); | |
HAL_StatusTypeDef HAL_MMC_WriteBlocks(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout); | |
HAL_StatusTypeDef HAL_MMC_Erase(MMC_HandleTypeDef *hmmc, uint32_t BlockStartAdd, uint32_t BlockEndAdd); | |
/* Non-Blocking mode: IT */ | |
HAL_StatusTypeDef HAL_MMC_ReadBlocks_IT(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks); | |
HAL_StatusTypeDef HAL_MMC_WriteBlocks_IT(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks); | |
/* Non-Blocking mode: DMA */ | |
HAL_StatusTypeDef HAL_MMC_ReadBlocks_DMA(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks); | |
HAL_StatusTypeDef HAL_MMC_WriteBlocks_DMA(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks); | |
void HAL_MMC_IRQHandler(MMC_HandleTypeDef *hmmc); | |
/* Callback in non blocking modes (DMA) */ | |
void HAL_MMC_TxCpltCallback(MMC_HandleTypeDef *hmmc); | |
void HAL_MMC_RxCpltCallback(MMC_HandleTypeDef *hmmc); | |
void HAL_MMC_ErrorCallback(MMC_HandleTypeDef *hmmc); | |
void HAL_MMC_AbortCallback(MMC_HandleTypeDef *hmmc); | |
/** | |
* @} | |
*/ | |
/** @defgroup MMC_Exported_Functions_Group3 Peripheral Control functions | |
* @{ | |
*/ | |
HAL_StatusTypeDef HAL_MMC_ConfigWideBusOperation(MMC_HandleTypeDef *hmmc, uint32_t WideMode); | |
/** | |
* @} | |
*/ | |
/** @defgroup MMC_Exported_Functions_Group4 MMC card related functions | |
* @{ | |
*/ | |
HAL_MMC_CardStateTypeDef HAL_MMC_GetCardState(MMC_HandleTypeDef *hmmc); | |
HAL_StatusTypeDef HAL_MMC_GetCardCID(MMC_HandleTypeDef *hmmc, HAL_MMC_CardCIDTypeDef *pCID); | |
HAL_StatusTypeDef HAL_MMC_GetCardCSD(MMC_HandleTypeDef *hmmc, HAL_MMC_CardCSDTypeDef *pCSD); | |
HAL_StatusTypeDef HAL_MMC_GetCardInfo(MMC_HandleTypeDef *hmmc, HAL_MMC_CardInfoTypeDef *pCardInfo); | |
/** | |
* @} | |
*/ | |
/** @defgroup MMC_Exported_Functions_Group5 Peripheral State and Errors functions | |
* @{ | |
*/ | |
HAL_MMC_StateTypeDef HAL_MMC_GetState(MMC_HandleTypeDef *hmmc); | |
uint32_t HAL_MMC_GetError(MMC_HandleTypeDef *hmmc); | |
/** | |
* @} | |
*/ | |
/** @defgroup MMC_Exported_Functions_Group6 Perioheral Abort management | |
* @{ | |
*/ | |
HAL_StatusTypeDef HAL_MMC_Abort(MMC_HandleTypeDef *hmmc); | |
HAL_StatusTypeDef HAL_MMC_Abort_IT(MMC_HandleTypeDef *hmmc); | |
/** | |
* @} | |
*/ | |
/* Private types -------------------------------------------------------------*/ | |
/** @defgroup MMC_Private_Types MMC Private Types | |
* @{ | |
*/ | |
/** | |
* @} | |
*/ | |
/* Private defines -----------------------------------------------------------*/ | |
/** @defgroup MMC_Private_Defines MMC Private Defines | |
* @{ | |
*/ | |
/** | |
* @} | |
*/ | |
/* Private variables ---------------------------------------------------------*/ | |
/** @defgroup MMC_Private_Variables MMC Private Variables | |
* @{ | |
*/ | |
/** | |
* @} | |
*/ | |
/* Private constants ---------------------------------------------------------*/ | |
/** @defgroup MMC_Private_Constants MMC Private Constants | |
* @{ | |
*/ | |
/** | |
* @} | |
*/ | |
/* Private macros ------------------------------------------------------------*/ | |
/** @defgroup MMC_Private_Macros MMC Private Macros | |
* @{ | |
*/ | |
/** | |
* @} | |
*/ | |
/* Private functions prototypes ----------------------------------------------*/ | |
/** @defgroup MMC_Private_Functions_Prototypes MMC Private Functions Prototypes | |
* @{ | |
*/ | |
/** | |
* @} | |
*/ | |
/* Private functions ---------------------------------------------------------*/ | |
/** @defgroup MMC_Private_Functions MMC Private Functions | |
* @{ | |
*/ | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || | |
STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || | |
STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ | |
#ifdef __cplusplus | |
} | |
#endif | |
#endif /* __STM32F4xx_HAL_MMC_H */ | |
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |