blob: da16be7104a889a40ae5ac7f4d0925aa924fec42 [file] [log] [blame]
/** @file
* @brief Common routines needed in various network applications.
*/
/*
* Copyright (c) 2017 Intel Corporation
*
* SPDX-License-Identifier: Apache-2.0
*/
#ifndef __NET_APP_H
#define __NET_APP_H
#if defined(CONFIG_NET_APP_TLS)
#if defined(CONFIG_MBEDTLS)
#if !defined(CONFIG_MBEDTLS_CFG_FILE)
#include "mbedtls/config.h"
#else
#include CONFIG_MBEDTLS_CFG_FILE
#endif /* CONFIG_MBEDTLS_CFG_FILE */
#if defined(MBEDTLS_PLATFORM_C)
#include "mbedtls/platform.h"
#else
#include <stdlib.h>
#define mbedtls_time_t time_t
#define MBEDTLS_EXIT_SUCCESS EXIT_SUCCESS
#define MBEDTLS_EXIT_FAILURE EXIT_FAILURE
#endif /* MBEDTLS_PLATFORM_C */
#include <mbedtls/ssl_cookie.h>
#include <mbedtls/entropy.h>
#include <mbedtls/ctr_drbg.h>
#include <mbedtls/net_sockets.h>
#include <mbedtls/x509.h>
#include <mbedtls/x509_crt.h>
#include <mbedtls/ssl.h>
#include <mbedtls/error.h>
#include <mbedtls/debug.h>
#endif /* CONFIG_MBEDTLS */
#endif /* CONFIG_NET_APP_TLS */
#include <net/net_ip.h>
#include <net/net_pkt.h>
#include <net/net_context.h>
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief Network application library
* @defgroup net_app Network Application Library
* @{
*/
/** Flags that tell what kind of functionality is needed by the application. */
#define NET_APP_NEED_ROUTER 0x00000001
#define NET_APP_NEED_IPV6 0x00000002
#define NET_APP_NEED_IPV4 0x00000004
enum net_app_type {
NET_APP_UNSPEC = 0,
NET_APP_SERVER,
NET_APP_CLIENT,
};
struct net_app_ctx;
/**
* @typedef net_app_recv_cb_t
* @brief Network data receive callback.
*
* @details The recv callback is called after a network data is
* received.
*
* @param ctx The context to use.
* @param pkt Network buffer that is received. If the pkt is not NULL,
* then the callback will own the buffer and it needs to to unref the pkt
* as soon as it has finished working with it. On EOF, pkt will be NULL.
* @param status Value is set to 0 if some data or the connection is
* at EOF, <0 if there was an error receiving data, in this case the
* pkt parameter is set to NULL.
* @param user_data The user data given in init call.
*/
typedef void (*net_app_recv_cb_t)(struct net_app_ctx *ctx,
struct net_pkt *pkt,
int status,
void *user_data);
/**
* @typedef net_app_connect_cb_t
* @brief Connection callback.
*
* @details The connect callback is called after a connection is being
* established.
*
* @param ctx The context to use.
* @param status Status of the connection establishment. This is 0
* if the connection was established successfully, <0 if there was an
* error.
* @param user_data The user data given in init call.
*/
typedef void (*net_app_connect_cb_t)(struct net_app_ctx *ctx,
int status,
void *user_data);
/**
* @typedef net_app_send_cb_t
* @brief Network data send callback.
*
* @details The send callback is called after a network data is
* sent.
*
* @param ctx The context to use.
* @param status Value is set to 0 if all data was sent ok, <0 if
* there was an error sending data. >0 amount of data that was
* sent when not all data was sent ok.
* @param user_data_send The user data given in net_app_send() call.
* @param user_data The user data given in init call.
*/
typedef void (*net_app_send_cb_t)(struct net_app_ctx *ctx,
int status,
void *user_data_send,
void *user_data);
/**
* @typedef net_app_close_cb_t
* @brief Close callback.
*
* @details The close callback is called after a connection is being
* shutdown.
*
* @param ctx The context to use.
* @param status Error code for the closing.
* @param user_data The user data given in init call.
*/
typedef void (*net_app_close_cb_t)(struct net_app_ctx *ctx,
int status,
void *user_data);
/** Network application callbacks */
struct net_app_cb {
/** Function that is called when a connection is established.
*/
net_app_connect_cb_t connect;
/** Function that is called when data is received from network.
*/
net_app_recv_cb_t recv;
/** Function that is called when net_pkt is sent.
*/
net_app_send_cb_t send;
/** Function that is called when connection is shutdown.
*/
net_app_close_cb_t close;
};
/* This is the same prototype as what net_context_sendto() has
* so that we can override the sending of the data for TLS traffic.
*/
typedef int (*net_app_send_data_t)(struct net_pkt *pkt,
const struct sockaddr *dst_addr,
socklen_t addrlen,
net_context_send_cb_t cb,
s32_t timeout,
void *token,
void *user_data);
#if defined(CONFIG_NET_APP_TLS)
/* Internal information for managing TLS data */
struct tls_context {
struct net_pkt *rx_pkt;
struct net_buf *frag;
struct k_sem tx_sem;
struct k_fifo tx_rx_fifo;
int remaining;
#if defined(CONFIG_NET_APP_DTLS) && defined(CONFIG_NET_APP_SERVER)
char client_id;
#endif
};
/* This struct is used to pass data to TLS thread when reading or sending
* data.
*/
struct net_app_fifo_block {
struct k_mem_block block;
struct net_pkt *pkt;
void *token; /* Used when sending data */
net_context_send_cb_t cb;
u8_t dir;
};
#define NET_APP_TLS_POOL_DEFINE(name, count) \
K_MEM_POOL_DEFINE(name, sizeof(struct net_app_fifo_block), \
sizeof(struct net_app_fifo_block), count, sizeof(int))
#if defined(CONFIG_NET_APP_SERVER)
/**
* @typedef net_app_cert_cb_t
* @brief Callback used when the API user needs to setup the certs.
*
* @param ctx Net app context.
* @param cert MBEDTLS certificate
* @param pkey MBEDTLS private key
*
* @return 0 if ok, <0 if there is an error
*/
typedef int (*net_app_cert_cb_t)(struct net_app_ctx *ctx,
mbedtls_x509_crt *cert,
mbedtls_pk_context *pkey);
#endif /* CONFIG_NET_APP_SERVER */
#if defined(CONFIG_NET_APP_CLIENT)
/**
* @typedef net_app_ca_cert_cb_t
* @brief Callback used when the API user needs to setup certs.
*
* @param ctx Net app client context.
* @param ca_cert MBEDTLS certificate. This is of type mbedtls_x509_crt
* if MBEDTLS_X509_CRT_PARSE_C is defined.
*
* @return 0 if ok, <0 if there is an error
*/
typedef int (*net_app_ca_cert_cb_t)(struct net_app_ctx *ctx,
void *ca_cert);
#endif /* CONFIG_NET_APP_CLIENT */
/**
* @typedef net_app_entropy_src_cb_t
* @brief Callback used when the API user needs to setup the entropy source.
* @details This is the same as mbedtls_entropy_f_source_ptr callback.
*
* @param data Callback-specific data pointer
* @param output Data to fill
* @param len Maximum size to provide
* @param olen The actual amount of bytes put into the buffer (Can be 0)
*/
typedef int (*net_app_entropy_src_cb_t)(void *data, unsigned char *output,
size_t len, size_t *olen);
#endif /* CONFIG_NET_APP_TLS */
#if defined(CONFIG_NET_APP_DTLS)
struct dtls_timing_context {
u32_t snapshot;
u32_t int_ms;
u32_t fin_ms;
};
#endif /* CONFIG_NET_APP_DTLS */
/* Information for the context and local/remote addresses used. */
struct net_app_endpoint {
/** Network context. */
struct net_context *ctx;
/** Local address */
struct sockaddr local;
/** Remote address */
struct sockaddr remote;
};
/** Network application context. */
struct net_app_ctx {
#if defined(CONFIG_NET_IPV6)
struct net_app_endpoint ipv6;
#endif
#if defined(CONFIG_NET_IPV4)
struct net_app_endpoint ipv4;
#endif
/** What is the default endpoint for this context. */
struct net_app_endpoint *default_ctx;
/** Internal function that is called when user data is sent to
* network. By default this is set to net_context_sendto() but
* is overridden for TLS as it requires special handling.
*/
net_app_send_data_t send_data;
/** Connection callbacks */
struct net_app_cb cb;
/** Internal function that is called when data is received from
* network. This will do what ever needed and then pass data to
* application.
*/
net_context_recv_cb_t recv_cb;
#if defined(CONFIG_NET_APP_DTLS)
struct {
/** Currently active network context. This will contain the
* new context that is created after connection is established
* when UDP and DTLS is used.
*/
struct net_context *ctx;
/** DTLS final timer. Connection is terminated if this expires.
*/
struct k_delayed_work fin_timer;
/** Timer flag telling whether the dtls timer has been
* cancelled or not.
*/
bool fin_timer_cancelled;
} dtls;
#endif
#if defined(CONFIG_NET_APP_SERVER)
struct {
#if defined(CONFIG_NET_TCP)
/** Currently active network context. This will contain the
* new context that is created after connection is accepted
* when TCP is enabled.
*/
struct net_context *net_ctx;
#endif
} server;
#endif /* CONFIG_NET_APP_SERVER */
#if defined(CONFIG_NET_APP_CLIENT)
struct {
/** Connect waiter */
struct k_sem connect_wait;
#if defined(CONFIG_DNS_RESOLVER)
/** DNS resolver waiter */
struct k_sem dns_wait;
/** DNS query id. This is needed if the query needs to be
* cancelled.
*/
u16_t dns_id;
#endif
} client;
#endif /* CONFIG_NET_APP_CLIENT */
#if defined(CONFIG_NET_APP_TLS)
struct {
/** TLS stack for mbedtls library. */
k_thread_stack_t stack;
/** TLS stack size. */
int stack_size;
/** TLS thread id */
k_tid_t tid;
/** TLS thread */
struct k_thread thread;
/** Memory pool for RX data */
struct k_mem_pool *pool;
/** Where the encrypted request is stored, this is to be
* provided by the user.
*/
u8_t *request_buf;
/** Hostname to be used in the certificate verification */
const char *cert_host;
/** Request buffer maximum length */
size_t request_buf_len;
/** mbedtls related configuration. */
struct {
#if defined(CONFIG_NET_APP_SERVER)
net_app_cert_cb_t cert_cb;
mbedtls_x509_crt srvcert;
mbedtls_pk_context pkey;
#endif
#if defined(CONFIG_NET_APP_CLIENT)
net_app_ca_cert_cb_t ca_cert_cb;
mbedtls_x509_crt ca_cert;
#endif
struct tls_context ssl_ctx;
net_app_entropy_src_cb_t entropy_src_cb;
mbedtls_entropy_context entropy;
mbedtls_ctr_drbg_context ctr_drbg;
mbedtls_ssl_context ssl;
mbedtls_ssl_config conf;
#if defined(CONFIG_NET_APP_DTLS)
mbedtls_ssl_cookie_ctx cookie_ctx;
struct dtls_timing_context timing_ctx;
#endif
u8_t *personalization_data;
size_t personalization_data_len;
} mbedtls;
/** Have we called connect cb yet? */
bool connect_cb_called;
} tls;
#endif /* CONFIG_NET_APP_TLS */
#if defined(CONFIG_NET_CONTEXT_NET_PKT_POOL)
/** Network packet (net_pkt) memory pool for network contexts attached
* to this network app context.
*/
net_pkt_get_slab_func_t tx_slab;
/** Network data net_buf pool for network contexts attached to this
* network app context.
*/
net_pkt_get_pool_func_t data_pool;
#endif
/** User data pointer */
void *user_data;
#if defined(CONFIG_NET_DEBUG_APP)
/** Used when debugging with net-shell */
sys_snode_t node;
#endif
/** Type of the connection (stream or datagram) */
enum net_sock_type sock_type;
/** IP protocol type (UDP or TCP) */
enum net_ip_protocol proto;
/** Application type (client or server) of this instance */
enum net_app_type app_type;
/** Is this context setup or not */
u8_t is_init : 1;
/** Is this instance supporting TLS or not.
*/
u8_t is_tls : 1;
/** Running status of the server. If true, then the server is enabled.
* If false then it is disabled and will not serve clients.
* The server is disabled by default after initialization and will need
* to be enabled manually.
*/
u8_t is_enabled : 1;
/** Unused bits */
u8_t _padding : 5;
};
/**
* @brief Initialize this network application.
*
* @param app_info String describing this application.
* @param flags Flags related to this application startup.
* @param timeout How long to wait the network setup before continuing
* the startup.
*
* @return 0 if ok, <0 if error.
*/
int net_app_init(const char *app_info, u32_t flags, s32_t timeout);
#if defined(CONFIG_NET_CONTEXT_NET_PKT_POOL)
/**
* @brief Configure the net_pkt pool for this context.
*
* @details Use of this function is optional and if the pools are not set,
* then the default TX and DATA pools are used.
*
* @param tx_slab Function which is used when allocating TX network packet.
* This can be NULL in which case default TX memory pool is used.
* @param data_pool Function which is used when allocating data network buffer.
* This can be NULL in which case default DATA net_buf pool is used.
*/
int net_app_set_net_pkt_pool(struct net_app_ctx *ctx,
net_pkt_get_slab_func_t tx_slab,
net_pkt_get_pool_func_t data_pool);
#else
#define net_app_set_net_pkt_pool(...)
#endif /* CONFIG_NET_CONTEXT_NET_PKT_POOL */
#if defined(CONFIG_NET_APP_SERVER)
/**
* @brief Create a network server application.
*
* @details Note that caller must create the context and initialize it to 0
* before calling this function. The context must be valid for the whole
* duration of the application life cycle. This usually means that it
* cannot be allocated from stack.
*
* @param ctx Network application context.
* @param sock_type Connection type (stream or datagram).
* @param proto IP protocol (UDP or TCP)
* @param server_addr Local address of the server. If set to NULL, then the
* API will figure out a proper address where to bind the context.
* @param port UDP or TCP port number where the service is located. This is
* only used if server_addr parameter is NULL.
* @param timeout Timeout for this function call. This timeout tells how
* long to wait while accepting the data from network.
* @param user_data User specific data.
*
* @return 0 if ok, <0 if error.
*/
int net_app_init_server(struct net_app_ctx *ctx,
enum net_sock_type sock_type,
enum net_ip_protocol proto,
struct sockaddr *server_addr,
u16_t port,
void *user_data);
/**
* @brief Create a TCP server application.
*
* @details Note that caller must create the context and initialize it to 0
* before calling this function. The context must be valid for the whole
* duration of the application life cycle. This usually means that it
* cannot be allocated from stack.
*
* @param ctx Network application context.
* @param server_addr Local address of the server. If set to NULL, then the
* API will figure out a proper address where to bind the context.
* @param port UDP or TCP port number where the service is located. This is
* only used if server_addr parameter is NULL.
* @param timeout Timeout for this function call. This timeout tells how
* long to wait while accepting the data from network.
* @param user_data User specific data.
*
* @return 0 if ok, <0 if error.
*/
static inline int net_app_init_tcp_server(struct net_app_ctx *ctx,
struct sockaddr *server_addr,
u16_t port,
void *user_data)
{
return net_app_init_server(ctx,
SOCK_STREAM,
IPPROTO_TCP,
server_addr,
port,
user_data);
}
/**
* @brief Create a UDP server application.
*
* @details Note that caller must create the context and initialize it to 0
* before calling this function. The context must be valid for the whole
* duration of the application life cycle. This usually means that it
* cannot be allocated from stack.
*
* @param ctx Network application context.
* @param server_addr Local address of the server. If set to NULL, then the
* API will figure out a proper address where to bind the context.
* @param port UDP or TCP port number where the service is located. This is
* only used if server_addr parameter is NULL.
* @param timeout Timeout for this function call. This timeout tells how
* long to wait while accepting the data from network.
* @param user_data User specific data.
*
* @return 0 if ok, <0 if error.
*/
static inline int net_app_init_udp_server(struct net_app_ctx *ctx,
struct sockaddr *server_addr,
u16_t port,
void *user_data)
{
return net_app_init_server(ctx,
SOCK_DGRAM,
IPPROTO_UDP,
server_addr,
port,
user_data);
}
/**
* @brief Wait for an incoming connection.
*
* @details Note that caller must have called net_app_init_server() before
* calling this function. This functionality is separated from init function
* so that user can setup the callbacks after calling init. Only after calling
* this function the server starts to listen connection attempts. This function
* will not block but will initialize the local end point address so that
* receive callback will be called for incoming connection.
*
* @param ctx Network application context.
*
* @return 0 if ok, <0 if error.
*/
int net_app_listen(struct net_app_ctx *ctx);
#endif /* CONFIG_NET_APP_SERVER */
#if defined(CONFIG_NET_APP_CLIENT)
/**
* @brief Create a network client application.
*
* @details Note that caller must create the context and initialize it to 0
* before calling this function. The context must be valid for the whole
* duration of the application life cycle. This usually means that it
* cannot be allocated from stack.
*
* @param ctx Network application context.
* @param sock_type Connection type (stream or datagram).
* @param proto IP protocol (UDP or TCP)
* @param client_addr Local address of the client. If set to NULL, then the
* API will figure out a proper address where to bind the context.
* @param peer_addr Peer (target) address. If this is NULL, then the
* peer_add_str string and peer_port are used when connecting to peer.
* @param peer_addr_str Peer (target) address as a string. If this is NULL,
* then the peer_addr sockaddr is used to set the peer address. If DNS is
* configured in the system, then the hostname is automatically resolved if
* given here. Note that the port number is optional in the string. If the
* port number is not given in the string, then peer_port variable is used
* instead.
* Following syntax is supported for the address:
* 192.0.2.1
* 192.0.2.1:5353
* 2001:db8::1
* [2001:db8::1]:5353
* peer.example.com
* peer.example.com:1234
* @param peer_port Port number where to connect to. Ignored if port number is
* found in the peer_addr_str.
* @param timeout Timeout for this function call. This is used if the API
* needs to do some time consuming operation, like resolving DNS address.
* @param user_data User specific data.
*
* @return 0 if ok, <0 if error.
*/
int net_app_init_client(struct net_app_ctx *ctx,
enum net_sock_type sock_type,
enum net_ip_protocol proto,
struct sockaddr *client_addr,
struct sockaddr *peer_addr,
const char *peer_addr_str,
u16_t peer_port,
s32_t timeout,
void *user_data);
/**
* @brief Create a TCP client application.
*
* @details Note that caller must create the context and initialize it to 0
* before calling this function. The context must be valid for the whole
* duration of the application life cycle. This usually means that it
* cannot be allocated from stack.
*
* @param ctx Network application context.
* @param client_addr Local address of the client. If set to NULL, then the
* API will figure out a proper address where to bind the context.
* @param peer_addr Peer (target) address. If this is NULL, then the
* peer_add_str string and peer_port are used when connecting to peer.
* @param peer_addr_str Peer (target) address as a string. If this is NULL,
* then the peer_addr sockaddr is used to set the peer address. If DNS is
* configured in the system, then the hostname is automatically resolved if
* given here. Note that the port number is optional in the string. If the
* port number is not given in the string, then peer_port variable is used
* instead.
* Following syntax is supported for the address:
* 192.0.2.1
* 192.0.2.1:5353
* 2001:db8::1
* [2001:db8::1]:5353
* peer.example.com
* peer.example.com:1234
* @param peer_port Port number where to connect to. Ignored if port number is
* found in the peer_addr_str.
* @param timeout Timeout for this function call. This is used if the API
* needs to do some time consuming operation, like resolving DNS address.
* @param user_data User specific data.
*
* @return 0 if ok, <0 if error.
*/
static inline int net_app_init_tcp_client(struct net_app_ctx *ctx,
struct sockaddr *client_addr,
struct sockaddr *peer_addr,
const char *peer_addr_str,
u16_t peer_port,
s32_t timeout,
void *user_data)
{
return net_app_init_client(ctx,
SOCK_STREAM,
IPPROTO_TCP,
client_addr,
peer_addr,
peer_addr_str,
peer_port,
timeout,
user_data);
}
/**
* @brief Create a UDP client application.
*
* @details Note that caller must create the context and initialize it to 0
* before calling this function. The context must be valid for the whole
* duration of the application life cycle. This usually means that it
* cannot be allocated from stack.
*
* @param ctx Network application context.
* @param client_addr Local address of the client. If set to NULL, then the
* API will figure out a proper address where to bind the context.
* @param peer_addr Peer (target) address. If this is NULL, then the
* peer_add_str string and peer_port are used when connecting to peer.
* @param peer_addr_str Peer (target) address as a string. If this is NULL,
* then the peer_addr sockaddr is used to set the peer address. If DNS is
* configured in the system, then the hostname is automatically resolved if
* given here. Note that the port number is optional in the string. If the
* port number is not given in the string, then peer_port variable is used
* instead.
* Following syntax is supported for the address:
* 192.0.2.1
* 192.0.2.1:5353
* 2001:db8::1
* [2001:db8::1]:5353
* peer.example.com
* peer.example.com:1234
* @param peer_port Port number where to connect to. Ignored if port number is
* found in the peer_addr_str.
* @param timeout Timeout for this function call. This is used if the API
* needs to do some time consuming operation, like resolving DNS address.
* @param user_data User specific data.
*
* @return 0 if ok, <0 if error.
*/
static inline int net_app_init_udp_client(struct net_app_ctx *ctx,
struct sockaddr *client_addr,
struct sockaddr *peer_addr,
const char *peer_addr_str,
u16_t peer_port,
s32_t timeout,
void *user_data)
{
return net_app_init_client(ctx,
SOCK_DGRAM,
IPPROTO_UDP,
client_addr,
peer_addr,
peer_addr_str,
peer_port,
timeout,
user_data);
}
/**
* @brief Establish a network connection to peer.
*
* @param ctx Network application context.
* @param timeout How long to wait the network connection before giving up.
*
* @return 0 if ok, <0 if error.
*/
int net_app_connect(struct net_app_ctx *ctx, s32_t timeout);
#endif /* CONFIG_NET_APP_CLIENT */
/**
* @brief Set various network application callbacks.
*
* @param ctx Network app context.
* @param connect_cb Connect callback.
* @param recv_cb Data receive callback.
* @param send_cb Data sent callback.
* @param close_cb Close callback.
*
* @return 0 if ok, <0 if error.
*/
int net_app_set_cb(struct net_app_ctx *ctx,
net_app_connect_cb_t connect_cb,
net_app_recv_cb_t recv_cb,
net_app_send_cb_t send_cb,
net_app_close_cb_t close_cb);
/**
* @brief Send data that is found in net_pkt to peer.
*
* @details If the function return < 0, then it is caller responsibility
* to unref the pkt. If the packet was sent successfully, then the lower
* IP stack will release the network pkt.
*
* @param ctx Network application context.
* @param pkt Network packet to send.
* @param dst Destination address where to send packet. This is
* ignored for TCP data.
* @param dst_len Destination address structure size
* @param timeout How long to wait the send before giving up.
* @param user_data_send User data specific to this send call.
*
* @return 0 if ok, <0 if error.
*/
int net_app_send_pkt(struct net_app_ctx *ctx,
struct net_pkt *pkt,
const struct sockaddr *dst,
socklen_t dst_len,
s32_t timeout,
void *user_data_send);
/**
* @brief Send data that is found in user specified buffer to peer.
*
* @param ctx Network application context.
* @param buf Buffer to send.
* @param buf_len Amount of data to send.
* @param dst Destination address where to send packet. This is
* ignored for TCP data.
* @param dst_len Destination address structure size
* @param timeout How long to wait the send before giving up.
* @param user_data_send User data specific to this send call.
*
* @return 0 if ok, <0 if error.
*/
int net_app_send_buf(struct net_app_ctx *ctx,
u8_t *buf,
size_t buf_len,
const struct sockaddr *dst,
socklen_t dst_len,
s32_t timeout,
void *user_data_send);
/**
* @brief Create network packet.
*
* @param ctx Network application context.
* @param family What kind of network packet to get (AF_INET or AF_INET6)
* @param timeout How long to wait the send before giving up.
*
* @return valid net_pkt if ok, NULL if error.
*/
struct net_pkt *net_app_get_net_pkt(struct net_app_ctx *ctx,
sa_family_t family,
s32_t timeout);
/**
* @brief Create network buffer that will hold network data.
*
* @details The returned net_buf is automatically appended to the
* end of network packet fragment chain.
*
* @param ctx Network application context.
* @param pkt Network packet to where the data buf is appended.
* @param timeout How long to wait the send before giving up.
*
* @return valid net_pkt if ok, NULL if error.
*/
struct net_buf *net_app_get_net_buf(struct net_app_ctx *ctx,
struct net_pkt *pkt,
s32_t timeout);
/**
* @brief Close a network connection to peer.
*
* @param ctx Network application context.
*
* @return 0 if ok, <0 if error.
*/
int net_app_close(struct net_app_ctx *ctx);
/**
* @brief Release this network application context.
*
* @details No network data will be received via this context after this
* call.
*
* @param ctx Network application context.
*
* @return 0 if ok, <0 if error.
*/
int net_app_release(struct net_app_ctx *ctx);
#if defined(CONFIG_NET_APP_TLS)
#if defined(CONFIG_NET_APP_CLIENT)
/**
* @brief Initialize TLS support for this net_app client context.
*
* @param ctx net_app context.
* @param request_buf Caller-supplied buffer where the TLS request will be
* stored
* @param request_buf_len Length of the caller-supplied buffer.
* @param personalization_data Personalization data (Device specific
* identifiers) for random number generator. (Can be NULL).
* @param personalization_data_len Length of the personalization data.
* @param cert_cb User-supplied callback that setups the certificates.
* @param cert_host Hostname that is used to verify the server certificate.
* This value is used when net_api API calls mbedtls_ssl_set_hostname()
* which sets the hostname to check against the received server certificate.
* See https://tls.mbed.org/kb/how-to/use-sni for more details.
* This can be left NULL in which case mbedtls will silently skip certificate
* verification entirely. This option is only used if MBEDTLS_X509_CRT_PARSE_C
* is enabled in mbedtls config file.
* @param entropy_src_cb User-supplied callback that setup the entropy. This
* can be set to NULL, in which case default entropy source is used.
* @param pool Memory pool for RX data reads.
* @param stack TLS thread stack.
* @param stack_len TLS thread stack size.
*
* @return Return 0 if ok, <0 if error.
*/
int net_app_client_tls(struct net_app_ctx *ctx,
u8_t *request_buf,
size_t request_buf_len,
u8_t *personalization_data,
size_t personalization_data_len,
net_app_ca_cert_cb_t cert_cb,
const char *cert_host,
net_app_entropy_src_cb_t entropy_src_cb,
struct k_mem_pool *pool,
k_thread_stack_t stack,
size_t stack_size);
#endif /* CONFIG_NET_APP_CLIENT */
#if defined(CONFIG_NET_APP_SERVER)
/**
* @brief Initialize TLS support for this net_app server context.
*
* @param ctx net_app context.
* @param request_buf Caller-supplied buffer where the TLS request will be
* stored
* @param request_buf_len Length of the caller-supplied buffer.
* @param server_banner Print information about started service. This is only
* printed if net_app debugging is activated. The parameter can be set to NULL
* if no extra prints are needed.
* @param personalization_data Personalization data (Device specific
* identifiers) for random number generator. (Can be NULL).
* @param personalization_data_len Length of the personalization data.
* @param cert_cb User-supplied callback that setups the certificates.
* @param entropy_src_cb User-supplied callback that setup the entropy. This
* can be set to NULL, in which case default entropy source is used.
* @param pool Memory pool for RX data reads.
* @param stack TLS thread stack.
* @param stack_len TLS thread stack size.
*
* @return Return 0 if ok, <0 if error.
*/
int net_app_server_tls(struct net_app_ctx *ctx,
u8_t *request_buf,
size_t request_buf_len,
const char *server_banner,
u8_t *personalization_data,
size_t personalization_data_len,
net_app_cert_cb_t cert_cb,
net_app_entropy_src_cb_t entropy_src_cb,
struct k_mem_pool *pool,
k_thread_stack_t stack,
size_t stack_len);
bool net_app_server_tls_enable(struct net_app_ctx *ctx);
bool net_app_server_tls_disable(struct net_app_ctx *ctx);
#endif /* CONFIG_NET_APP_SERVER */
#endif /* CONFIG_NET_APP_TLS */
/**
* @}
*/
#if defined(CONFIG_NET_DEBUG_APP)
typedef void (*net_app_ctx_cb_t)(struct net_app_ctx *ctx, void *user_data);
void net_app_server_foreach(net_app_ctx_cb_t cb, void *user_data);
void net_app_client_foreach(net_app_ctx_cb_t cb, void *user_data);
#endif /* CONFIG_NET_DEBUG_APP */
#ifdef __cplusplus
}
#endif
#endif /* __NET_APP_H */