drivers/clock_control/Kconfig.stm32g0

# STM32G0 PLL configuration options

# Copyright (c) 2019 Linaro
# SPDX-License-Identifier: Apache-2.0

if SOC_SERIES_STM32G0X

config CLOCK_STM32_PLL_N_MULTIPLIER
	int "PLL multiplier"
	depends on CLOCK_STM32_SYSCLK_SRC_PLL
	default 8
	range 8 86
	help
	  PLL multiplier, allowed values: 8-86
	  PLL output must not exceed 56MHz(1.8V)/26MHz(1.2V).

config CLOCK_STM32_PLL_M_DIVISOR
	int "PLL divisor"
	depends on CLOCK_STM32_SYSCLK_SRC_PLL
	default 1
	range 1 8
	help
	  PLL divisor, allowed values: 1-8.

config CLOCK_STM32_PLL_P_DIVISOR
	int "PLL P Divisor"
	depends on CLOCK_STM32_SYSCLK_SRC_PLL
	default 2
	range 2 32
	help
	  PLL P VCO divisor, allowed values: 2-32.

config CLOCK_STM32_PLL_Q_DIVISOR
	int "PLL Q Divisor"
	depends on CLOCK_STM32_SYSCLK_SRC_PLL && (SOC_STM32G031XX || SOC_STM32G071XX)
	default 2
	range 2 8
	help
	  PLL Q VCO divisor, allowed values: 2-8.
	  Limited to STM32G0X1 variants.

config CLOCK_STM32_PLL_R_DIVISOR
	int "PLL R Divisor"
	depends on CLOCK_STM32_SYSCLK_SRC_PLL
	default 2
	range 2 8
	help
	  PLL R VCO divisor, allowed values: 2-8.

endif # SOC_SERIES_STM32G0X