| # BL5340-DVK board configuration |
| |
| # Copyright (c) 2019-2021 Nordic Semiconductor ASA |
| # Copyright (c) 2021-2023 Laird Connectivity |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| if BOARD_BL5340_DVK_NRF5340_CPUAPP || BOARD_BL5340_DVK_NRF5340_CPUAPP_NS |
| |
| config BOARD_ENABLE_DCDC_APP |
| bool "Application MCU DCDC converter" |
| select SOC_DCDC_NRF53X_APP |
| default y |
| |
| config BOARD_ENABLE_DCDC_NET |
| bool "Network MCU DCDC converter" |
| select SOC_DCDC_NRF53X_NET |
| default y |
| |
| config BOARD_ENABLE_DCDC_HV |
| bool "High Voltage DCDC converter" |
| select SOC_DCDC_NRF53X_HV |
| default y |
| |
| config BOARD_ENABLE_CPUNET |
| bool "NRF53 Network MCU" |
| select SOC_NRF_GPIO_FORWARDER_FOR_NRF5340 if \ |
| $(dt_compat_enabled,$(DT_COMPAT_NORDIC_NRF_GPIO_FORWARDER)) |
| help |
| This option enables releasing the Network 'force off' signal, which |
| as a consequence will power up the Network MCU during system boot. |
| Additionally, the option allocates GPIO pins that will be used by UARTE |
| of the Network MCU. |
| Note: GPIO pin allocation can only be configured by the secure Application |
| MCU firmware, so when this option is used with the non-secure version of |
| the board, the application needs to take into consideration, that the |
| secure firmware image must already have configured GPIO allocation for the |
| Network MCU. |
| default y if (BT || NRF_802154_SER_HOST) |
| |
| config DOMAIN_CPUNET_BOARD |
| string |
| default "bl5340_dvk/nrf5340/cpunet" |
| depends on BOARD_ENABLE_CPUNET |
| help |
| The board which will be used for CPUNET domain when creating a multi |
| image application where one or more images should be located on |
| another board. For example hci_ipc on the bl5340_dvk_cpunet for |
| Bluetooth applications. |
| |
| endif # BOARD_BL5340_DVK_NRF5340_CPUAPP || BOARD_BL5340_DVK_NRF5340_CPUAPP_NS |
| |
| if BOARD_BL5340_DVK_NRF5340_CPUNET |
| |
| config DOMAIN_CPUAPP_BOARD |
| string |
| default "bl5340_dvk/nrf5340/cpuapp" |
| help |
| The board which will be used for CPUAPP domain when creating a multi |
| image application where one or more images should be located on |
| another board. |
| |
| endif # BOARD_BL5340_DVK_NRF5340_CPUNET |
