drivers/gpio/gpio_litex.c

/*
 * Copyright (c) 2019-2021 Antmicro <www.antmicro.com>
 * Copyright (c) 2021 Raptor Engineering, LLC <sales@raptorengineering.com>
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#define DT_DRV_COMPAT litex_gpio

#include <errno.h>
#include <zephyr/device.h>
#include <zephyr/drivers/gpio.h>
#include <zephyr/types.h>
#include <zephyr/sys/util.h>
#include <string.h>
#include <zephyr/logging/log.h>

#include "gpio_utils.h"

#define SUPPORTED_FLAGS (GPIO_INPUT | GPIO_OUTPUT | \
			GPIO_OUTPUT_INIT_LOW | GPIO_OUTPUT_INIT_HIGH | \
			GPIO_ACTIVE_LOW | GPIO_ACTIVE_HIGH)

#define GPIO_LOW        0
#define GPIO_HIGH       1

#define LOG_LEVEL CONFIG_GPIO_LOG_LEVEL
LOG_MODULE_REGISTER(gpio_litex);

static const char *LITEX_LOG_REG_SIZE_NGPIOS_MISMATCH =
	"Cannot handle all of the gpios with the register of given size\n";
static const char *LITEX_LOG_CANNOT_CHANGE_DIR =
	"Cannot change port direction selected in device tree\n";

struct gpio_litex_cfg {
	uint32_t reg_addr;
	int reg_size;
	uint32_t ev_pending_addr;
	uint32_t ev_enable_addr;
	uint32_t ev_mode_addr;
	uint32_t ev_edge_addr;
	int nr_gpios;
	bool port_is_output;
};

struct gpio_litex_data {
	struct gpio_driver_data common;
	const struct device *dev;
	sys_slist_t cb;
};

/* Helper macros for GPIO */

#define DEV_GPIO_CFG(dev)						\
	((const struct gpio_litex_cfg *)(dev)->config)

/* Helper functions for bit / port access */

static inline void set_bit(const struct gpio_litex_cfg *config,
			   uint32_t bit, bool val)
{
	int regv, new_regv;

	regv = litex_read(config->reg_addr, config->reg_size);
	new_regv = (regv & ~BIT(bit)) | (val << bit);
	litex_write(config->reg_addr, config->reg_size, new_regv);
}

static inline uint32_t get_bit(const struct gpio_litex_cfg *config, uint32_t bit)
{
	int regv = litex_read(config->reg_addr, config->reg_size);

	return !!(regv & BIT(bit));
}

static inline void set_port(const struct gpio_litex_cfg *config, uint32_t value)
{
	litex_write(config->reg_addr, config->reg_size, value);
}

static inline uint32_t get_port(const struct gpio_litex_cfg *config)
{
	int regv = litex_read(config->reg_addr, config->reg_size);

	return (regv & BIT_MASK(config->nr_gpios));
}

/* Driver functions */

static int gpio_litex_configure(const struct device *dev,
				gpio_pin_t pin, gpio_flags_t flags)
{
	const struct gpio_litex_cfg *gpio_config = DEV_GPIO_CFG(dev);

	if (flags & ~SUPPORTED_FLAGS) {
		return -ENOTSUP;
	}

	if ((flags & GPIO_OUTPUT) && (flags & GPIO_INPUT)) {
		/* Pin cannot be configured as input and output */
		return -ENOTSUP;
	} else if (!(flags & (GPIO_INPUT | GPIO_OUTPUT))) {
		/* Pin has to be configured as input or output */
		return -ENOTSUP;
	}

	if (flags & GPIO_OUTPUT) {
		if (!gpio_config->port_is_output) {
			LOG_ERR("%s", LITEX_LOG_CANNOT_CHANGE_DIR);
			return -EINVAL;
		}

		if (flags & GPIO_OUTPUT_INIT_HIGH) {
			set_bit(gpio_config, pin, GPIO_HIGH);
		} else if (flags & GPIO_OUTPUT_INIT_LOW) {
			set_bit(gpio_config, pin, GPIO_LOW);
		}
	} else {
		if (gpio_config->port_is_output) {
			LOG_ERR("%s", LITEX_LOG_CANNOT_CHANGE_DIR);
			return -EINVAL;
		}
	}

	return 0;
}

static int gpio_litex_port_get_raw(const struct device *dev,
				   gpio_port_value_t *value)
{
	const struct gpio_litex_cfg *gpio_config = DEV_GPIO_CFG(dev);

	*value = get_port(gpio_config);
	return 0;
}

static int gpio_litex_port_set_masked_raw(const struct device *dev,
					  gpio_port_pins_t mask,
					  gpio_port_value_t value)
{
	const struct gpio_litex_cfg *gpio_config = DEV_GPIO_CFG(dev);
	uint32_t port_val;

	port_val = get_port(gpio_config);
	port_val = (port_val & ~mask) | (value & mask);
	set_port(gpio_config, port_val);

	return 0;
}

static int gpio_litex_port_set_bits_raw(const struct device *dev,
					gpio_port_pins_t pins)
{
	const struct gpio_litex_cfg *gpio_config = DEV_GPIO_CFG(dev);
	uint32_t port_val;

	port_val = get_port(gpio_config);
	port_val |= pins;
	set_port(gpio_config, port_val);

	return 0;
}

static int gpio_litex_port_clear_bits_raw(const struct device *dev,
					  gpio_port_pins_t pins)
{
	const struct gpio_litex_cfg *gpio_config = DEV_GPIO_CFG(dev);
	uint32_t port_val;

	port_val = get_port(gpio_config);
	port_val &= ~pins;
	set_port(gpio_config, port_val);

	return 0;
}

static int gpio_litex_port_toggle_bits(const struct device *dev,
				       gpio_port_pins_t pins)
{
	const struct gpio_litex_cfg *gpio_config = DEV_GPIO_CFG(dev);
	uint32_t port_val;

	port_val = get_port(gpio_config);
	port_val ^= pins;
	set_port(gpio_config, port_val);

	return 0;
}

static void gpio_litex_irq_handler(const struct device *dev)
{
	const struct gpio_litex_cfg *gpio_config = DEV_GPIO_CFG(dev);
	struct gpio_litex_data *data = dev->data;

	uint8_t int_status =
		litex_read(gpio_config->ev_pending_addr, gpio_config->reg_size);
	uint8_t ev_enabled =
		litex_read(gpio_config->ev_enable_addr, gpio_config->reg_size);

	/* clear events */
	litex_write(gpio_config->ev_pending_addr, gpio_config->reg_size,
			int_status);

	gpio_fire_callbacks(&data->cb, dev, int_status & ev_enabled);
}

static int gpio_litex_manage_callback(const struct device *dev,
				      struct gpio_callback *callback, bool set)
{
	struct gpio_litex_data *data = dev->data;

	return gpio_manage_callback(&data->cb, callback, set);
}

static int gpio_litex_pin_interrupt_configure(const struct device *dev,
					      gpio_pin_t pin,
					      enum gpio_int_mode mode,
					      enum gpio_int_trig trig)
{
	const struct gpio_litex_cfg *gpio_config = DEV_GPIO_CFG(dev);

	if (gpio_config->port_is_output == true) {
		return -ENOTSUP;
	}

	if (mode == GPIO_INT_MODE_EDGE) {
		uint8_t ev_enabled = litex_read(gpio_config->ev_enable_addr,
				gpio_config->reg_size);
		uint8_t ev_mode = litex_read(gpio_config->ev_mode_addr,
				gpio_config->reg_size);
		uint8_t ev_edge = litex_read(gpio_config->ev_edge_addr,
				gpio_config->reg_size);

		litex_write(gpio_config->ev_enable_addr, gpio_config->reg_size,
			    ev_enabled | BIT(pin));

		if (trig == GPIO_INT_TRIG_HIGH) {
			/* Change mode to 'edge' and edge to 'rising' */
			litex_write(gpio_config->ev_mode_addr, gpio_config->reg_size,
			    ev_mode & ~BIT(pin));
			litex_write(gpio_config->ev_edge_addr, gpio_config->reg_size,
			    ev_edge & ~BIT(pin));
		} else if (trig == GPIO_INT_TRIG_LOW) {
			/* Change mode to 'edge' and edge to 'falling' */
			litex_write(gpio_config->ev_mode_addr, gpio_config->reg_size,
			    ev_mode & ~BIT(pin));
			litex_write(gpio_config->ev_edge_addr, gpio_config->reg_size,
			    ev_edge | BIT(pin));
		} else if (trig == GPIO_INT_TRIG_BOTH) {
			/* Change mode to 'change' */
			litex_write(gpio_config->ev_mode_addr, gpio_config->reg_size,
			    ev_mode | BIT(pin));
		}
		return 0;
	}

	if (mode == GPIO_INT_DISABLE) {
		uint8_t ev_enabled = litex_read(gpio_config->ev_enable_addr,
				gpio_config->reg_size);
		litex_write(gpio_config->ev_enable_addr, gpio_config->reg_size,
			    ev_enabled & ~BIT(pin));
		return 0;
	}

	return -ENOTSUP;
}

static const struct gpio_driver_api gpio_litex_driver_api = {
	.pin_configure = gpio_litex_configure,
	.port_get_raw = gpio_litex_port_get_raw,
	.port_set_masked_raw = gpio_litex_port_set_masked_raw,
	.port_set_bits_raw = gpio_litex_port_set_bits_raw,
	.port_clear_bits_raw = gpio_litex_port_clear_bits_raw,
	.port_toggle_bits = gpio_litex_port_toggle_bits,
	.pin_interrupt_configure = gpio_litex_pin_interrupt_configure,
	.manage_callback = gpio_litex_manage_callback,
};

/* Device Instantiation */
#define GPIO_LITEX_IRQ_INIT(n) \
	do { \
		IRQ_CONNECT(DT_INST_IRQN(n), DT_INST_IRQ(n, priority), \
			    gpio_litex_irq_handler, \
			    DEVICE_DT_INST_GET(n), 0); \
\
		irq_enable(DT_INST_IRQN(n)); \
	} while (0)

#define GPIO_LITEX_INIT(n) \
	static int gpio_litex_port_init_##n(const struct device *dev); \
\
	static const struct gpio_litex_cfg gpio_litex_cfg_##n = { \
		.reg_addr = DT_INST_REG_ADDR(n), \
		.reg_size = DT_INST_REG_SIZE(n), \
		.nr_gpios = DT_INST_PROP(n, ngpios), \
		IF_ENABLED(DT_INST_IRQ_HAS_IDX(n, 0), ( \
			.ev_mode_addr    = DT_INST_REG_ADDR_BY_NAME(n, irq_mode), \
			.ev_edge_addr    = DT_INST_REG_ADDR_BY_NAME(n, irq_edge), \
			.ev_pending_addr = DT_INST_REG_ADDR_BY_NAME(n, irq_pend), \
			.ev_enable_addr  = DT_INST_REG_ADDR_BY_NAME(n, irq_en), \
		)) \
		.port_is_output = DT_INST_PROP(n, port_is_output), \
	}; \
	static struct gpio_litex_data gpio_litex_data_##n; \
\
	DEVICE_DT_INST_DEFINE(n, \
			    gpio_litex_port_init_##n, \
			    NULL, \
			    &gpio_litex_data_##n, \
			    &gpio_litex_cfg_##n, \
			    POST_KERNEL, \
			    CONFIG_GPIO_INIT_PRIORITY, \
			    &gpio_litex_driver_api \
			   ); \
\
	static int gpio_litex_port_init_##n(const struct device *dev) \
	{ \
		const struct gpio_litex_cfg *gpio_config = DEV_GPIO_CFG(dev); \
\
		/* Check if gpios fit in declared register space */ \
		/* Number of subregisters times size in bits */ \
		const int max_gpios_can_fit = DT_INST_REG_SIZE(n) / 4 \
					* CONFIG_LITEX_CSR_DATA_WIDTH; \
		if (gpio_config->nr_gpios > max_gpios_can_fit) { \
			LOG_ERR("%s", LITEX_LOG_REG_SIZE_NGPIOS_MISMATCH); \
			return -EINVAL; \
		} \
\
		IF_ENABLED(DT_INST_IRQ_HAS_IDX(n, 0), \
			   (GPIO_LITEX_IRQ_INIT(n);)) \
		return 0; \
	}

DT_INST_FOREACH_STATUS_OKAY(GPIO_LITEX_INIT)