| /** @file |
| @brief IPv6 data handler |
| |
| This is not to be included by the application. |
| */ |
| |
| /* |
| * Copyright (c) 2016 Intel Corporation |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #ifndef __IPV6_H |
| #define __IPV6_H |
| |
| #include <zephyr/types.h> |
| |
| #include <net/net_ip.h> |
| #include <net/net_pkt.h> |
| #include <net/net_if.h> |
| #include <net/net_context.h> |
| |
| #include "icmpv6.h" |
| #include "nbr.h" |
| |
| #define NET_IPV6_ND_HOP_LIMIT 255 |
| #define NET_IPV6_ND_INFINITE_LIFETIME 0xFFFFFFFF |
| |
| #define NET_IPV6_DEFAULT_PREFIX_LEN 64 |
| |
| #define NET_MAX_RS_COUNT 3 |
| |
| /** |
| * @brief Bitmaps for IPv6 extension header processing |
| * |
| * When processing extension headers, we record which one we have seen. |
| * This is done as the network packet cannot have twice the same header, |
| * except for destination option. |
| * This information is stored in bitfield variable. |
| * The order of the bitmap is the order recommended in RFC 2460. |
| */ |
| #define NET_IPV6_EXT_HDR_BITMAP_HBHO 0x01 |
| #define NET_IPV6_EXT_HDR_BITMAP_DESTO1 0x02 |
| #define NET_IPV6_EXT_HDR_BITMAP_ROUTING 0x04 |
| #define NET_IPV6_EXT_HDR_BITMAP_FRAG 0x08 |
| #define NET_IPV6_EXT_HDR_BITMAP_AH 0x10 |
| #define NET_IPV6_EXT_HDR_BITMAP_ESP 0x20 |
| #define NET_IPV6_EXT_HDR_BITMAP_DESTO2 0x40 |
| |
| /** |
| * @brief Destination and Hop By Hop extension headers option types |
| */ |
| #define NET_IPV6_EXT_HDR_OPT_PAD1 0 |
| #define NET_IPV6_EXT_HDR_OPT_PADN 1 |
| #define NET_IPV6_EXT_HDR_OPT_RPL 0x63 |
| |
| /** |
| * @brief Multicast Listener Record v2 record types. |
| */ |
| #define NET_IPV6_MLDv2_MODE_IS_INCLUDE 1 |
| #define NET_IPV6_MLDv2_MODE_IS_EXCLUDE 2 |
| #define NET_IPV6_MLDv2_CHANGE_TO_INCLUDE_MODE 3 |
| #define NET_IPV6_MLDv2_CHANGE_TO_EXCLUDE_MODE 4 |
| #define NET_IPV6_MLDv2_ALLOW_NEW_SOURCES 5 |
| #define NET_IPV6_MLDv2_BLOCK_OLD_SOURCES 6 |
| |
| /* State of the neighbor */ |
| enum net_ipv6_nbr_state { |
| NET_IPV6_NBR_STATE_INCOMPLETE, |
| NET_IPV6_NBR_STATE_REACHABLE, |
| NET_IPV6_NBR_STATE_STALE, |
| NET_IPV6_NBR_STATE_DELAY, |
| NET_IPV6_NBR_STATE_PROBE, |
| NET_IPV6_NBR_STATE_STATIC, |
| }; |
| |
| const char *net_ipv6_nbr_state2str(enum net_ipv6_nbr_state state); |
| |
| /** |
| * @brief IPv6 neighbor information. |
| */ |
| struct net_ipv6_nbr_data { |
| /** Any pending packet waiting ND to finish. */ |
| struct net_pkt *pending; |
| |
| /** IPv6 address. */ |
| struct in6_addr addr; |
| |
| /** Reachable timer. */ |
| struct k_delayed_work reachable; |
| |
| /** Neighbor Solicitation reply timer */ |
| struct k_delayed_work send_ns; |
| |
| /** State of the neighbor discovery */ |
| enum net_ipv6_nbr_state state; |
| |
| /** Link metric for the neighbor */ |
| u16_t link_metric; |
| |
| /** How many times we have sent NS */ |
| u8_t ns_count; |
| |
| /** Is the neighbor a router */ |
| bool is_router; |
| }; |
| |
| static inline struct net_ipv6_nbr_data *net_ipv6_nbr_data(struct net_nbr *nbr) |
| { |
| return (struct net_ipv6_nbr_data *)nbr->data; |
| } |
| |
| /** |
| * @brief Return IPv6 neighbor according to ll index. |
| * |
| * @param idx Neighbor index in link layer table. |
| * |
| * @return Return IPv6 neighbor information. |
| */ |
| struct net_ipv6_nbr_data *net_ipv6_get_nbr_by_index(u8_t idx); |
| |
| #if defined(CONFIG_NET_IPV6_DAD) |
| int net_ipv6_start_dad(struct net_if *iface, struct net_if_addr *ifaddr); |
| #endif |
| |
| int net_ipv6_send_ns(struct net_if *iface, struct net_pkt *pending, |
| struct in6_addr *src, struct in6_addr *dst, |
| struct in6_addr *tgt, bool is_my_address); |
| |
| int net_ipv6_send_rs(struct net_if *iface); |
| int net_ipv6_start_rs(struct net_if *iface); |
| |
| int net_ipv6_send_na(struct net_if *iface, const struct in6_addr *src, |
| const struct in6_addr *dst, const struct in6_addr *tgt, |
| u8_t flags); |
| |
| /** |
| * @brief Create IPv6 packet in provided net_pkt. |
| * |
| * @param pkt Network packet |
| * @param src Source IPv6 address |
| * @param dst Destination IPv6 address |
| * @param iface Network interface |
| * @param next_header Protocol type of the next header after IPv6 header. |
| * |
| * @return Return network packet that contains the IPv6 packet. |
| */ |
| struct net_pkt *net_ipv6_create_raw(struct net_pkt *pkt, |
| const struct in6_addr *src, |
| const struct in6_addr *dst, |
| struct net_if *iface, |
| u8_t next_header); |
| |
| /** |
| * @brief Create IPv6 packet in provided net_pkt. |
| * |
| * @param context Network context for a connection |
| * @param pkt Network packet |
| * @param src_addr Source address, or NULL to choose a default from context |
| * @param dst_addr Destination IPv6 address |
| * |
| * @return Return network packet that contains the IPv6 packet. |
| */ |
| struct net_pkt *net_ipv6_create(struct net_context *context, |
| struct net_pkt *pkt, |
| const struct in6_addr *src_addr, |
| const struct in6_addr *dst_addr); |
| |
| /** |
| * @brief Finalize IPv6 packet. It should be called right before |
| * sending the packet and after all the data has been added into |
| * the packet. This function will set the length of the |
| * packet and calculate the higher protocol checksum if needed. |
| * |
| * @param pkt Network packet |
| * @param next_header Protocol type of the next header after IPv6 header. |
| * |
| * @return Return 0 on Success, < 0 on Failure. |
| */ |
| int net_ipv6_finalize_raw(struct net_pkt *pkt, u8_t next_header); |
| |
| /** |
| * @brief Finalize IPv6 packet. It should be called right before |
| * sending the packet and after all the data has been added into |
| * the packet. This function will set the length of the |
| * packet and calculate the higher protocol checksum if needed. |
| * |
| * @param context Network context for a connection |
| * @param pkt Network packet |
| * |
| * @return Return 0 on Success, < 0 on Failure. |
| */ |
| int net_ipv6_finalize(struct net_context *context, struct net_pkt *pkt); |
| |
| #if defined(CONFIG_NET_IPV6_MLD) |
| /** |
| * @brief Join a given multicast group. |
| * |
| * @param iface Network interface where join message is sent |
| * @param addr Multicast group to join |
| * |
| * @return Return 0 if joining was done, <0 otherwise. |
| */ |
| int net_ipv6_mld_join(struct net_if *iface, const struct in6_addr *addr); |
| |
| /** |
| * @brief Leave a given multicast group. |
| * |
| * @param iface Network interface where leave message is sent |
| * @param addr Multicast group to leave |
| * |
| * @return Return 0 if leaving is done, <0 otherwise. |
| */ |
| int net_ipv6_mld_leave(struct net_if *iface, const struct in6_addr *addr); |
| #else |
| #define net_ipv6_mld_join(...) |
| #define net_ipv6_mld_leave(...) |
| #endif /* CONFIG_NET_IPV6_MLD */ |
| |
| /** |
| * @typedef net_nbr_cb_t |
| * @brief Callback used while iterating over neighbors. |
| * |
| * @param nbr A valid pointer on current neighbor. |
| * @param user_data A valid pointer on some user data or NULL |
| */ |
| typedef void (*net_nbr_cb_t)(struct net_nbr *nbr, void *user_data); |
| |
| #if defined(CONFIG_NET_IPV6_NBR_CACHE) |
| /** |
| * @brief Make sure the link layer address is set according to |
| * destination address. If the ll address is not yet known, then |
| * start neighbor discovery to find it out. If ND needs to be done |
| * then the returned packet is the Neighbor Solicitation message |
| * and the original message is sent after Neighbor Advertisement |
| * message is received. |
| * |
| * @param pkt Network packet |
| * |
| * @return Return network packet to be sent. |
| */ |
| struct net_pkt *net_ipv6_prepare_for_send(struct net_pkt *pkt); |
| |
| /** |
| * @brief Look for a neighbor from it's address on an iface |
| * |
| * @param iface A valid pointer on a network interface |
| * @param addr The IPv6 address to match |
| * |
| * @return A valid pointer on a neighbor on success, NULL otherwise |
| */ |
| struct net_nbr *net_ipv6_nbr_lookup(struct net_if *iface, |
| struct in6_addr *addr); |
| |
| /** |
| * @brief Get neighbor from its index. |
| * |
| * @param iface Network interface to match. If NULL, then use |
| * whatever interface there is configured for the neighbor address. |
| * @param idx Index of the link layer address in the address array |
| * |
| * @return A valid pointer on a neighbor on success, NULL otherwise |
| */ |
| struct net_nbr *net_ipv6_get_nbr(struct net_if *iface, u8_t idx); |
| |
| /** |
| * @brief Look for a neighbor from it's link local address index |
| * |
| * @param iface Network interface to match. If NULL, then use |
| * whatever interface there is configured for the neighbor address. |
| * @param idx Index of the link layer address in the address array |
| * |
| * @return A valid pointer on a neighbor on success, NULL otherwise |
| */ |
| struct in6_addr *net_ipv6_nbr_lookup_by_index(struct net_if *iface, |
| u8_t idx); |
| |
| /** |
| * @brief Add a neighbor to neighbor cache |
| * |
| * Add a neighbor to the cache after performing a lookup and in case |
| * there exists an entry in the cache update its state and lladdr. |
| * |
| * @param iface A valid pointer on a network interface |
| * @param addr Neighbor IPv6 address |
| * @param lladdr Neighbor link layer address |
| * @param is_router Set to true if the neighbor is a router, false |
| * otherwise |
| * @param state Initial state of the neighbor entry in the cache |
| * |
| * @return A valid pointer on a neighbor on success, NULL otherwise |
| */ |
| struct net_nbr *net_ipv6_nbr_add(struct net_if *iface, |
| struct in6_addr *addr, |
| struct net_linkaddr *lladdr, |
| bool is_router, |
| enum net_ipv6_nbr_state state); |
| |
| /** |
| * @brief Remove a neighbor from neighbor cache. |
| * |
| * @param iface A valid pointer on a network interface |
| * @param addr Neighbor IPv6 address |
| * |
| * @return True if neighbor could be removed, False otherwise |
| */ |
| bool net_ipv6_nbr_rm(struct net_if *iface, struct in6_addr *addr); |
| |
| /** |
| * @brief Go through all the neighbors and call callback for each of them. |
| * |
| * @param cb User supplied callback function to call. |
| * @param user_data User specified data. |
| */ |
| void net_ipv6_nbr_foreach(net_nbr_cb_t cb, void *user_data); |
| |
| #else /* CONFIG_NET_IPV6_NBR_CACHE */ |
| static inline struct net_pkt *net_ipv6_prepare_for_send(struct net_pkt *pkt) |
| { |
| return pkt; |
| } |
| |
| static inline struct net_nbr *net_ipv6_nbr_lookup(struct net_if *iface, |
| struct in6_addr *addr) |
| { |
| return NULL; |
| } |
| |
| static inline |
| struct in6_addr *net_ipv6_nbr_lookup_by_index(struct net_if *iface, |
| u8_t idx) |
| { |
| return NULL; |
| } |
| |
| static inline struct net_nbr *net_ipv6_nbr_add(struct net_if *iface, |
| struct in6_addr *addr, |
| struct net_linkaddr *lladdr, |
| bool is_router, |
| enum net_ipv6_nbr_state state) |
| { |
| return NULL; |
| } |
| |
| static inline bool net_ipv6_nbr_rm(struct net_if *iface, struct in6_addr *addr) |
| { |
| return true; |
| } |
| |
| static inline void net_ipv6_nbr_foreach(net_nbr_cb_t cb, void *user_data) |
| { |
| return; |
| } |
| #endif /* CONFIG_NET_IPV6_NBR_CACHE */ |
| |
| #if defined(CONFIG_NET_IPV6_ND) |
| /** |
| * @brief Set the neighbor reachable timer. |
| * |
| * @param iface A valid pointer on a network interface |
| * @param nbr Neighbor struct pointer |
| */ |
| void net_ipv6_nbr_set_reachable_timer(struct net_if *iface, |
| struct net_nbr *nbr); |
| |
| #else /* CONFIG_NET_IPV6_ND */ |
| static inline void net_ipv6_nbr_set_reachable_timer(struct net_if *iface, |
| struct net_nbr *nbr) |
| { |
| } |
| #endif |
| |
| #if defined(CONFIG_NET_IPV6_FRAGMENT) |
| /* We do not have to accept larger than 1500 byte IPv6 packet (RFC 2460 ch 5). |
| * This means that we should receive everything within first two fragments. |
| * The first one being 1280 bytes and the second one 220 bytes. |
| */ |
| #if !defined(NET_IPV6_FRAGMENTS_MAX_PKT) |
| #define NET_IPV6_FRAGMENTS_MAX_PKT 2 |
| #endif |
| |
| /** Store pending IPv6 fragment information that is needed for reassembly. */ |
| struct net_ipv6_reassembly { |
| /** IPv6 source address of the fragment */ |
| struct in6_addr src; |
| |
| /** IPv6 destination address of the fragment */ |
| struct in6_addr dst; |
| |
| /** |
| * Timeout for cancelling the reassembly. The timer is used |
| * also to detect if this reassembly slot is used or not. |
| */ |
| struct k_delayed_work timer; |
| |
| /** Pointers to pending fragments */ |
| struct net_pkt *pkt[NET_IPV6_FRAGMENTS_MAX_PKT]; |
| |
| /** IPv6 fragment identification */ |
| u32_t id; |
| }; |
| |
| /** |
| * @typedef net_ipv6_frag_cb_t |
| * @brief Callback used while iterating over pending IPv6 fragments. |
| * |
| * @param reass IPv6 fragment reassembly struct |
| * @param user_data A valid pointer on some user data or NULL |
| */ |
| typedef void (*net_ipv6_frag_cb_t)(struct net_ipv6_reassembly *reass, |
| void *user_data); |
| |
| /** |
| * @brief Go through all the currently pending IPv6 fragments. |
| * |
| * @param cb Callback to call for each pending IPv6 fragment. |
| * @param user_data User specified data or NULL. |
| */ |
| void net_ipv6_frag_foreach(net_ipv6_frag_cb_t cb, void *user_data); |
| |
| #endif /* CONFIG_NET_IPV6_FRAGMENT */ |
| |
| /** |
| * @brief Find the last IPv6 extension header in the network packet. |
| * |
| * @param pkt Network head packet. |
| * @param next_hdr_idx Where is the index to next header field that points |
| * to last header. This is returned to caller. |
| * @param last_hdr_idx Where is the last header field in the packet. |
| * This is returned to caller. |
| * |
| * @return Return 0 if ok or <0 if the packet is malformed. |
| */ |
| int net_ipv6_find_last_ext_hdr(struct net_pkt *pkt, u16_t *next_hdr_idx, |
| u16_t *last_hdr_idx); |
| |
| #if defined(CONFIG_NET_IPV6) |
| void net_ipv6_init(void); |
| #else |
| #define net_ipv6_init(...) |
| #endif |
| |
| #endif /* __IPV6_H */ |