| /* | 
 |  * Copyright (c) 2017 Intel Corporation | 
 |  * Copyright (c) 2020 Lingao Meng | 
 |  * | 
 |  * SPDX-License-Identifier: Apache-2.0 | 
 |  */ | 
 |  | 
 | #include <zephyr/kernel.h> | 
 | #include <errno.h> | 
 | #include <zephyr/sys/atomic.h> | 
 | #include <zephyr/sys/util.h> | 
 | #include <zephyr/sys/byteorder.h> | 
 |  | 
 | #include <zephyr/net/buf.h> | 
 | #include <zephyr/bluetooth/bluetooth.h> | 
 | #include <zephyr/bluetooth/conn.h> | 
 | #include <zephyr/bluetooth/mesh.h> | 
 | #include <zephyr/bluetooth/uuid.h> | 
 |  | 
 | #include "common/bt_str.h" | 
 |  | 
 | #include "crypto.h" | 
 | #include "mesh.h" | 
 | #include "net.h" | 
 | #include "rpl.h" | 
 | #include "beacon.h" | 
 | #include "access.h" | 
 | #include "foundation.h" | 
 | #include "proxy.h" | 
 | #include "pb_gatt_srv.h" | 
 | #include "prov.h" | 
 | #include "settings.h" | 
 | #include "rpr.h" | 
 |  | 
 | #define LOG_LEVEL CONFIG_BT_MESH_PROVISIONEE_LOG_LEVEL | 
 | #include <zephyr/logging/log.h> | 
 | LOG_MODULE_REGISTER(bt_mesh_provisionee); | 
 |  | 
 | static void reprovision_fail(void); | 
 |  | 
 | static void prov_send_fail_msg(uint8_t err) | 
 | { | 
 | 	PROV_BUF(buf, PDU_LEN_FAILED); | 
 |  | 
 | 	LOG_DBG("%u", err); | 
 |  | 
 | 	bt_mesh_prov_link.expect = PROV_NO_PDU; | 
 |  | 
 | 	bt_mesh_prov_buf_init(&buf, PROV_FAILED); | 
 | 	net_buf_simple_add_u8(&buf, err); | 
 |  | 
 | 	if (bt_mesh_prov_send(&buf, NULL)) { | 
 | 		LOG_ERR("Failed to send Provisioning Failed message"); | 
 | 	} | 
 | } | 
 |  | 
 | static void prov_fail(uint8_t reason) | 
 | { | 
 | 	/* According to MshPRTv1.1: 5.4.4, the provisioner just closes the link when something | 
 | 	 * fails, while the provisionee sends the fail message, and waits for the provisioner to | 
 | 	 * close the link. | 
 | 	 */ | 
 | 	prov_send_fail_msg(reason); | 
 |  | 
 | 	if (IS_ENABLED(CONFIG_BT_MESH_RPR_SRV) && | 
 | 	    atomic_test_bit(bt_mesh_prov_link.flags, REPROVISION)) { | 
 | 		reprovision_fail(); | 
 | 	} | 
 | } | 
 |  | 
 | static void prov_invite(const uint8_t *data) | 
 | { | 
 | 	PROV_BUF(buf, PDU_LEN_CAPABILITIES); | 
 |  | 
 | 	LOG_DBG("Attention Duration: %u seconds", data[0]); | 
 |  | 
 | 	if (data[0]) { | 
 | 		bt_mesh_attention(NULL, data[0]); | 
 | 	} | 
 |  | 
 | 	memcpy(bt_mesh_prov_link.conf_inputs.invite, data, PDU_LEN_INVITE); | 
 |  | 
 | 	bt_mesh_prov_buf_init(&buf, PROV_CAPABILITIES); | 
 |  | 
 | 	/* Number of Elements supported */ | 
 | 	net_buf_simple_add_u8(&buf, bt_mesh_elem_count()); | 
 |  | 
 | 	uint16_t algorithm_bm = 0; | 
 | 	uint8_t oob_type = bt_mesh_prov->static_val ? | 
 | 			BT_MESH_STATIC_OOB_AVAILABLE : 0; | 
 | 	bool oob_availability = bt_mesh_prov->output_size > 0 || | 
 | 			bt_mesh_prov->input_size > 0 || bt_mesh_prov->static_val; | 
 |  | 
 | 	if (IS_ENABLED(CONFIG_BT_MESH_ECDH_P256_HMAC_SHA256_AES_CCM)) { | 
 | 		WRITE_BIT(algorithm_bm, BT_MESH_PROV_AUTH_HMAC_SHA256_AES_CCM, 1); | 
 | 	} | 
 |  | 
 | 	if (IS_ENABLED(CONFIG_BT_MESH_ECDH_P256_CMAC_AES128_AES_CCM)) { | 
 | 		WRITE_BIT(algorithm_bm, BT_MESH_PROV_AUTH_CMAC_AES128_AES_CCM, 1); | 
 | 	} | 
 |  | 
 | 	if (oob_availability && IS_ENABLED(CONFIG_BT_MESH_OOB_AUTH_REQUIRED)) { | 
 | 		oob_type |= BT_MESH_OOB_AUTH_REQUIRED; | 
 | 		WRITE_BIT(algorithm_bm, BT_MESH_PROV_AUTH_CMAC_AES128_AES_CCM, 0); | 
 | 	} | 
 |  | 
 | 	/* Supported algorithms */ | 
 | 	net_buf_simple_add_be16(&buf, algorithm_bm); | 
 |  | 
 | 	/* Public Key Type */ | 
 | 	net_buf_simple_add_u8(&buf, | 
 | 			      bt_mesh_prov->public_key_be == NULL ? PUB_KEY_NO_OOB : PUB_KEY_OOB); | 
 |  | 
 | 	/* Static OOB Type */ | 
 | 	net_buf_simple_add_u8(&buf, oob_type); | 
 |  | 
 | 	/* Output OOB Size */ | 
 | 	net_buf_simple_add_u8(&buf, bt_mesh_prov->output_size); | 
 |  | 
 | 	/* Output OOB Action */ | 
 | 	net_buf_simple_add_be16(&buf, bt_mesh_prov->output_actions); | 
 |  | 
 | 	/* Input OOB Size */ | 
 | 	net_buf_simple_add_u8(&buf, bt_mesh_prov->input_size); | 
 |  | 
 | 	/* Input OOB Action */ | 
 | 	net_buf_simple_add_be16(&buf, bt_mesh_prov->input_actions); | 
 |  | 
 | 	memcpy(bt_mesh_prov_link.conf_inputs.capabilities, &buf.data[1], PDU_LEN_CAPABILITIES); | 
 |  | 
 | 	if (bt_mesh_prov_send(&buf, NULL)) { | 
 | 		LOG_ERR("Failed to send capabilities"); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	bt_mesh_prov_link.expect = PROV_START; | 
 | } | 
 |  | 
 | static void prov_start(const uint8_t *data) | 
 | { | 
 | 	LOG_DBG("Algorithm:   0x%02x", data[0]); | 
 | 	LOG_DBG("Public Key:  0x%02x", data[1]); | 
 | 	LOG_DBG("Auth Method: 0x%02x", data[2]); | 
 | 	LOG_DBG("Auth Action: 0x%02x", data[3]); | 
 | 	LOG_DBG("Auth Size:   0x%02x", data[4]); | 
 |  | 
 | 	if (IS_ENABLED(CONFIG_BT_MESH_ECDH_P256_HMAC_SHA256_AES_CCM) && | 
 | 		data[0] == BT_MESH_PROV_AUTH_HMAC_SHA256_AES_CCM) { | 
 | 		bt_mesh_prov_link.algorithm = data[0]; | 
 | 	} else if (IS_ENABLED(CONFIG_BT_MESH_ECDH_P256_CMAC_AES128_AES_CCM) && | 
 | 		data[0] == BT_MESH_PROV_AUTH_CMAC_AES128_AES_CCM) { | 
 | 		bt_mesh_prov_link.algorithm = data[0]; | 
 | 	} else { | 
 | 		LOG_ERR("Unknown algorithm 0x%02x", data[0]); | 
 | 		prov_fail(PROV_ERR_NVAL_FMT); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	uint8_t auth_size = bt_mesh_prov_auth_size_get(); | 
 |  | 
 | 	if (data[1] > PUB_KEY_OOB || | 
 | 	    (data[1] == PUB_KEY_OOB && | 
 | 	     (!IS_ENABLED(CONFIG_BT_MESH_PROV_OOB_PUBLIC_KEY) || !bt_mesh_prov->public_key_be))) { | 
 | 		LOG_ERR("Invalid public key type: 0x%02x", data[1]); | 
 | 		prov_fail(PROV_ERR_NVAL_FMT); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	atomic_set_bit_to(bt_mesh_prov_link.flags, OOB_PUB_KEY, data[1] == PUB_KEY_OOB); | 
 |  | 
 | 	memcpy(bt_mesh_prov_link.conf_inputs.start, data, PDU_LEN_START); | 
 |  | 
 | 	bt_mesh_prov_link.expect = PROV_PUB_KEY; | 
 | 	bt_mesh_prov_link.oob_method = data[2]; | 
 | 	bt_mesh_prov_link.oob_action = data[3]; | 
 | 	bt_mesh_prov_link.oob_size = data[4]; | 
 |  | 
 | 	if (IS_ENABLED(CONFIG_BT_MESH_OOB_AUTH_REQUIRED) && | 
 | 	    (bt_mesh_prov_link.oob_method == AUTH_METHOD_NO_OOB || | 
 | 	    bt_mesh_prov_link.algorithm == BT_MESH_PROV_AUTH_CMAC_AES128_AES_CCM)) { | 
 | 		prov_fail(PROV_ERR_NVAL_FMT); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	if (bt_mesh_prov_auth(false, data[2], data[3], data[4]) < 0) { | 
 | 		LOG_ERR("Invalid authentication method: 0x%02x; " | 
 | 			"action: 0x%02x; size: 0x%02x", data[2], data[3], data[4]); | 
 | 		prov_fail(PROV_ERR_NVAL_FMT); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	if (atomic_test_bit(bt_mesh_prov_link.flags, OOB_STATIC_KEY)) { | 
 | 		/* Trim the Auth if it is longer than required length */ | 
 | 		memcpy(bt_mesh_prov_link.auth, bt_mesh_prov->static_val, | 
 | 		       bt_mesh_prov->static_val_len > auth_size ? auth_size | 
 | 								: bt_mesh_prov->static_val_len); | 
 |  | 
 | 		/* Padd with zeros if the Auth is shorter the required length*/ | 
 | 		if (bt_mesh_prov->static_val_len < auth_size) { | 
 | 			memset(bt_mesh_prov_link.auth + bt_mesh_prov->static_val_len, 0, | 
 | 			       auth_size - bt_mesh_prov->static_val_len); | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | static void send_confirm(void) | 
 | { | 
 | 	PROV_BUF(cfm, PDU_LEN_CONFIRM); | 
 | 	uint8_t auth_size = bt_mesh_prov_auth_size_get(); | 
 | 	uint8_t *inputs = (uint8_t *)&bt_mesh_prov_link.conf_inputs; | 
 | 	uint8_t conf_key_input[64]; | 
 |  | 
 | 	LOG_DBG("ConfInputs[0]   %s", bt_hex(inputs, 32)); | 
 | 	LOG_DBG("ConfInputs[32]  %s", bt_hex(&inputs[32], 32)); | 
 | 	LOG_DBG("ConfInputs[64]  %s", bt_hex(&inputs[64], 32)); | 
 | 	LOG_DBG("ConfInputs[96]  %s", bt_hex(&inputs[96], 32)); | 
 | 	LOG_DBG("ConfInputs[128] %s", bt_hex(&inputs[128], 17)); | 
 |  | 
 | 	if (bt_mesh_prov_conf_salt(bt_mesh_prov_link.algorithm, inputs, | 
 | 				   bt_mesh_prov_link.conf_salt)) { | 
 | 		LOG_ERR("Unable to generate confirmation salt"); | 
 | 		prov_fail(PROV_ERR_UNEXP_ERR); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	LOG_DBG("ConfirmationSalt: %s", bt_hex(bt_mesh_prov_link.conf_salt, auth_size)); | 
 |  | 
 | 	memcpy(conf_key_input, bt_mesh_prov_link.dhkey, 32); | 
 |  | 
 | 	if (IS_ENABLED(CONFIG_BT_MESH_ECDH_P256_HMAC_SHA256_AES_CCM) && | 
 | 		bt_mesh_prov_link.algorithm == BT_MESH_PROV_AUTH_HMAC_SHA256_AES_CCM) { | 
 | 		memcpy(&conf_key_input[32], bt_mesh_prov_link.auth, 32); | 
 | 		LOG_DBG("AuthValue  %s", bt_hex(bt_mesh_prov_link.auth, 32)); | 
 | 	} | 
 |  | 
 | 	if (bt_mesh_prov_conf_key(bt_mesh_prov_link.algorithm, conf_key_input, | 
 | 			bt_mesh_prov_link.conf_salt, bt_mesh_prov_link.conf_key)) { | 
 | 		LOG_ERR("Unable to generate confirmation key"); | 
 | 		prov_fail(PROV_ERR_UNEXP_ERR); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	LOG_DBG("ConfirmationKey: %s", bt_hex(bt_mesh_prov_link.conf_key, auth_size)); | 
 |  | 
 | 	if (bt_rand(bt_mesh_prov_link.rand, auth_size)) { | 
 | 		LOG_ERR("Unable to generate random number"); | 
 | 		prov_fail(PROV_ERR_UNEXP_ERR); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	LOG_DBG("LocalRandom: %s", bt_hex(bt_mesh_prov_link.rand, auth_size)); | 
 |  | 
 | 	bt_mesh_prov_buf_init(&cfm, PROV_CONFIRM); | 
 |  | 
 | 	if (bt_mesh_prov_conf(bt_mesh_prov_link.algorithm, bt_mesh_prov_link.conf_key, | 
 | 			bt_mesh_prov_link.rand, bt_mesh_prov_link.auth, | 
 | 			net_buf_simple_add(&cfm, auth_size))) { | 
 | 		LOG_ERR("Unable to generate confirmation value"); | 
 | 		prov_fail(PROV_ERR_UNEXP_ERR); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	if (bt_mesh_prov_send(&cfm, NULL)) { | 
 | 		LOG_ERR("Failed to send Provisioning Confirm"); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	bt_mesh_prov_link.expect = PROV_RANDOM; | 
 |  | 
 | } | 
 |  | 
 | static void send_input_complete(void) | 
 | { | 
 | 	PROV_BUF(buf, PDU_LEN_INPUT_COMPLETE); | 
 |  | 
 | 	bt_mesh_prov_buf_init(&buf, PROV_INPUT_COMPLETE); | 
 | 	if (bt_mesh_prov_send(&buf, NULL)) { | 
 | 		LOG_ERR("Failed to send Provisioning Input Complete"); | 
 | 	} | 
 | 	bt_mesh_prov_link.expect = PROV_CONFIRM; | 
 | } | 
 |  | 
 | static void public_key_sent(int err, void *cb_data) | 
 | { | 
 | 	atomic_set_bit(bt_mesh_prov_link.flags, PUB_KEY_SENT); | 
 |  | 
 | 	if (atomic_test_bit(bt_mesh_prov_link.flags, INPUT_COMPLETE)) { | 
 | 		send_input_complete(); | 
 | 		return; | 
 | 	} | 
 | } | 
 |  | 
 | static void start_auth(void) | 
 | { | 
 | 	if (atomic_test_bit(bt_mesh_prov_link.flags, WAIT_NUMBER) || | 
 | 	    atomic_test_bit(bt_mesh_prov_link.flags, WAIT_STRING)) { | 
 | 		bt_mesh_prov_link.expect = PROV_NO_PDU; /* Wait for input */ | 
 | 	} else { | 
 | 		bt_mesh_prov_link.expect = PROV_CONFIRM; | 
 | 	} | 
 | } | 
 |  | 
 | static void send_pub_key(void) | 
 | { | 
 | 	PROV_BUF(buf, PDU_LEN_PUB_KEY); | 
 | 	const uint8_t *key; | 
 |  | 
 | 	key = bt_mesh_pub_key_get(); | 
 | 	if (!key) { | 
 | 		LOG_ERR("No public key available"); | 
 | 		prov_fail(PROV_ERR_UNEXP_ERR); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	bt_mesh_prov_buf_init(&buf, PROV_PUB_KEY); | 
 | 	net_buf_simple_add_mem(&buf, key, PUB_KEY_SIZE); | 
 | 	LOG_DBG("Local Public Key: %s", bt_hex(buf.data + 1, PUB_KEY_SIZE)); | 
 |  | 
 | 	/* PublicKeyDevice */ | 
 | 	memcpy(bt_mesh_prov_link.conf_inputs.pub_key_device, &buf.data[1], PDU_LEN_PUB_KEY); | 
 |  | 
 | 	if (bt_mesh_prov_send(&buf, public_key_sent)) { | 
 | 		LOG_ERR("Failed to send Public Key"); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	start_auth(); | 
 | } | 
 |  | 
 | static void prov_dh_key_gen(void) | 
 | { | 
 | 	const uint8_t *remote_pub_key; | 
 | 	const uint8_t *remote_priv_key; | 
 |  | 
 | 	remote_pub_key = bt_mesh_prov_link.conf_inputs.pub_key_provisioner; | 
 |  | 
 | 	if (IS_ENABLED(CONFIG_BT_MESH_PROV_OOB_PUBLIC_KEY) && | 
 | 	    atomic_test_bit(bt_mesh_prov_link.flags, OOB_PUB_KEY)) { | 
 | 		remote_priv_key = bt_mesh_prov->private_key_be; | 
 | 	} else { | 
 | 		remote_priv_key = NULL; | 
 | 	} | 
 |  | 
 | 	if (bt_mesh_dhkey_gen(remote_pub_key, remote_priv_key, bt_mesh_prov_link.dhkey)) { | 
 | 		LOG_ERR("Failed to generate DHKey"); | 
 | 		prov_fail(PROV_ERR_UNEXP_ERR); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	LOG_DBG("DHkey: %s", bt_hex(bt_mesh_prov_link.dhkey, DH_KEY_SIZE)); | 
 |  | 
 | 	if (atomic_test_bit(bt_mesh_prov_link.flags, OOB_PUB_KEY)) { | 
 | 		start_auth(); | 
 | 	} else { | 
 | 		send_pub_key(); | 
 | 	} | 
 | } | 
 |  | 
 | static void prov_dh_key_gen_handler(struct k_work *work) | 
 | { | 
 | 	prov_dh_key_gen(); | 
 | } | 
 |  | 
 | static K_WORK_DEFINE(dh_gen_work, prov_dh_key_gen_handler); | 
 |  | 
 | static void prov_pub_key(const uint8_t *data) | 
 | { | 
 | 	LOG_DBG("Remote Public Key: %s", bt_hex(data, PUB_KEY_SIZE)); | 
 |  | 
 | 	/* PublicKeyProvisioner */ | 
 | 	memcpy(bt_mesh_prov_link.conf_inputs.pub_key_provisioner, data, PDU_LEN_PUB_KEY); | 
 |  | 
 | 	if (IS_ENABLED(CONFIG_BT_MESH_PROV_OOB_PUBLIC_KEY) && | 
 | 	    atomic_test_bit(bt_mesh_prov_link.flags, OOB_PUB_KEY)) { | 
 | 		if (!bt_mesh_prov->public_key_be || !bt_mesh_prov->private_key_be) { | 
 | 			LOG_ERR("Public or private key is not ready"); | 
 | 			prov_fail(PROV_ERR_UNEXP_ERR); | 
 | 			return; | 
 | 		} | 
 |  | 
 | 		if (!memcmp(bt_mesh_prov->public_key_be, | 
 | 			    bt_mesh_prov_link.conf_inputs.pub_key_provisioner, PDU_LEN_PUB_KEY)) { | 
 | 			LOG_ERR("Public keys are identical"); | 
 | 			prov_fail(PROV_ERR_NVAL_FMT); | 
 | 			return; | 
 | 		} | 
 |  | 
 | 		/* No swap needed since user provides public key in big-endian */ | 
 | 		memcpy(bt_mesh_prov_link.conf_inputs.pub_key_device, bt_mesh_prov->public_key_be, | 
 | 		       PDU_LEN_PUB_KEY); | 
 | 	} | 
 |  | 
 | 	k_work_submit(&dh_gen_work); | 
 | } | 
 |  | 
 | static void notify_input_complete(void) | 
 | { | 
 | 	if (atomic_test_and_clear_bit(bt_mesh_prov_link.flags, | 
 | 				      NOTIFY_INPUT_COMPLETE) && | 
 | 	    bt_mesh_prov->input_complete) { | 
 | 		bt_mesh_prov->input_complete(); | 
 | 	} | 
 | } | 
 |  | 
 | static void send_random(void) | 
 | { | 
 | 	PROV_BUF(rnd, PDU_LEN_RANDOM); | 
 |  | 
 | 	bt_mesh_prov_buf_init(&rnd, PROV_RANDOM); | 
 | 	net_buf_simple_add_mem(&rnd, bt_mesh_prov_link.rand, bt_mesh_prov_auth_size_get()); | 
 |  | 
 | 	if (bt_mesh_prov_send(&rnd, NULL)) { | 
 | 		LOG_ERR("Failed to send Provisioning Random"); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	bt_mesh_prov_link.expect = PROV_DATA; | 
 | } | 
 |  | 
 | static void prov_random(const uint8_t *data) | 
 | { | 
 | 	uint8_t rand_size = bt_mesh_prov_auth_size_get(); | 
 | 	uint8_t conf_verify[PROV_AUTH_MAX_LEN]; | 
 |  | 
 | 	LOG_DBG("Remote Random: %s", bt_hex(data, rand_size)); | 
 | 	if (!memcmp(data, bt_mesh_prov_link.rand, rand_size)) { | 
 | 		LOG_ERR("Random value is identical to ours, rejecting."); | 
 | 		prov_fail(PROV_ERR_CFM_FAILED); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	if (bt_mesh_prov_conf(bt_mesh_prov_link.algorithm, bt_mesh_prov_link.conf_key, | 
 | 		data, bt_mesh_prov_link.auth, conf_verify)) { | 
 | 		LOG_ERR("Unable to calculate confirmation verification"); | 
 | 		prov_fail(PROV_ERR_UNEXP_ERR); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	if (memcmp(conf_verify, bt_mesh_prov_link.conf, rand_size)) { | 
 | 		LOG_ERR("Invalid confirmation value"); | 
 | 		LOG_DBG("Received:   %s", bt_hex(bt_mesh_prov_link.conf, rand_size)); | 
 | 		LOG_DBG("Calculated: %s",  bt_hex(conf_verify, rand_size)); | 
 | 		prov_fail(PROV_ERR_CFM_FAILED); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	if (bt_mesh_prov_salt(bt_mesh_prov_link.algorithm, bt_mesh_prov_link.conf_salt, | 
 | 		data, bt_mesh_prov_link.rand, bt_mesh_prov_link.prov_salt)) { | 
 | 		LOG_ERR("Failed to generate provisioning salt"); | 
 | 		prov_fail(PROV_ERR_UNEXP_ERR); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	LOG_DBG("ProvisioningSalt: %s", bt_hex(bt_mesh_prov_link.prov_salt, 16)); | 
 |  | 
 | 	send_random(); | 
 | } | 
 |  | 
 | static void prov_confirm(const uint8_t *data) | 
 | { | 
 | 	uint8_t conf_size = bt_mesh_prov_auth_size_get(); | 
 |  | 
 | 	LOG_DBG("Remote Confirm: %s", bt_hex(data, conf_size)); | 
 |  | 
 | 	memcpy(bt_mesh_prov_link.conf, data, conf_size); | 
 | 	notify_input_complete(); | 
 |  | 
 | 	send_confirm(); | 
 | } | 
 |  | 
 | static inline bool is_pb_gatt(void) | 
 | { | 
 | 	return bt_mesh_prov_link.bearer && | 
 | 	       bt_mesh_prov_link.bearer->type == BT_MESH_PROV_GATT; | 
 | } | 
 |  | 
 | static bool refresh_is_valid(const uint8_t *netkey, uint16_t net_idx, | 
 | 			     uint32_t iv_index) | 
 | { | 
 | 	enum bt_mesh_rpr_node_refresh proc = bt_mesh_node_refresh_get(); | 
 | 	struct bt_mesh_subnet *sub = bt_mesh_subnet_get(net_idx); | 
 | 	uint16_t old_addr = bt_mesh_primary_addr(); | 
 | 	bool valid_addr; | 
 |  | 
 | 	if (iv_index != bt_mesh.iv_index) { | 
 | 		LOG_ERR("Invalid IV index"); | 
 | 		return false; | 
 | 	} | 
 |  | 
 | 	if (!sub || bt_mesh_key_compare(netkey, &sub->keys[SUBNET_KEY_TX_IDX(sub)].net)) { | 
 | 		LOG_ERR("Invalid netkey"); | 
 | 		return false; | 
 | 	} | 
 |  | 
 | 	if (proc == BT_MESH_RPR_NODE_REFRESH_ADDR) { | 
 | 		valid_addr = bt_mesh_prov_link.addr < old_addr || | 
 | 		       bt_mesh_prov_link.addr >= old_addr + bt_mesh_comp_get()->elem_count; | 
 | 	} else { | 
 | 		valid_addr = bt_mesh_prov_link.addr == bt_mesh_primary_addr(); | 
 | 	} | 
 |  | 
 | 	if (!valid_addr) { | 
 | 		LOG_ERR("Invalid address"); | 
 | 	} | 
 |  | 
 | 	return valid_addr; | 
 | } | 
 |  | 
 | static void prov_data(const uint8_t *data) | 
 | { | 
 | 	PROV_BUF(msg, PDU_LEN_COMPLETE); | 
 | 	struct bt_mesh_key session_key; | 
 | 	uint8_t nonce[13]; | 
 | 	uint8_t dev_key[16]; | 
 | 	uint8_t pdu[25]; | 
 | 	uint8_t flags; | 
 | 	uint32_t iv_index; | 
 | 	uint16_t net_idx; | 
 | 	int err; | 
 | 	bool identity_enable; | 
 |  | 
 | 	LOG_DBG(""); | 
 |  | 
 | 	err = bt_mesh_session_key(bt_mesh_prov_link.dhkey, | 
 | 				  bt_mesh_prov_link.prov_salt, &session_key); | 
 | 	if (err) { | 
 | 		LOG_ERR("Unable to generate session key"); | 
 | 		prov_fail(PROV_ERR_UNEXP_ERR); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	err = bt_mesh_prov_nonce(bt_mesh_prov_link.dhkey, | 
 | 				 bt_mesh_prov_link.prov_salt, nonce); | 
 | 	if (err) { | 
 | 		LOG_ERR("Unable to generate session nonce"); | 
 | 		prov_fail(PROV_ERR_UNEXP_ERR); | 
 | 		goto session_key_destructor; | 
 | 	} | 
 |  | 
 | 	LOG_DBG("Nonce: %s", bt_hex(nonce, 13)); | 
 |  | 
 | 	err = bt_mesh_prov_decrypt(&session_key, nonce, data, pdu); | 
 | 	if (err) { | 
 | 		LOG_ERR("Unable to decrypt provisioning data"); | 
 | 		prov_fail(PROV_ERR_DECRYPT); | 
 | 		goto session_key_destructor; | 
 | 	} | 
 |  | 
 | 	err = bt_mesh_dev_key(bt_mesh_prov_link.dhkey, | 
 | 			      bt_mesh_prov_link.prov_salt, dev_key); | 
 | 	if (err) { | 
 | 		LOG_ERR("Unable to generate device key"); | 
 | 		prov_fail(PROV_ERR_UNEXP_ERR); | 
 | 		goto session_key_destructor; | 
 | 	} | 
 |  | 
 | 	net_idx = sys_get_be16(&pdu[16]); | 
 | 	flags = pdu[18]; | 
 | 	iv_index = sys_get_be32(&pdu[19]); | 
 | 	bt_mesh_prov_link.addr = sys_get_be16(&pdu[23]); | 
 |  | 
 | 	if (IS_ENABLED(CONFIG_BT_MESH_RPR_SRV) && | 
 | 	    atomic_test_bit(bt_mesh_prov_link.flags, REPROVISION) && | 
 | 	    !refresh_is_valid(pdu, net_idx, iv_index)) { | 
 | 		prov_send_fail_msg(PROV_ERR_INVALID_DATA); | 
 | 		goto session_key_destructor; | 
 | 	} | 
 |  | 
 | 	LOG_DBG("net_idx %u iv_index 0x%08x, addr 0x%04x", | 
 | 		net_idx, iv_index, bt_mesh_prov_link.addr); | 
 |  | 
 | 	bt_mesh_prov_buf_init(&msg, PROV_COMPLETE); | 
 | 	if (bt_mesh_prov_send(&msg, NULL)) { | 
 | 		LOG_ERR("Failed to send Provisioning Complete"); | 
 | 		goto session_key_destructor; | 
 | 	} | 
 |  | 
 | 	/* Ignore any further PDUs on this link */ | 
 | 	bt_mesh_prov_link.expect = PROV_NO_PDU; | 
 | 	atomic_set_bit(bt_mesh_prov_link.flags, COMPLETE); | 
 |  | 
 | 	if (IS_ENABLED(CONFIG_BT_MESH_RPR_SRV) && | 
 | 	    atomic_test_bit(bt_mesh_prov_link.flags, REPROVISION)) { | 
 | 		bt_mesh_dev_key_cand(dev_key); | 
 | 		goto session_key_destructor; | 
 | 	} | 
 |  | 
 | 	/* Store info, since bt_mesh_provision() will end up clearing it */ | 
 | 	if (IS_ENABLED(CONFIG_BT_MESH_GATT_PROXY)) { | 
 | 		identity_enable = is_pb_gatt(); | 
 | 	} else { | 
 | 		identity_enable = false; | 
 | 	} | 
 |  | 
 | 	err = bt_mesh_provision(pdu, net_idx, flags, iv_index, bt_mesh_prov_link.addr, dev_key); | 
 | 	if (err) { | 
 | 		LOG_ERR("Failed to provision (err %d)", err); | 
 | 		goto session_key_destructor; | 
 | 	} | 
 |  | 
 | 	/* After PB-GATT provisioning we should start advertising | 
 | 	 * using Node Identity. | 
 | 	 */ | 
 | 	if (IS_ENABLED(CONFIG_BT_MESH_GATT_PROXY) && identity_enable) { | 
 | 		bt_mesh_proxy_identity_enable(); | 
 | 	} | 
 |  | 
 | session_key_destructor: | 
 | 	bt_mesh_key_destroy(&session_key); | 
 | } | 
 |  | 
 | static void reprovision_complete(void) | 
 | { | 
 | 	bt_mesh_reprovision(bt_mesh_prov_link.addr); | 
 |  | 
 | 	/* When performing the refresh composition procedure, | 
 | 	 * the device key will be activated after the first | 
 | 	 * successful decryption with the new key. | 
 | 	 */ | 
 | 	if (bt_mesh_node_refresh_get() == BT_MESH_RPR_NODE_REFRESH_ADDR) { | 
 | 		bt_mesh_dev_key_cand_activate(); | 
 | 	} | 
 |  | 
 | 	if (bt_mesh_prov->reprovisioned) { | 
 | 		bt_mesh_prov->reprovisioned(bt_mesh_primary_addr()); | 
 | 	} | 
 | } | 
 |  | 
 | static void reprovision_fail(void) | 
 | { | 
 | 	bt_mesh_dev_key_cand_remove(); | 
 | } | 
 |  | 
 | static void local_input_complete(void) | 
 | { | 
 | 	if (atomic_test_bit(bt_mesh_prov_link.flags, PUB_KEY_SENT) || | 
 | 	    atomic_test_bit(bt_mesh_prov_link.flags, OOB_PUB_KEY)) { | 
 | 		send_input_complete(); | 
 | 	} else { | 
 | 		atomic_set_bit(bt_mesh_prov_link.flags, INPUT_COMPLETE); | 
 | 	} | 
 | } | 
 |  | 
 | static void prov_link_closed(enum prov_bearer_link_status status) | 
 | { | 
 | 	if (IS_ENABLED(CONFIG_BT_MESH_RPR_SRV) && | 
 | 	    atomic_test_bit(bt_mesh_prov_link.flags, REPROVISION)) { | 
 | 		if (atomic_test_bit(bt_mesh_prov_link.flags, COMPLETE) && | 
 | 		    status == PROV_BEARER_LINK_STATUS_SUCCESS) { | 
 | 			reprovision_complete(); | 
 | 		} else { | 
 | 			reprovision_fail(); | 
 | 		} | 
 | 	} else if (bt_mesh_prov_link.conf_inputs.invite[0]) { | 
 | 		/* Disable Attention Timer if it was set */ | 
 | 		bt_mesh_attention(NULL, 0); | 
 | 	} | 
 |  | 
 | 	bt_mesh_prov_reset_state(); | 
 | } | 
 |  | 
 | static void prov_link_opened(void) | 
 | { | 
 | 	bt_mesh_prov_link.expect = PROV_INVITE; | 
 | 	if (IS_ENABLED(CONFIG_BT_MESH_RPR_SRV) && bt_mesh_is_provisioned()) { | 
 | 		atomic_set_bit(bt_mesh_prov_link.flags, REPROVISION); | 
 | 	} | 
 | } | 
 |  | 
 | static const struct bt_mesh_prov_role role_device = { | 
 | 	.input_complete = local_input_complete, | 
 | 	.link_opened = prov_link_opened, | 
 | 	.link_closed = prov_link_closed, | 
 | 	.error = prov_fail, | 
 | 	.op = { | 
 | 		[PROV_INVITE] = prov_invite, | 
 | 		[PROV_START] = prov_start, | 
 | 		[PROV_PUB_KEY] = prov_pub_key, | 
 | 		[PROV_CONFIRM] = prov_confirm, | 
 | 		[PROV_RANDOM] = prov_random, | 
 | 		[PROV_DATA] = prov_data, | 
 | 	}, | 
 | }; | 
 |  | 
 | int bt_mesh_prov_enable(bt_mesh_prov_bearer_t bearers) | 
 | { | 
 | 	if (IS_ENABLED(CONFIG_BT_MESH_RPR_SRV) && | 
 | 	    (bearers & BT_MESH_PROV_REMOTE)) { | 
 | 		pb_remote_srv.link_accept(bt_mesh_prov_bearer_cb_get(), NULL); | 
 |  | 
 | 		/* Only PB-Remote supports reprovisioning */ | 
 | 		if (bt_mesh_is_provisioned()) { | 
 | 			goto role_init; | 
 | 		} | 
 | 	} else if (bt_mesh_is_provisioned()) { | 
 | 		return -EALREADY; | 
 | 	} | 
 |  | 
 | #if defined(CONFIG_BT_MESH_PROVISIONEE_LOG_LEVEL) | 
 | 	if (CONFIG_BT_MESH_PROVISIONEE_LOG_LEVEL > 2) { | 
 | 		struct bt_uuid_128 uuid = { .uuid = { BT_UUID_TYPE_128 } }; | 
 |  | 
 | 		sys_memcpy_swap(uuid.val, bt_mesh_prov->uuid, 16); | 
 | 		LOG_INF("Device UUID: %s", bt_uuid_str(&uuid.uuid)); | 
 | 	} | 
 | #endif | 
 |  | 
 | 	if (IS_ENABLED(CONFIG_BT_MESH_PB_ADV) && | 
 | 	    (bearers & BT_MESH_PROV_ADV)) { | 
 | 		bt_mesh_pb_adv.link_accept(bt_mesh_prov_bearer_cb_get(), NULL); | 
 | 	} | 
 |  | 
 | 	if (IS_ENABLED(CONFIG_BT_MESH_PB_GATT) && | 
 | 	    (bearers & BT_MESH_PROV_GATT)) { | 
 | 		bt_mesh_pb_gatt.link_accept(bt_mesh_prov_bearer_cb_get(), NULL); | 
 | 	} | 
 |  | 
 | role_init: | 
 | 	bt_mesh_prov_link.role = &role_device; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | int bt_mesh_prov_disable(bt_mesh_prov_bearer_t bearers) | 
 | { | 
 | 	if (bt_mesh_is_provisioned()) { | 
 | 		return -EALREADY; | 
 | 	} | 
 |  | 
 | 	if (bt_mesh_prov_active()) { | 
 | 		return -EBUSY; | 
 | 	} | 
 |  | 
 | 	if (IS_ENABLED(CONFIG_BT_MESH_PB_ADV) && | 
 | 	    (bearers & BT_MESH_PROV_ADV)) { | 
 | 		bt_mesh_beacon_disable(); | 
 | 		bt_mesh_scan_disable(); | 
 | 	} | 
 |  | 
 | 	if (IS_ENABLED(CONFIG_BT_MESH_PB_GATT) && | 
 | 	    (bearers & BT_MESH_PROV_GATT)) { | 
 | 		(void)bt_mesh_pb_gatt_srv_disable(); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } |