| /* |
| * Copyright (c) 2015, Freescale Semiconductor, Inc. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * |
| * o Redistributions of source code must retain the above copyright notice, this |
| * list of conditions and the following disclaimer. |
| * |
| * o Redistributions in binary form must reproduce the above copyright notice, |
| * this list of conditions and the following disclaimer in the documentation |
| * and/or other materials provided with the distribution. |
| * |
| * o Neither the name of Freescale Semiconductor, Inc. nor the names of its |
| * contributors may be used to endorse or promote products derived from this |
| * software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include "clock_freq.h" |
| #include "ccm_imx7d.h" |
| #include "ccm_analog_imx7d.h" |
| |
| /*FUNCTION********************************************************************** |
| * |
| * Function Name : get_gpt_clock_freq |
| * Description : Get clock frequency applies to the GPT module |
| * |
| *END**************************************************************************/ |
| uint32_t get_gpt_clock_freq(GPT_Type *base) |
| { |
| uint32_t root; |
| uint32_t hz; |
| uint32_t pre, post; |
| |
| switch ((uint32_t)base) { |
| case GPT3_BASE: |
| root = CCM_GetRootMux(CCM, ccmRootGpt3); |
| CCM_GetRootDivider(CCM, ccmRootGpt3, &pre, &post); |
| break; |
| case GPT4_BASE: |
| root = CCM_GetRootMux(CCM, ccmRootGpt4); |
| CCM_GetRootDivider(CCM, ccmRootGpt4, &pre, &post); |
| break; |
| default: |
| return 0; |
| } |
| |
| switch (root) { |
| case ccmRootmuxGptOsc24m: |
| hz = 24000000; |
| break; |
| case ccmRootmuxGptSysPllPfd0: |
| hz = CCM_ANALOG_GetPfdFreq(CCM_ANALOG, ccmAnalogPfd0Frac); |
| break; |
| default: |
| return 0; |
| } |
| |
| return hz / (pre + 1) / (post + 1); |
| } |
| |
| /*FUNCTION********************************************************************** |
| * |
| * Function Name : get_ecspi_clock_freq |
| * Description : Get clock frequency applys to the ECSPI module |
| * |
| *END**************************************************************************/ |
| uint32_t get_ecspi_clock_freq(ECSPI_Type *base) |
| { |
| uint32_t root; |
| uint32_t hz; |
| uint32_t pre, post; |
| |
| switch ((uint32_t)base) { |
| case ECSPI1_BASE: |
| root = CCM_GetRootMux(CCM, ccmRootEcspi1); |
| CCM_GetRootDivider(CCM, ccmRootEcspi1, &pre, &post); |
| break; |
| case ECSPI2_BASE: |
| root = CCM_GetRootMux(CCM, ccmRootEcspi2); |
| CCM_GetRootDivider(CCM, ccmRootEcspi2, &pre, &post); |
| break; |
| default: |
| return 0; |
| } |
| |
| switch (root) { |
| case ccmRootmuxEcspiOsc24m: |
| hz = 24000000; |
| break; |
| case ccmRootmuxEcspiSysPllPfd4: |
| hz = CCM_ANALOG_GetPfdFreq(CCM_ANALOG, ccmAnalogPfd4Frac); |
| break; |
| default: |
| return 0; |
| } |
| |
| return hz / (pre + 1) / (post + 1); |
| } |
| |
| /*FUNCTION********************************************************************** |
| * |
| * Function Name : get_flexcan_clock_freq |
| * Description : Get clock frequency applys to the FLEXCAN module |
| * |
| *END**************************************************************************/ |
| uint32_t get_flexcan_clock_freq(CAN_Type *base) |
| { |
| uint32_t root; |
| uint32_t hz; |
| uint32_t pre, post; |
| |
| switch ((uint32_t)base) { |
| case CAN1_BASE: |
| root = CCM_GetRootMux(CCM, ccmRootCan1); |
| CCM_GetRootDivider(CCM, ccmRootCan1, &pre, &post); |
| break; |
| case CAN2_BASE: |
| root = CCM_GetRootMux(CCM, ccmRootCan2); |
| CCM_GetRootDivider(CCM, ccmRootCan2, &pre, &post); |
| break; |
| default: |
| return 0; |
| } |
| |
| switch (root) { |
| case ccmRootmuxCanOsc24m: |
| hz = 24000000; |
| break; |
| case ccmRootmuxCanSysPllDiv4: |
| hz = CCM_ANALOG_GetSysPllFreq(CCM_ANALOG) >> 2; |
| break; |
| case ccmRootmuxCanSysPllDiv1: |
| hz = CCM_ANALOG_GetSysPllFreq(CCM_ANALOG); |
| break; |
| default: |
| return 0; |
| } |
| |
| return hz / (pre + 1) / (post + 1); |
| } |
| |
| /*FUNCTION********************************************************************** |
| * |
| * Function Name : get_I2C_clock_freq |
| * Description : Get clock frequency applys to the I2C module |
| * |
| *END**************************************************************************/ |
| uint32_t get_i2c_clock_freq(I2C_Type *base) |
| { |
| uint32_t root; |
| uint32_t hz; |
| uint32_t pre, post; |
| |
| switch ((uint32_t)base) { |
| case I2C1_BASE: |
| root = CCM_GetRootMux(CCM, ccmRootI2c1); |
| CCM_GetRootDivider(CCM, ccmRootI2c1, &pre, &post); |
| break; |
| case I2C2_BASE: |
| root = CCM_GetRootMux(CCM, ccmRootI2c2); |
| CCM_GetRootDivider(CCM, ccmRootI2c2, &pre, &post); |
| break; |
| case I2C3_BASE: |
| root = CCM_GetRootMux(CCM, ccmRootI2c3); |
| CCM_GetRootDivider(CCM, ccmRootI2c3, &pre, &post); |
| break; |
| case I2C4_BASE: |
| root = CCM_GetRootMux(CCM, ccmRootI2c4); |
| CCM_GetRootDivider(CCM, ccmRootI2c4, &pre, &post); |
| break; |
| default: |
| return 0; |
| } |
| |
| switch (root) { |
| case ccmRootmuxI2cOsc24m: |
| hz = 24000000; |
| break; |
| case ccmRootmuxI2cSysPllDiv4: |
| hz = CCM_ANALOG_GetSysPllFreq(CCM_ANALOG) >> 2; |
| break; |
| default: |
| return 0; |
| } |
| |
| return hz / (pre + 1) / (post + 1); |
| } |
| |
| /*FUNCTION********************************************************************** |
| * |
| * Function Name : get_uart_clock_freq |
| * Description : Get clock frequency applys to the UART module |
| * |
| *END**************************************************************************/ |
| uint32_t get_uart_clock_freq(UART_Type *base) |
| { |
| uint32_t root; |
| uint32_t hz; |
| uint32_t pre, post; |
| |
| switch ((uint32_t)base) { |
| case UART1_BASE: |
| root = CCM_GetRootMux(CCM, ccmRootUart1); |
| CCM_GetRootDivider(CCM, ccmRootUart1, &pre, &post); |
| break; |
| case UART2_BASE: |
| root = CCM_GetRootMux(CCM, ccmRootUart2); |
| CCM_GetRootDivider(CCM, ccmRootUart2, &pre, &post); |
| break; |
| case UART3_BASE: |
| root = CCM_GetRootMux(CCM, ccmRootUart3); |
| CCM_GetRootDivider(CCM, ccmRootUart3, &pre, &post); |
| break; |
| case UART4_BASE: |
| root = CCM_GetRootMux(CCM, ccmRootUart4); |
| CCM_GetRootDivider(CCM, ccmRootUart4, &pre, &post); |
| break; |
| case UART5_BASE: |
| root = CCM_GetRootMux(CCM, ccmRootUart5); |
| CCM_GetRootDivider(CCM, ccmRootUart5, &pre, &post); |
| break; |
| case UART6_BASE: |
| root = CCM_GetRootMux(CCM, ccmRootUart6); |
| CCM_GetRootDivider(CCM, ccmRootUart6, &pre, &post); |
| break; |
| case UART7_BASE: |
| root = CCM_GetRootMux(CCM, ccmRootUart7); |
| CCM_GetRootDivider(CCM, ccmRootUart7, &pre, &post); |
| break; |
| default: |
| return 0; |
| } |
| |
| switch (root) { |
| case ccmRootmuxUartOsc24m: |
| hz = 24000000; |
| break; |
| case ccmRootmuxUartSysPllDiv2: |
| hz = CCM_ANALOG_GetSysPllFreq(CCM_ANALOG) >> 1; |
| break; |
| case ccmRootmuxUartSysPllDiv1: |
| hz = CCM_ANALOG_GetSysPllFreq(CCM_ANALOG); |
| break; |
| default: |
| return 0; |
| } |
| |
| return hz / (pre + 1) / (post + 1); |
| } |
| |
| /******************************************************************************* |
| * EOF |
| ******************************************************************************/ |