| # Modem configuration options |
| |
| # Copyright (c) 2018 Foundries.io |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| menuconfig MODEM |
| bool "Modem Drivers" |
| help |
| Enable config options for modem drivers. |
| |
| if MODEM |
| |
| module = MODEM |
| module-str = modem |
| source "subsys/logging/Kconfig.template.log_config" |
| |
| config MODEM_RECEIVER |
| bool "Modem receiver helper driver" |
| depends on SERIAL_SUPPORT_INTERRUPT |
| select UART_INTERRUPT_DRIVEN |
| select RING_BUFFER |
| help |
| This driver allows modem drivers to communicate over UART with custom |
| defined protocols. Driver doesn't inspect received data and all |
| aspects of received protocol data are handled by application via |
| work method provided. This driver differs from the pipe UART driver |
| in that callbacks are executed in a different work queue and data is |
| passed around in k_pipe structures. |
| |
| config MODEM_RECEIVER_MAX_CONTEXTS |
| int "Maximum number of modem receiver contexts" |
| depends on MODEM_RECEIVER |
| range 1 10 |
| default 1 |
| help |
| Maximum number of modem receiver contexts to handle. For most |
| purposes this should stay at 1. |
| |
| config MODEM_CONTEXT |
| bool "Modem context helper driver [EXPERIMENTAL]" |
| select EXPERIMENTAL |
| help |
| This driver allows modem drivers to communicate with an interface |
| using custom defined protocols. Driver doesn't inspect received data |
| and all aspects of received protocol data are handled by application |
| work method provided. This driver combines abstractions for: |
| modem interface, command handler, pin config and socket handling each |
| of which will need to be configured. |
| |
| if MODEM_CONTEXT |
| |
| config MODEM_CONTEXT_MAX_NUM |
| int "Maximum number of modem contexts" |
| default 1 |
| help |
| Maximum number of modem contexts to handle. For most |
| purposes this should stay at 1. |
| |
| config MODEM_CONTEXT_VERBOSE_DEBUG |
| bool "Verbose debug output in the modem context" |
| help |
| Enabling this setting will turn on VERY heavy debugging from the |
| modem context helper. Do NOT leave on for production. |
| |
| config MODEM_IFACE_UART |
| bool "UART-based modem interface" |
| select RING_BUFFER |
| help |
| To configure this layer for use, create a modem_iface_uart_data |
| object and pass it's reference to modem_iface_uart_init() |
| along with the modem_iface reference from your modem_context object |
| and the UART device name. |
| |
| if MODEM_IFACE_UART |
| |
| choice MODEM_IFACE_UART_BACKEND |
| prompt "UART backend to use for modem interface" |
| default MODEM_IFACE_UART_INTERRUPT |
| |
| config MODEM_IFACE_UART_INTERRUPT |
| bool "UART-based modem interface using interrupt API" |
| depends on SERIAL_SUPPORT_INTERRUPT |
| select UART_INTERRUPT_DRIVEN |
| |
| config MODEM_IFACE_UART_ASYNC |
| bool "UART-based modem interface using async API" |
| depends on SERIAL_SUPPORT_ASYNC |
| select UART_ASYNC_API |
| |
| endchoice |
| |
| if MODEM_IFACE_UART_ASYNC |
| |
| config MODEM_IFACE_UART_ASYNC_RX_BUFFER_SIZE |
| int "Size in bytes of the RX buffers provided to UART driver" |
| default 64 |
| help |
| Increasing this value decreases the number of UART interrupts needed |
| to receive large packets. |
| |
| config MODEM_IFACE_UART_ASYNC_RX_NUM_BUFFERS |
| int "Number of RX buffers available to the UART driver" |
| default 2 |
| help |
| This value needs to be twice the number of UART modems using the |
| driver to avoid buffer starvation. |
| |
| config MODEM_IFACE_UART_ASYNC_RX_TIMEOUT_US |
| int "Timeout for flushing RX buffers after receiving no additional data" |
| default 278 |
| help |
| Decreasing this value can help increase data throughput when high |
| baudrates are used. 278us is 4 bytes at 115200 baud. Decreasing this |
| value too much can result in spurious interrupts. Leaving it too |
| high can reduce data throughput. |
| |
| endif # MODEM_IFACE_UART_ASYNC |
| |
| endif # MODEM_IFACE_UART |
| |
| config MODEM_CMD_HANDLER |
| bool "Generic modem command handler" |
| select NET_BUF |
| help |
| This generic command handler uses a modem interface to process |
| incoming data and hand it back to the modem driver via callbacks |
| defined for: |
| - modem responses |
| - unsolicited messages |
| - specified handlers for current operation |
| To configure this layer for use, create a modem_cmd_handler_data |
| object and pass it's reference to modem_cmd_handler_init() along with |
| the modem_cmd_handler reference from your modem_context object. |
| |
| config MODEM_CMD_HANDLER_MAX_PARAM_COUNT |
| int "Maximum number of params parsed per command" |
| depends on MODEM_CMD_HANDLER |
| default 6 |
| help |
| This option sets the maximum number of parameters which may be |
| parsed by the command handler. This is also limited by the length |
| of the match_buf (match_buf_len) field as it needs to be large |
| enough to hold a single line of data (ending with /r). |
| |
| config MODEM_SOCKET |
| bool "Generic modem socket support layer" |
| help |
| This layer provides much of the groundwork for keeping track of |
| modem "sockets" throughout their lifecycle (from the initial offload |
| API calls through the command handler call back layers). |
| To configure this layer for use, create a modem_socket_config |
| object with your socket data and pass it's reference to |
| modem_socket_init(). |
| Note that the modem socket uses runtime allocated file descriptors |
| reserved from the fdtable, for which the max count is set using the |
| Kconfig option POSIX_MAX_FDS. Make sure to update this value as both |
| the modem sockets and the POSIX_API, if used, share them. |
| |
| config MODEM_SOCKET_PACKET_COUNT |
| int "Maximum number of stored packet sizes per socket" |
| depends on MODEM_SOCKET |
| default 6 |
| help |
| As the modem indicates more data is available to be received, |
| these values are organized into "packets". This setting limits |
| the maximum number of packet sizes the socket can keep track of. |
| |
| endif # MODEM_CONTEXT |
| |
| config MODEM_SHELL |
| bool "Modem shell utilities" |
| select SHELL |
| help |
| Activate shell module that provides modem utilities like |
| sending a command to the modem UART. |
| |
| config MODEM_SIM_NUMBERS |
| bool "Query the SIM for IMSI and ICCID" |
| depends on MODEM_SHELL |
| default y |
| help |
| Query the SIM card for the IMSI and ICCID identifiers. This |
| can be disabled if the application does not use a SIM. |
| |
| config MODEM_CELL_INFO |
| bool "Query for operator and cell info" |
| depends on MODEM_SHELL |
| help |
| Query for numerical operator id, location area code and cell id. |
| |
| source "drivers/modem/Kconfig.ublox-sara-r4" |
| source "drivers/modem/Kconfig.quectel-bg9x" |
| source "drivers/modem/Kconfig.wncm14a2a" |
| source "drivers/modem/Kconfig.gsm" |
| |
| source "drivers/modem/Kconfig.hl7800" |
| source "drivers/modem/Kconfig.simcom-sim7080" |
| |
| endif # MODEM |
