| /* |
| * Copyright (c) 2018 Nordic Semiconductor ASA |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| flash_controller: flash-controller@39000 { |
| compatible = "nordic,nrf91-flash-controller"; |
| reg = <0x39000 0x1000>; |
| partial-erase; |
| |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| |
| flash0: flash@0 { |
| compatible = "soc-nv-flash"; |
| erase-block-size = <4096>; |
| write-block-size = <4>; |
| }; |
| }; |
| |
| adc: adc@e000 { |
| compatible = "nordic,nrf-saadc"; |
| reg = <0xe000 0x1000>; |
| interrupts = <14 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| #io-channel-cells = <1>; |
| zephyr,pm-device-runtime-auto; |
| }; |
| |
| dppic0: dppic: dppic@17000 { |
| compatible = "nordic,nrf-dppic"; |
| reg = <0x17000 0x1000>; |
| status = "okay"; |
| }; |
| |
| egu0: egu@1b000 { |
| compatible = "nordic,nrf-egu"; |
| reg = <0x1b000 0x1000>; |
| interrupts = <27 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "okay"; |
| }; |
| |
| egu1: egu@1c000 { |
| compatible = "nordic,nrf-egu"; |
| reg = <0x1c000 0x1000>; |
| interrupts = <28 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "okay"; |
| }; |
| |
| egu2: egu@1d000 { |
| compatible = "nordic,nrf-egu"; |
| reg = <0x1d000 0x1000>; |
| interrupts = <29 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "okay"; |
| }; |
| |
| egu3: egu@1e000 { |
| compatible = "nordic,nrf-egu"; |
| reg = <0x1e000 0x1000>; |
| interrupts = <30 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "okay"; |
| }; |
| |
| egu4: egu@1f000 { |
| compatible = "nordic,nrf-egu"; |
| reg = <0x1f000 0x1000>; |
| interrupts = <31 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "okay"; |
| }; |
| |
| egu5: egu@20000 { |
| compatible = "nordic,nrf-egu"; |
| reg = <0x20000 0x1000>; |
| interrupts = <32 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "okay"; |
| }; |
| |
| ipc: ipc@2a000 { |
| compatible = "nordic,nrf-ipc"; |
| reg = <0x2a000 0x1000>; |
| interrupts = <42 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "okay"; |
| }; |
| |
| i2s0: i2s@28000 { |
| compatible = "nordic,nrf-i2s"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x28000 0x1000>; |
| interrupts = <40 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| kmu: kmu@39000 { |
| compatible = "nordic,nrf-kmu"; |
| reg = <0x39000 0x1000>; |
| interrupts = <57 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "okay"; |
| }; |
| |
| pdm0: pdm@26000 { |
| compatible = "nordic,nrf-pdm"; |
| reg = <0x26000 0x1000>; |
| interrupts = <38 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| regulators: regulator@4000 { |
| compatible = "nordic,nrf91x-regulators"; |
| reg = <0x4000 0x1000>; |
| status = "okay"; |
| }; |
| |
| vmc: vmc@3a000 { |
| compatible = "nordic,nrf-vmc"; |
| reg = <0x3a000 0x1000>; |
| status = "okay"; |
| }; |
| |
| uart0: uart@8000 { |
| compatible = "nordic,nrf-uarte"; |
| reg = <0x8000 0x1000>; |
| interrupts = <8 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| uart1: uart@9000 { |
| compatible = "nordic,nrf-uarte"; |
| reg = <0x9000 0x1000>; |
| interrupts = <9 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| uart2: uart@a000 { |
| compatible = "nordic,nrf-uarte"; |
| reg = <0xa000 0x1000>; |
| interrupts = <10 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| uart3: uart@b000 { |
| compatible = "nordic,nrf-uarte"; |
| reg = <0xb000 0x1000>; |
| interrupts = <11 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| i2c0: i2c@8000 { |
| /* |
| * This i2c node can be either TWIM or TWIS, for the user to pick: |
| * compatible = "nordic,nrf-twim" or |
| * "nordic,nrf-twis". |
| */ |
| compatible = "nordic,nrf-twim"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x8000 0x1000>; |
| interrupts = <8 NRF_DEFAULT_IRQ_PRIORITY>; |
| easydma-maxcnt-bits = <13>; |
| status = "disabled"; |
| zephyr,pm-device-runtime-auto; |
| }; |
| |
| i2c1: i2c@9000 { |
| /* |
| * This i2c node can be either TWIM or TWIS, for the user to pick: |
| * compatible = "nordic,nrf-twim" or |
| * "nordic,nrf-twis". |
| */ |
| compatible = "nordic,nrf-twim"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x9000 0x1000>; |
| interrupts = <9 NRF_DEFAULT_IRQ_PRIORITY>; |
| easydma-maxcnt-bits = <13>; |
| status = "disabled"; |
| zephyr,pm-device-runtime-auto; |
| }; |
| |
| i2c2: i2c@a000 { |
| /* |
| * This i2c node can be either TWIM or TWIS, for the user to pick: |
| * compatible = "nordic,nrf-twim" or |
| * "nordic,nrf-twis". |
| */ |
| compatible = "nordic,nrf-twim"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xa000 0x1000>; |
| interrupts = <10 NRF_DEFAULT_IRQ_PRIORITY>; |
| easydma-maxcnt-bits = <13>; |
| status = "disabled"; |
| zephyr,pm-device-runtime-auto; |
| }; |
| |
| i2c3: i2c@b000 { |
| /* |
| * This i2c node can be either TWIM or TWIS, for the user to pick: |
| * compatible = "nordic,nrf-twim" or |
| * "nordic,nrf-twis". |
| */ |
| compatible = "nordic,nrf-twim"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xb000 0x1000>; |
| interrupts = <11 NRF_DEFAULT_IRQ_PRIORITY>; |
| easydma-maxcnt-bits = <13>; |
| status = "disabled"; |
| zephyr,pm-device-runtime-auto; |
| }; |
| |
| spi0: spi@8000 { |
| /* |
| * This spi node can be either SPIM or SPIS, for the user to pick: |
| * compatible = "nordic,nrf-spim" or |
| * "nordic,nrf-spis". |
| */ |
| compatible = "nordic,nrf-spim"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x8000 0x1000>; |
| interrupts = <8 NRF_DEFAULT_IRQ_PRIORITY>; |
| max-frequency = <DT_FREQ_M(8)>; |
| easydma-maxcnt-bits = <13>; |
| status = "disabled"; |
| }; |
| |
| spi1: spi@9000 { |
| /* |
| * This spi node can be either SPIM or SPIS, for the user to pick: |
| * compatible = "nordic,nrf-spim" or |
| * "nordic,nrf-spis". |
| */ |
| compatible = "nordic,nrf-spim"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x9000 0x1000>; |
| interrupts = <9 NRF_DEFAULT_IRQ_PRIORITY>; |
| max-frequency = <DT_FREQ_M(8)>; |
| easydma-maxcnt-bits = <13>; |
| status = "disabled"; |
| }; |
| |
| spi2: spi@a000 { |
| /* |
| * This spi node can be either SPIM or SPIS, for the user to pick: |
| * compatible = "nordic,nrf-spim" or |
| * "nordic,nrf-spis". |
| */ |
| compatible = "nordic,nrf-spim"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xa000 0x1000>; |
| interrupts = <10 NRF_DEFAULT_IRQ_PRIORITY>; |
| max-frequency = <DT_FREQ_M(8)>; |
| easydma-maxcnt-bits = <13>; |
| status = "disabled"; |
| }; |
| |
| spi3: spi@b000 { |
| /* |
| * This spi node can be either SPIM or SPIS, for the user to pick: |
| * compatible = "nordic,nrf-spim" or |
| * "nordic,nrf-spis". |
| */ |
| compatible = "nordic,nrf-spim"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xb000 0x1000>; |
| interrupts = <11 NRF_DEFAULT_IRQ_PRIORITY>; |
| max-frequency = <DT_FREQ_M(8)>; |
| easydma-maxcnt-bits = <13>; |
| status = "disabled"; |
| }; |
| |
| pwm0: pwm@21000 { |
| compatible = "nordic,nrf-pwm"; |
| reg = <0x21000 0x1000>; |
| interrupts = <33 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| #pwm-cells = <3>; |
| }; |
| |
| pwm1: pwm@22000 { |
| compatible = "nordic,nrf-pwm"; |
| reg = <0x22000 0x1000>; |
| interrupts = <34 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| #pwm-cells = <3>; |
| }; |
| |
| pwm2: pwm@23000 { |
| compatible = "nordic,nrf-pwm"; |
| reg = <0x23000 0x1000>; |
| interrupts = <35 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| #pwm-cells = <3>; |
| }; |
| |
| pwm3: pwm@24000 { |
| compatible = "nordic,nrf-pwm"; |
| reg = <0x24000 0x1000>; |
| interrupts = <36 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| #pwm-cells = <3>; |
| }; |
| |
| gpio0: gpio@842500 { |
| compatible = "nordic,nrf-gpio"; |
| gpio-controller; |
| reg = <0x842500 0x300>; |
| #gpio-cells = <2>; |
| status = "disabled"; |
| port = <0>; |
| gpiote-instance = <&gpiote>; |
| }; |
| |
| rtc0: rtc@14000 { |
| compatible = "nordic,nrf-rtc"; |
| reg = <0x14000 0x1000>; |
| cc-num = <4>; |
| interrupts = <20 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| clock-frequency = <32768>; |
| prescaler = <1>; |
| }; |
| |
| rtc1: rtc@15000 { |
| compatible = "nordic,nrf-rtc"; |
| reg = <0x15000 0x1000>; |
| cc-num = <4>; |
| interrupts = <21 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| clock-frequency = <32768>; |
| prescaler = <1>; |
| }; |
| |
| clock: clock@5000 { |
| compatible = "nordic,nrf-clock"; |
| reg = <0x5000 0x1000>; |
| interrupts = <5 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "okay"; |
| }; |
| |
| power: power@5000 { |
| compatible = "nordic,nrf-power"; |
| reg = <0x5000 0x1000>; |
| ranges = <0x0 0x5000 0x1000>; |
| interrupts = <5 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "okay"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| gpregret1: gpregret1@51c { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "nordic,nrf-gpregret"; |
| reg = <0x51c 0x1>; |
| status = "okay"; |
| }; |
| |
| gpregret2: gpregret2@520 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "nordic,nrf-gpregret"; |
| reg = <0x520 0x1>; |
| status = "okay"; |
| }; |
| }; |
| |
| wdt: wdt0: watchdog@18000 { |
| compatible = "nordic,nrf-wdt"; |
| reg = <0x18000 0x1000>; |
| interrupts = <24 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "okay"; |
| }; |
| |
| timer0: timer@f000 { |
| compatible = "nordic,nrf-timer"; |
| status = "disabled"; |
| reg = <0xf000 0x1000>; |
| cc-num = <6>; |
| max-bit-width = <32>; |
| interrupts = <15 NRF_DEFAULT_IRQ_PRIORITY>; |
| prescaler = <0>; |
| }; |
| |
| timer1: timer@10000 { |
| compatible = "nordic,nrf-timer"; |
| status = "disabled"; |
| reg = <0x10000 0x1000>; |
| cc-num = <6>; |
| max-bit-width = <32>; |
| interrupts = <16 NRF_DEFAULT_IRQ_PRIORITY>; |
| prescaler = <0>; |
| }; |
| |
| timer2: timer@11000 { |
| compatible = "nordic,nrf-timer"; |
| status = "disabled"; |
| reg = <0x11000 0x1000>; |
| cc-num = <6>; |
| max-bit-width = <32>; |
| interrupts = <17 NRF_DEFAULT_IRQ_PRIORITY>; |
| prescaler = <0>; |
| }; |
