| CONFIG_NETWORKING=y |
| CONFIG_NET_LOG=y |
| CONFIG_LOG=y |
| CONFIG_NET_IPV6=y |
| CONFIG_NET_IPV4=y |
| CONFIG_NET_DHCPV4=n |
| CONFIG_NET_UDP=y |
| CONFIG_NET_TCP=y |
| CONFIG_NET_STATISTICS=y |
| CONFIG_NET_STATISTICS_USER_API=y |
| |
| CONFIG_TEST_RANDOM_GENERATOR=y |
| |
| CONFIG_NET_PKT_RX_COUNT=32 |
| CONFIG_NET_PKT_TX_COUNT=32 |
| CONFIG_NET_BUF_RX_COUNT=32 |
| CONFIG_NET_BUF_TX_COUNT=32 |
| CONFIG_NET_IF_UNICAST_IPV6_ADDR_COUNT=5 |
| CONFIG_NET_IF_MCAST_IPV6_ADDR_COUNT=5 |
| CONFIG_NET_IF_UNICAST_IPV4_ADDR_COUNT=1 |
| CONFIG_NET_MAX_CONTEXTS=10 |
| |
| CONFIG_INIT_STACKS=y |
| CONFIG_PRINTK=y |
| CONFIG_NET_SHELL=y |
| |
| # Ethernet is needed for gPTP |
| CONFIG_NET_L2_ETHERNET=y |
| |
| CONFIG_NET_CONFIG_NEED_IPV6=y |
| CONFIG_NET_CONFIG_NEED_IPV4=y |
| CONFIG_NET_CONFIG_SETTINGS=y |
| |
| # There will be one network interface. If you enable |
| # VLAN in overlay-vlan.conf, then gPTP will create three |
| # network interfaces. |
| |
| # First ethernet interface will use these settings |
| CONFIG_NET_CONFIG_MY_IPV6_ADDR="2001:db8::1" |
| CONFIG_NET_CONFIG_PEER_IPV6_ADDR="2001:db8::2" |
| CONFIG_NET_CONFIG_MY_IPV4_ADDR="192.0.2.1" |
| CONFIG_NET_CONFIG_PEER_IPV4_ADDR="192.0.2.2" |
| |
| # gPTP settings |
| CONFIG_NET_GPTP=y |
| CONFIG_NET_GPTP_STATISTICS=y |
| CONFIG_NET_GPTP_GM_CAPABLE=y |
| |
| # How many traffic classes to enable |
| CONFIG_NET_TC_TX_COUNT=6 |
| CONFIG_NET_TC_RX_COUNT=4 |
| |
| # Enable priority support in net_context |
| CONFIG_NET_CONTEXT_PRIORITY=y |
