| /* |
| * Copyright (c) 2024, Basalte bv |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #define DT_DRV_COMPAT nxp_imx_ecspi |
| |
| #include <zephyr/logging/log.h> |
| LOG_MODULE_REGISTER(spi_mcux_ecspi, CONFIG_SPI_LOG_LEVEL); |
| |
| #include <zephyr/device.h> |
| #include <zephyr/drivers/clock_control.h> |
| #include <zephyr/drivers/pinctrl.h> |
| #include <zephyr/drivers/spi.h> |
| #include <zephyr/drivers/spi/rtio.h> |
| #include <fsl_ecspi.h> |
| |
| #include "spi_context.h" |
| |
| #define SPI_MCUX_ECSPI_MAX_BURST 4096 |
| |
| struct spi_mcux_config { |
| ECSPI_Type *base; |
| const struct pinctrl_dev_config *pincfg; |
| const struct device *clock_dev; |
| clock_control_subsys_t clock_subsys; |
| void (*irq_config_func)(const struct device *dev); |
| }; |
| |
| struct spi_mcux_data { |
| ecspi_master_handle_t handle; |
| struct spi_context ctx; |
| |
| uint16_t dfs; |
| uint16_t word_size; |
| |
| uint32_t rx_data; |
| uint32_t tx_data; |
| }; |
| |
| static inline uint16_t bytes_per_word(uint16_t bits_per_word) |
| { |
| if (bits_per_word <= 8U) { |
| return 1U; |
| } |
| if (bits_per_word <= 16U) { |
| return 2U; |
| } |
| |
| return 4U; |
| } |
| |
| static void spi_mcux_transfer_next_packet(const struct device *dev) |
| { |
| const struct spi_mcux_config *config = dev->config; |
| struct spi_mcux_data *data = dev->data; |
| ECSPI_Type *base = config->base; |
| struct spi_context *ctx = &data->ctx; |
| ecspi_transfer_t transfer; |
| status_t status; |
| |
| if ((ctx->tx_len == 0) && (ctx->rx_len == 0)) { |
| /* nothing left to rx or tx, we're done! */ |
| spi_context_cs_control(&data->ctx, false); |
| spi_context_complete(&data->ctx, dev, 0); |
| return; |
| } |
| |
| transfer.channel = ctx->config->slave; |
| |
| if (spi_context_rx_buf_on(ctx)) { |
| transfer.rxData = &data->rx_data; |
| } else { |
| transfer.rxData = NULL; |
| } |
| |
| if (spi_context_tx_buf_on(ctx)) { |
| switch (data->dfs) { |
| case 1U: |
| data->tx_data = UNALIGNED_GET((uint8_t *)ctx->tx_buf); |
| break; |
| case 2U: |
| data->tx_data = UNALIGNED_GET((uint16_t *)ctx->tx_buf); |
| break; |
| case 4U: |
| data->tx_data = UNALIGNED_GET((uint32_t *)ctx->tx_buf); |
| break; |
| } |
| |
| transfer.txData = &data->tx_data; |
| } else { |
| transfer.txData = NULL; |
| } |
| |
| transfer.dataSize = data->dfs; |
| |
| status = ECSPI_MasterTransferNonBlocking(base, &data->handle, &transfer); |
| if (status != kStatus_Success) { |
| LOG_ERR("Transfer could not start"); |
| spi_context_cs_control(&data->ctx, false); |
| spi_context_complete(&data->ctx, dev, -EIO); |
| } |
| } |
| |
| static void spi_mcux_isr(const struct device *dev) |
| { |
| const struct spi_mcux_config *config = dev->config; |
| struct spi_mcux_data *data = dev->data; |
| ECSPI_Type *base = config->base; |
| |
| ECSPI_MasterTransferHandleIRQ(base, &data->handle); |
| } |
| |
| static void spi_mcux_master_transfer_callback(ECSPI_Type *base, ecspi_master_handle_t *handle, |
| status_t status, void *user_data) |
| { |
| const struct device *dev = (const struct device *)user_data; |
| struct spi_mcux_data *data = dev->data; |
| |
| if (spi_context_rx_buf_on(&data->ctx)) { |
| switch (data->dfs) { |
| case 1: |
| UNALIGNED_PUT(data->rx_data, (uint8_t *)data->ctx.rx_buf); |
| break; |
| case 2: |
| UNALIGNED_PUT(data->rx_data, (uint16_t *)data->ctx.rx_buf); |
| break; |
| case 4: |
| UNALIGNED_PUT(data->rx_data, (uint32_t *)data->ctx.rx_buf); |
| break; |
| } |
| } |
| |
| spi_context_update_tx(&data->ctx, data->dfs, 1); |
| spi_context_update_rx(&data->ctx, data->dfs, 1); |
| |
| spi_mcux_transfer_next_packet(dev); |
| } |
| |
| static int spi_mcux_configure(const struct device *dev, |
| const struct spi_config *spi_cfg) |
| { |
| const struct spi_mcux_config *config = dev->config; |
| struct spi_mcux_data *data = dev->data; |
| ECSPI_Type *base = config->base; |
| ecspi_master_config_t master_config; |
| uint32_t clock_freq; |
| uint16_t word_size; |
| |
| if (spi_context_configured(&data->ctx, spi_cfg)) { |
| /* This configuration is already in use */ |
| return 0; |
| } |
| |
| if (spi_cfg->operation & SPI_HALF_DUPLEX) { |
| LOG_ERR("Half-duplex not supported"); |
| return -ENOTSUP; |
| } |
| |
| if (spi_cfg->operation & SPI_TRANSFER_LSB) { |
| LOG_ERR("HW byte re-ordering not supported"); |
| return -ENOTSUP; |
| } |
| |
| if (spi_cfg->slave > kECSPI_Channel3) { |
| LOG_ERR("Slave %d is greater than %d", spi_cfg->slave, kECSPI_Channel3); |
| return -EINVAL; |
| } |
| |
| if (clock_control_get_rate(config->clock_dev, config->clock_subsys, &clock_freq)) { |
| LOG_ERR("Failed to get clock rate"); |
| return -EINVAL; |
| } |
| |
| word_size = SPI_WORD_SIZE_GET(spi_cfg->operation); |
| if (0 == word_size || word_size > 32) { |
| LOG_ERR("Invalid word size (0 < %d <= 32)", word_size); |
| return -EINVAL; |
| } |
| |
| ECSPI_MasterGetDefaultConfig(&master_config); |
| |
| master_config.channel = (ecspi_channel_source_t)spi_cfg->slave; |
| master_config.channelConfig.polarity = |
| (SPI_MODE_GET(spi_cfg->operation) & SPI_MODE_CPOL) |
| ? kECSPI_PolarityActiveLow |
| : kECSPI_PolarityActiveHigh; |
| master_config.channelConfig.phase = |
| (SPI_MODE_GET(spi_cfg->operation) & SPI_MODE_CPHA) |
| ? kECSPI_ClockPhaseSecondEdge |
| : kECSPI_ClockPhaseFirstEdge; |
| master_config.baudRate_Bps = spi_cfg->frequency; |
| master_config.burstLength = word_size; |
| |
| master_config.enableLoopback = (SPI_MODE_GET(spi_cfg->operation) & SPI_MODE_LOOP); |
| |
| if (!spi_cs_is_gpio(spi_cfg)) { |
| uint32_t clock_cycles = |
| DIV_ROUND_UP(spi_cfg->cs.delay * USEC_PER_SEC, spi_cfg->frequency); |
| |
| if (clock_cycles > 63U) { |
| LOG_ERR("CS delay is greater than 63 clock cycles (%u)", clock_cycles); |
| return -EINVAL; |
| } |
| master_config.chipSelectDelay = (uint8_t)clock_cycles; |
| } |
| |
| ECSPI_MasterInit(base, &master_config, clock_freq); |
| ECSPI_MasterTransferCreateHandle(base, &data->handle, |
| spi_mcux_master_transfer_callback, |
| (void *)dev); |
| |
| data->word_size = word_size; |
| data->dfs = bytes_per_word(word_size); |
| data->ctx.config = spi_cfg; |
| |
| return 0; |
| } |
| |
| static int transceive(const struct device *dev, |
| const struct spi_config *spi_cfg, |
| const struct spi_buf_set *tx_bufs, |
| const struct spi_buf_set *rx_bufs, |
| bool asynchronous, |
| spi_callback_t cb, |
| void *userdata) |
| { |
| struct spi_mcux_data *data = dev->data; |
| int ret; |
| |
| spi_context_lock(&data->ctx, asynchronous, cb, userdata, spi_cfg); |
| |
| ret = spi_mcux_configure(dev, spi_cfg); |
| if (ret) { |
| goto out; |
| } |
| |
| spi_context_buffers_setup(&data->ctx, tx_bufs, rx_bufs, data->dfs); |
| spi_context_cs_control(&data->ctx, true); |
| |
| spi_mcux_transfer_next_packet(dev); |
| ret = spi_context_wait_for_completion(&data->ctx); |
| |
| out: |
| spi_context_release(&data->ctx, ret); |
| |
| return ret; |
| } |
| |
| static int spi_mcux_transceive(const struct device *dev, |
| const struct spi_config *spi_cfg, |
| const struct spi_buf_set *tx_bufs, |
| const struct spi_buf_set *rx_bufs) |
| { |
| return transceive(dev, spi_cfg, tx_bufs, rx_bufs, false, NULL, NULL); |
| } |
| |
| #ifdef CONFIG_SPI_ASYNC |
| static int spi_mcux_transceive_async(const struct device *dev, |
| const struct spi_config *spi_cfg, |
| const struct spi_buf_set *tx_bufs, |
| const struct spi_buf_set *rx_bufs, |
| spi_callback_t cb, |
| void *userdata) |
| { |
| return transceive(dev, spi_cfg, tx_bufs, rx_bufs, true, cb, userdata); |
| } |
| #endif /* CONFIG_SPI_ASYNC */ |
| |
| static int spi_mcux_release(const struct device *dev, const struct spi_config *spi_cfg) |
| { |
| struct spi_mcux_data *data = dev->data; |
| |
| ARG_UNUSED(spi_cfg); |
| |
| spi_context_unlock_unconditionally(&data->ctx); |
| |
| return 0; |
| } |
| |
| static int spi_mcux_init(const struct device *dev) |
| { |
| int ret; |
| const struct spi_mcux_config *config = dev->config; |
| struct spi_mcux_data *data = dev->data; |
| |
| config->irq_config_func(dev); |
| |
| ret = spi_context_cs_configure_all(&data->ctx); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| ret = pinctrl_apply_state(config->pincfg, PINCTRL_STATE_DEFAULT); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| spi_context_unlock_unconditionally(&data->ctx); |
| |
| return 0; |
| } |
| |
| static const struct spi_driver_api spi_mcux_driver_api = { |
| .transceive = spi_mcux_transceive, |
| #ifdef CONFIG_SPI_ASYNC |
| .transceive_async = spi_mcux_transceive_async, |
| #endif |
| #ifdef CONFIG_SPI_RTIO |
| .iodev_submit = spi_rtio_iodev_default_submit, |
| #endif |
| .release = spi_mcux_release, |
| }; |
| |
| #define SPI_MCUX_ECSPI_INIT(n) \ |
| PINCTRL_DT_INST_DEFINE(n); \ |
| static void spi_mcux_config_func_##n(const struct device *dev); \ |
| \ |
| static const struct spi_mcux_config spi_mcux_config_##n = { \ |
| .base = (ECSPI_Type *) DT_INST_REG_ADDR(n), \ |
| .pincfg = PINCTRL_DT_INST_DEV_CONFIG_GET(n), \ |
| .clock_dev = DEVICE_DT_GET(DT_INST_CLOCKS_CTLR(n)), \ |
| .clock_subsys = (clock_control_subsys_t)DT_INST_CLOCKS_CELL(n, name), \ |
| .irq_config_func = spi_mcux_config_func_##n, \ |
| }; \ |
| \ |
| static struct spi_mcux_data spi_mcux_data_##n = { \ |
| SPI_CONTEXT_INIT_LOCK(spi_mcux_data_##n, ctx), \ |
| SPI_CONTEXT_INIT_SYNC(spi_mcux_data_##n, ctx), \ |
| SPI_CONTEXT_CS_GPIOS_INITIALIZE(DT_DRV_INST(n), ctx) \ |
| }; \ |
| \ |
| DEVICE_DT_INST_DEFINE(n, spi_mcux_init, NULL, \ |
| &spi_mcux_data_##n, &spi_mcux_config_##n, \ |
| POST_KERNEL, CONFIG_SPI_INIT_PRIORITY, \ |
| &spi_mcux_driver_api); \ |
| \ |
| static void spi_mcux_config_func_##n(const struct device *dev) \ |
| { \ |
| IRQ_CONNECT(DT_INST_IRQN(n), DT_INST_IRQ(n, priority), \ |
| spi_mcux_isr, DEVICE_DT_INST_GET(n), 0); \ |
| \ |
| irq_enable(DT_INST_IRQN(n)); \ |
| } |
| |
| DT_INST_FOREACH_STATUS_OKAY(SPI_MCUX_ECSPI_INIT) |