| /* |
| * Copyright 2023 NXP |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| /** |
| * @file |
| * @brief Definitions for IEEE 802.3 management interface |
| */ |
| |
| #ifndef ZEPHYR_INCLUDE_NET_MDIO_H_ |
| #define ZEPHYR_INCLUDE_NET_MDIO_H_ |
| |
| /** |
| * @brief Definitions for IEEE 802.3 management interface |
| * @defgroup ethernet_mdio IEEE 802.3 management interface |
| * @since 3.5 |
| * @version 0.8.0 |
| * @ingroup ethernet |
| * @{ |
| */ |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /** MDIO transaction operation code */ |
| enum mdio_opcode { |
| /** IEEE 802.3 22.2.4.5.4 write operation */ |
| MDIO_OP_C22_WRITE = 1, |
| |
| /** IEEE 802.3 22.2.4.5.4 read operation */ |
| MDIO_OP_C22_READ = 2, |
| |
| /** IEEE 802.3 45.3.4 address operation */ |
| MDIO_OP_C45_ADDRESS = 0, |
| |
| /** IEEE 802.3 45.3.4 write operation */ |
| MDIO_OP_C45_WRITE = 1, |
| |
| /** IEEE 802.3 45.3.4 post-read-increment-address operation */ |
| MDIO_OP_C45_READ_INC = 2, |
| |
| /** IEEE 802.3 45.3.4 read operation */ |
| MDIO_OP_C45_READ = 3 |
| }; |
| |
| /* MDIO Manageable Device addresses */ |
| /** Physical Medium Attachment / Physical Medium Dependent */ |
| #define MDIO_MMD_PMAPMD 0x01U |
| /** WAN Interface Sublayer */ |
| #define MDIO_MMD_WIS 0x02U |
| /** Physical Coding Sublayer */ |
| #define MDIO_MMD_PCS 0x03U |
| /** PHY Extender Sublayer */ |
| #define MDIO_MMD_PHYXS 0x04U |
| /** DTE Extender Sublayer */ |
| #define MDIO_MMD_DTEXS 0x05U |
| /** Transmission Convergence */ |
| #define MDIO_MMD_TC 0x06U |
| /** Auto-negotiation */ |
| #define MDIO_MMD_AN 0x07U |
| /** Separated PMA (1) */ |
| #define MDIO_MMD_SEPARATED_PMA1 0x08U |
| /** Separated PMA (2) */ |
| #define MDIO_MMD_SEPARATED_PMA2 0x09U |
| /** Separated PMA (3) */ |
| #define MDIO_MMD_SEPARATED_PMA3 0x0AU |
| /** Separated PMA (4) */ |
| #define MDIO_MMD_SEPARATED_PMA4 0x0BU |
| /** Clause 22 extension */ |
| #define MDIO_MMD_C22EXT 0x1DU |
| /** Vendor Specific 1 */ |
| #define MDIO_MMD_VENDOR_SPECIFIC1 0x1EU |
| /** Vendor Specific 2 */ |
| #define MDIO_MMD_VENDOR_SPECIFIC2 0x1FU |
| |
| /* MDIO generic registers */ |
| /** Control 1 */ |
| #define MDIO_CTRL1 0x0000U |
| /** Status 1 */ |
| #define MDIO_STAT1 0x0001U |
| /** Device identifier (1) */ |
| #define MDIO_DEVID1 0x0002U |
| /** Device identifier (2) */ |
| #define MDIO_DEVID2 0x0003U |
| /** Speed ability */ |
| #define MDIO_SPEED 0x0004U |
| /** Devices in package (1) */ |
| #define MDIO_DEVS1 0x0005U |
| /** Devices in package (2) */ |
| #define MDIO_DEVS2 0x0006U |
| /** Control 2 */ |
| #define MDIO_CTRL2 0x0007U |
| /** Status 2 */ |
| #define MDIO_STAT2 0x0008U |
| /** Package identifier (1) */ |
| #define MDIO_PKGID1 0x000EU |
| /** Package identifier (2) */ |
| #define MDIO_PKGID2 0x000FU |
| /* PCS Register: EEE capability Register */ |
| #define MDIO_PCS_EEE_CAP 0x0014U |
| /* Auto-negotiation Register: EEE advertisement Register */ |
| #define MDIO_AN_EEE_ADV 0x003CU |
| |
| |
| /* BASE-T1 registers */ |
| /** BASE-T1 Auto-negotiation control */ |
| #define MDIO_AN_T1_CTRL 0x0200U |
| /** BASE-T1 Auto-negotiation status */ |
| #define MDIO_AN_T1_STAT 0x0201U |
| /** BASE-T1 Auto-negotiation advertisement register [15:0] */ |
| #define MDIO_AN_T1_ADV_L 0x0202U |
| /** BASE-T1 Auto-negotiation advertisement register [31:16] */ |
| #define MDIO_AN_T1_ADV_M 0x0203U |
| /** BASE-T1 Auto-negotiation advertisement register [47:32] */ |
| #define MDIO_AN_T1_ADV_H 0x0204U |
| /** BASE-T1 PMA/PMD control register */ |
| #define MDIO_PMA_PMD_BT1_CTRL 0x0834U |
| |
| /* BASE-T1 Auto-negotiation Control register */ |
| /** Auto-negotiation Restart */ |
| #define MDIO_AN_T1_CTRL_RESTART BIT(9) |
| /** Auto-negotiation Enable */ |
| #define MDIO_AN_T1_CTRL_EN BIT(12) |
| |
| /* BASE-T1 Auto-negotiation Status register */ |
| /** Link Status */ |
| #define MDIO_AN_T1_STAT_LINK_STATUS BIT(2) |
| /** Auto-negotiation Ability */ |
| #define MDIO_AN_T1_STAT_ABLE BIT(3) |
| /** Auto-negotiation Remote Fault */ |
| #define MDIO_AN_T1_STAT_REMOTE_FAULT BIT(4) |
| /** Auto-negotiation Complete */ |
| #define MDIO_AN_T1_STAT_COMPLETE BIT(5) |
| /** Page Received */ |
| #define MDIO_AN_T1_STAT_PAGE_RX BIT(6) |
| |
| /* BASE-T1 Auto-negotiation Advertisement register [15:0] */ |
| /** Pause Ability */ |
| #define MDIO_AN_T1_ADV_L_PAUSE_CAP BIT(10) |
| /** Pause Ability */ |
| #define MDIO_AN_T1_ADV_L_PAUSE_ASYM BIT(11) |
| /** Force Master/Slave Configuration */ |
| #define MDIO_AN_T1_ADV_L_FORCE_MS BIT(12) |
| /** Remote Fault */ |
| #define MDIO_AN_T1_ADV_L_REMOTE_FAULT BIT(13) |
| /** Acknowledge (ACK) */ |
| #define MDIO_AN_T1_ADV_L_ACK BIT(14) |
| /** Next Page Request */ |
| #define MDIO_AN_T1_ADV_L_NEXT_PAGE_REQ BIT(15) |
| |
| /* BASE-T1 Auto-negotiation Advertisement register [31:16] */ |
| /** 10BASE-T1L Ability */ |
| #define MDIO_AN_T1_ADV_M_B10L BIT(14) |
| /** Master/slave Configuration */ |
| #define MDIO_AN_T1_ADV_M_MST BIT(4) |
| |
| /* BASE-T1 Auto-negotiation Advertisement register [47:32] */ |
| /** 10BASE-T1L High Level Transmit Operating Mode Request */ |
| #define MDIO_AN_T1_ADV_H_10L_TX_HI_REQ BIT(12) |
| /** 10BASE-T1L High Level Transmit Operating Mode Ability */ |
| #define MDIO_AN_T1_ADV_H_10L_TX_HI BIT(13) |
| |
| /* BASE-T1 PMA/PMD control register */ |
| /** BASE-T1 master/slave configuration */ |
| #define MDIO_PMA_PMD_BT1_CTRL_CFG_MST BIT(14) |
| |
| |
| /* 10BASE-T1L registers */ |
| /** 10BASE-T1L PMA control */ |
| #define MDIO_PMA_B10L_CTRL 0x08F6U |
| /** 10BASE-T1L PMA status */ |
| #define MDIO_PMA_B10L_STAT 0x08F7U |
| /** 10BASE-T1L PMA link status*/ |
| #define MDIO_PMA_B10L_LINK_STAT 0x8302U |
| /** 10BASE-T1L PCS control */ |
| #define MDIO_PCS_B10L_CTRL 0x08E6U |
| /** 10BASE-T1L PCS status */ |
| #define MDIO_PCS_B10L_STAT 0x08E7U |
| |
| /* 10BASE-T1L PMA control register */ |
| /** 10BASE-T1L Transmit Disable Mode */ |
| #define MDIO_PMA_B10L_CTRL_TX_DIS_MODE_EN BIT(14) |
| /** 10BASE-T1L Transmit Voltage Amplitude Control */ |
| #define MDIO_PMA_B10L_CTRL_TX_LVL_HI BIT(12) |
| /** 10BASE-T1L EEE Enable */ |
| #define MDIO_PMA_B10L_CTRL_EEE BIT(10) |
| /** 10BASE-T1L PMA Loopback */ |
| #define MDIO_PMA_B10L_CTRL_LB_PMA_LOC_EN BIT(0) |
| |
| /* 10BASE-T1L PMA status register */ |
| /** 10BASE-T1L PMA receive link up */ |
| #define MDIO_PMA_B10L_STAT_LINK BIT(0) |
| /** 10BASE-T1L Fault condition detected */ |
| #define MDIO_PMA_B10L_STAT_FAULT BIT(1) |
| /** 10BASE-T1L Receive polarity is reversed */ |
| #define MDIO_PMA_B10L_STAT_POLARITY BIT(2) |
| /** 10BASE-T1L Able to detect fault on receive path */ |
| #define MDIO_PMA_B10L_STAT_RECV_FAULT BIT(9) |
| /** 10BASE-T1L PHY has EEE ability */ |
| #define MDIO_PMA_B10L_STAT_EEE BIT(10) |
| /** 10BASE-T1L PMA has low-power ability */ |
| #define MDIO_PMA_B10L_STAT_LOW_POWER BIT(11) |
| /** 10BASE-T1L PHY has 2.4 Vpp operating mode ability */ |
| #define MDIO_PMA_B10L_STAT_2V4_ABLE BIT(12) |
| /** 10BASE-T1L PHY has loopback ability */ |
| #define MDIO_PMA_B10L_STAT_LB_ABLE BIT(13) |
| |
| /* 10BASE-T1L PMA link status*/ |
| /** 10BASE-T1L Remote Receiver Status OK Latch Low */ |
| #define MDIO_PMA_B10L_LINK_STAT_REM_RCVR_STAT_OK_LL BIT(9) |
| /** 10BASE-T1L Remote Receiver Status OK */ |
| #define MDIO_PMA_B10L_LINK_STAT_REM_RCVR_STAT_OK BIT(8) |
| /** 10BASE-T1L Local Receiver Status OK */ |
| #define MDIO_PMA_B10L_LINK_STAT_LOC_RCVR_STAT_OK_LL BIT(7) |
| /** 10BASE-T1L Local Receiver Status OK */ |
| #define MDIO_PMA_B10L_LINK_STAT_LOC_RCVR_STAT_OK BIT(6) |
| /** 10BASE-T1L Descrambler Status OK Latch Low */ |
| #define MDIO_PMA_B10L_LINK_STAT_DSCR_STAT_OK_LL BIT(5) |
| /** 10BASE-T1L Descrambler Status OK */ |
| #define MDIO_PMA_B10L_LINK_STAT_DSCR_STAT_OK BIT(4) |
| /** 10BASE-T1L Link Status OK Latch Low */ |
| #define MDIO_PMA_B10L_LINK_STAT_LINK_STAT_OK_LL BIT(1) |
| /** 10BASE-T1L Link Status OK */ |
| #define MDIO_PMA_B10L_LINK_STAT_LINK_STAT_OK BIT(0) |
| |
| /* 10BASE-T1L PCS control */ |
| /** 10BASE-T1L PCS Loopback Enable */ |
| #define MDIO_PCS_B10L_CTRL_LB_PCS_EN BIT(14) |
| |
| /* 10BASE-T1L PCS status */ |
| /** 10BASE-T1L PCS Descrambler Status */ |
| #define MDIO_PCS_B10L_STAT_DSCR_STAT_OK_LL BIT(2) |
| |
| /* Auto-negotiation Register: EEE advertisement Register */ |
| /** Advertise 1000T capability */ |
| #define MDIO_AN_EEE_ADV_1000T BIT(2) |
| /** Advertise 100TX capability */ |
| #define MDIO_AN_EEE_ADV_100TX BIT(1) |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| /** |
| * @} |
| */ |
| |
| #endif /* ZEPHYR_INCLUDE_NET_MDIO_H_ */ |
