| /* |
| * Copyright (c) 2020 Matija Tudan |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <zephyr/kernel.h> |
| #include <zephyr/drivers/i2c.h> |
| #include <zephyr/drivers/dac.h> |
| #include <zephyr/sys/util.h> |
| #include <zephyr/sys/byteorder.h> |
| #include <zephyr/sys/__assert.h> |
| #include <zephyr/logging/log.h> |
| |
| LOG_MODULE_REGISTER(dac_dacx3608, CONFIG_DAC_LOG_LEVEL); |
| |
| /* Register addresses */ |
| #define DACX3608_REG_DEVICE_CONFIG 0x01U |
| #define DACX3608_REG_STATUS_TRIGGER 0x02U |
| #define DACX3608_REG_BRDCAST 0x03U |
| #define DACX3608_REG_DACA_DATA 0x08U |
| |
| #define DAC43608_DEVICE_ID 0x500 /* STATUS_TRIGGER[DEVICE_ID] */ |
| #define DAC53608_DEVICE_ID 0x300 /* STATUS_TRIGGER[DEVICE_ID] */ |
| #define DACX3608_SW_RST 0x0A /* STATUS_TRIGGER[SW_RST] */ |
| #define DACX3608_POR_DELAY 5 |
| #define DACX3608_MAX_CHANNEL 8 |
| |
| struct dacx3608_config { |
| struct i2c_dt_spec bus; |
| uint8_t resolution; |
| }; |
| |
| struct dacx3608_data { |
| uint8_t configured; |
| }; |
| |
| static int dacx3608_reg_read(const struct device *dev, uint8_t reg, |
| uint16_t *val) |
| { |
| const struct dacx3608_config *cfg = dev->config; |
| |
| if (i2c_burst_read_dt(&cfg->bus, reg, (uint8_t *) val, 2) < 0) { |
| LOG_ERR("I2C read failed"); |
| return -EIO; |
| } |
| |
| *val = sys_be16_to_cpu(*val); |
| |
| return 0; |
| } |
| |
| static int dacx3608_reg_write(const struct device *dev, uint8_t reg, |
| uint16_t val) |
| { |
| const struct dacx3608_config *cfg = dev->config; |
| uint8_t buf[3] = {reg, val >> 8, val & 0xFF}; |
| |
| return i2c_write_dt(&cfg->bus, buf, sizeof(buf)); |
| } |
| |
| int dacx3608_reg_update(const struct device *dev, uint8_t reg, |
| uint16_t mask, bool setting) |
| { |
| uint16_t regval; |
| int ret; |
| |
| ret = dacx3608_reg_read(dev, reg, ®val); |
| if (ret) { |
| return -EIO; |
| } |
| |
| if (setting) { |
| regval |= mask; |
| } else { |
| regval &= ~mask; |
| } |
| |
| ret = dacx3608_reg_write(dev, reg, regval); |
| if (ret) { |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int dacx3608_channel_setup(const struct device *dev, |
| const struct dac_channel_cfg *channel_cfg) |
| { |
| const struct dacx3608_config *config = dev->config; |
| struct dacx3608_data *data = dev->data; |
| bool setting = false; |
| int ret; |
| |
| if (channel_cfg->channel_id > DACX3608_MAX_CHANNEL - 1) { |
| LOG_ERR("Unsupported channel %d", channel_cfg->channel_id); |
| return -ENOTSUP; |
| } |
| |
| if (channel_cfg->resolution != config->resolution) { |
| LOG_ERR("Unsupported resolution %d", channel_cfg->resolution); |
| return -ENOTSUP; |
| } |
| |
| if (data->configured & BIT(channel_cfg->channel_id)) { |
| LOG_DBG("Channel %d already configured", channel_cfg->channel_id); |
| return 0; |
| } |
| |
| /* Clear PDNn bit */ |
| ret = dacx3608_reg_update(dev, DACX3608_REG_DEVICE_CONFIG, |
| BIT(channel_cfg->channel_id), setting); |
| if (ret) { |
| LOG_ERR("Unable to update DEVICE_CONFIG register"); |
| return -EIO; |
| } |
| |
| data->configured |= BIT(channel_cfg->channel_id); |
| |
| LOG_DBG("Channel %d initialized", channel_cfg->channel_id); |
| |
| return 0; |
| } |
| |
| static int dacx3608_write_value(const struct device *dev, uint8_t channel, |
| uint32_t value) |
| { |
| const struct dacx3608_config *config = dev->config; |
| struct dacx3608_data *data = dev->data; |
| uint16_t regval; |
| int ret; |
| |
| if (channel > DACX3608_MAX_CHANNEL - 1) { |
| LOG_ERR("Unsupported channel %d", channel); |
| return -ENOTSUP; |
| } |
| |
| if (!(data->configured & BIT(channel))) { |
| LOG_ERR("Channel %d not initialized", channel); |
| return -EINVAL; |
| } |
| |
| if (value >= (1 << (config->resolution))) { |
| LOG_ERR("Value %d out of range", value); |
| return -EINVAL; |
| } |
| |
| /* |
| * Shift passed value two times left because first two bits are Don't Care |
| * |
| * DACn_DATA register format: |
| * |
| * | 15 14 13 12 | 11 10 9 8 7 6 5 4 3 2 | 1 0 | |
| * |-------------|---------------------------------|------------| |
| * | Don't Care | DAC53608[9:0] / DAC43608[7:0] | Don't Care | |
| */ |
| regval = value << 2; |
| regval &= 0xFFFF; |
| |
| ret = dacx3608_reg_write(dev, DACX3608_REG_DACA_DATA + channel, regval); |
| if (ret) { |
| LOG_ERR("Unable to set value %d on channel %d", value, channel); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int dacx3608_soft_reset(const struct device *dev) |
| { |
| uint16_t regval = DACX3608_SW_RST; |
| int ret; |
| |
| ret = dacx3608_reg_write(dev, DACX3608_REG_STATUS_TRIGGER, regval); |
| if (ret) { |
| return -EIO; |
| } |
| k_msleep(DACX3608_POR_DELAY); |
| |
| return 0; |
| } |
| |
| static int dacx3608_device_id_check(const struct device *dev) |
| { |
| uint16_t dev_id; |
| int ret; |
| |
| ret = dacx3608_reg_read(dev, DACX3608_REG_STATUS_TRIGGER, &dev_id); |
| if (ret) { |
| LOG_ERR("Unable to read device ID"); |
| return -EIO; |
| } |
| |
| switch (dev_id) { |
| case DAC43608_DEVICE_ID: |
| case DAC53608_DEVICE_ID: |
| LOG_DBG("Device ID %#4x", dev_id); |
| break; |
| default: |
| LOG_ERR("Unknown Device ID %#4x", dev_id); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int dacx3608_init(const struct device *dev) |
| { |
| const struct dacx3608_config *config = dev->config; |
| struct dacx3608_data *data = dev->data; |
| int ret; |
| |
| if (!device_is_ready(config->bus.bus)) { |
| LOG_ERR("I2C device not ready"); |
| return -ENODEV; |
| } |
| |
| ret = dacx3608_soft_reset(dev); |
| if (ret) { |
| LOG_ERR("Soft-reset failed"); |
| return ret; |
| } |
| |
| ret = dacx3608_device_id_check(dev); |
| if (ret) { |
| return ret; |
| } |
| |
| data->configured = 0; |
| |
| LOG_DBG("Init complete"); |
| |
| return 0; |
| } |
| |
| static const struct dac_driver_api dacx3608_driver_api = { |
| .channel_setup = dacx3608_channel_setup, |
| .write_value = dacx3608_write_value, |
| }; |
| |
| #define INST_DT_DACX3608(inst, t) DT_INST(inst, ti_dac##t) |
| |
| #define DACX3608_DEVICE(t, n, res) \ |
| static struct dacx3608_data dac##t##_data_##n; \ |
| static const struct dacx3608_config dac##t##_config_##n = { \ |
| .bus = I2C_DT_SPEC_GET(INST_DT_DACX3608(n, t)), \ |
| .resolution = res, \ |
| }; \ |
| DEVICE_DT_DEFINE(INST_DT_DACX3608(n, t), \ |
| &dacx3608_init, NULL, \ |
| &dac##t##_data_##n, \ |
| &dac##t##_config_##n, POST_KERNEL, \ |
| CONFIG_DAC_INIT_PRIORITY, \ |
| &dacx3608_driver_api) |
| |
| /* |
| * DAC43608: 8-bit |
| */ |
| #define DAC43608_DEVICE(n) DACX3608_DEVICE(43608, n, 8) |
| |
| /* |
| * DAC53608: 10-bit |
| */ |
| #define DAC53608_DEVICE(n) DACX3608_DEVICE(53608, n, 10) |
| |
| #define CALL_WITH_ARG(arg, expr) expr(arg) |
| |
| #define INST_DT_DACX3608_FOREACH(t, inst_expr) \ |
| LISTIFY(DT_NUM_INST_STATUS_OKAY(ti_dac##t), \ |
| CALL_WITH_ARG, (), inst_expr) |
| |
| INST_DT_DACX3608_FOREACH(43608, DAC43608_DEVICE); |
| INST_DT_DACX3608_FOREACH(53608, DAC53608_DEVICE); |