dts/bindings/spi/nxp,imx-flexspi.yaml

# Copyright (c) 2018, NXP
# SPDX-License-Identifier: Apache-2.0

description: NXP FlexSPI controller

compatible: "nxp,imx-flexspi"

include: [spi-controller.yaml, pinctrl-device.yaml]

properties:
    reg:
      required: true

    interrupts:
      required: true

    ahb-bufferable:
      type: boolean
      required: false
      description: |
        Enable AHB bufferable write access by setting register field
        AHBCR[BUFFERABLEEN].

    ahb-cacheable:
      type: boolean
      required: false
      description: |
        Enable AHB cacheable read access by setting register field
        AHBCR[CACHEABLEEN].

    ahb-prefetch:
      type: boolean
      required: false
      description: |
        Enable AHB read prefetch by setting register field AHBCR[PREFETCHEN].

    ahb-read-addr-opt:
      type: boolean
      required: false
      description: |
        Remove burst start address alignment limitation by setting register
        field AHBCR[READADDROPT].

    combination-mode:
      type: boolean
      required: false
      description: |
        Combine port A and port B data pins to support octal mode access by
        setting register field MCR0[COMBINATIONEN].

    sck-differential-clock:
      type: boolean
      required: false
      description: |
        Enable/disable SCKB pad use as SCKA differential clock output,
        when enabled, Port B flash access is not available.

    rx-clock-source:
      type: int
      required: false
      default: 0
      enum:
        - 0 # Loopback internally
        - 1 # Loopback from DQS pad
        - 2 # Loopback from SCK pad
        - 3 # External input from DQS pad
      description: |
        Source clock for flash read. See the RXCLKSRC field in register MCR0.
        The default corresponds to the reset value of the register field.

child-binding:
    description: NXP FlexSPI port

    include: nxp,imx-flexspi-device.yaml