| :orphan: |
| |
| .. _zephyr_2.7: |
| |
| Zephyr 2.7.0 |
| ############ |
| |
| We are pleased to announce the release of Zephyr RTOS version 2.7.0 (LTS2). |
| |
| Major enhancements since v2.6.0 include: |
| |
| * Bluetooth Audio, Direction Finding, and Mesh improvements |
| * Support for Bluetooth Advertisement PDU Chaining |
| * Added support for armclang / armlinker toolchain |
| * Added support for MWDT C / C++ toolchain |
| * Update to CMSIS v5.8.0 (Core v5.5.0, DSP v1.9.0) |
| * Support for M-Profile Vector Extensions (MVE) on ARMv8.1-M |
| * Improved thread safety for Newlib and C++ on SMP-capable systems |
| * IEEE 802.15.4 Software Address Filtering |
| * New Action-based Power Management API |
| * USB Device Framework now includes all Chapter 9 defines and structures |
| * Generic System Controller (``syscon``) driver and emulator |
| * Linker Support for Tightly-Coupled Memory in RISC-V |
| * Additional Blocking API calls for LoRa |
| * Support for extended PCI / PCIe capabilities, improved MIS-X support |
| * Added Support for Service Type Enumeration (STE) with mDNS / DNS Service Discovery |
| * Added Zephyr Thread Awareness for OpenOCD to West |
| * EEPROM now can be emulated in flash |
| * Added both Ethernet MDIO and Ethernet generic PHY drivers |
| |
| Additional Major enhancements since v1.14.0 (LTS1) include: |
| |
| * The kernel now supports both 32- and 64-bit architectures |
| * We added support for SOCKS5 proxy |
| * Introduced support for 6LoCAN, a 6Lo adaption layer for Controller Area Networks |
| * We added support for Point-to-Point Protocol (PPP) |
| * We added support for UpdateHub, an end-to-end solution for over-the-air device updates |
| * We added support for ARM Cortex-R Architecture |
| * Normalized APIs across all architectures |
| * Expanded support for ARMv6-M architecture |
| * Added support for numerous new boards and shields |
| * Added numerous new drivers and sensors |
| * Added BLE support on Vega platform |
| * Memory size improvements to Bluetooth host stack |
| * We added initial support for 64-bit ARMv8-A architecture |
| * CANopen protocol support through 3rd party CANopenNode stack |
| * LoRa support was added along with the SX1276 LoRa modem driver |
| * A new Zephyr CMake package has been introduced |
| * A new Devicetree API which provides access to virtually all DT nodes and properties |
| * The kernel timeout API has been overhauled |
| * A new k_heap/sys_heap allocator, with improved performance |
| * Zephyr now integrates with the TF-M (Trusted Firmware M) PSA-compliant framework |
| * The Bluetooth Low Energy Host now supports LE Advertising Extensions |
| * The CMSIS-DSP library is now included and integrated |
| * Introduced initial support for virtual memory management |
| * Added Bluetooth host support for periodic advertisement and isochronous channels. |
| * Added a new TCP stack which improves network protocol testability |
| * Introduced a new toolchain abstraction with initial support for GCC and LLVM/Clang |
| * Moved to using C99 integer types and deprecate Zephyr integer types |
| * Introduced support for the SPARC architecture and the LEON implementation |
| * Added Thread Local Storage (TLS) support |
| * Added support for per thread runtime statistics |
| * Added support for building with LLVM on X86 |
| * Added new synchronization mechanisms using Condition Variables |
| * Add support for demand paging, initial support on X86 |
| * Logging subsystem overhauled |
| * Added support for 64-bit ARCv3 |
| * Split ARM32 and ARM64, ARM64 is now a top-level architecture |
| * Added initial support for Arm v8.1-m and Cortex-M55 |
| * Removed legacy TCP stack support which was deprecated in 2.4 |
| * Tracing subsystem overhaul / added support for Percepio Tracealyzer |
| * Device runtime power management (PM) completely overhauled |
| * Automatic SPDX SBOM generation has been added to West |
| * Added an example standalone Zephyr application |
| |
| The following sections provide detailed lists of changes by component. |
| |
| Security Vulnerability Related |
| ****************************** |
| |
| The following CVEs are addressed by this release: |
| |
| More detailed information can be found in: |
| https://docs.zephyrproject.org/latest/security/vulnerabilities.html |
| |
| * CVE-2021-3510: `Zephyr project bug tracker GHSA-289f-7mw3-2qf4 |
| <https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-289f-7mw3-2qf4>`_. |
| |
| |
| Known issues |
| ************ |
| |
| You can check all currently known issues by listing them using the GitHub |
| interface and listing all issues with the `bug label |
| <https://github.com/zephyrproject-rtos/zephyr/issues?q=is%3Aissue+is%3Aopen+label%3Abug>`_. |
| |
| API Changes |
| *********** |
| |
| Deprecated in this release |
| |
| * :c:macro:`DT_ENUM_TOKEN` and :c:macro:`DT_ENUM_UPPER_TOKEN`, |
| were deprecated in favor of utilizing |
| :c:macro:`DT_STRING_TOKEN` and :c:macro:`DT_STRING_UPPER_TOKEN` |
| |
| * :c:macro:`BT_CONN_ROLE_MASTER` and :c:macro:`BT_CONN_ROLE_SLAVE` |
| have been deprecated in favor of |
| :c:macro:`BT_CONN_ROLE_CENTRAL` and :c:macro:`BT_CONN_ROLE_PERIPHERAL` |
| |
| * :c:macro:`BT_LE_SCAN_OPT_FILTER_WHITELIST` |
| has been deprecated in favor of |
| :c:macro:`BT_LE_SCAN_OPT_FILTER_ACCEPT_LIST` |
| |
| * The following whitelist functions have been deprecated: |
| :c:func:`bt_le_whitelist_add` |
| :c:func:`bt_le_whitelist_rem` |
| :c:func:`bt_le_whitelist_clear` |
| in favor of |
| :c:func:`bt_le_filter_accept_list_add` |
| :c:func:`bt_le_filter_accept_list_remove` |
| :c:func:`bt_le_filter_accept_list_clear` |
| |
| Modified in this release |
| |
| * The following Bluetooth macros and structures in :file:`hci.h` have been |
| modified to align with the inclusive naming in the v5.3 specification: |
| |
| * ``BT_LE_FEAT_BIT_SLAVE_FEAT_REQ`` is now ``BT_LE_FEAT_BIT_PER_INIT_FEAT_XCHG`` |
| * ``BT_LE_FEAT_BIT_CIS_MASTER`` is now ``BT_LE_FEAT_BIT_CIS_CENTRAL`` |
| * ``BT_LE_FEAT_BIT_CIS_SLAVE`` is now ``BT_LE_FEAT_BIT_CIS_PERIPHERAL`` |
| * ``BT_FEAT_LE_SLAVE_FEATURE_XCHG`` is now ``BT_FEAT_LE_PER_INIT_FEAT_XCHG`` |
| * ``BT_FEAT_LE_CIS_MASTER`` is now ``BT_FEAT_LE_CIS_CENTRAL`` |
| * ``BT_FEAT_LE_CIS_SLAVE`` is now ``BT_FEAT_LE_CIS_PERIPHERAL`` |
| * ``BT_LE_STATES_SLAVE_CONN_ADV`` is now ``BT_LE_STATES_PER_CONN_ADV`` |
| * ``BT_HCI_OP_LE_READ_WL_SIZE`` is now ``BT_HCI_OP_LE_READ_FAL_SIZE`` |
| * ``bt_hci_rp_le_read_wl_size`` is now ``bt_hci_rp_le_read_fal_size`` |
| * ``bt_hci_rp_le_read_wl_size::wl_size`` is now ``bt_hci_rp_le_read_fal_size::fal_size`` |
| * ``BT_HCI_OP_LE_CLEAR_WL`` is now ``BT_HCI_OP_LE_CLEAR_FAL`` |
| * ``BT_HCI_OP_LE_ADD_DEV_TO_WL`` is now ``BT_HCI_OP_LE_REM_DEV_FROM_FAL`` |
| * ``bt_hci_cp_le_add_dev_to_wl`` is now ``bt_hci_cp_le_add_dev_to_fal`` |
| * ``BT_HCI_OP_LE_REM_DEV_FROM_WL`` is now ``BT_HCI_OP_LE_REM_DEV_FROM_FAL`` |
| * ``bt_hci_cp_le_rem_dev_from_wl`` is now ``bt_hci_cp_le_rem_dev_from_fal`` |
| * ``BT_HCI_ROLE_MASTER`` is now ``BT_HCI_ROLE_CENTRAL`` |
| * ``BT_HCI_ROLE_SLAVE`` is now ``BT_HCI_ROLE_PERIPHERAL`` |
| * ``BT_EVT_MASK_CL_SLAVE_BC_RX`` is now ``BT_EVT_MASK_CL_PER_BC_RX`` |
| * ``BT_EVT_MASK_CL_SLAVE_BC_TIMEOUT`` is now ``BT_EVT_MASK_CL_PER_BC_TIMEOUT`` |
| * ``BT_EVT_MASK_SLAVE_PAGE_RSP_TIMEOUT`` is now ``BT_EVT_MASK_PER_PAGE_RSP_TIMEOUT`` |
| * ``BT_EVT_MASK_CL_SLAVE_BC_CH_MAP_CHANGE`` is now ``BT_EVT_MASK_CL_PER_BC_CH_MAP_CHANGE`` |
| * ``m_*`` structure members are now ``c_*`` |
| * ``s_*`` structure members are now ``p_*`` |
| |
| * The ``CONFIG_BT_PERIPHERAL_PREF_SLAVE_LATENCY`` Kconfig option is now |
| :kconfig:option:`CONFIG_BT_PERIPHERAL_PREF_LATENCY` |
| * The ``CONFIG_BT_CTLR_SLAVE_FEAT_REQ_SUPPORT`` Kconfig option is now |
| :kconfig:option:`CONFIG_BT_CTLR_PER_INIT_FEAT_XCHG_SUPPORT` |
| * The ``CONFIG_BT_CTLR_SLAVE_FEAT_REQ`` Kconfig option is now |
| :kconfig:option:`CONFIG_BT_CTLR_PER_INIT_FEAT_XCHG` |
| |
| Changes in this release |
| ========================== |
| |
| Removed APIs in this release |
| |
| * Removed support for the deprecated ``DEVICE_INIT`` and ``DEVICE_AND_API_INIT`` macros. |
| * Removed support for the deprecated ``BUILD_ASSERT_MSG`` macro. |
| * Removed support for the deprecated ``GET_ARG1``, ``GET_ARG2`` and ``GET_ARGS_LESS_1`` macros. |
| * Removed support for the deprecated Kconfig ``PRINTK64`` option. |
| * Removed support for the deprecated ``bt_set_id_addr`` function. |
| * Removed support for the Kconfig ``USB`` option. Option ``USB_DEVICE_STACK`` |
| is sufficient to enable USB device support. |
| |
| * Removed ``CONFIG_OPENTHREAD_COPROCESSOR_SPINEL_ON_UART_ACM`` and |
| ``CONFIG_OPENTHREAD_COPROCESSOR_SPINEL_ON_UART_DEV_NAME`` Kconfig options |
| in favor of chosen node ``zephyr,ot-uart``. |
| * Removed ``CONFIG_BT_UART_ON_DEV_NAME`` Kconfig option |
| in favor of direct use of chosen node ``zephyr,bt-uart``. |
| * Removed ``CONFIG_BT_MONITOR_ON_DEV_NAME`` Kconfig option |
| in favor of direct use of chosen node ``zephyr,bt-mon-uart``. |
| * Removed ``CONFIG_MODEM_GSM_UART_NAME`` Kconfig option |
| in favor of direct use of chosen node ``zephyr,gsm-ppp``. |
| * Removed ``CONFIG_UART_MCUMGR_ON_DEV_NAME`` Kconfig option |
| in favor of direct use of chosen node ``zephyr,uart-mcumgr``. |
| * Removed ``CONFIG_UART_CONSOLE_ON_DEV_NAME`` Kconfig option |
| in favor of direct use of chosen node ``zephyr,console``. |
| * Removed ``CONFIG_UART_SHELL_ON_DEV_NAME`` Kconfig option |
| in favor of direct use of chosen node ``zephyr,shell-uart``. |
| |
| ============================ |
| |
| Stable API changes in this release |
| ================================== |
| |
| * Bluetooth |
| |
| * Added :c:struct:`multiple` to the :c:struct:`bt_gatt_read_params` - this |
| structure contains two members: ``handles``, which was moved from |
| :c:struct:`bt_gatt_read_params`, and ``variable``. |
| |
| * Networking |
| |
| * Added IPv4 address support to the multicast group join/leave monitor. The |
| address parameter passed to the callback function was therefore changed from |
| ``in6_addr`` to ``net_addr`` type. |
| |
| Kernel |
| ****** |
| |
| |
| Architectures |
| ************* |
| |
| * ARC |
| |
| * Add SMP support to ARCv3 HS6x |
| * Add MWDT C library support |
| * Add basic C++ support with MWDT toolchain |
| * Add MPUv3 and MPUv6 support |
| * Remove dead PM code from ARC core interrupt controller driver |
| * Add updating arc connect debug mask dynamically |
| |
| |
| * ARM |
| |
| * AARCH32 |
| |
| * Updated CMSIS version to 5.8.0 |
| * Added support for FPU in QEMU for Cortex-M, allowing to build and execute |
| tests in CI with FPU and FPU_SHARING options enabled. |
| * Added MPU support for Cortex-R |
| |
| |
| * AARCH64 |
| |
| |
| * RISC-V |
| |
| * Added support to RISC-V CPU devicetree compatible bindings |
| * Added support to link with ITCM & DTCM sections |
| |
| |
| * x86 |
| |
| |
| Bluetooth |
| ********* |
| |
| * Updated all APIs and internal implementation to be conformant with the new |
| inclusive terminology in version 5.3 of the Bluetooth Core Specification |
| |
| * Audio |
| |
| * Added the Microphone Input Control Service and client. |
| * Changed the connected isochronous API to use a group-based opaque struct |
| * Split the configuration options into connected and broadcast groups |
| * Added support for a new sent callback to be notified when an SDU has been |
| transmitted |
| |
| * Direction Finding |
| |
| * Added configurability for conditional CTE RX support |
| * Added support for CTE periodic advertising chain transmissions |
| |
| * Host |
| |
| * Added support for setting more than 251 bytes of advertising data |
| * Added new callbacks on ATT MTU update |
| * Added a new call to retrieve the handle of an advertising set |
| * Fixed key overwrite algorithm when working with multiple connections |
| * Added configuration support for GATT security re-establishment |
| * Added support for writing a long device name |
| * OTS: Added object name write capability |
| |
| * Mesh |
| |
| * Added return value for opcode callback |
| * Added support for OOB Public Key in the provisionee role |
| * Added a new API to manually store pending RPL entries |
| * Added support for application access to mesh messages |
| * Refactored the Mesh Model Extensions |
| |
| * Bluetooth LE split software Controller |
| |
| * Added support for advertising PDU chaining, implementing advertising trains |
| for Direction Finding |
| * Added support for adding or removing the ACAD field in Common Extended |
| Header Format to support BIGInfo |
| * Refactored the legacy, extended and periodic advertising time reservation |
| slot calculations |
| * Implemented CSA#2 in Extended Advertising and Broadcast ISO sub-events |
| * Added support for Extended Active Scanning |
| * Added support for advertising on the S2 and S8 coding schemes |
| * Added support for the Periodic Advertising channel map update indication |
| |
| * HCI Driver |
| |
| * Removed all ``CONFIG_BT_*_ON_DEV_NAME`` Kconfig options, use Devicetree |
| instead |
| |
| Boards & SoC Support |
| ******************** |
| |
| * Added support for these SoC series: |
| |
| * Added STM32U5 basic SoC support |
| |
| * Removed support for these SoC series: |
| |
| |
| * Made these changes in other SoC series: |
| |
| * Added Atmel SAM0 pinctrl support |
| * Added Atmel SAM4L USBC device controller |
| * Added Atmel GMAC support for MDIO driver |
| * Added Atmel GMAC support to use generic PHY driver |
| * Added Atmel SAM counter (TC) Driver |
| * Added Atmel SAM DAC (DACC) driver |
| * Enabled Atmel SAM ``clock-frequency`` support from devicetree |
| * Free Atmel SAM TRACESWO pin when unused |
| * Enabled Cypress PSoC-6 Cortex-M4 support |
| * Added low power support to STM32L0, STM32G0 and STM32WL series |
| * STM32: Enabled ART Flash accelerator by default when available (F2, F4, F7, H7, L5) |
| * STM32: Added Kconfig option to enable STM32Cube asserts (CONFIG_USE_STM32_ASSERT) |
| * NXP FRDM-K82F: Added arduino_i2c and arduino_spi aliases |
| * NXP i.MX RT series: Added support for flash controller with XIP |
| * NXP i.MX RT series: Added TRNG support |
| * NXP i.MX RT1170: Added LPSPI driver support |
| * NXP i.MX RT1170: Added ADC driver support |
| * NXP i.MX RT1170: Enabled Segger RTT/SystemView |
| * NXP i.MX RT1170: Added MCUX FlexCan support |
| * NXP i.MX RT1064: Added watchdog driver support |
| * NXP i.MX RT1064: Added DMA driver support |
| * NXP i.MX RT600: Added arduino serial port |
| * NXP i.MX RT600: Add mcuboot flash partitions |
| * NXP i.MX RT600: Added counter support |
| * NXP i.MX RT600: Added PWM support |
| * NXP i.MX RT600: Added disk driver support |
| * NXP i.MX RT600: Added USB driver support |
| * NXP i.MX RT600: Added LPADC driver support |
| * NXP i.MX RT600: Added CTimer Counter support |
| * NXP KE1xF: Added SoC Power Management support |
| * NXP LPC55s69: Added USB driver support |
| * NXP LPC55s69: Added ctimer driver support |
| * NXP LPC55s69: Added I2S driver support |
| |
| |
| * Changes for ARC boards: |
| |
| * Implement 'run' command for SMP nSIM simulation board |
| * Enable upstream verification on QEMU ARCv3 HS6x board (qemu_arc_hs6x) |
| * Implement creg GPIO driver and add it to hsdk and em_starterkit boards |
| |
| |
| * Changes for ARM boards: |
| |
| * Added SPI support on Arduino standard SPI when possible |
| |
| * Added support for these ARM boards: |
| |
| * Dragino NBSN95 NB-IoT Sensor Node |
| * Seeedstudio LoRa-E5 Dev Board |
| * ST B_U585I_IOT02A Discovery kit |
| * ST Nucleo F446ZE |
| * ST Nucleo U575ZI Q |
| * ST STM32H735G Discovery |
| * PJRC Teensy 4 Board |
| |
| * Added support for these ARM64 boards: |
| |
| |
| * Removed support for these ARM boards: |
| |
| |
| * Removed support for these X86 boards: |
| |
| |
| * Made these changes in other boards: |
| |
| * arduino_due: Added support for TC driver |
| * atsame54_xpro: Added support for PHY driver |
| * sam4l_ek: Added support for TC driver |
| * sam4e_xpro: Added support for PHY driver |
| * sam4e_xpro: Added support for TC driver |
| * sam4s_xplained: Added support for TC driver |
| * sam_e70_xplained: Added support for DACC driver |
| * sam_e70_xplained: Added support for PHY driver |
| * sam_e70_xplained: Added support for TC driver |
| * sam_v71_xult: Added support for DACC driver |
| * sam_v71_xult: Added support for PHY driver |
| * sam_v71_xult: Added support for TC driver |
| * sam_v71_xult: Enable pwm on LED0 |
| * cy8ckit_062_ble: Added arduino's nexus map |
| |
| |
| * Added support for these following shields: |
| |
| * 4.2inch epaper display (GDEW042T2) |
| * X-NUCLEO-EEPRMA2 EEPROM memory expansion board |
| |
| Drivers and Sensors |
| ******************* |
| |
| * ADC |
| |
| * Added STM32WL ADC driver |
| * STM32: Added support for oversampling |
| * Added driver for Microchip MEC172x |
| |
| * Audio |
| |
| * Added DMIC driver for nRF PDM peripherals |
| |
| * Bluetooth |
| |
| |
| * CAN |
| |
| * Renesas R-Car driver added |
| |
| |
| * Clock Control |
| |
| |
| * Console |
| |
| |
| * Counter |
| |
| * Add Atmel SAM counter (TC) Driver |
| * Added STM32WL RTC counter driver |
| |
| * Crypto |
| |
| * STM23: Add support for SOCs with AES hardware block (STM32G0, STM32L5 and STM32WL) |
| |
| * DAC |
| |
| * Added Atmel SAM DAC (DACC) driver |
| * Added support for Microchip MCP4725 |
| * Added support for STM32F3 series |
| |
| * Disk |
| |
| * Added SDMMC support on STM32L4+ |
| * STM32 SDMMC now supports SDIO enabled devices |
| * Added USDHC support for i.MX RT685 |
| |
| * Display |
| |
| * Added support for ST7735R |
| |
| * DMA |
| |
| * Added Atmel SAM XDMAC reload support |
| * Added support on STM32F3, STM32G0, STM32H7 and STM32L5 |
| * STM32: Reviewed bindings definitions, "st,stm32-dma-v2bis" introduced. |
| |
| |
| * EEPROM |
| |
| * Added support for EEPROM emulated in flash. |
| |
| * Entropy |
| |
| * Added support for STM32F2, STM32G0, STM32WB and STM32WL |
| |
| * ESPI |
| |
| * Added support for Microchip eSPI SAF |
| |
| * Ethernet |
| |
| * Added Atmel SAM/SAM0 GMAC devicetree support |
| * Added Atmel SAM/SAM0 MDIO driver |
| * Added MDIO driver |
| * Added generic PHY driver |
| |
| |
| * Flash |
| |
| * Added STM32F2, STM32L5 and STM32WL Flash driver support |
| * STM32: Max erase time parameter was moved to device tree |
| * Added quad SPI support for STM32F4 |
| |
| * GPIO |
| |
| |
| * Hardware Info |
| |
| |
| * I2C |
| |
| |
| * I2S |
| |
| * Added Atmel SAM I2S driver support to XDMAC reload |
| * Added driver for nRF I2S peripherals |
| |
| * IEEE 802.15.4 |
| |
| * IPM |
| |
| * STM32: Add HSEM based IPM driver for STM32H7 series |
| |
| * Interrupt Controller |
| |
| |
| * LED |
| |
| |
| * LoRa |
| |
| * lora_send now blocks until the transmission is complete. lora_send_async |
| can be used for the previous, non-blocking behaviour. |
| * Enabled support for STM32WL series |
| |
| * MEMC |
| |
| * Added STM32F4 support |
| |
| |
| * Modem |
| |
| * Added gsm_ppp devicetree support |
| |
| * PCI/PCIe |
| |
| * Fixed an issue that MSI-X was used even though it is not available. |
| * Improved MBAR retrieval for MSI-X. |
| * Added ability to retrieve extended PCI/PCIe capabilities. |
| |
| * Pinmux |
| |
| * Added Atmel SAM0 pinctrl support |
| * STM32: Deprecated definitions like 'STM32F2_PINMUX_FUNC_PA0_UART4_TX' |
| are now removed. |
| |
| |
| * PWM |
| |
| * Property "st,prescaler" of binding "st,stm32-pwm" now defaults to "0". |
| * Added driver for ITE IT8XXX2 series |
| * Added driver for NXP LPC devices |
| * Added driver for Telink B91 |
| |
| * Sensor |
| |
| * Refactored various drivers to use ``_dt_spec``. |
| * Refactored various drivers to support multiple instances. |
| * Enhanced TI HDC20XX driver to support DRDY/INT pin. |
| * Updated temperature conversion formula in TI HDC20XX driver. |
| * Enhanced MS5607 pressure sensor driver to support I2C. |
| * Fixed temperature compensation in MS5607 pressure sensor driver. |
| * Refactored ST LIS2DW12 driver to move range, power, and trigger |
| configuration from Kconfig to dts. |
| * Enhanced TI BQ274XX fuel gauge driver to support power management. |
| * Aligned ST sensor drivers to use STMEMC HAL I/F v2.00. |
| * Added Sensirion SGP40 multipixel gas sensor driver. |
| * Added Sensirion SHTCX humidity sensor driver. |
| * Added Sensirion SHT4X temperature and humidity sensor driver. |
| * Added SiLabs SI7270 hall effect magnetic position and temperature sensor |
| driver. |
| * Added ST I3G4250D gyroscope driver. |
| * Added TI INA219 and INA23X current/power monitor drivers. |
| * Added TI LM75 and LM77 temperature sensor drivers. |
| * Added TI HDC20XX humidity and temperature sensor driver. |
| |
| * Serial |
| |
| * Added kconfig to disable runtime re-configuration of UART |
| to reduce footprint if so desired. |
| * Added ESP32-C3 polling only UART driver. |
| * Added ESP32-S2 polling only UART driver. |
| * Added Microchip XEC UART driver. |
| |
| * SPI |
| |
| |
| * Timer |
| |
| |
| * USB |
| |
| * Added Atmel SAM4L USBC device controller driver |
| * Added support for NXP LPC USB controller |
| * Adapted drivers use new USB framework header |
| |
| * Watchdog |
| |
| * Added STM32L5 watchdog support |
| |
| |
| * WiFi |
| |
| |
| Networking |
| ********** |
| |
| * 802.15.4 L2: |
| |
| * Fixed a bug, where the net_pkt structure contained invalid LL address |
| pointers after being processed by 802.15.4 L2. |
| * Added an optional destination address filtering in the 802.15.4 L2. |
| |
| * CoAP: |
| |
| * Added ``user_data`` field to the :c:struct:`coap_packet` structure. |
| * Fixed processing of out-of-order notifications. |
| * Fixed :c:func:`coap_packet_get_payload` function. |
| * Converted CoAP test suite to ztest API. |
| * Improved :c:func:`coap_packet_get_payload` function to minimize number |
| of RNG calls. |
| * Fixed retransmissions in the ``coap_server`` sample. |
| * Fixed observer removal in the ``coap_server`` sample (on notification |
| timeout). |
| |
| * DHCPv4: |
| |
| * Fixed a bug, where DHPCv4 library removed statically configured gateway |
| before obtaining a new one from the server. |
| |
| * DNS: |
| |
| * Fixed a bug, where the same IP address was used to populate the result |
| address info entries, when multiple IP addresses were obtained from the |
| server. |
| |
| * DNS-SD: |
| |
| * Added Service Type Enumeration support (``_services._dns_sd._udp.local``) |
| |
| * HTTP: |
| |
| * Switched the library to use ``zsock_*`` API, to improve compatibility with |
| various POSIX configurations. |
| * Fixed a bug, where ``HTTP_DATA_FINAL`` notification was triggered even for |
| intermediate response fragments. |
| |
| * IPv6: |
| |
| * Multiple IPv6 fixes, addressing failures in IPv6Ready compliance tests. |
| |
| * LwM2M: |
| |
| * Added support for notification timeout reporting to the application. |
| * Fixed a bug, where a multi instance resource with only one active instance |
| was incorrectly encoded on reads. |
| * Fixed a bug, where notifications were generated on changes to non-readable |
| resources. |
| * Added mutex protection for the state variable of the ``lwm2m_rd_client`` |
| module. |
| * Removed LWM2M_RES_TYPE_U64 type, as it's not possible to encode it properly |
| for large values. |
| * Fixed a bug, where large unsigned integers were incorrectly encoded in TLV. |
| * Multiple fixes for FLOAT type processing in the LwM2M engine and encoders. |
| * Fix a bug, where IPSO Push Button counter resource was not triggering |
| notification on incrementation. |
| * Fixed a bug, where Register failures were reported as success to the |
| application. |
| |
| * Misc: |
| |
| * Added RX/TX timeout on a socket in ``big_http_download`` sample. |
| * Introduced :c:func:`net_pkt_remove_tail` function. |
| Added IEEE 802.15.4 security-related flags to the :c:struct:`net_pkt` |
| structure. |
| * Added bridging support to the Ethernet L2. |
| * Fixed a bug in mDNS, where an incorrect address type could be set as a |
| response destination. |
| * Added an option to suppress ICMP destination unreachable errors. |
| * Fixed possible assertion in ``net nbr`` shell command. |
| * Major refactoring of the TFTP library. |
| |
| * MQTT: |
| |
| * Added an option to register a custom transport type. |
| * Fixed a bug in :c:func:`mqtt_abort`, where the function could return without |
| releasing a lock. |
| |
| * OpenThread: |
| |
| * Update OpenThread module up to commit ``9ea34d1e2053b6b2a80e1d46b65a6aee99fc504a``. |
| Added several new Kconfig options to align with new OpenThread |
| configurations. |
| * Added OpenThread API mutex protection during initialization. |
| * Converted OpenThread thread to a dedicated work queue. |
| * Implemented missing :c:func:`otPlatAssertFail` platform function. |
| * Fixed a bug, where NONE level OpenThread logs were not processed. |
| * Added possibility to disable CSL sampling, when used. |
| * Fixed a potential bug, where invalid error code could be returned by the |
| platform radio layer to OpenThread. |
| * Reworked UART configuration in the OpenThread Coprocessor sample. |
| |
| * Socket: |
| |
| * Added microsecond accuracy in :c:func:`zsock_select` function. |
| * Reworked :c:func:`zsock_select` into a syscall. |
| * Fixed a bug, where :c:func:`poll` events were not signalled correctly |
| for socketpair sockets. |
| * Fixed a bug, where socket mutex could be used after being initialized by a |
| new owner after being deallocated in :c:func:`zsock_close`. |
| * Fixed a possible assert after enabling CAN sockets. |
| * Fixed IPPROTO_RAW usage in packet socket implementation. |
| |
| * TCP: |
| |
| * Fixed a bug, where ``unacked_len`` could be set to a negative value. |
| * Fixed possible assertion failure in :c:func:`tcp_send_data`. |
| * Fixed a bug, where [FIN, PSH, ACK] was not handled properly in |
| TCP_FIN_WAIT_2 state. |
| |
| * TLS: |
| |
| * Reworked TLS sockets to use secure random generator from Zephyr. |
| * Fixed busy looping during DTLS handshake with offloaded sockets. |
| * Fixed busy looping during TLS/DTLS handshake on non blocking sockets. |
| * Reset mbed TLS session on timed out DTLS handshake, to allow a retry without |
| closing a socket. |
| * Fixed TLS/DTLS :c:func:`sendmsg` implementation for larger payloads. |
| * Fixed TLS/DTLS sockets ``POLLHUP`` notification. |
| |
| * WebSocket: |
| |
| * Fixed :c:func:`poll` implementation for WebSocket, which did not work |
| correctly with offloaded sockets. |
| * Fixed :c:func:`ioctl` implementation for WebSocket, which did not work |
| correctly with offloaded sockets. |
| |
| USB |
| *** |
| |
| * Added new header file where all defines and structures from Chapter 9 |
| (USB Device Framework) should be included. |
| * Revised configuraiton of USB device support. |
| Removed Kconfig option ``CONFIG_USB`` and introduced Kconfig option |
| ``CONFIG_USB_DEVICE_DRIVER`` to enable USB device controller drivers, |
| which is selected when option ``CONFIG_USB_DEVICE_STACK`` is enabled. |
| * Enhanced verification of the control request in device stack, classes, and samples. |
| * Added support to store alternate interface setting. |
| * Added ``zephyr_udc0`` nodelabel to all boards with USB support to allow |
| generic USB device support samples to be build. |
| * Reworked descriptors, config, and data definitions macros in CDC ACM class. |
| * Changed CDC ACM UART implementation to get configuration from devicetree. |
| With this change, many ``CONFIG_*_ON_DEV_NAME`` options were removed and |
| applications revised. See :ref:`usb_device_cdc_acm` for more information. |
| |
| Build and Infrastructure |
| ************************ |
| |
| * Devicetree API |
| |
| * New "for-each" macros which work like existing APIs, but take variable |
| numbers of arguments: :c:macro:`DT_FOREACH_CHILD_VARGS`, |
| :c:macro:`DT_FOREACH_CHILD_STATUS_OKAY_VARGS`, |
| :c:macro:`DT_FOREACH_PROP_ELEM_VARGS`, |
| :c:macro:`DT_INST_FOREACH_CHILD_VARGS`, |
| :c:macro:`DT_INST_FOREACH_STATUS_OKAY_VARGS`, |
| :c:macro:`DT_INST_FOREACH_PROP_ELEM_VARGS` |
| |
| * Other new "for-each" macros: :c:macro:`DT_FOREACH_STATUS_OKAY`, |
| :c:macro:`DT_FOREACH_STATUS_OKAY_VARGS` |
| |
| * New macros for converting strings to C tokens: :c:macro:`DT_STRING_TOKEN`, |
| :c:macro:`DT_STRING_UPPER_TOKEN` |
| |
| * New :ref:`devicetree-pinctrl-api` helper macros |
| |
| * Devicetree tooling |
| |
| * Errors are now generated when invalid YAML files are discovered while |
| searching for bindings. See :ref:`dt-where-bindings-are-located` for |
| information on the search path. |
| |
| * File names ending in ``.yml`` are now considered YAML files when searching |
| for bindings. |
| |
| * Errors are now generated if invalid node names are used. For example, the |
| node name ``node?`` now generates an error message ending in ``node?: Bad |
| character '?' in node name``. The valid node names are documented in |
| "2.2.2 Node Names" of the Devicetree specification v0.3. |
| |
| * Warnings are now generated if a :ref:`compatible property |
| <dt-important-props>` in the ``vendor,device`` format uses an unknown |
| vendor prefix. This warning does not apply to the root node. |
| |
| Known vendor prefixes are defined in |
| :file:`dts/bindings/vendor-prefixes.txt` files, which may appear in any |
| directory in :ref:`DTS_ROOT <dts_root>`. |
| |
| These may be upgraded to errors using the edtlib Python APIs; Zephyr's CI |
| now generates such errors. |
| |
| * Devicetree bindings |
| |
| * Various bindings had incorrect vendor prefixes in their :ref:`compatible |
| <dt-important-props>` properties; the following changes were made to fix |
| these. |
| |
| .. list-table:: |
| :header-rows: 1 |
| |
| - * Old compatible |
| * New compatible |
| - * ``nios,i2c`` |
| * :dtcompatible:`altr,nios2-i2c` |
| - * ``cadence,tensilica-xtensa-lx4`` |
| * :dtcompatible:`cdns,tensilica-xtensa-lx4` |
| - * ``cadence,tensilica-xtensa-lx6`` |
| * :dtcompatible:`cdns,tensilica-xtensa-lx6` |
| - * ``colorway,lpd8803`` |
| * :dtcompatible:`greeled,lpd8803` |
| - * ``colorway,lpd8806`` |
| * :dtcompatible:`greeled,lpd8806` |
| - * ``grove,light`` |
| * :dtcompatible:`seeed,grove-light` |
| - * ``grove,temperature`` |
| * :dtcompatible:`seeed,grove-temperature` |
| - * ``max,max30101`` |
| * :dtcompatible:`maxim,max30101` |
| - * ``ublox,sara-r4`` |
| * :dtcompatible:`u-blox,sara-r4` |
| - * ``xtensa,core-intc`` |
| * :dtcompatible:`cdns,xtensa-core-intc` |
| - * ``vexriscv,intc0`` |
| * :dtcompatible:`vexriscv-intc0` |
| |
| Out of tree users of these bindings will need to update their |
| devicetrees. |
| |
| You can support multiple versions of Zephyr with one devicetree by |
| including both the old and new values in your nodes' compatible properties, |
| like this example for the LPD8803:: |
| |
| my-led-strip@0 { |
| compatible = "colorway,lpd8803", "greeled,lpd8803"; |
| ... |
| }; |
| |
| * Other new bindings in alphabetical order: :dtcompatible:`andestech,atcgpio100`, |
| :dtcompatible:`arm,gic-v3-its`, :dtcompatible:`atmel,sam0-gmac`, |
| :dtcompatible:`atmel,sam0-pinctrl`, :dtcompatible:`atmel,sam-dac`, |
| :dtcompatible:`atmel,sam-mdio`, :dtcompatible:`atmel,sam-usbc`, |
| :dtcompatible:`cdns,tensilica-xtensa-lx7`, |
| :dtcompatible:`espressif,esp32c3-uart`, |
| :dtcompatible:`espressif,esp32-intc`, |
| :dtcompatible:`espressif,esp32s2-uart`, :dtcompatible:`ethernet-phy`, |
| :dtcompatible:`fcs,fxl6408`, :dtcompatible:`ilitek,ili9341`, |
| :dtcompatible:`ite,it8xxx2-bbram`, :dtcompatible:`ite,it8xxx2-kscan`, |
| :dtcompatible:`ite,it8xxx2-pinctrl-conf`, :dtcompatible:`ite,it8xxx2-pwm`, |
| :dtcompatible:`ite,it8xxx2-pwmprs`, :dtcompatible:`ite,it8xxx2-watchdog`, |
| :dtcompatible:`lm75`, :dtcompatible:`lm77`, :dtcompatible:`meas,ms5607`, |
| :dtcompatible:`microchip,ksz8863`, :dtcompatible:`microchip,mcp7940n`, |
| :dtcompatible:`microchip,xec-adc-v2`, :dtcompatible:`microchip,xec-ecia`, |
| :dtcompatible:`microchip,xec-ecia-girq`, |
| :dtcompatible:`microchip,xec-gpio-v2`, |
| :dtcompatible:`microchip,xec-i2c-v2`, :dtcompatible:`microchip,xec-pcr`, |
| :dtcompatible:`microchip,xec-uart`, :dtcompatible:`nuvoton,npcx-bbram`, |
| :dtcompatible:`nuvoton,npcx-booter-variant`, |
| :dtcompatible:`nuvoton,npcx-ps2-channel`, |
| :dtcompatible:`nuvoton,npcx-ps2-ctrl`, :dtcompatible:`nuvoton,npcx-soc-id`, |
| :dtcompatible:`nxp,imx-ccm-rev2`, :dtcompatible:`nxp,lpc-ctimer`, |
| :dtcompatible:`nxp,lpc-uid`, :dtcompatible:`nxp,mcux-usbd`, |
| :dtcompatible:`nxp,sctimer-pwm`, :dtcompatible:`ovti,ov2640`, |
| :dtcompatible:`renesas,rcar-can`, :dtcompatible:`renesas,rcar-i2c`, |
| :dtcompatible:`reserved-memory`, :dtcompatible:`riscv,sifive-e24`, |
| :dtcompatible:`sensirion,sgp40`, :dtcompatible:`sensirion,sht4x`, |
| :dtcompatible:`sensirion,shtcx`, :dtcompatible:`silabs,si7055`, |
| :dtcompatible:`silabs,si7210`, :dtcompatible:`snps,creg-gpio`, |
| :dtcompatible:`st,i3g4250d`, :dtcompatible:`st,stm32-aes`, |
| :dtcompatible:`st,stm32-dma`, :dtcompatible:`st,stm32-dma-v2bis`, |
| :dtcompatible:`st,stm32-hsem-mailbox`, :dtcompatible:`st,stm32-nv-flash`, |
| :dtcompatible:`st,stm32-spi-subghz`, |
| :dtcompatible:`st,stm32u5-flash-controller`, |
| :dtcompatible:`st,stm32u5-msi-clock`, :dtcompatible:`st,stm32u5-pll-clock`, |
| :dtcompatible:`st,stm32u5-rcc`, :dtcompatible:`st,stm32wl-hse-clock`, |
| :dtcompatible:`st,stm32wl-subghz-radio`, :dtcompatible:`st,stmpe1600`, |
| :dtcompatible:`syscon`, :dtcompatible:`telink,b91`, |
| :dtcompatible:`telink,b91-flash-controller`, |
| :dtcompatible:`telink,b91-gpio`, :dtcompatible:`telink,b91-i2c`, |
| :dtcompatible:`telink,b91-pinmux`, :dtcompatible:`telink,b91-power`, |
| :dtcompatible:`telink,b91-pwm`, :dtcompatible:`telink,b91-spi`, |
| :dtcompatible:`telink,b91-trng`, :dtcompatible:`telink,b91-uart`, |
| :dtcompatible:`telink,b91-zb`, :dtcompatible:`ti,hdc2010`, |
| :dtcompatible:`ti,hdc2021`, :dtcompatible:`ti,hdc2022`, |
| :dtcompatible:`ti,hdc2080`, :dtcompatible:`ti,hdc20xx`, |
| :dtcompatible:`ti,ina219`, :dtcompatible:`ti,ina23x`, |
| :dtcompatible:`ti,tca9538`, :dtcompatible:`ti,tca9546a`, |
| :dtcompatible:`ti,tlc59108`, |
| :dtcompatible:`xlnx,gem`, :dtcompatible:`zephyr,bbram-emul`, |
| :dtcompatible:`zephyr,cdc-acm-uart`, :dtcompatible:`zephyr,gsm-ppp`, |
| :dtcompatible:`zephyr,native-posix-udc` |
| |
| * West (extensions) |
| |
| * openocd runner: Zephyr thread awareness is now available in GDB by default |
| for application builds with :kconfig:option:`CONFIG_DEBUG_THREAD_INFO` set to ``y`` |
| in :ref:`kconfig`. This applies to ``west debug``, ``west debugserver``, |
| and ``west attach``. OpenOCD version later than 0.11.0 must be installed |
| on the host system. |
| |
| |
| Libraries / Subsystems |
| ********************** |
| |
| * Disk |
| |
| |
| * Management |
| |
| |
| * CMSIS subsystem |
| |
| |
| * Power management |
| |
| * The APIs to set/clear/check if devices are busy from a power management |
| perspective have been moved to the PM subsystem. Their naming and signature |
| has also been adjusted to follow common conventions. Below you can find the |
| equivalence list. |
| |
| * ``device_busy_set`` -> ``pm_device_busy_set`` |
| * ``device_busy_clear`` -> ``pm_device_busy_clear`` |
| * ``device_busy_check`` -> ``pm_device_is_busy`` |
| * ``device_any_busy_check`` -> ``pm_device_is_any_busy`` |
| |
| * The device power management callback (``pm_device_control_callback_t``) has |
| been largely simplified to work based on *actions*, resulting in simpler and |
| more natural implementations. This principle is also used by other OSes like |
| the Linux Kernel. As a result, the callback argument list has been reduced |
| to the device instance and an action (e.g. ``PM_DEVICE_ACTION_RESUME``). |
| Other improvements include specification of error codes, removal of some |
| unused/unclear states, or guarantees such as avoid calling a device for |
| suspend/resume if it is already at the right state. All these changes |
| together have allowed simplifying multiple device power management callback |
| implementations. |
| |
| * Introduced a new API to allow devices capable of wake up the system |
| register themselves was wake up sources. This permits applications to |
| select the most appropriate way to wake up the system when it is |
| suspended. Devices marked as wake up source are not suspended by the kernel |
| when the system is idle. It is possible to declare a device wake up capable |
| direct in devicetree like this example:: |
| |
| &gpio0 { |
| compatible = "zephyr,gpio-emul"; |
| gpio-controller; |
| wakeup-source; |
| }; |
| |
| * Removed ``PM_DEVICE_STATE_FORCE_SUSPEND`` device power state.because it |
| is an action and not a state. |
| |
| * Removed ``PM_DEVICE_STATE_RESUMING`` and ``PM_DEVICE_STATE_SUSPENDING``. |
| They were transitional states and only used in device runtime. Now the |
| subsystem is using device flag to keep track of a transition. |
| |
| * Implement constraint API as weak symbols so applications or platform |
| can override them. Platforms can have their own way to |
| set/release constraints in their drivers that are not part of |
| Zephyr code base. |
| |
| |
| * Logging |
| |
| * MODBUS |
| |
| * Changed server handler to copy Transaction and Protocol Identifiers |
| to response header. |
| |
| * Random |
| |
| * xoroshiro128+ PRNG deprecated in favor of xoshiro128++ |
| |
| * Shell |
| |
| |
| * Storage |
| |
| |
| * Task Watchdog |
| |
| |
| * Tracing |
| |
| |
| * Debug |
| |
| * OS |
| |
| |
| HALs |
| **** |
| |
| * HALs are now moved out of the main tree as external modules and reside in |
| their own standalone repositories. |
| |
| |
| Trusted Firmware-m |
| ****************** |
| |
| * Renamed psa_level_1 sample to psa_crypto. Extended the use of the PSA Cryptography |
| 1.0 API in the sample code to demonstrate additional crypto functionality. |
| * Added a new sample to showcase the PSA Protecter Storage service. |
| |
| Documentation |
| ************* |
| |
| * Kconfig options need to be referenced using the ``:kconfig:option:`` Sphinx role. |
| Previous to this change, ``:option:`` was used for this purpose. |
| * Doxygen alias ``@config{}`` has been deprecated in favor of ``@kconfig{}``. |
| |
| Tests and Samples |
| ***************** |
| |
| |
| Issue Related Items |
| ******************* |
| |
| These GitHub issues were addressed since the previous 2.6.0 tagged |
| release: |
| |
| * :github:`39443` - Be more inclusive |
| * :github:`39419` - STM32WL55 not found st/wl/stm32wl55jcix-pinctrl.dtsi |
| * :github:`39413` - warnings when using newlibc and threads |
| * :github:`39409` - runners: canopen: program download fails with slow flash access and/or congested CAN nets |
| * :github:`39389` - http_get, big_http_download samples fails to build |
| * :github:`39388` - GSM Modem sample fails to build |
| * :github:`39378` - Garbage IQ Data Reports are generated if some check in hci_df_prepare_connectionless_iq_report fails |
| * :github:`39294` - noticing stm32 clock domain naming changes |
| * :github:`39291` - Bluetooth: Periodic advertising |
| * :github:`39284` - mdns + dns_sd: fix regression that breaks ptr queries |
| * :github:`39281` - Undefined references to k_thread_abort related tracing routines |
| * :github:`39270` - example-application CI build fails |
| * :github:`39263` - Bluetooth: controller: DF: wrong handling of max_cte_count |
| * :github:`39260` - [backport v2.7-branch] backport of #38292 failed |
| * :github:`39240` - ARC Kconfig allows so select IRQ configuration which isn't supported in SW |
| * :github:`39206` - lwm2m: send_attempts field does not seem to be used? |
| * :github:`39205` - drivers: wifi: esp_at: cannot connect to open (unsecure) WiFi networks |
| * :github:`39195` - USB: netusb: example echo_server not working as expected |
| * :github:`39190` - tests/subsys/logging/log_core_additional/logging.add.log2 fails |
| * :github:`39188` - tests/bluetooth/mesh/bluetooth.mesh.ext_adv fails |
| * :github:`39185` - tests/subsys/logging/log_core_additional/logging.add.user fails on several platforms |
| * :github:`39180` - samples/subsys/mgmt/osdp/peripheral_device & samples/subsys/mgmt/osdp/control_panel fail to build |
| * :github:`39170` - Can not run correctly on NXP MIMXRT1061 CVL5A. |
| * :github:`39135` - samples/compression/lz4 build failed (lz4.h: No such file or directory) |
| * :github:`39132` - subsys/net/ip/tcp2: Missing feature to decrease Receive Window size sent in the ACK messge |
| * :github:`39123` - ztest: Broken on NRF52840 Platform |
| * :github:`39115` - sensor: fdc2x1x: warnings and compilation errors when PM_DEVICE is used |
| * :github:`39086` - CMake warning during build - depracated roule CMP0079 |
| * :github:`39085` - Ordering of device_map() breaks PCIe config space mapping on ARM64 |
| * :github:`39075` - IPv6 address not set on loopback interface |
| * :github:`39051` - Zephyr was unable to find the toolchain. Is the environment misconfigured? |
| * :github:`39036` - Multicast packet forwarding not working for the coap_server sample and Openthread |
| * :github:`39022` - [backport v2.7-branch] backport of #38834 failed |
| * :github:`39011` - Bluetooth: Mesh: Model extensions walk stops before last model |
| * :github:`39009` - Nordic PWM causing lock up due to infinte loop |
| * :github:`39008` - tests: logging.add.user: build failure on STM32H7 targets |
| * :github:`38999` - [backport v2.7-branch] backport of #38407 failed |
| * :github:`38996` - There is no way to leave a ipv6 multicast group |
| * :github:`38994` - ARP: Replies are sent to multicast MAC address rather than senders MAC address. |
| * :github:`38970` - LWM2M Client Sample with DTLS enabled fail to connect |
| * :github:`38966` - Please add STM32F412VX |
| * :github:`38961` - tests: kernel: sched: schedule_api: instable on disco_l475_iot1 |
| * :github:`38959` - ITE RISCV I2C driver returning positive values for error instead of negative values |
| * :github:`38943` - west: update hal_espressif failure |
| * :github:`38938` - Bluetooth tester application should be able return L2CAP ECFC credits on demand |
| * :github:`38930` - Low Power mode not functional on nucleo_l073rz |
| * :github:`38924` - twister: cmake: Misleading error in Twister when sdk-zephyr 0.13.1 not used |
| * :github:`38904` - [backport v2.7-branch] backport of #38860 failed |
| * :github:`38902` - i2c_nrfx_twim: Error 0x0BAE0002 if sensor is set in trigger mode and reset with nrf device |
| * :github:`38899` - There is no valid date setting function in the RTC driver of the LL Library of STM32 |
| * :github:`38893` - g0b1re + spi_flash_at45 + flash_shell: First write always fails with ``CONFIG_PM_DEVICE`` |
| * :github:`38886` - devicetree/memory.h probably should not exist as-is |
| * :github:`38877` - Running the zephyr elf natively on an arm a53 machine (ThunderX2) with KVM emulation |
| * :github:`38870` - stm32f1: Button callback not fired |
| * :github:`38853` - Bluetooth: host: bt_unpair failed because function [bt_conn_set_state] wont work as expected |
| * :github:`38849` - drivers: i2c: nrf: i2c error with burst write |
| * :github:`38829` - net_buf issue leads to unwanted elem free |
| * :github:`38826` - tests/lib/cmsis_dsp: malloc failed on 128K SRAM targets |
| * :github:`38818` - driver display display_st7789v.c build error |
| * :github:`38815` - kernel/mem_domain: Remove dead case in check_add_partition() |
| * :github:`38807` - stm32: Missing header in power.c files |
| * :github:`38804` - tests\kernel\threads\thread_stack test fail with ARC |
| * :github:`38799` - BLE central_ht only receives 7 notifications |
| * :github:`38796` - Failure building the zephyr\tests\subsys\cpp\libcxx project |
| * :github:`38791` - Example code_relocation not compiling. |
| * :github:`38790` - SD FatFS Sample Build Failure |
| * :github:`38784` - stm32: pm: Debug mode not functional on G0 |
| * :github:`38782` - CONFIG_BT_CTLR_DATA_LENGTH_MAX=250 causes pairing compatibility issues with many devices |
| * :github:`38769` - mqtt: the size of a mqtt payload is limited |
| * :github:`38765` - samples: create an OLED example |
| * :github:`38764` - CBPRINTF_FP_SUPPORT does not work after NEWLIB_LIBC enabled |
| * :github:`38761` - Does zephyr_library_property defines -DTRUE in command-line? |
| * :github:`38756` - Twister: missing testcases with error in report |
| * :github:`38745` - Bluetooth when configured for extended advertising does not limit advertisement packet size if a non-extended avertisement is used |
| * :github:`38737` - drivers: syscon: missing implementation |
| * :github:`38735` - nucleo_wb55rg: Flash space left to M0 binary is not sufficient anymore |
| * :github:`38731` - test-ci: ptp_clock_test : test failure on frdm_k64f platform |
| * :github:`38727` - [RFC] Add hal_gigadevice to support GigaDevice SoC Vendor |
| * :github:`38716` - modem: HL7800: does not work with IPv6 |
| * :github:`38702` - Coap server not properly removing observers |
| * :github:`38701` - Observable resource of coap server seems to not support a restart of an observer |
| * :github:`38700` - Observable resource of coap server seems to not support 2 observers simultaneously |
| * :github:`38698` - stm32f4_disco: Socket CAN sample not working |
| * :github:`38697` - The coap_server sample is missing the actual send in the retransmit routine |
| * :github:`38694` - Disabling NET_CONFIG_AUTO_INIT does not require calling net_config_init() manually in application as mentioned in Zephyr Network Configuration Library documentation |
| * :github:`38692` - samples/tfm_integration: Compilation fails ("unexpected keyword argument 'rom_fixed'") |
| * :github:`38691` - MPU fault with mcumgr bluetooth FOTA started whilst existing FOTA is in progress |
| * :github:`38690` - Wrong initialisation priority on different display drivers (eg. ST7735r) cause exception when using lvgl. |
| * :github:`38688` - bt_gatt_unsubscribe does not remove subscription from internal list/returning BT_GATT_ITER_STOP causes bt_gatt_subscribe to return -ENOMEM / -12 |
| * :github:`38675` - DTS binding create devicetree_unfixed.h build error at v2.7.0 |
| * :github:`38673` - DNS-SD library does not support ``_services._dns-sd._udp.local`` meta-query for service enumeration |
| * :github:`38668` - ESP32‘s I2S |
| * :github:`38667` - ST LSM6DSO polling mode does not work on nRF52dk_nrf52832 |
| * :github:`38655` - Failing Tests for Regulator API |
| * :github:`38653` - drivers: modem: gsm_ppp: Add support for Quectel modems |
| * :github:`38646` - SIMD Rounding bug while running Assembly addps instruction on Zephyr |
| * :github:`38641` - Arm v8-M '_ns' renaming was applied inconsistently |
| * :github:`38635` - USDHC driver broken on RT10XX after 387e6a676f86c00d1f9ef018e4b2480e0bcad3c8 commit |
| * :github:`38622` - subsys/usb: CONFIG_USB_DEVICE_STACK resulted in 10kb increase in firmware size |
| * :github:`38621` - Drivers: spi: stm32: Transceive lock forever |
| * :github:`38620` - STM32 uart driver prevent system to go to deep sleep |
| * :github:`38617` - HL7800 PSM not working as intended |
| * :github:`38613` - BLE connection parameters updated with inconsistent values |
| * :github:`38612` - Fault with assertions enabled prevents detailed output because of ISR() assertion check in shell function |
| * :github:`38602` - modem gsm |
| * :github:`38601` - nucleo_f103rb: samples/posix/eventfd/ failed since "retargetable locking" addition |
| * :github:`38593` - using RTT console to print along with newlib C library in Zephyr |
| * :github:`38591` - nucleo_f091rc: Linking issue since "align __data_ram/rom_start/end linker" (65a2de84a9d5c535167951bf1cf610c4f7967ea5) |
| * :github:`38586` - olimexino_stm32: "no DEVICE_HANDLE_ENDS inserted" builld issue (samples/subsys/usb/audio/headphones_microphone) |
| * :github:`38581` - tests-ci : kernel: scheduler: multiq test failed |
| * :github:`38582` - tests-ci : kernel: scheduler: test failed |
| * :github:`38578` - STM32L0X ADC hangs |
| * :github:`38572` - Builds with macOS SDK are failing |
| * :github:`38571` - bug: drivers: ethernet: build as static library breaks frdm_k64f gptp sample application |
| * :github:`38563` - ISO broadcast cannot send with callback if CONFIG_BT_CONN=n |
| * :github:`38560` - log v2 with 64-bit integers and threads causes invalid 64-bit value output |
| * :github:`38559` - Shell log backend may hang on qemu_x86_64 |
| * :github:`38558` - CMake warning: CMP0079 |
| * :github:`38554` - tests-ci : kernel: scheduler: test failed |
| * :github:`38552` - stm32: g0b1: garbage output in log and suspected hard fault when configuring modem |
| * :github:`38536` - samples: tests: display: Sample for display.ft800 causes end in timeout |
| * :github:`38535` - drivers: modem: bg9x: Kconfig values compiled into ``autoconf.h`` even if it isn't being used |
| * :github:`38534` - lwm2m: add api to inspect observation state of resource/object |
| * :github:`38532` - samples: audio: tests: Twister fails on samples/drivers/audio/dmic |
| * :github:`38527` - lwm2m: re-register instead of removing observer on COAP reset answer to notification |
| * :github:`38520` - Bluetooth:Host:Scan: "bt_le_per_adv_list_add" function doesn't work |
| * :github:`38519` - stm32: g0b1re: Log/Shell subsys with serial uart buggy after #38432 |
| * :github:`38516` - subsys: net: ip: packet_socket: always returning of NET_CONTINUE caused access to unreferred pkt and causing a crash/segmentation fault |
| * :github:`38514` - mqtt azure sample failing with net_tcp "is waiting on connect semaphore" |
| * :github:`38512` - stm32f7: CAN: STM32F645VE CAN signal seems upside down. |
| * :github:`38500` - tests/kernel/device/kernel.device.pm fails to build on TI platforms |
| * :github:`38498` - net: ipv6: nbr_lock not initialized with CONFIG_NET_IPV6_ND=n |
| * :github:`38480` - Improve samples documentation |
| * :github:`38479` - "west flash" command exiting with error |
| * :github:`38477` - json: JSON Library Orphaned, Request to Become a Maintainer |
| * :github:`38474` - command exited with status 63: nrfjprog --ids |
| * :github:`38463` - check_compliance gives very many Kconfig warnings |
| * :github:`38452` - Some STM32 series require CONFIG_PM_DEVICE if CONFIG_PM=y |
| * :github:`38442` - test-ci: can: twr_ke18f: all can driver test fails with BUS Fault |
| * :github:`38438` - test-ci: test_flash_map:twr_ke18f: test failure |
| * :github:`38437` - stm32: g0b1re: Serial UART timing issue after MCU entered deep sleep |
| * :github:`38433` - gpio_pin_set not working on STM32 with CONFIG_PM_DEVICE_RUNTIME |
| * :github:`38428` - http_client response callback always reports final_data == HTTP_DATA_FINAL |
| * :github:`38427` - mimxrt1050_evk and mimxrt1020_evk boards fail to boot some sample applications |
| * :github:`38421` - HardFault regression detected on Cortex-M0+ following Cortex-R introduction |
| * :github:`38418` - twister: Remove toolchain-depandat filter for native_posix |
| * :github:`38417` - Add support for WeAct-F401CC board |
| * :github:`38414` - Build of http client fails if CONFIG_POSIX_API=y |
| * :github:`38405` - samples/philosophers/sample.kernel.philosopher.stacks fails on xtensa |
| * :github:`38403` - Cleanup ``No SOURCES given to Zephyr library`` warnings |
| * :github:`38402` - module: MCUboot module missing fixes available upstream |
| * :github:`38401` - Builds fail due to a proxy error by launchpadlibrarian |
| * :github:`38400` - mec15xxevb_assy6853: arm_ramfunc and arm_sw_vector_relay tests timeout after the build |
| * :github:`38398` - DT_N_INST error for TMP116 sample |
| * :github:`38396` - RISC-V privilege SoC initialisation code skips the __reset vector |
| * :github:`38382` - stm32 uart finishes Tx before going to PM |
| * :github:`38365` - drivers: gsm_ppp: gsm_ppp_stop fails to lock tx_sem after some time |
| * :github:`38362` - soc: ti cc13x2-cc26x2: PM standby + radio interaction regression |
| * :github:`38354` - stm32: stm32f10x JTAG realated gpio repmap didn't works |
| * :github:`38351` - Custom radio protocol |
| * :github:`38349` - XCC compilation fails on Intel cAVS platforms |
| * :github:`38348` - Bluetooth: Switch to inclusive terminology from the 5.3 specification |
| * :github:`38340` - Bluetooth:DirectionFinding: Disabling the MPU causes some compilation errors |
| * :github:`38332` - stm32g0: power hooks should be define as weak |
| * :github:`38323` - Can not generate code coverage report by running samples/subsys/tracing |
| * :github:`38316` - Synchronize multiple DF TX devices in the DF Connectionless RX Example "Periodic Advertising list" |
| * :github:`38309` - ARC context switch to interrupted thread busted with CONFIG_ARC_FIRQ=y and CONFIG_NUM_IRQ_PRIO_LEVELS=1 |
| * :github:`38303` - The current BabbleSim tests build system based on bash scripts hides warnings |
| * :github:`38290` - net_buf_add_mem() hard-faults when adding buffer from external SDRAM |
| * :github:`38279` - Bluetooth: Controller: assert LL_ASSERT(!radio_is_ready()) in lll_conn.c |
| * :github:`38277` - soc: stm32h7: Fails to boot with LDO power supply, if soc has SMPS support. |
| * :github:`38276` - LwM2M: RD Client: Wrong state if registration fails |
| * :github:`38273` - Support UART4 on STM32F303Xe |
| * :github:`38272` - "west flash" stopped working |
| * :github:`38271` - Expose emulator_get_binding function |
| * :github:`38264` - Modbus over RS485 on samd21g18a re-gpios turning on 1 byte too early |
| * :github:`38259` - subsys/shell: ``[JJ`` escape codes in logs after disabling colors |
| * :github:`38258` - newlib: first malloc call may fail on Xtensa depending on image size |
| * :github:`38246` - samples: drivers: flash_shell: fails on arduino_due due to compilation issue |
| * :github:`38245` - board: bl654_usb project: samples/basic/blinky does not blink LED |
| * :github:`38240` - Connected ISO does not disconnect gracefully |
| * :github:`38237` - [backport v2.6-branch] backport of #37479 failed |
| * :github:`38235` - Please add stm32h723Xe.dtsi to dts/arm/st/h7/ |
| * :github:`38234` - Newlib retargetable lock init fails on qemu_xtensa |
| * :github:`38233` - Build newlib function read() and write() failed when enable userspace |
| * :github:`38219` - kernel: Z_MEM_SLAB_INITIALIZER MACRO not compatible with C++ |
| * :github:`38216` - nxp_adsp_imx8 fails to build a number of tests |
| * :github:`38214` - xtensa builds fail in CI due to running out of ram to link |
| * :github:`38207` - Use of unaligned noinit data hangs qemu_arc_hs |
| * :github:`38202` - mbedtls and littlefs on a STM32L4 |
| * :github:`38197` - Invalid NULL check for ``iso`` in bt_iso_connected |
| * :github:`38196` - net nbr command might crash |
| * :github:`38191` - Unable to connect multiple MQTT clients |
| * :github:`38186` - i.MX RT10xx boards fail to initialize when Ethernet is enabled |
| * :github:`38181` - tests/drivers/uart/uart_basic_api/drivers.uart.cdc_acm fails to build |
| * :github:`38177` - LORA Module crashes SHT3XD sensor. |
| * :github:`38173` - STM32WB: Low power modes entry blocked by C2 when CONFIG_BLE=n |
| * :github:`38172` - modem_context_sprint_ip_addr returns pointer to stack array |
| * :github:`38170` - Shell argument in second position containing a question mark is ignored |
| * :github:`38168` - aarch32: flags value collision between base IRQ layer and GIC interrupt controller driver |
| * :github:`38162` - Upgrade to 2.6 GPIO device_get_binding("GPIO_0") now returns null |
| * :github:`38154` - Error building example i2c_fujitsu_fram |
| * :github:`38153` - Zephyr Native POSIX select() implementation too frequent wakeup on pure timeout based use |
| * :github:`38145` - [backport v2.6-branch] backport of #37787 failed |
| * :github:`38144` - [backport v2.6-branch] backport of #37787 failed |
| * :github:`38141` - Wrong output from printk() with CONFIG_CBPRINTF_NANO=y |
| * :github:`38138` - [Coverity CID: 239554] Out-of-bounds read in /zephyr/include/generated/syscalls/log_msg2.h (Generated Code) |
| * :github:`38137` - [Coverity CID: 239555] Unchecked return value in subsys/mgmt/hawkbit/hawkbit.c |
| * :github:`38136` - [Coverity CID: 239557] Out-of-bounds read in /zephyr/include/generated/syscalls/kernel.h (Generated Code) |
| * :github:`38135` - [Coverity CID: 239560] Out-of-bounds access in subsys/modbus/modbus_core.c |
| * :github:`38134` - [Coverity CID: 239563] Logically dead code in subsys/bluetooth/host/id.c |
| * :github:`38133` - [Coverity CID: 239564] Side effect in assertion in subsys/bluetooth/controller/ll_sw/nordic/lll/lll.c |
| * :github:`38132` - [Coverity CID: 239565] Unchecked return value in drivers/sensor/adxl372/adxl372_trigger.c |
| * :github:`38131` - [Coverity CID: 239568] Out-of-bounds access in subsys/modbus/modbus_core.c |
| * :github:`38130` - [Coverity CID: 239569] Out-of-bounds access in subsys/bluetooth/host/id.c |
| * :github:`38129` - [Coverity CID: 239572] Out-of-bounds read in /zephyr/include/generated/syscalls/kernel.h (Generated Code) |
| * :github:`38127` - [Coverity CID: 239579] Logically dead code in drivers/flash/nrf_qspi_nor.c |
| * :github:`38126` - [Coverity CID: 239581] Out-of-bounds access in subsys/modbus/modbus_core.c |
| * :github:`38125` - [Coverity CID: 239582] Unchecked return value in drivers/display/ssd1306.c |
| * :github:`38124` - [Coverity CID: 239583] Side effect in assertion in subsys/bluetooth/controller/ll_sw/nordic/lll/lll.c |
| * :github:`38123` - [Coverity CID: 239584] Improper use of negative value in subsys/logging/log_msg2.c |
| * :github:`38122` - [Coverity CID: 239585] Side effect in assertion in subsys/bluetooth/controller/ll_sw/nordic/lll/lll.c |
| * :github:`38121` - [Coverity CID: 239586] Side effect in assertion in subsys/bluetooth/controller/ll_sw/nordic/lll/lll.c |
| * :github:`38120` - [Coverity CID: 239588] Unchecked return value in subsys/bluetooth/host/id.c |
| * :github:`38119` - [Coverity CID: 239592] Dereference before null check in subsys/ipc/rpmsg_multi_instance/rpmsg_multi_instance.c |
| * :github:`38118` - [Coverity CID: 239597] Explicit null dereferenced in tests/net/context/src/main.c |
| * :github:`38117` - [Coverity CID: 239598] Unchecked return value in drivers/sensor/adxl362/adxl362_trigger.c |
| * :github:`38116` - [Coverity CID: 239601] Untrusted loop bound in subsys/bluetooth/host/sdp.c |
| * :github:`38115` - [Coverity CID: 239605] Logically dead code in drivers/flash/nrf_qspi_nor.c |
| * :github:`38114` - [Coverity CID: 239607] Missing break in switch in subsys/usb/class/dfu/usb_dfu.c |
| * :github:`38113` - [Coverity CID: 239609] Out-of-bounds access in subsys/random/rand32_ctr_drbg.c |
| * :github:`38112` - [Coverity CID: 239612] Out-of-bounds read in /zephyr/include/generated/syscalls/log_ctrl.h (Generated Code) |
| * :github:`38111` - [Coverity CID: 239615] Out-of-bounds access in subsys/net/lib/sockets/sockets_tls.c |
| * :github:`38110` - [Coverity CID: 239619] Out-of-bounds access in subsys/net/lib/sockets/sockets_tls.c |
| * :github:`38109` - [Coverity CID: 239623] Out-of-bounds access in subsys/net/lib/sockets/sockets_tls.c |
| * :github:`38108` - nxp: usb driver build failure due to d92d1f162af3ba24963f1026fc0a304f1a44d1f3 |
| * :github:`38104` - kheap buffer own section attribute causing memory overflow in ESP32 |
| * :github:`38101` - bt_le_adv_update_data() assertion fail |
| * :github:`38093` - preempt_cnt not reset in each test case in tests/lib/ringbuffer/libraries.data_structures |
| * :github:`38090` - LPS22HH: int32_t overflow in pressure calculations |
| * :github:`38082` - Hawkbit (http request) and MQTT can't seem to work together |
| * :github:`38078` - RT6XX I2S test fails after d92d1f162af3ba24963f1026fc0a304f1a44d1f3 |
| * :github:`38069` - stm32h747i_disco M4 not working following merge of 9fa5437447712eece9c88e728ac05ac10fb01c4a |
| * :github:`38065` - Bluetooth: Direction Finding: Compiler warning when included in other header files |
| * :github:`38059` - automount configuration in nrf52840dk_nrf52840.overlay causes error: mount point already exists!! in subsys/fs/littlefs sample |
| * :github:`38054` - Bluetooth: host: Local Host terminated but send host number of completed Packed |
| * :github:`38047` - twister: The --board-root parameter doesn't appear to work |
| * :github:`38046` - twister: The --device-serial only works at 115200 baud |
| * :github:`38044` - tests: newlib: Scenarios from tests/lib/newlib/thread_safety fail on nrf9160dk_nrf9160_ns |
| * :github:`38031` - STM32WB - Problem with data reception on LPUART when PM and LPTIM are enabled |
| * :github:`38026` - boards: bl654_usb: does not support samples/bluetooth/hci_uart |
| * :github:`38022` - thread: k_float_enable() API can't build on x86_64 platforms, fix that API and macro documentation |
| * :github:`38019` - nsim_sem_mpu_stack_guard board can't run |
| * :github:`38017` - [Coverity CID: 237063] Untrusted value as argument in tests/net/lib/coap/src/main.c |
| * :github:`38016` - [Coverity CID: 238375] Uninitialized pointer read in subsys/bluetooth/mesh/shell.c |
| * :github:`38015` - [Coverity CID: 237072] Uninitialized pointer read in subsys/bluetooth/controller/ll_sw/ull_adv_aux.c |
| * :github:`38014` - [Coverity CID: 237071] Unexpected control flow in subsys/bluetooth/host/keys.c |
| * :github:`38013` - [Coverity CID: 237070] Unchecked return value in subsys/bluetooth/shell/gatt.c |
| * :github:`38012` - [Coverity CID: 236654] Unchecked return value in subsys/bluetooth/host/gatt.c |
| * :github:`38011` - [Coverity CID: 236653] Unchecked return value in drivers/sensor/bmi160/bmi160_trigger.c |
| * :github:`38010` - [Coverity CID: 236652] Unchecked return value in drivers/sensor/fxas21002/fxas21002_trigger.c |
| * :github:`38009` - [Coverity CID: 236651] Unchecked return value in drivers/sensor/bmg160/bmg160_trigger.c |
| * :github:`38008` - [Coverity CID: 236650] Unchecked return value in drivers/sensor/fxos8700/fxos8700_trigger.c |
| * :github:`38007` - [Coverity CID: 236649] Unchecked return value in drivers/sensor/adt7420/adt7420_trigger.c |
| * :github:`38006` - [Coverity CID: 236648] Unchecked return value in drivers/sensor/sx9500/sx9500_trigger.c |
| * :github:`38005` - [Coverity CID: 236647] Unchecked return value in drivers/sensor/bmp388/bmp388_trigger.c |
| * :github:`38004` - [Coverity CID: 238360] Result is not floating-point in drivers/sensor/sgp40/sgp40.c |
| * :github:`38003` - [Coverity CID: 238343] Result is not floating-point in drivers/sensor/sgp40/sgp40.c |
| * :github:`38002` - [Coverity CID: 237060] Out-of-bounds access in subsys/bluetooth/host/gatt.c |
| * :github:`38001` - [Coverity CID: 238371] Negative array index read in tests/lib/cbprintf_package/src/test.inc |
| * :github:`38000` - [Coverity CID: 238347] Negative array index read in tests/lib/cbprintf_package/src/test.inc |
| * :github:`37999` - [Coverity CID: 238383] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37998` - [Coverity CID: 238381] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37997` - [Coverity CID: 238380] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37996` - [Coverity CID: 238379] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37995` - [Coverity CID: 238378] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37994` - [Coverity CID: 238377] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37993` - [Coverity CID: 238376] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37992` - [Coverity CID: 238374] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37991` - [Coverity CID: 238373] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37990` - [Coverity CID: 238372] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37989` - [Coverity CID: 238370] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37988` - [Coverity CID: 238369] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37987` - [Coverity CID: 238368] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37986` - [Coverity CID: 238367] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37985` - [Coverity CID: 238366] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37984` - [Coverity CID: 238364] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37983` - [Coverity CID: 238363] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37982` - [Coverity CID: 238362] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37981` - [Coverity CID: 238361] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37980` - [Coverity CID: 238359] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37979` - [Coverity CID: 238358] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37978` - [Coverity CID: 238357] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37977` - [Coverity CID: 238356] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37976` - [Coverity CID: 238355] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37975` - [Coverity CID: 238354] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37974` - [Coverity CID: 238353] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37973` - [Coverity CID: 238352] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37972` - [Coverity CID: 238351] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37971` - [Coverity CID: 238350] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37970` - [Coverity CID: 238349] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37969` - [Coverity CID: 238348] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37968` - [Coverity CID: 238346] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37967` - [Coverity CID: 238345] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37966` - [Coverity CID: 238344] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37965` - [Coverity CID: 238342] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37964` - [Coverity CID: 238341] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37963` - [Coverity CID: 238340] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37962` - [Coverity CID: 238339] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37961` - [Coverity CID: 238337] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37960` - [Coverity CID: 238336] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37959` - [Coverity CID: 238335] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37958` - [Coverity CID: 238334] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37957` - [Coverity CID: 238333] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37956` - [Coverity CID: 238332] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37955` - [Coverity CID: 238331] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37954` - [Coverity CID: 238330] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37953` - [Coverity CID: 238328] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37952` - [Coverity CID: 238327] Logically dead code in tests/bluetooth/tester/src/mesh.c |
| * :github:`37951` - [Coverity CID: 238365] Logical vs. bitwise operator in drivers/i2s/i2s_nrfx.c |
| * :github:`37950` - [Coverity CID: 237067] Division or modulo by zero in tests/benchmarks/latency_measure/src/heap_malloc_free.c |
| * :github:`37949` - [Coverity CID: 238382] Dereference before null check in subsys/bluetooth/mesh/cfg_cli.c |
| * :github:`37948` - [Coverity CID: 238338] Dereference before null check in subsys/bluetooth/mesh/cfg_cli.c |
| * :github:`37947` - [Coverity CID: 237069] Dereference before null check in subsys/bluetooth/host/att.c |
| * :github:`37946` - [Coverity CID: 237066] Calling risky function in tests/lib/c_lib/src/main.c |
| * :github:`37945` - [Coverity CID: 237064] Calling risky function in tests/lib/c_lib/src/main.c |
| * :github:`37944` - [Coverity CID: 237062] Calling risky function in tests/lib/c_lib/src/main.c |
| * :github:`37940` - Unconsistent UART ASYNC API |
| * :github:`37927` - tests-ci: net-lib: test/net/lib : build missing drivers__net and application has no console output |
| * :github:`37916` - [Coverity CID :219656] Uninitialized scalar variable in file /tests/kernel/threads/thread_stack/src/main.c |
| * :github:`37915` - led_pwm driver not generating correct linker symbol |
| * :github:`37896` - samples: bluetooth: mesh: build failed for native posix |
| * :github:`37876` - Execution of twister in makefile environment |
| * :github:`37865` - nRF Battery measurement issue |
| * :github:`37861` - tests/lib/ringbuffer failed on ARC boards |
| * :github:`37856` - tests: arm: uninitialized FPSCR |
| * :github:`37852` - RISC-V machine timer time-keeping question |
| * :github:`37850` - Provide macros for switching off Zephyr kernel version |
| * :github:`37842` - TCP2 statemachine gets stuck in TCP_FIN_WAIT_2 state |
| * :github:`37839` - SX1272 LoRa driver is broken and fails to build |
| * :github:`37838` - cmake 3.20 not supported (yet) by recent Ubuntu |
| * :github:`37830` - intel_adsp_cavs15: run queue testcases failed on ADSP |
| * :github:`37827` - stm32h747i_disco M4 not working, if use large size(>1KB) global array |
| * :github:`37821` - pm: ``pm_device_request`` incorrectly returns errors |
| * :github:`37797` - Merge vendor-prefixes.txt from all modules with build.settings.dts_root in zephyr/module.yml |
| * :github:`37790` - Bluetooth: host: Confusion about periodic advertising interval |
| * :github:`37786` - Example for tca9546a multiplexor driver |
| * :github:`37784` - MPU6050 accel and gyro values swapped |
| * :github:`37781` - nucleo_l496zg lpuart1 driver not working |
| * :github:`37779` - adc sam0 interrupt mapping, RESRDY maps to second interrupt in samd5x.dtsi |
| * :github:`37772` - samples: subsys: usb: mass: Use &flash0 storage_partition for USB mass storage |
| * :github:`37768` - tests/lib/ringbuffer/libraries.data_structures fails to build on number of platforms due to CONFIG_SYS_CLOCK_TICKS_PER_SEC=100000 |
| * :github:`37765` - cmake: multiple ``No SOURCES given to Zephyr library:`` warnings |
| * :github:`37746` - qemu_x86_64 fails samples/hello_world/sample.basic.helloworld.uefi in CI |
| * :github:`37735` - Unsigned types are incorrectly serialized when TLV format is used in LWM2M response |
| * :github:`37734` - xtensa xcc build spi_nor.c fail |
| * :github:`37720` - net: dtls: received close_notify alerts are not properly handled by DTLS client sockets |
| * :github:`37718` - Incompatible (u)intptr_t type and PRIxPTR definitions |
| * :github:`37709` - x86 PCIe ECAM does not work as expected |
| * :github:`37701` - stm32: conflicts with uart serial DMA |
| * :github:`37696` - Modbus TCP: wrong transaction id in response |
| * :github:`37694` - Update CMSIS-DSP version to 1.9.0 (CMSIS 5.8.0) |
| * :github:`37693` - Update CMSIS-Core version to 5.5.0 (CMSIS 5.8.0) |
| * :github:`37691` - samples/subsys/canbus/isotp/sample.subsys.canbus.isotp fails to build on mimxrt1170_evk_cm7 |
| * :github:`37687` - Support MVE on ARMv8.1-M |
| * :github:`37684` - Add State Machine Framework to Zephyr |
| * :github:`37676` - tests/kernel/device/kernel.device.pm (and tests/subsys/pm/power_mgmt/subsys.pm.device_pm) fails to build on mec172xevb_assy6906 & mec1501modular_assy6885 |
| * :github:`37675` - tests/kernel/device/kernel.device.pm fails on bt510/bt6x0 |
| * :github:`37672` - Board qemu_x86 is no longer working with shell |
| * :github:`37665` - File system: wrong type for ssize_t in fs.h for CONFIG_ARCH_POSIX |
| * :github:`37660` - Changing zephyr,console requires a clean build |
| * :github:`37658` - samples: boards/stm32/backup_sram : needs backup sram enabled in DT to properly display memory region |
| * :github:`37652` - bluetooth: tests/bluetooth/bsim_bt/bsim_test_advx reported success but still reported failed. |
| * :github:`37637` - Infinite configuring loop for samples\drivers\led_ws2812 sample |
| * :github:`37619` - RT6xx TRNG reports error on first request after reset |
| * :github:`37611` - Bluetooth: host: Implement L2CAP ecred reconfiguration request as initiator |
| * :github:`37610` - subsys/mgmt/hawkbit: Unable to parse json if the payload is split into 2 packets |
| * :github:`37600` - Invalidate TLB after ptables swap |
| * :github:`37597` - samples: bluetooth: scan_adv |
| * :github:`37586` - get_maintainer.py is broken |
| * :github:`37581` - Bluetooth: controller: radio: Change CTE configuration method |
| * :github:`37579` - PWM: Issue compiling project when CONFIG_PWM and CONFIG_PWM_SAM is used with SAME70 |
| * :github:`37571` - Bluetooth: Extended advertising assertion |
| * :github:`37556` - Schedule or timeline of LE audio in zephyr |
| * :github:`37547` - Bluetooth: Direction Finding: Channel index of received CTE packet is incorrect |
| * :github:`37544` - Change partition name using .overlay |
| * :github:`37543` - Using STM32Cube HAL function results in linker error |
| * :github:`37536` - _pm_devices() skips the very first device in the list and suspend() is not called. |
| * :github:`37530` - arc smp build failed with mwdt toolchain. |
| * :github:`37527` - Replace mqtt-azure example with azure-sdk-for-c |
| * :github:`37526` - ehl_crb: edac tests are failing |
| * :github:`37520` - Is zephyr can run syscall or extrenal program |
| * :github:`37519` - friend.c:unseg_app_sdu_decrypt causes assert: net_buf_simple_tailfroom(buf) >= len when payload + opcode is 10 or 11 bytes long |
| * :github:`37515` - drivers: flash_sam: Random failures when writing large amount of data to flash |
| * :github:`37502` - OPENTHREAD_CUSTOM_PARAMETERS does not seem to work |
| * :github:`37495` - mcuboot: Booting an image flashed on top of a Hawkbit updated ones results in hard fault |
| * :github:`37491` - wrong documentation format on DMA peripheral API reference |
| * :github:`37482` - 'cmd.exe' is not recognized as an internal or external command, operable program or batch file. |
| * :github:`37475` - twister: wrong test statuses in json report |
| * :github:`37472` - Corrupted timeout on poll for offloaded sockets |
| * :github:`37467` - Bluetooth: host: Incorrect advertiser timeout handling when using Limited Discoverable flag |
| * :github:`37465` - samples/bluetooth/iso_receive fails on nrf5340dk target |
| * :github:`37462` - Bluetooth: Advertising becomes scannable even if BT_LE_ADV_OPT_FORCE_NAME_IN_AD is set |
| * :github:`37461` - Schedule of LE audio in zephyr |
| * :github:`37460` - tests/kernel/sched/schedule_api/kernel.scheduler and tests/kernel/fifo/fifo_timeout/kernel.fifo.timeout failed on nsim_hs_smp board |
| * :github:`37456` - script: Unaccounted size in ram/rom reports |
| * :github:`37454` - Sensor driver: sht4x, sgp40, invalid include path |
| * :github:`37446` - Sensor driver: ST LPS22HH undeclared functions and variables |
| * :github:`37444` - MSI-X: wrong register referenced in map_msix_table() |
| * :github:`37441` - Native POSIX Flash Storage Does not Support Multiple Instances |
| * :github:`37436` - Delayed startup due to printing over not ready console |
| * :github:`37412` - IQ samples are not correct during the "reference period" of CTE signal |
| * :github:`37409` - Allow dual controller on usb |
| * :github:`37406` - ISO disconnect complete event doesn't reach the application |
| * :github:`37400` - esp32 build |
| * :github:`37396` - DHCP issue with events not triggering on network with microsoft windows DHCP server |
| * :github:`37395` - stm32h747i_disco board M4 core not working |
| * :github:`37391` - Bluetooth: 4 Bits of IQ Samples Are Removed (Direction Finding Based on CTE) |
| * :github:`37386` - bt_vcs_register() enhancement for setting default volume and step |
| * :github:`37379` - drivers: adc for stm32h7 depends on the version for oversampling |
| * :github:`37376` - samples/subsys/usb/dfu/sample.usb.dfu fails on teensy41/teensy40 |
| * :github:`37375` - tests/drivers/adc/adc_api/drivers.adc fails to build on nucleo_h753zi |
| * :github:`37371` - logging.log2_api_deferred_64b_timestamp tests fails running on several qemu platforms |
| * :github:`37367` - Bluetooth: Host: Support setting long advertising data |
| * :github:`37365` - STM32 :DTCM: incorrect buffer size utilization |
| * :github:`37346` - STM32WL LoRa increased the current in "suspend_to_idle" state |
| * :github:`37338` - west flash to teensy 41 fail, use blinky with west build |
| * :github:`37332` - Increased power consumption for STM32WB55 with enabled PM and Bluetooth |
| * :github:`37327` - subsys/mgmt/hawkbit: hawkbit run can interrupt a running instance |
| * :github:`37319` - West 0.11.0 fails in Zephyr doc build under other manifest repo & renamed Zephyr fork |
| * :github:`37309` - ARC: add MPU v6 (and others) support |
| * :github:`37307` - Use XOSHIRO random number generator on NXP i.MX RT platform |
| * :github:`37306` - revert commit with bogus commit message |
| * :github:`37305` - Bluetooth Direction Finding Support of "AoA RX 1us" |
| * :github:`37304` - k_timer_status_sync can lock forever on qemu_x86_64 |
| * :github:`37303` - tests: drivers: i2s: drivers.i2s.speed scenario fails on nrf platforms |
| * :github:`37294` - RTT logs not found with default west debug invocation on jlink runner |
| * :github:`37293` - Native POSIX MAC addresses are not random and are duplicate between multiple instances |
| * :github:`37272` - subsys/mgmt/hawkbit: Falsely determine that an update is installed successfully |
| * :github:`37270` - stm32l4 System Power Management issue |
| * :github:`37264` - tests-ci : can: isotp: implemmentation test report FATAL ERROR when do not connect can loopback test pins |
| * :github:`37265` - tests-ci : kernel: scheduler: multiq test failed |
| * :github:`37266` - tests-ci : kernel: memory_protection: userspace test Timeout |
| * :github:`37267` - tests-ci : kernel: threads: apis test Timeout |
| * :github:`37263` - lib: timeutil: conversion becomes less accurate as time progresses |
| * :github:`37260` - STM32WL does not support HSE as RCC source and HSEDiv |
| * :github:`37258` - symmetric multiprocessing failed in user mode |
| * :github:`37254` - Run Coverity / Generate GitHub Issues |
| * :github:`37253` - west flash is failed with openocd for on macOS |
| * :github:`37236` - ESP32 will not start when CONFIG_ASSERT=y is enabled |
| * :github:`37231` - BME280 faulty measurement after power cycle |
| * :github:`37228` - Bluetooth SMP does not complete pairing |
| * :github:`37226` - PM: soc: Leftover in conversion of PM hooks to __weak |
| * :github:`37225` - subsys/mgmt/hawkbit & sample: Bugs/improvements |
| * :github:`37222` - k_queue data corruption, override user data after reserved heading word |
| * :github:`37221` - nRF5340: SPIM4 invalid clock frequency selection |
| * :github:`37213` - ESP32: can't write to SD card over SPI (CRC error) |
| * :github:`37207` - drivers: serial: convert uart_altera_jtag_hal to use devicetree |
| * :github:`37206` - counter: stm32: Missing implementation of set_top_value |
| * :github:`37205` - openocd: Configure thread awareness by default |
| * :github:`37202` - esp32c3 build error |
| * :github:`37189` - Bug "Key 'name', 'cmake-ext' and 'kconfig-ext' were not defined" when build a zephyr application |
| * :github:`37188` - Get an error of "Illegal load of EXC_RETURN into PC" when print log in IO interrupt callback |
| * :github:`37182` - cmsis_v1 osSignalWait doesn't clear the signals properly when any signal mask is set |
| * :github:`37180` - Led driver PCA9633 does nok take chip out from sleep |
| * :github:`37175` - nucleo-f756zg: rtos aware debugging not working |
| * :github:`37174` - Zephyr's .git directory is 409 MiB, can it be squashed? |
| * :github:`37173` - drivers: clock_control: stm32: AHB prescaler usable for almost all stm32 series |
| * :github:`37170` - LwM2M lwm2m_rd_client_stop() not working when called during bootstrapping/registration |
| * :github:`37160` - [Moved] Bootloader should provide the version of zephyr, mcuboot and a user defined version to the application |
| * :github:`37159` - osThreadTerminate does not decrease the instances counter |
| * :github:`37153` - USB serial number is not unique for STM32 devices |
| * :github:`37145` - sys: ring_buffer: ring_buf_peek() and ring_buf_size_get() |
| * :github:`37140` - Twister: Cmake error wrongly counted in the report |
| * :github:`37135` - Extend the HWINFO API to provide variable length unique ID |
| * :github:`37134` - Add support for the Raspberry Pi Compute Module 4 |
| * :github:`37132` - Assert on enabling Socket CAN |
| * :github:`37120` - Documentation on modules |
| * :github:`37119` - tests: kernel tests hardfault on nucleo_l073rz |
| * :github:`37115` - tests/bluetooth/shell fails to builds on a lot of platforms |
| * :github:`37109` - Zephyr POSIX layer uses swapping with an interrupt lock held |
| * :github:`37105` - mcumgr: BUS FAULT when starting dfu with mcumgr CLI |
| * :github:`37104` - tests-ci : kernel: scheduler: multiq test failed |
| * :github:`37075` - PlatformIO: i cannot use the Wifi Shield ESP8266 to build the sample wifi project with the Nucleo F429ZI |
| * :github:`37070` - NXP mcux ADC16 reading 65535 |
| * :github:`37057` - PWM-blinky for Silabs MCU |
| * :github:`37038` - stm32f4 - DMA tx interrupt doesn't trigger |
| * :github:`37032` - document: API reference missing: In clock of zephyr document |
| * :github:`37029` - drivers: sensor: sensor_value_to_double requieres non const sensor_value pointer |
| * :github:`37028` - ipv6 multicast addresses vanish after iface down/up sequence |
| * :github:`37024` - Compile error if we only use VCS without VOCS and AICS |
| * :github:`37023` - zephyr_prebuilt.elf and zephyr.elf has inconsistent symbol address in RISC-V platform |
| * :github:`37007` - Problem with out of tree driver |
| * :github:`37006` - tests: kernel: mem_protect: stack_random: enable qemu_riscv32 |
| * :github:`36998` - TF-M: does not allow PSA Connect to proceed with IRQs locked |
| * :github:`36990` - Memory misalignment ARM Cortex-M33 |
| * :github:`36971` - ESP32: wifi station sample does not get IP address by DHCP4 |
| * :github:`36967` - Bluetooth: public API to query controller public address |
| * :github:`36959` - Direction Finding - CTE transmitted in connectionless mode has wrong length |
| * :github:`36953` - <err> lorawan: MlmeConfirm failed : Tx timeout |
| * :github:`36948` - Cluttering of logs on USB Console in Zephyr when CDC Shell is enabled |
| * :github:`36947` - Tensorflow: Dedicated tflite-micro repository |
| * :github:`36929` - Failure to build OpenThread LwM2M client on nrf52840dk |
| * :github:`36928` - Disconnecting ISO mid-send giver error in hci_num_completed_packets |
| * :github:`36927` - LWM2M: Writing to Write-Only resource causes notification |
| * :github:`36926` - samples/boards/nrf/system_off wouldn't compile on Particle Xenon board |
| * :github:`36924` - embARC Machine Learning Inference Library from Synopsys |
| * :github:`36917` - Runtime device PM is broken on STM32 |
| * :github:`36909` - Shell log` commands crash the system if CONFIG_SHELL_LOG_BACKEND is not defined |
| * :github:`36896` - tests: net: select: still failing occasionally due to FUZZ |
| * :github:`36891` - Significant TCP perfomance regression |
| * :github:`36889` - string.h / strcasestr() + strtok() |
| * :github:`36885` - Update ISO API to better support TWS |
| * :github:`36882` - MCUMGR: fs upload fail for first time file upload |
| * :github:`36873` - USB AUDIO Byte alignment issues |
| * :github:`36869` - Direction Finding Connectionless porting to nrf52811 |
| * :github:`36866` - CONFIG_NO_OPTIMIZATIONS=y MPU fault on Zephyr 2.6 |
| * :github:`36865` - k_work_q seems to check uninitialized flag on start |
| * :github:`36859` - Possible Advertising PDU Corruption if bt_enable called in SYS_INIT function |
| * :github:`36858` - Static object constructors execute twice on the NATIVE_POSIX target |
| * :github:`36857` - i2c_samd0.c burst write not compatible with ssd1306.c |
| * :github:`36851` - FS logging backend assumes littlefs |
| * :github:`36823` - Build excludes paths to standard C++ headers when using GNUARMEMB toolchain variant |
| * :github:`36819` - qemu_leon3 samples/subsys/portability/cmsis_rtos_v2 samples failing |
| * :github:`36814` - Wrong format type for uint32_t |
| * :github:`36811` - Clarify ``Z_`` APIs naming conventions and intended scope |
| * :github:`36802` - MCUboot doesn't work with encrypted images on external flash |
| * :github:`36796` - Build failure: samples/net/civetweb/http_server using target stm32h735g_disco |
| * :github:`36794` - Build failure: tests/drivers/adc using stm32l562e_dk |
| * :github:`36790` - sys: ring_buffer: correct space calculation when tail is less than head |
| * :github:`36789` - [ESP32] samples blinky / gpio / custom board |
| * :github:`36783` - drivers: modem: hl7800 gpio init failed with interrupt flags |
| * :github:`36782` - drivers: serial: nrfx: Enforced pull-ups on RXD and CTS conflict on many custom boards |
| * :github:`36781` - source_periph incorrectly set in dma_stm32 |
| * :github:`36778` - firmware update using mcumgr displays information for only slot 0 and not slot 1. |
| * :github:`36770` - doc：Missing description for deadline scheduling |
| * :github:`36769` - Zephyr assumes Interrupt Line config space register is RW, while ACRN hardwired it to 0. |
| * :github:`36767` - tests-ci :arch.arm.irq_advanced_features.arm_irq_target_state : test failed |
| * :github:`36768` - tests-ci :coredump.logging_backend : test failed |
| * :github:`36765` - [PCI] ACRN sets Interrupt Line config space register to 0 and ReadOnly. |
| * :github:`36764` - Bluetooth Require paired after disconnected work with iphone |
| * :github:`36755` - NTP client faults module when it fails |
| * :github:`36748` - Zephyr IP Stack Leaks when using PROMISCUOUS socket along with POSIX sockets based implementation. |
| * :github:`36747` - Adding Board Support for STEVAL-STWINKT1B |
| * :github:`36745` - Zephyr IP Stack Limited to 1514 bytes on the wire - no ICMPs beyond this limit |
| * :github:`36739` - coap_packet_get_payload() returns the wrong size |
| * :github:`36737` - Cortex M23: "swap_helper.S:223: Error: invalid offset, value too big (0x0000009C)" |
| * :github:`36736` - kernel: SMP global lock (and therefore irq_lock) works incorrectly on SMP platforms |
| * :github:`36718` - st_ble_sensor sample references wrong attribute |
| * :github:`36716` - zephyr - ADC - ATSAMD21G18A |
| * :github:`36713` - nrf5 ieee802154 driver does not compile and breaks CI |
| * :github:`36711` - Enable "template repository" for zephyrproject-rtos/example-application |
| * :github:`36696` - Json on native_posix_64 board |
| * :github:`36695` - net: ieee802154: cc13xx_26xx: Sub-GHz RF power saving |
| * :github:`36692` - Release Notes for 2.6.0 not useful (BLE API changes) |
| * :github:`36679` - Bluetooth - notifications not sending (bonded, CONFIG_BT_MAX_CONN=4, after disconnection then reconnection) |
| * :github:`36678` - Zephyr Throws Exception for Shell "log status" command when Telnet is shell backend and log is UART backend |
| * :github:`36668` - LittleFS example overwrite falsh memory |
| * :github:`36667` - logger: Filesystem backend doesn't work except for first time boot |
| * :github:`36665` - l2cap cids mixed up in request |
| * :github:`36661` - xtensa xcc does not support "-Warray-bounds" |
| * :github:`36659` - samples/net/sockets small bugs |
| * :github:`36655` - twister: sometimes the twister fails because the error ``configparser.NoSectionError: No section: 'manifest'`` |
| * :github:`36652` - deadlock in pthread implementation on SMP platforms |
| * :github:`36646` - sample.shell.shell_module.minimal_rtt fails to build on mimxrt1170_evk_cm4/mimxrt1170_evk_cm7 |
| * :github:`36644` - Toolchain C++ headers can be included when libstdc++ is not selected |
| * :github:`36631` - Turn on GPIO from DTS |
| * :github:`36625` - compilation fails while building samples/net/openthread/coprocessor for Arduino nano 33 ble |
| * :github:`36613` - LoRaWAN - Provide method to register a callback for received data |
| * :github:`36609` - could not mount fatfs on efm32pg_stk3402a |
| * :github:`36608` - Unable to compile USB console example with uart_mux |
| * :github:`36606` - Regression in udp socket performance from zephyr v2.3.0 to v2.6.0 |
| * :github:`36600` - Bluetooth: Peripheral: Bond issue when using secure connection |
| * :github:`36598` - Lora driver TX done wait/synchronous call |
| * :github:`36593` - Failing IPv6 Ready compliance (RFC 2460) |
| * :github:`36590` - NVS sector size above 65535 not supported |
| * :github:`36578` - net: ip: Assertion fails when tcp_send_data() with zero length packet |
| * :github:`36575` - Modbus RTU Client on ESP32 |
| * :github:`36572` - kernel: Negative mutex lock_count value |
| * :github:`36570` - Use a custom role for Kconfig configuration options |
| * :github:`36569` - '.. only:' is not working as expected in documentation |
| * :github:`36568` - net: lib: sockets: Assertion fails when zsock_close() |
| * :github:`36565` - ehl_crb: Only boot banner is printed but not the test related details for multiple tests due to PR #36191 is not backported to v2.6.0 release |
| * :github:`36553` - LoRaWAN Sample: join accept but "Join failed" |
| * :github:`36552` - Bluetooth v2.6.0 connectable advertising leak/loss |
| * :github:`36540` - LoRaWAN otaa.app_key belongs to mib_req.Param.AppKey |
| * :github:`36524` - HSE clock doesn't initialize and blinky doesn't run on custom board when moving from zephyr v2.3.0 to v2.6.0 |
| * :github:`36520` - tests/kernel/timer/timer_api/kernel.timer.tickless fails to build on npcx9m6f_evb |
| * :github:`36500` - espressif: cannot install toolchain on Darwin-arm64 |
| * :github:`36496` - bluetooth: only the first Extended Advertising Report with data status "incomplete, more data to come" is issued |
| * :github:`36495` - dtc generates missing #address-cells in interrupt provider warning |
| * :github:`36486` - LOG2 - self referential macro |
| * :github:`36467` - runner mdb-hw not work with arc hsdk board |
| * :github:`36466` - tests/kernel/mem_protect/mem_protect failed with arcmwdt toolchain |
| * :github:`36465` - samples/compression/lz4 failed with arcmwdt toolchian |
| * :github:`36462` - [bluetooth stack][limited_discoverable_advertising timeout] Some problems about the lim_adv_timeout |
| * :github:`36448` - samples: subsys: fs: fat_fs: adafruit_2_8_tft_touch_v2: buildkite compilation failed when no i2c defined |
| * :github:`36447` - net: socket: socketpair: Poll call resetting all events |
| * :github:`36435` - RFC: API Change: Mesh: Add return value for opcode callback |
| * :github:`36427` - test: kernel.common.nano32: zephyr-v2.6.0-286-g46029914a7ac: mimxrt1060_evk: test fails |
| * :github:`36419` - test-ci: net.ethernet_mgmt: zephyr-v2.6.0-286-g46029914a7ac: frdm_k64f: test fails |
| * :github:`36418` - test-ci: net.socket.tls: zephyr-v2.6.0-286-g46029914a7ac: frdm_k64f: test fail |
| * :github:`36417` - tests-ci :coredump.logging_backend : zephyr-v2.6.0-286-g46029914a7ac: lpcxpresso55s28: test failed |
| * :github:`36416` - tests-ci :arch.arm.irq_advanced_features.arm_irq_target_state : zephyr-v2.6.0-286-g46029914a7ac: lpcxpresso55s28: test failed |
| * :github:`36414` - ESP32 with samples/net/wifi gives: net_if: There is no network interface to work with! |
| * :github:`36412` - Blinky on ESP32: Unsupported board: led0 devicetree alias is not defined" |
| * :github:`36410` - board: cc1352r_sensortag: add dts entry for hdc2080 |
| * :github:`36408` - ARM_MPU on boards ``stm32_min_dev_*`` without MPU enabled |
| * :github:`36398` - [Video API] Erroneous function pointer validation |
| * :github:`36390` - net: ip: Negative TCP unacked_len value |
| * :github:`36388` - ARM: Architecture Level user guide |
| * :github:`36382` - segfault when hardware isn't emulated |
| * :github:`36381` - Bluetooth ASSERTION FAIL [evdone] Zephyr v2.6.0 |
| * :github:`36380` - missing auto-dependency on CONFIG_EMUL |
| * :github:`36357` - tests: samples: watchdog: sample.subsys.task_wdt fails on nrf platforms |
| * :github:`36356` - Network fails to transmit STM32H747DISC0 board zephyr v2.6.0 |
| * :github:`36351` - nRF: we do not always guarantee that SystemInit is inlined |
| * :github:`36347` - Zephyr Wifi IoT device - whats a good board to start with? |
| * :github:`36344` - Zephyr 2.6.0 st_ble_sensor sample is broken when compiled for nucleo_wb55rg |
| * :github:`36339` - samples/subsys/logging/dictionary doesn't build under MS Windows environment |
| * :github:`36329` - Support for CC3120 WiFi module |
| * :github:`36324` - add project groups to upsteam west manifest |
| * :github:`36323` - Don't set TFM_CMAKE_BUILD_TYPE_DEBUG by default on LPC55S69-NS if DEBUG_OPTIMIZATIONS |
| * :github:`36319` - Help: Asking for Help Tips page gets 404 error |
| * :github:`36318` - [Coverity CID: 236600] Unused value in drivers/ieee802154/ieee802154_nrf5.c |
| * :github:`36317` - [Coverity CID: 236599] Unused value in drivers/ieee802154/ieee802154_nrf5.c |
| * :github:`36316` - [Coverity CID: 236597] Unused value in drivers/ieee802154/ieee802154_nrf5.c |
| * :github:`36315` - [Coverity CID: 236604] Untrusted value as argument in subsys/net/lib/lwm2m/lwm2m_engine.c |
| * :github:`36314` - [Coverity CID: 236610] Uninitialized pointer read in subsys/bluetooth/mesh/proxy.c |
| * :github:`36313` - [Coverity CID: 236602] Unchecked return value in drivers/modem/gsm_ppp.c |
| * :github:`36312` - [Coverity CID: 236608] Out-of-bounds access in subsys/bluetooth/audio/mics_client.c |
| * :github:`36311` - [Coverity CID: 236598] Out-of-bounds access in subsys/bluetooth/audio/mics_client.c |
| * :github:`36310` - [Coverity CID: 236607] Missing break in switch in drivers/ieee802154/ieee802154_nrf5.c |
| * :github:`36309` - [Coverity CID: 236606] Missing break in switch in drivers/ieee802154/ieee802154_nrf5.c |
| * :github:`36308` - [Coverity CID: 236601] Missing break in switch in drivers/ieee802154/ieee802154_nrf5.c |
| * :github:`36307` - [Coverity CID: 236605] Logically dead code in subsys/bluetooth/audio/mics.c |
| * :github:`36306` - [Coverity CID: 236596] Logically dead code in subsys/bluetooth/audio/mics.c |
| * :github:`36305` - [Coverity CID: 236595] Logically dead code in samples/drivers/eeprom/src/main.c |
| * :github:`36304` - [Coverity CID: 236609] Explicit null dereferenced in subsys/bluetooth/audio/mics_client.c |
| * :github:`36303` - [Coverity CID: 236603] Dereference after null check in subsys/bluetooth/audio/vcs_client.c |
| * :github:`36301` - soc: cypress: Port Zephyr to Cypress CYW43907 |
| * :github:`36298` - TF-M integration: add a brief user guide |
| * :github:`36291` - ADC and math library functions use for stm32l496 |
| * :github:`36289` - eswifi gets a deadlock on b_l4s5i_iot01a target |
| * :github:`36282` - Overwrite mode for RTT logging |
| * :github:`36278` - ARM: Cortex-M: SysTick priority is not initialized if the SysTick is not used |
| * :github:`36276` - NULL pointer access in check_used_port() |
| * :github:`36270` - TF-M: introduce uniformity in Non-Secure target names |
| * :github:`36267` - net: ieee802154: software address filtering |
| * :github:`36263` - up_squared: kernel.memory_protection.mem_map.x86_64 failed. |
| * :github:`36256` - SPI4 & 3 MISO not working on nRF5340 |
| * :github:`36255` - tests/subsys/logging/log_core failed on hsdk board |
| * :github:`36254` - Zephyr shell subsystem not work with ARC hardware boards. |
| * :github:`36250` - tests/subsys/cpp/cxx - doesn't compile on native_posix when CONFIG_EXCEPTIONS=y |
| * :github:`36247` - samples: usb: testusb: Problems with using with cdc-acm |
| * :github:`36242` - Zephyr Upstream + sdk-nrf BLE NUS SHELL LOG/CBPRINTF build problem. |
| * :github:`36238` - net_if.c: possible mutex deadlock |
| * :github:`36237` - fs_open returns 0 on existing file with FS_O_CREATE | FS_O_WRITE |
| * :github:`36197` - BOSSA flashing on Arduino Nano 33 BLE (NRF52840) |
| * :github:`36185` - CMP0116 related warnings |
| * :github:`36172` - net: ieee802154: LL src/dst address is lost from received net_pkt (when using 6LO) |
| * :github:`36163` - nvs no longer supports the use of id=0xffff |
| * :github:`36131` - Occasionally unable to scan for extended advertisements when connected |
| * :github:`36117` - toolchain: The added abstraction for llvm, breaks builds with off-tree llvm based toolchains |
| * :github:`36107` - ehl_crb: Multiple tests are failing and board is not booting up. |
| * :github:`36101` - tfm related build rebuild even if nothing changes |
| * :github:`36100` - pb_gatt buf_send does not call callback |
| * :github:`36095` - drivers: pwm: sam: compilation failure for sam_v71b_xult |
| * :github:`36094` - BLE wrong connections intervals on multible connections |
| * :github:`36093` - Fix dt_compat_enabled_with_label behavior (or usage) |
| * :github:`36089` - intel_adsp_cavs25: support more than 2 DSP cores |
| * :github:`36088` - intel_adsp_cavs25: secondary boot fails in arch_start_cpu() |
| * :github:`36084` - Arduino Nano 33 BLE: USB gets disconnected after flashing |
| * :github:`36078` - coredump.logging_backend: lpcxpresso55s28: test failure assertion fail |
| * :github:`36077` - net: lib: coap: Impossible to get socket info from incoming packet |
| * :github:`36075` - drivers: can: stm32fd: can2 does not work |
| * :github:`36074` - LoRaWAN: sx126x: infinite loop on CRC error |
| * :github:`36061` - Undefined reference to ``z_priq_rb_lessthan(rbnode*, rbnode*)`` when using k_timer_start in cpp file. |
| * :github:`36057` - Zephyr Shell Console and Logging Targeting Isolated Different Device Interfaces |
| * :github:`36048` - Cannot establish ISO CIS connection properly after ACL disconnected several times |
| * :github:`36038` - iotdk: the testcase samples/modules/nanopb can't build |
| * :github:`36037` - bt_init returning success when Bluetooth initialization does not get finalized. |
| * :github:`36035` - struct devices should be allocated in ROM, not RAM |
| * :github:`36033` - Mere warnings slow down incremental documentation build from seconds to minutes |
| * :github:`36030` - West warnings (and others?) are ignored when building documentation |
| * :github:`36028` - More Description in Example Documentation |
| * :github:`36026` - wolfssl / wolfcrypt |
| * :github:`36022` - Wrong channel index in connectionless IQ samples report |
| * :github:`36014` - stm32g050: Missing closing parenthesis for soc prototype |
| * :github:`36013` - arm: qemu: run cmsis-dsp tests on the qemu target with FPU |
| * :github:`35999` - Unexpected Bluetooth disconnection and removal of bond |
| * :github:`35992` - stm32f303k8 device tree missing DACs |
| * :github:`35986` - POSIX: multiple definition of posix_types |
| * :github:`35983` - [backport v1.14-branch] backport of #35935 failed |
| * :github:`35978` - ESP32 SPI send data hangup |
| * :github:`35972` - C++ exceptions do not work when building with GNU Arm Embedded |
| * :github:`35971` - ehl_crb: test_nop is failing under tests/kernel/common/ |
| * :github:`35970` - up_squared: samples/boards/up_squared/gpio_counter/ is failing |
| * :github:`35964` - shell_uart hangs when putting UART into PM_LOW_POWER_STATE / PM_DEVICE_STATE_LOW_POWER |
| * :github:`35962` - drivers using deprecated Kconfigs |
| * :github:`35955` - Bluetooth: Controller: Regression in connection setup |
| * :github:`35949` - can: mcan: sjw-data devicetree configuration is not written correctly |
| * :github:`35945` - SPI4 on nRF5340 not working when using k_sleep() in main |
| * :github:`35941` - subsys: tracing: sysview: No SEGGER_SYSVIEW.h in path |
| * :github:`35939` - enc424j600 driver unusable/broken on stm32l552 |
| * :github:`35931` - Bluetooth: controller: Assertion in ull_master.c |
| * :github:`35930` - nRF Dongle as BLE Central Unstable Connectivity at Long-ish Range |
| * :github:`35926` - Shell tab-completion with more than two levels of nested dynamic commands fails |
| * :github:`35916` - drivers: TI cc13xx_cc26xx: build error when PM is enabled (serial, entropy, spi, i2c modules) |
| * :github:`35908` - Stopping DHCP with network interface goes down leaves networking state in a broken state |
| * :github:`35897` - Bluetooth: PTS Tester on native posix |
| * :github:`35890` - Build system ignores explicit ZephyrBuildConfiguration_ROOT variable |
| * :github:`35880` - PSA tests run indefinitely when CONFIG_TFM_IPC=y |
| * :github:`35870` - Build failure with gcc 11.x on native_posix |
| * :github:`35857` - intel_adsp_cavs15: run msgq testcases failed on ADSP |
| * :github:`35856` - intel_adsp_cavs15: run semaphore testcases failed on ADSP |
| * :github:`35850` - the sample kernel/metairq_dispatch fails on nucleo_g474re |
| * :github:`35835` - ADC support for STM32l496_disco board |
| * :github:`35809` - sample: USB audio samples are not working on STM32 |
| * :github:`35793` - kernel.scheduler.multiq: Failed since #35276 ("cooperative scheduling only" special cases removal) |
| * :github:`35789` - sockets_tls: receiving data on offloaded socket before handshake causes pollin | pollerr and failed recvfrom (SARA-R4) |
| * :github:`35721` - Atmel sam0 Async and/or DMA may not work |
| * :github:`35720` - tests:kernel timer fails on test_sleep_abs with TICKLESS_KERNEL and PM on nucleo_wb55rg |
| * :github:`35718` - Excessive error messages from filesystem interface |
| * :github:`35711` - net: sockets: dtls: handshake not reset as it ought to be |
| * :github:`35707` - AssertionError: zephyr/tests/kernel/common test case is failing with gcc-11 (Yocto) |
| * :github:`35703` - posix_apis: fails at test_posix_realtime for mimxrt1024_evk |
| * :github:`35681` - Unable to get output for samples/subsys/logging/logger and samples/philosophers |
| * :github:`35668` - The channel selection of auxiliary advertisments in extended advertisments |
| * :github:`35663` - STM32H7: Support memory protection unit(MPU) to enable shared memory |
| * :github:`35658` - arch.interrupt.arm.irq_vector_table.arm_irq_vector_table: MPU FAULT Halting system for mximxrt685_evk_cm33 |
| * :github:`35656` - arch.interrupt.arm.arm_interrupt: hangs on mimxrt685_evk_cm33 |
| * :github:`35581` - stm32 SPI problems with DMA and INTR set-up |
| * :github:`35550` - nRF91: DPS310 I2C driver not working |
| * :github:`35532` - SSL Handshake error with modified http(s) client example |
| * :github:`35529` - STM32: STM32H7 ADC calibration must be performed on startup |
| * :github:`35429` - subsys: settings: Encryption |
| * :github:`35377` - add creg_gpio driver for ARC HSDK board |
| * :github:`35354` - Adding support for measurement of Ultraviolet(UV) Light. |
| * :github:`35293` - Sporadic boot failure |
| * :github:`35256` - DOC: DATA PASSING TABLE MISSING THE OBJECT QUEUES |
| * :github:`35250` - Twister is not reading the serial line output completely |
| * :github:`35244` - twister: build failure for native_posix with GNU binutils 2.35 |
| * :github:`35238` - ieee802.15.4 support for stm32wb55 |
| * :github:`35229` - twister log mixing between tests |
| * :github:`35190` - echo_server sample non-functional rails all CPUs on native_posix_64 board build |
| * :github:`35055` - STM32L432KC Nucleo Reference board SWD problem after programming with Zephyr |
| * :github:`34917` - arch.interrupt.arm| arch.interrupt.extra_exception_info: lpcxpresso55s28 series: test failure |
| * :github:`34913` - ModuleNotFoundError: No module named 'elftools' |
| * :github:`34879` - mec15xxevb_assy6853: 2 GPIO test failures |
| * :github:`34855` - FANSTEL BT840X |
| * :github:`34832` - Coding Guideline - MISRA rule 14.4 not applied properly |
| * :github:`34829` - Bluetooth: ISO: Don't attempt to remove the ISO data path of a disconnected ISO channel |
| * :github:`34767` - C++ support on ESP boards |
| * :github:`34760` - Hawkbit not downloading large files |
| * :github:`34659` - Bluetooth: HCI cmd response timeout |
| * :github:`34571` - Twister mark successfully passed tests as failed |
| * :github:`34557` - upgrade fatfs to 0.14b |
| * :github:`34554` - Settings FS: Duplicate finding is extremely slow when dealing with larger number of settings entries |
| * :github:`34544` - lib: gui: lvgl: buffer overflow bug on misconfiguration |
| * :github:`34543` - STM32F1 failed to compile with CONFIG_UART_ASYNC_API |
| * :github:`34392` - [backport v2.5-branch] backport of #34237 failed |
| * :github:`34391` - [backport v1.14-branch] backport of #34237 failed |
| * :github:`34390` - i2s: bitrate is wrongly configured on STM32 |
| * :github:`34372` - CPU Lockups when using own Log Backend |
| * :github:`34354` - Please investigate adding DMA support to STM32 I2C! |
| * :github:`34324` - RTT is not working on STM32 |
| * :github:`34315` - BMI270 configuration file sending to I2C seems to be not handling the last part of the configuration properly. |
| * :github:`34305` - Shell [modem send] command causes shell to hang after about 10 seconds, Sara R4 - Particle Boron |
| * :github:`34282` - HAL Module Request: hal_telink |
| * :github:`34273` - mqtt_publisher: Unable to connect properly on EC21 modem with bg9x driver |
| * :github:`34269` - LOG_MODE_MINIMAL BUILD error |
| * :github:`34268` - Bluetooth: Mesh: Sample is stuck in init process on disco_l475_iot |
| * :github:`34259` - Problem running code with memory domain |
| * :github:`34239` - Call settings_save_one in the system work queue, which will cause real-time performance degradation. |
| * :github:`34236` - External source code integration request: Raspberry Pi Pico SDK |
| * :github:`34231` - uzlib (decompression library) |
| * :github:`34226` - Compile error when building civetweb http_server sample for posix_native |
| * :github:`34222` - Commit related to null pointer exception detection causing UART issues |
| * :github:`34218` - Civetweb server crashing when trying to access invalid resource |
| * :github:`34204` - nvs_write: Bad documented return value. |
| * :github:`34192` - Sensor BME680: Add support for SPI operation |
| * :github:`34134` - USB do not works if bootloader badly use the device before |
| * :github:`34131` - TFTP client ignores incoming data packets |
| * :github:`34121` - Unable to generate pdf according to the documentation steps on windows |
| * :github:`34105` - Convert tests/kernel/workq to new kwork API |
| * :github:`34049` - Nordic nrf9160 switching between drivers and peripherals |
| * :github:`34015` - cfb sample "Device not found" for esp32 when SSD1306 is enabled |
| * :github:`33994` - kscan_ft5336 doesn't provide proper up/down information when polling, and hogs resources in interrupt mode |
| * :github:`33960` - Zephyr for Briey SoC |
| * :github:`33937` - [backport v1.14-branch] backport of #26712 failed |
| * :github:`33932` - [backport v1.14-branch] backport of #26083 failed |
| * :github:`33910` - sam_v71_xult -> I2C_1 hang during scanning i2c devices |
| * :github:`33901` - tests: interrupt: irq_enable() and irq_disable() do not work with direct and regular interrupt on x86 |
| * :github:`33895` - Device tree: STM32L412 and STM32L422 are missing nodes |
| * :github:`33883` - [backport v2.5-branch] backport of #33340 failed |
| * :github:`33876` - Lora sender sample build error for esp32 |
| * :github:`33873` - arm_arch_timer: Too many clock announcements with CONFIG_TICKLESS_KERNEL=n on SMP |
| * :github:`33862` - [backport v2.5-branch] backport of #33771 failed |
| * :github:`33753` - LVGL output doesn't match the LVGL TFT simulator for gauge widget |
| * :github:`33652` - Monitoring the BLE connection |
| * :github:`33573` - JSON_OBJ_DESCR_ARRAY_ARRAY is dangerously broken |
| * :github:`33554` - Request to add OM13056 board (LPC1500 family or specifically SoC LPC1519) support to Zephyr |
| * :github:`33544` - ehl_crb: portability.posix.common.posix_realtime failed. |
| * :github:`33485` - Issue with DMA transfers outside of the Zephyr DMA driver on STM32F767 |
| * :github:`33483` - TIMESLICE and PM interaction and expected behavior |
| * :github:`33449` - Remove deprecated items in 2.7 |
| * :github:`33440` - lsm6dso sensor driver not working on nRF5340 |
| * :github:`33435` - armclang / armlinker |
| * :github:`33337` - twister: Find and fix all "dead" samples/tests |
| * :github:`33275` - ehl_crb: samples/subsys/shell/shell_module does not work |
| * :github:`33265` - Power Management Overhaul |
| * :github:`33192` - LoRaWAN - Application fails to start if module is not powered |
| * :github:`33113` - Improve code coverage for new feature or code change in kernel |
| * :github:`33104` - Updating Zephyr to fix Work Queue Problems |
| * :github:`33099` - ppp: termination packet not sent |
| * :github:`33052` - [Coverity CID :219624] Untrusted loop bound in subsys/bluetooth/host/sdp.c |
| * :github:`33041` - [Coverity CID :219645] Untrusted loop bound in subsys/bluetooth/host/sdp.c |
| * :github:`33016` - spi_nor: CONFIG_SPI_NOR_SFDP_RUNTIME leaves flash in Standby after spi_nor_configure() |
| * :github:`33015` - spi_nor driver: SPI_NOR_IDLE_IN_DPD breaks SPI_NOR_SFDP_RUNTIME |
| * :github:`32997` - Improve documentation search experience |
| * :github:`32990` - FS/littlefs: it is possible to write to already deleted file |
| * :github:`32984` - West: openocd runner: Don't let debug mode on by default |
| * :github:`32875` - Benchmarking Zephyr vs. RIOT-OS |
| * :github:`32836` - Remaining integration failures on intel_adsp_cavs15 |
| * :github:`32822` - Code doesn't compile after changing the PWM pin on example "blinky_pwm" on NRF52 |
| * :github:`32803` - Extend mcux uart drivers to support async API |
| * :github:`32789` - USB DFU support w/o MPU support |
| * :github:`32733` - RS-485 support |
| * :github:`32669` - [Bluetooth] sample code for Periodic Advertising Sync Transfer |
| * :github:`32603` - acrn_ehl_crb: test case of arch.interrupt.prevent_interruption failed |
| * :github:`32564` - net_buf reference count not protected |
| * :github:`32545` - It seems that CONFIG_IMG_MGMT_VERBOSE_ERR does not work |
| * :github:`32531` - get_maintainer.py cannot parse MAINTAINERS.yml |
| * :github:`32293` - Zephyr 2.6 Release Checklist |
| * :github:`32289` - USDHC: Fails after reset |
| * :github:`32282` - x86 ACPI images are much too large |
| * :github:`32261` - problem with CONFIG_STACK_SENTINEL |
| * :github:`32133` - Current atomics are subtly broken on AArch64 due to memory ordering |
| * :github:`32111` - Zephyr build fail with LLVM on Windows |
| * :github:`32035` - Bluetooth: application notification when MTU updated |
| * :github:`31993` - Add west extension to parse yml file |
| * :github:`31985` - riscv: Long execution time when TICKLESS_KERNEL=y |
| * :github:`31943` - drivers: flash: stm32: harmonization of flash erase implementation across STM32 series |
| * :github:`31739` - Convert CoAP unit tests to use ztest API |
| * :github:`31593` - civetweb hangs when there are no free filedescriptors |
| * :github:`31499` - lwm2m : Add visibility into observer notification success/fail |
| * :github:`31475` - TCP keepalive |
| * :github:`31473` - Failed phy request not retried and may prevent DLE procedure during auto-initiation |
| * :github:`31447` - MQTT idling gets disconnected when using TCP2 |
| * :github:`31290` - dts: arm: st: standardize pwm default property st,prescaler to 0 |
| * :github:`31253` - lis3dh driver support is confusing |
| * :github:`31162` - Mapping between existing and new system power management states |
| * :github:`31107` - libc: minimal: add qsort routine |
| * :github:`31043` - Infinite loop in modem cmd_handler_process |
| * :github:`30921` - west flash failed with an open ocd error |
| * :github:`30861` - drivers: uart: increase timeout precision in uart_rx_enable |
| * :github:`30635` - cpu_stats: Change from printk to ``LOG_*`` |
| * :github:`30429` - Thread Border Router with NRC/RCP sample and nrf52840dk not starting |
| * :github:`30367` - TCP2 does not send our MSS to peer |
| * :github:`30245` - Bluetooth: controller: event scheduling pipeline preemption by short schedule |
| * :github:`30244` - Bluetooth: controller: Extended scan window time reservation prevents auxiliary channel reception |
| * :github:`30243` - Bluetooth: controller: IRK resolution in extended scanning breaks auxiliary PDU reception |
| * :github:`30236` - Main thread sometimes looping forever before user application is reached when using UDP and IPv6 on Nucleo F767ZI |
| * :github:`30209` - TCP2 : How to add MSS option on sending [SYN, ACK] to client? |
| * :github:`30066` - CI test build with RAM overflow |
| * :github:`30026` - Can not make multiple BLE IPSP connection to the same host |
| * :github:`29545` - samples: tfm_integration: tfm_ipc: No module named 'cryptography.hazmat.primitives.asymmetric.ed25519' |
| * :github:`29535` - riscv: stack objects are mis-aligned |
| * :github:`29520` - make k_current_get() work without a system call |
| * :github:`29397` - Build all tests of module mcuboot |
| * :github:`28872` - Support ESP32 as Bluetooth controller |
| * :github:`28819` - memory order and consistency promises for Zephyr atomic API? |
| * :github:`28729` - ARM: Core Stack Improvements/Bug fixes for 2.6 release |
| * :github:`28716` - 2.5 Release Checklist |
| * :github:`28312` - Add option to enable ART Accelerator on STM32 FLASH controller |
| * :github:`27992` - stm32f7: usb: Bursting HID Get and Set report requests leads to unresponding Control endpoint. |
| * :github:`27525` - Including STM32Cube's USB PD support to Zephyr |
| * :github:`27415` - Decide if we keep a single thread support (CONFIG_MULTITHREADING=n) in Zephyr |
| * :github:`27176` - [v1.14] Restore socket descriptor permission management |
| * :github:`27015` - Add custom transport support for MQTT |
| * :github:`26981` - Problem with PPP + GSM MUX with SIMCOM7600E |
| * :github:`26585` - IPv4 multicast datagrams can't be received for mimxrt1064_evk board (missing ethernet API) |
| * :github:`26256` - NRF51822 BLE Micro module: hangs on k_msleep() (RTC counter not working) |
| * :github:`26136` - CMake Error in Windows Environment |
| * :github:`26051` - shell: uart: Allow a change in the shell initalisation to let routing it through USB UART |
| * :github:`25832` - [test][kernel][lpcxpresso55s69_ns] kernel cases meet ESF could not be retrieved successfully |
| * :github:`25182` - Raspberry Pi 4B Support |
| * :github:`25015` - Bluetooth Isochronous Channels Support |
| * :github:`24854` - docs: Using third-party libraries not well documented in Memory partitions docs |
| * :github:`24733` - Misconfigured environment |
| * :github:`24200` - USB GET_INTERFACE response always 0, even when an alternate setting is used |
| * :github:`24051` - double to sensor_val |
| * :github:`23745` - Align PS/2 handlers with the handlers found in other drivers |
| * :github:`23723` - Poor sinf/cosf performance compared to the Segger math libraries |
| * :github:`23349` - Question: How to add external soc, board, DTS, drivers and libs? |
| * :github:`22731` - Improve docker CI documentation |
| * :github:`22705` - Implement counter driver for lpcxpresso55s69 |
| * :github:`22702` - Implement I2S driver for lpcxpresso55s69 |
| * :github:`22455` - How to assign USB endpoint address manually in stm32f4_disco for CDC ACM class driver |
| * :github:`22210` - Bluetooth - bt_gatt_get_value_attr_by_uuid |
| * :github:`22131` - ARM Cortex_R: CONFIG_USERSPACE: external interrupts are disabled during system calls |
| * :github:`21869` - IPv6 neighbors get added too eagerly |
| * :github:`21648` - improve documentation on meta-IRQ threads |
| * :github:`21519` - RFC: libc: thread-safe newlib |
| * :github:`21339` - Expired IPv6 router causes an infinite loop |
| * :github:`21293` - adding timeout the I2C read/write functions for the stm32 port |
| * :github:`21205` - get_device_list only available if power management invoked |
| * :github:`21167` - libraries.libc.newlib test fails |
| * :github:`20576` - DTS overlay files must include full path name |
| * :github:`20409` - USB: Create webusb shell |
| * :github:`20236` - usb: api: Cleanup of current inclusion path for USB |
| * :github:`20171` - support external spi nor flash on mimxrt1060-evk |
| * :github:`19882` - Add support for multiple channel sampling to STM32 ADC driver |
| * :github:`19328` - Logger could block in thread at certain log message pool usage |
| * :github:`18960` - [Coverity CID :203908]Error handling issues in /lib/libc/newlib/libc-hooks.c |
| * :github:`18896` - Concurrent Multi-Protocol Support NRF52840 |
| * :github:`18850` - Bluetooth: controller: Advertiser following directed advertiser will have corrupt data |
| * :github:`18386` - [Coverity CID :203443]Memory - corruptions in /subsys/bluetooth/host/rfcomm.c |
| * :github:`18351` - logging: 32 bit float values don't work. |
| * :github:`18316` - Support for unregistering bt_conn callbacks |
| * :github:`18042` - Only corporate members can join the slack channel |
| * :github:`17748` - stm32: clock-control: Remove usage of SystemCoreClock |
| * :github:`17692` - Proper way for joining a multicast group (NRF52840/OpenThread) |
| * :github:`17375` - Add VREF, TEMPSENSOR, VBAT internal channels to the stm32 adc driver |
| * :github:`17021` - revise concurrency control in kernel/userspace.c |
| * :github:`16761` - nrf52840 usb driver with openthread |
| * :github:`16671` - ideas for future of the settings |
| * :github:`16231` - Add CONFIG_UART_DYNAMIC_SETTINGS option |
| * :github:`15841` - Support AT86RF233 |
| * :github:`15793` - Unable to load binaries into iotdk |
| * :github:`15676` - Support instrumentation for time spent in various power states |
| * :github:`15555` - Counter Docs Missing Callback Context Note |
| * :github:`14308` - Better integration between system and device power modes. |
| * :github:`12405` - add test to catch issues fixed in PR #12384 |
| * :github:`11773` - Add Bluetooth support for Silicon Labs EFR32MG12 |
| * :github:`11702` - Add support for nrfx i2s driver |
| * :github:`11519` - Add at least build test for cc1200 |
| * :github:`11193` - ARM V8M Trusted Execution Environments and Zephyr |
| * :github:`11028` - CONFIG_LOAPIC_SPURIOUS_VECTOR not being tested |
| * :github:`11000` - USB 2.0 high-speed support in Zephyr |
| * :github:`10930` - Extending string formatting function |
| * :github:`10676` - Feature Required: DFU over Thread network |
| * :github:`10378` - watchdog: Limitation with the current watchdog API for Nordic devices |
| * :github:`10324` - Publish PDF with the release doc build |
| * :github:`10198` - Add support for FRDM-STBC-AGM01 sensor shield |
| * :github:`8876` - Adapt net/l2/ieee802154 subsystem to new shell subsystem |
| * :github:`8275` - when zephyr can support popular IDE develop? |
| * :github:`7001` - ST Sensors: Driver factorization |
| * :github:`6777` - Add copyright handling to contributing doc |
| * :github:`6657` - Question: Is Bluetooth avrcp supported in Zephyr? Or any plan? |
| * :github:`6493` - need APIs for ranged random number generation |
| * :github:`6450` - Several devices of same type on same bus - how to address? |
| * :github:`6117` - Make sanitycheck aware of DTS and HW support |
| * :github:`4911` - Filesystem support for qemu |
| * :github:`1392` - No module named 'elftools' |
| * :github:`3886` - Add mutual authentication to net/crypto examples |
| * :github:`3885` - Add real entropy to crypto-based net samples |
| * :github:`3884` - Improve the TLS and DTLS examples to use best practices on security |
| * :github:`3879` - k_thread_abort vs k_thread->fn_abort() |
| * :github:`3677` - Implement HCI Zephyr extensions |
| * :github:`3199` - xtensa: simplify linker scripts |
| * :github:`2811` - Investigate having timeout code track tick deadlines instead of deltas |
| * :github:`2619` - Define APIs for hashing/ Message Authentication |
| * :github:`2248` - Split LE Controller: style fixes |
