| /* |
| * Copyright (c) 2016, Intel Corporation |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright notice, |
| * this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright notice, |
| * this list of conditions and the following disclaimer in the documentation |
| * and/or other materials provided with the distribution. |
| * 3. Neither the name of the Intel Corporation nor the names of its |
| * contributors may be used to endorse or promote products derived from this |
| * software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE INTEL CORPORATION OR CONTRIBUTORS BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #ifndef __FLASH_LAYOUT_H__ |
| #define __FLASH_LAYOUT_H__ |
| |
| /** |
| * Flash Layout for Quark D2000 Microcontrollers. |
| * |
| * @defgroup groupD2000Flash Quark D2000 Flash Layout |
| * @{ |
| */ |
| |
| typedef struct { |
| QM_RW uint16_t osc_trim_16mhz; /**< 16MHz Oscillator trim code. */ |
| QM_RW uint16_t osc_trim_32mhz; /**< 32MHz Oscillator trim code. */ |
| QM_RW uint16_t osc_trim_4mhz; /**< 4MHz Oscillator trim code. */ |
| QM_RW uint16_t osc_trim_8mhz; /**< 8MHz Oscillator trim code. */ |
| } qm_flash_otp_trim_t; |
| |
| #if (UNIT_TEST) |
| extern uint8_t test_flash_page[0x800]; |
| #define QM_FLASH_OTP_TRIM_CODE_BASE (&test_flash_page[0]) |
| #else |
| #define QM_FLASH_OTP_TRIM_CODE_BASE (0x4) |
| #endif |
| |
| #define QM_FLASH_OTP_TRIM_CODE \ |
| ((qm_flash_otp_trim_t *)QM_FLASH_OTP_TRIM_CODE_BASE) |
| #define QM_FLASH_OTP_SOC_DATA_VALID (0x24535021) /* $SP! */ |
| #define QM_FLASH_OTP_TRIM_MAGIC (QM_FLASH_OTP_SOC_DATA_VALID) |
| |
| typedef union { |
| struct trim_fields { |
| QM_RW uint16_t |
| osc_trim_32mhz; /**< 32MHz Oscillator trim code. */ |
| QM_RW uint16_t |
| osc_trim_16mhz; /**< 16MHz Oscillator trim code. */ |
| QM_RW uint16_t osc_trim_8mhz; /**< 8MHz Oscillator trim code. */ |
| QM_RW uint16_t osc_trim_4mhz; /**< 4MHz Oscillator trim code. */ |
| } fields; |
| QM_RW uint32_t osc_trim_u32[2]; /**< Oscillator trim code array.*/ |
| QM_RW uint16_t osc_trim_u16[4]; /**< Oscillator trim code array.*/ |
| } qm_flash_data_trim_t; |
| |
| #if (UNIT_TEST) |
| #define QM_FLASH_DATA_TRIM_BASE (&test_flash_page[100]) |
| #define QM_FLASH_DATA_TRIM_OFFSET (100) |
| #else |
| #define QM_FLASH_DATA_TRIM_BASE (QM_FLASH_REGION_DATA_0_BASE) |
| #define QM_FLASH_DATA_TRIM_OFFSET ((uint32_t)QM_FLASH_DATA_TRIM_BASE & 0x3FFFF) |
| #endif |
| |
| #define QM_FLASH_DATA_TRIM ((qm_flash_data_trim_t *)QM_FLASH_DATA_TRIM_BASE) |
| #define QM_FLASH_DATA_TRIM_CODE (&QM_FLASH_DATA_TRIM->fields) |
| #define QM_FLASH_DATA_TRIM_REGION QM_FLASH_REGION_DATA |
| |
| #define QM_FLASH_TRIM_PRESENT_MASK (0xFC00) |
| #define QM_FLASH_TRIM_PRESENT (0x7C00) |
| |
| /* |
| * Bootloader data |
| */ |
| |
| /* The flash controller where BL-Data is stored. */ |
| #define BL_DATA_FLASH_CONTROLLER QM_FLASH_0 |
| /* The flash region where BL-Data is stored. */ |
| #define BL_DATA_FLASH_REGION QM_FLASH_REGION_DATA |
| /* The flash address where the BL-Data Section starts. */ |
| #define BL_DATA_FLASH_REGION_BASE QM_FLASH_REGION_DATA_0_BASE |
| /* The flash page where the BL-Data Section starts. */ |
| #define BL_DATA_SECTION_BASE_PAGE (0) |
| |
| /* The size (in pages) of the System flash region of Quark D2000. */ |
| #define QM_FLASH_REGION_SYS_0_PAGES (16) |
| |
| /* The size of each flash partition for Lakemont application code. */ |
| #if (BL_CONFIG_DUAL_BANK) |
| #define BL_PARTITION_SIZE_LMT (QM_FLASH_REGION_SYS_0_PAGES / 2) |
| #else /* !BL_CONFIG_DUAL_BANK */ |
| #define BL_PARTITION_SIZE_LMT (QM_FLASH_REGION_SYS_0_PAGES) |
| #endif /* BL_CONFIG_DUAL_BANK */ |
| |
| /* Number of boot targets. */ |
| #define BL_BOOT_TARGETS_NUM (1) |
| |
| #define BL_TARGET_IDX_LMT (0) |
| |
| #define BL_PARTITION_IDX_LMT0 (0) |
| #define BL_PARTITION_IDX_LMT1 (1) |
| |
| #define BL_TARGET_0_LMT \ |
| { \ |
| .active_partition_idx = BL_PARTITION_IDX_LMT0, .svn = 0 \ |
| } |
| |
| #define BL_PARTITION_0_LMT0 \ |
| { \ |
| .target_idx = BL_TARGET_IDX_LMT, .controller = QM_FLASH_0, \ |
| .first_page = 0, .num_pages = BL_PARTITION_SIZE_LMT, \ |
| .start_addr = (uint32_t *)QM_FLASH_REGION_SYS_0_BASE, \ |
| .is_consistent = true, \ |
| } |
| |
| #define BL_PARTITION_1_LMT1 \ |
| { \ |
| .target_idx = BL_TARGET_IDX_LMT, .controller = QM_FLASH_0, \ |
| .first_page = BL_PARTITION_SIZE_LMT, \ |
| .num_pages = BL_PARTITION_SIZE_LMT, \ |
| .start_addr = \ |
| (uint_32_t *)QM_FLASH_REGION_SYS_0_BASE + \ |
| (BL_PARTITION_SIZE_LMT * QM_FLAH_PAGE_SIZE_DWORDS), \ |
| .is_consistent = true, \ |
| } |
| |
| #define BL_TARGET_LIST \ |
| { \ |
| BL_TARGET_0_LMT \ |
| } |
| |
| #if (BL_CONFIG_DUAL_BANK) |
| #define BL_PARTITION_LIST \ |
| { \ |
| BL_PARTITION_0_LMT0, BL_PARTITION_1_LMT1 \ |
| } |
| #else /* !BL_CONFIG_DUAL_BANK */ |
| #define BL_PARTITION_LIST \ |
| { \ |
| BL_PARTITION_0_LMT0 \ |
| } |
| #endif /* BL_CONFIG_DUAL_BANK */ |
| |
| /** |
| * @} |
| */ |
| |
| #endif /* __FLASH_LAYOUT_H__ */ |
