drivers/serial/uart_sifive.c - third_party/github/zephyrproject-rtos/zephyr - Git at Google

 /*
  * Copyright (c) 2017 Jean-Paul Etienne <fractalclone@gmail.com>
  *
  * SPDX-License-Identifier: Apache-2.0
  */

 /**
  * @brief UART driver for the SiFive Freedom Processor
  */

 #define DT_DRV_COMPAT sifive_uart0

 #include <kernel.h>
 #include <arch/cpu.h>
 #include <drivers/uart.h>

 #define RXDATA_EMPTY   (1 << 31)   /* Receive FIFO Empty */
 #define RXDATA_MASK    0xFF        /* Receive Data Mask */

 #define TXDATA_FULL    (1 << 31)   /* Transmit FIFO Full */

 #define TXCTRL_TXEN    (1 << 0)    /* Activate Tx Channel */

 #define RXCTRL_RXEN    (1 << 0)    /* Activate Rx Channel */

 #define IE_TXWM        (1 << 0)    /* TX Interrupt Enable/Pending */
 #define IE_RXWM        (1 << 1)    /* RX Interrupt Enable/Pending */

 /*
  * RX/TX Threshold count to generate TX/RX Interrupts.
  * Used by txctrl and rxctrl registers
  */
 #define CTRL_CNT(x)    (((x) & 0x07) << 16)

 struct uart_sifive_regs_t {
 	uint32_t tx;
 	uint32_t rx;
 	uint32_t txctrl;
 	uint32_t rxctrl;
 	uint32_t ie;
 	uint32_t ip;
 	uint32_t div;
 };

 #ifdef CONFIG_UART_INTERRUPT_DRIVEN
 typedef void (*irq_cfg_func_t)(void);
 #endif

 struct uart_sifive_device_config {
 	uintptr_t   port;
 	uint32_t       sys_clk_freq;
 	uint32_t       baud_rate;
 	uint32_t       rxcnt_irq;
 	uint32_t       txcnt_irq;
 #ifdef CONFIG_UART_INTERRUPT_DRIVEN
 	irq_cfg_func_t cfg_func;
 #endif
 };

 struct uart_sifive_data {
 #ifdef CONFIG_UART_INTERRUPT_DRIVEN
 	uart_irq_callback_user_data_t callback;
 	void *cb_data;
 #endif
 };

 #define DEV_CFG(dev)						\
 	((const struct uart_sifive_device_config * const)	\
 	 (dev)->config)
 #define DEV_UART(dev)						\
 	((struct uart_sifive_regs_t *)(DEV_CFG(dev))->port)
 #define DEV_DATA(dev)						\
 	((struct uart_sifive_data * const)(dev)->data)

 /**
  * @brief Output a character in polled mode.
  *
  * Writes data to tx register if transmitter is not full.
  *
  * @param dev UART device struct
  * @param c Character to send
  */
 static void uart_sifive_poll_out(const struct device *dev,
 					 unsigned char c)
 {
 	volatile struct uart_sifive_regs_t *uart = DEV_UART(dev);

 	/* Wait while TX FIFO is full */
 	while (uart->tx & TXDATA_FULL) {
 	}

 	uart->tx = (int)c;
 }

 /**
  * @brief Poll the device for input.
  *
  * @param dev UART device struct
  * @param c Pointer to character
  *
  * @return 0 if a character arrived, -1 if the input buffer if empty.
  */
 static int uart_sifive_poll_in(const struct device *dev, unsigned char *c)
 {
 	volatile struct uart_sifive_regs_t *uart = DEV_UART(dev);
 	uint32_t val = uart->rx;

 	if (val & RXDATA_EMPTY) {
 		return -1;
 	}

 	*c = (unsigned char)(val & RXDATA_MASK);

 	return 0;
 }

 #ifdef CONFIG_UART_INTERRUPT_DRIVEN

 /**
  * @brief Fill FIFO with data
  *
  * @param dev UART device struct
  * @param tx_data Data to transmit
  * @param size Number of bytes to send
  *
  * @return Number of bytes sent
  */
 static int uart_sifive_fifo_fill(const struct device *dev,
 				 const uint8_t *tx_data,
 				 int size)
 {
 	volatile struct uart_sifive_regs_t *uart = DEV_UART(dev);
 	int i;

 	for (i = 0; i < size && !(uart->tx & TXDATA_FULL); i++)
 		uart->tx = (int)tx_data[i];

 	return i;
 }

 /**
  * @brief Read data from FIFO
  *
  * @param dev UART device struct
  * @param rxData Data container
  * @param size Container size
  *
  * @return Number of bytes read
  */
 static int uart_sifive_fifo_read(const struct device *dev,
 				 uint8_t *rx_data,
 				 const int size)
 {
 	volatile struct uart_sifive_regs_t *uart = DEV_UART(dev);
 	int i;
 	uint32_t val;

 	for (i = 0; i < size; i++) {
 		val = uart->rx;

 		if (val & RXDATA_EMPTY)
 			break;

 		rx_data[i] = (uint8_t)(val & RXDATA_MASK);
 	}

 	return i;
 }

 /**
  * @brief Enable TX interrupt in ie register
  *
  * @param dev UART device struct
  *
  * @return N/A
  */
 static void uart_sifive_irq_tx_enable(const struct device *dev)
 {
 	volatile struct uart_sifive_regs_t *uart = DEV_UART(dev);

 	uart->ie |= IE_TXWM;
 }

 /**
  * @brief Disable TX interrupt in ie register
  *
  * @param dev UART device struct
  *
  * @return N/A
  */
 static void uart_sifive_irq_tx_disable(const struct device *dev)
 {
 	volatile struct uart_sifive_regs_t *uart = DEV_UART(dev);

 	uart->ie &= ~IE_TXWM;
 }

 /**
  * @brief Check if Tx IRQ has been raised
  *
  * @param dev UART device struct
  *
  * @return 1 if an IRQ is ready, 0 otherwise
  */
 static int uart_sifive_irq_tx_ready(const struct device *dev)
 {
 	volatile struct uart_sifive_regs_t *uart = DEV_UART(dev);

 	return !!(uart->ip & IE_TXWM);
 }

 /**
  * @brief Check if nothing remains to be transmitted
  *
  * @param dev UART device struct
  *
  * @return 1 if nothing remains to be transmitted, 0 otherwise
  */
 static int uart_sifive_irq_tx_complete(const struct device *dev)
 {
 	volatile struct uart_sifive_regs_t *uart = DEV_UART(dev);

 	/*
 	 * No TX EMPTY flag for this controller,
 	 * just check if TX FIFO is not full
 	 */
 	return !(uart->tx & TXDATA_FULL);
 }

 /**
  * @brief Enable RX interrupt in ie register
  *
  * @param dev UART device struct
  *
  * @return N/A
  */
 static void uart_sifive_irq_rx_enable(const struct device *dev)
 {
 	volatile struct uart_sifive_regs_t *uart = DEV_UART(dev);

 	uart->ie |= IE_RXWM;
 }

 /**
  * @brief Disable RX interrupt in ie register
  *
  * @param dev UART device struct
  *
  * @return N/A
  */
 static void uart_sifive_irq_rx_disable(const struct device *dev)
 {
 	volatile struct uart_sifive_regs_t *uart = DEV_UART(dev);

 	uart->ie &= ~IE_RXWM;
 }

 /**
  * @brief Check if Rx IRQ has been raised
  *
  * @param dev UART device struct
  *
  * @return 1 if an IRQ is ready, 0 otherwise
  */
 static int uart_sifive_irq_rx_ready(const struct device *dev)
 {
 	volatile struct uart_sifive_regs_t *uart = DEV_UART(dev);

 	return !!(uart->ip & IE_RXWM);
 }

 /* No error interrupt for this controller */
 static void uart_sifive_irq_err_enable(const struct device *dev)
 {
 	ARG_UNUSED(dev);
 }

 static void uart_sifive_irq_err_disable(const struct device *dev)
 {
 	ARG_UNUSED(dev);
 }

 /**
  * @brief Check if any IRQ is pending
  *
  * @param dev UART device struct
  *
  * @return 1 if an IRQ is pending, 0 otherwise
  */
 static int uart_sifive_irq_is_pending(const struct device *dev)
 {
 	volatile struct uart_sifive_regs_t *uart = DEV_UART(dev);

 	return !!(uart->ip & (IE_RXWM | IE_TXWM));
 }

 static int uart_sifive_irq_update(const struct device *dev)
 {
 	return 1;
 }

 /**
  * @brief Set the callback function pointer for IRQ.
  *
  * @param dev UART device struct
  * @param cb Callback function pointer.
  *
  * @return N/A
  */
 static void uart_sifive_irq_callback_set(const struct device *dev,
 					 uart_irq_callback_user_data_t cb,
 					 void *cb_data)
 {
 	struct uart_sifive_data *data = DEV_DATA(dev);

 	data->callback = cb;
 	data->cb_data = cb_data;
 }

 static void uart_sifive_irq_handler(const struct device *dev)
 {
 	struct uart_sifive_data *data = DEV_DATA(dev);

 	if (data->callback)
 		data->callback(dev, data->cb_data);
 }

 #endif /* CONFIG_UART_INTERRUPT_DRIVEN */


 static int uart_sifive_init(const struct device *dev)
 {
 	const struct uart_sifive_device_config * const cfg = DEV_CFG(dev);
 	volatile struct uart_sifive_regs_t *uart = DEV_UART(dev);

 	/* Enable TX and RX channels */
 	uart->txctrl = TXCTRL_TXEN | CTRL_CNT(cfg->txcnt_irq);
 	uart->rxctrl = RXCTRL_RXEN | CTRL_CNT(cfg->rxcnt_irq);

 	/* Set baud rate */
 	uart->div = cfg->sys_clk_freq / cfg->baud_rate - 1;

 #ifdef CONFIG_UART_INTERRUPT_DRIVEN
 	/* Ensure that uart IRQ is disabled initially */
 	uart->ie = 0U;

 	/* Setup IRQ handler */
 	cfg->cfg_func();
 #endif

 	return 0;
 }

 static const struct uart_driver_api uart_sifive_driver_api = {
 	.poll_in          = uart_sifive_poll_in,
 	.poll_out         = uart_sifive_poll_out,
 	.err_check        = NULL,
 #ifdef CONFIG_UART_INTERRUPT_DRIVEN
 	.fifo_fill        = uart_sifive_fifo_fill,
 	.fifo_read        = uart_sifive_fifo_read,
 	.irq_tx_enable    = uart_sifive_irq_tx_enable,
 	.irq_tx_disable   = uart_sifive_irq_tx_disable,
 	.irq_tx_ready     = uart_sifive_irq_tx_ready,
 	.irq_tx_complete  = uart_sifive_irq_tx_complete,
 	.irq_rx_enable    = uart_sifive_irq_rx_enable,
 	.irq_rx_disable   = uart_sifive_irq_rx_disable,
 	.irq_rx_ready     = uart_sifive_irq_rx_ready,
 	.irq_err_enable   = uart_sifive_irq_err_enable,
 	.irq_err_disable  = uart_sifive_irq_err_disable,
 	.irq_is_pending   = uart_sifive_irq_is_pending,
 	.irq_update       = uart_sifive_irq_update,
 	.irq_callback_set = uart_sifive_irq_callback_set,
 #endif
 };

 #ifdef CONFIG_UART_SIFIVE_PORT_0

 static struct uart_sifive_data uart_sifive_data_0;

 #ifdef CONFIG_UART_INTERRUPT_DRIVEN
 static void uart_sifive_irq_cfg_func_0(void);
 #endif

 static const struct uart_sifive_device_config uart_sifive_dev_cfg_0 = {
 	.port         = DT_INST_REG_ADDR(0),
 	.sys_clk_freq = DT_INST_PROP(0, clock_frequency),
 	.baud_rate    = DT_INST_PROP(0, current_speed),
 	.rxcnt_irq    = CONFIG_UART_SIFIVE_PORT_0_RXCNT_IRQ,
 	.txcnt_irq    = CONFIG_UART_SIFIVE_PORT_0_TXCNT_IRQ,
 #ifdef CONFIG_UART_INTERRUPT_DRIVEN
 	.cfg_func     = uart_sifive_irq_cfg_func_0,
 #endif
 };

 DEVICE_DT_INST_DEFINE(0,
 		    uart_sifive_init,
 		    NULL,
 		    &uart_sifive_data_0, &uart_sifive_dev_cfg_0,
 		    PRE_KERNEL_1, CONFIG_SERIAL_INIT_PRIORITY,
 		    (void *)&uart_sifive_driver_api);

 #ifdef CONFIG_UART_INTERRUPT_DRIVEN
 static void uart_sifive_irq_cfg_func_0(void)
 {
 	IRQ_CONNECT(DT_INST_IRQN(0), DT_INST_IRQ(0, priority),
 		    uart_sifive_irq_handler, DEVICE_DT_INST_GET(0),
 		    0);

 	irq_enable(DT_INST_IRQN(0));
 }
 #endif

 #endif /* CONFIG_UART_SIFIVE_PORT_0 */

 #ifdef CONFIG_UART_SIFIVE_PORT_1

 static struct uart_sifive_data uart_sifive_data_1;

 #ifdef CONFIG_UART_INTERRUPT_DRIVEN
 static void uart_sifive_irq_cfg_func_1(void);
 #endif

 static const struct uart_sifive_device_config uart_sifive_dev_cfg_1 = {
 	.port         = DT_INST_REG_ADDR(1),
 	.sys_clk_freq = DT_INST_PROP(1, clock_frequency),
 	.baud_rate    = DT_INST_PROP(1, current_speed),
 	.rxcnt_irq    = CONFIG_UART_SIFIVE_PORT_1_RXCNT_IRQ,
 	.txcnt_irq    = CONFIG_UART_SIFIVE_PORT_1_TXCNT_IRQ,
 #ifdef CONFIG_UART_INTERRUPT_DRIVEN
 	.cfg_func     = uart_sifive_irq_cfg_func_1,
 #endif
 };

 DEVICE_DT_INST_DEFINE(1,
 		    uart_sifive_init,
 		    NULL,
 		    &uart_sifive_data_1, &uart_sifive_dev_cfg_1,
 		    PRE_KERNEL_1, CONFIG_SERIAL_INIT_PRIORITY,
 		    (void *)&uart_sifive_driver_api);

 #ifdef CONFIG_UART_INTERRUPT_DRIVEN
 static void uart_sifive_irq_cfg_func_1(void)
 {
 	IRQ_CONNECT(DT_INST_IRQN(1), DT_INST_IRQ(1, priority),
 		    uart_sifive_irq_handler, DEVICE_DT_INST_GET(1),
 		    0);

 	irq_enable(DT_INST_IRQN(1));
 }
 #endif

 #endif /* CONFIG_UART_SIFIVE_PORT_1 */
	/*
	* Copyright (c) 2017 Jean-Paul Etienne <fractalclone@gmail.com>
	*
	* SPDX-License-Identifier: Apache-2.0
	*/

	/**
	* @brief UART driver for the SiFive Freedom Processor
	*/

	#define DT_DRV_COMPAT sifive_uart0

	#include <kernel.h>
	#include <arch/cpu.h>
	#include <drivers/uart.h>

	#define RXDATA_EMPTY (1 << 31) /* Receive FIFO Empty */
	#define RXDATA_MASK 0xFF /* Receive Data Mask */

	#define TXDATA_FULL (1 << 31) /* Transmit FIFO Full */

	#define TXCTRL_TXEN (1 << 0) /* Activate Tx Channel */

	#define RXCTRL_RXEN (1 << 0) /* Activate Rx Channel */

	#define IE_TXWM (1 << 0) /* TX Interrupt Enable/Pending */
	#define IE_RXWM (1 << 1) /* RX Interrupt Enable/Pending */

	/*
	* RX/TX Threshold count to generate TX/RX Interrupts.
	* Used by txctrl and rxctrl registers
	*/
	#define CTRL_CNT(x) (((x) & 0x07) << 16)

	struct uart_sifive_regs_t {
	uint32_t tx;
	uint32_t rx;
	uint32_t txctrl;
	uint32_t rxctrl;
	uint32_t ie;
	uint32_t ip;
	uint32_t div;
	};

	#ifdef CONFIG_UART_INTERRUPT_DRIVEN
	typedef void (*irq_cfg_func_t)(void);
	#endif

	struct uart_sifive_device_config {
	uintptr_t port;
	uint32_t sys_clk_freq;
	uint32_t baud_rate;
	uint32_t rxcnt_irq;
	uint32_t txcnt_irq;
	#ifdef CONFIG_UART_INTERRUPT_DRIVEN
	irq_cfg_func_t cfg_func;
	#endif
	};

	struct uart_sifive_data {
	#ifdef CONFIG_UART_INTERRUPT_DRIVEN
	uart_irq_callback_user_data_t callback;
	void *cb_data;
	#endif
	};

	#define DEV_CFG(dev) \
	((const struct uart_sifive_device_config * const) \
	(dev)->config)
	#define DEV_UART(dev) \
	((struct uart_sifive_regs_t *)(DEV_CFG(dev))->port)
	#define DEV_DATA(dev) \
	((struct uart_sifive_data * const)(dev)->data)

	/**
	* @brief Output a character in polled mode.
	*
	* Writes data to tx register if transmitter is not full.
	*
	* @param dev UART device struct
	* @param c Character to send
	*/
	static void uart_sifive_poll_out(const struct device *dev,
	unsigned char c)
	{
	volatile struct uart_sifive_regs_t *uart = DEV_UART(dev);

	/* Wait while TX FIFO is full */
	while (uart->tx & TXDATA_FULL) {
	}

	uart->tx = (int)c;
	}

	/**
	* @brief Poll the device for input.
	*
	* @param dev UART device struct
	* @param c Pointer to character
	*
	* @return 0 if a character arrived, -1 if the input buffer if empty.
	*/
	static int uart_sifive_poll_in(const struct device dev, unsigned char c)
	{
	volatile struct uart_sifive_regs_t *uart = DEV_UART(dev);
	uint32_t val = uart->rx;

	if (val & RXDATA_EMPTY) {
	return -1;
	}

	*c = (unsigned char)(val & RXDATA_MASK);

	return 0;
	}

	#ifdef CONFIG_UART_INTERRUPT_DRIVEN

	/**
	* @brief Fill FIFO with data
	*
	* @param dev UART device struct
	* @param tx_data Data to transmit
	* @param size Number of bytes to send
	*
	* @return Number of bytes sent
	*/
	static int uart_sifive_fifo_fill(const struct device *dev,
	const uint8_t *tx_data,
	int size)
	{
	volatile struct uart_sifive_regs_t *uart = DEV_UART(dev);
	int i;

	for (i = 0; i < size && !(uart->tx & TXDATA_FULL); i++)
	uart->tx = (int)tx_data[i];

	return i;
	}

	/**
	* @brief Read data from FIFO
	*
	* @param dev UART device struct
	* @param rxData Data container
	* @param size Container size
	*
	* @return Number of bytes read
	*/
	static int uart_sifive_fifo_read(const struct device *dev,
	uint8_t *rx_data,
	const int size)
	{
	volatile struct uart_sifive_regs_t *uart = DEV_UART(dev);
	int i;
	uint32_t val;

	for (i = 0; i < size; i++) {
	val = uart->rx;

	if (val & RXDATA_EMPTY)
	break;

	rx_data[i] = (uint8_t)(val & RXDATA_MASK);
	}

	return i;
	}

	/**
	* @brief Enable TX interrupt in ie register
	*
	* @param dev UART device struct
	*
	* @return N/A
	*/
	static void uart_sifive_irq_tx_enable(const struct device *dev)
	{
	volatile struct uart_sifive_regs_t *uart = DEV_UART(dev);

	uart->ie \|= IE_TXWM;
	}

	/**
	* @brief Disable TX interrupt in ie register
	*
	* @param dev UART device struct
	*
	* @return N/A
	*/
	static void uart_sifive_irq_tx_disable(const struct device *dev)
	{
	volatile struct uart_sifive_regs_t *uart = DEV_UART(dev);

	uart->ie &= ~IE_TXWM;
	}

	/**
	* @brief Check if Tx IRQ has been raised
	*
	* @param dev UART device struct
	*
	* @return 1 if an IRQ is ready, 0 otherwise
	*/
	static int uart_sifive_irq_tx_ready(const struct device *dev)
	{
	volatile struct uart_sifive_regs_t *uart = DEV_UART(dev);

	return !!(uart->ip & IE_TXWM);
	}

	/**
	* @brief Check if nothing remains to be transmitted
	*
	* @param dev UART device struct
	*
	* @return 1 if nothing remains to be transmitted, 0 otherwise
	*/
	static int uart_sifive_irq_tx_complete(const struct device *dev)
	{
	volatile struct uart_sifive_regs_t *uart = DEV_UART(dev);

	/*
	* No TX EMPTY flag for this controller,
	* just check if TX FIFO is not full
	*/
	return !(uart->tx & TXDATA_FULL);
	}

	/**
	* @brief Enable RX interrupt in ie register
	*
	* @param dev UART device struct
	*
	* @return N/A
	*/
	static void uart_sifive_irq_rx_enable(const struct device *dev)
	{
	volatile struct uart_sifive_regs_t *uart = DEV_UART(dev);

	uart->ie \|= IE_RXWM;
	}

	/**
	* @brief Disable RX interrupt in ie register
	*
	* @param dev UART device struct
	*
	* @return N/A
	*/
	static void uart_sifive_irq_rx_disable(const struct device *dev)
	{
	volatile struct uart_sifive_regs_t *uart = DEV_UART(dev);

	uart->ie &= ~IE_RXWM;
	}

	/**
	* @brief Check if Rx IRQ has been raised
	*
	* @param dev UART device struct
	*
	* @return 1 if an IRQ is ready, 0 otherwise
	*/
	static int uart_sifive_irq_rx_ready(const struct device *dev)
	{
	volatile struct uart_sifive_regs_t *uart = DEV_UART(dev);

	return !!(uart->ip & IE_RXWM);
	}

	/* No error interrupt for this controller */
	static void uart_sifive_irq_err_enable(const struct device *dev)
	{
	ARG_UNUSED(dev);
	}

	static void uart_sifive_irq_err_disable(const struct device *dev)
	{
	ARG_UNUSED(dev);
	}

	/**
	* @brief Check if any IRQ is pending
	*
	* @param dev UART device struct
	*
	* @return 1 if an IRQ is pending, 0 otherwise
	*/
	static int uart_sifive_irq_is_pending(const struct device *dev)
	{
	volatile struct uart_sifive_regs_t *uart = DEV_UART(dev);

	return !!(uart->ip & (IE_RXWM \| IE_TXWM));
	}

	static int uart_sifive_irq_update(const struct device *dev)
	{
	return 1;
	}

	/**
	* @brief Set the callback function pointer for IRQ.
	*
	* @param dev UART device struct
	* @param cb Callback function pointer.
	*
	* @return N/A
	*/
	static void uart_sifive_irq_callback_set(const struct device *dev,
	uart_irq_callback_user_data_t cb,
	void *cb_data)
	{
	struct uart_sifive_data *data = DEV_DATA(dev);

	data->callback = cb;
	data->cb_data = cb_data;
	}

	static void uart_sifive_irq_handler(const struct device *dev)
	{
	struct uart_sifive_data *data = DEV_DATA(dev);

	if (data->callback)
	data->callback(dev, data->cb_data);
	}

	#endif /* CONFIG_UART_INTERRUPT_DRIVEN */


	static int uart_sifive_init(const struct device *dev)
	{
	const struct uart_sifive_device_config * const cfg = DEV_CFG(dev);
	volatile struct uart_sifive_regs_t *uart = DEV_UART(dev);

	/* Enable TX and RX channels */
	uart->txctrl = TXCTRL_TXEN \| CTRL_CNT(cfg->txcnt_irq);
	uart->rxctrl = RXCTRL_RXEN \| CTRL_CNT(cfg->rxcnt_irq);

	/* Set baud rate */
	uart->div = cfg->sys_clk_freq / cfg->baud_rate - 1;

	#ifdef CONFIG_UART_INTERRUPT_DRIVEN
	/* Ensure that uart IRQ is disabled initially */
	uart->ie = 0U;

	/* Setup IRQ handler */
	cfg->cfg_func();
	#endif

	return 0;
	}

	static const struct uart_driver_api uart_sifive_driver_api = {
	.poll_in = uart_sifive_poll_in,
	.poll_out = uart_sifive_poll_out,
	.err_check = NULL,
	#ifdef CONFIG_UART_INTERRUPT_DRIVEN
	.fifo_fill = uart_sifive_fifo_fill,
	.fifo_read = uart_sifive_fifo_read,
	.irq_tx_enable = uart_sifive_irq_tx_enable,
	.irq_tx_disable = uart_sifive_irq_tx_disable,
	.irq_tx_ready = uart_sifive_irq_tx_ready,
	.irq_tx_complete = uart_sifive_irq_tx_complete,
	.irq_rx_enable = uart_sifive_irq_rx_enable,
	.irq_rx_disable = uart_sifive_irq_rx_disable,
	.irq_rx_ready = uart_sifive_irq_rx_ready,
	.irq_err_enable = uart_sifive_irq_err_enable,
	.irq_err_disable = uart_sifive_irq_err_disable,
	.irq_is_pending = uart_sifive_irq_is_pending,
	.irq_update = uart_sifive_irq_update,
	.irq_callback_set = uart_sifive_irq_callback_set,
	#endif
	};

	#ifdef CONFIG_UART_SIFIVE_PORT_0

	static struct uart_sifive_data uart_sifive_data_0;

	#ifdef CONFIG_UART_INTERRUPT_DRIVEN
	static void uart_sifive_irq_cfg_func_0(void);
	#endif

	static const struct uart_sifive_device_config uart_sifive_dev_cfg_0 = {
	.port = DT_INST_REG_ADDR(0),
	.sys_clk_freq = DT_INST_PROP(0, clock_frequency),
	.baud_rate = DT_INST_PROP(0, current_speed),
	.rxcnt_irq = CONFIG_UART_SIFIVE_PORT_0_RXCNT_IRQ,
	.txcnt_irq = CONFIG_UART_SIFIVE_PORT_0_TXCNT_IRQ,
	#ifdef CONFIG_UART_INTERRUPT_DRIVEN
	.cfg_func = uart_sifive_irq_cfg_func_0,
	#endif
	};

	DEVICE_DT_INST_DEFINE(0,
	uart_sifive_init,
	NULL,
	&uart_sifive_data_0, &uart_sifive_dev_cfg_0,
	PRE_KERNEL_1, CONFIG_SERIAL_INIT_PRIORITY,
	(void *)&uart_sifive_driver_api);

	#ifdef CONFIG_UART_INTERRUPT_DRIVEN
	static void uart_sifive_irq_cfg_func_0(void)
	{
	IRQ_CONNECT(DT_INST_IRQN(0), DT_INST_IRQ(0, priority),
	uart_sifive_irq_handler, DEVICE_DT_INST_GET(0),
	0);

	irq_enable(DT_INST_IRQN(0));
	}
	#endif

	#endif /* CONFIG_UART_SIFIVE_PORT_0 */

	#ifdef CONFIG_UART_SIFIVE_PORT_1

	static struct uart_sifive_data uart_sifive_data_1;

	#ifdef CONFIG_UART_INTERRUPT_DRIVEN
	static void uart_sifive_irq_cfg_func_1(void);
	#endif

	static const struct uart_sifive_device_config uart_sifive_dev_cfg_1 = {
	.port = DT_INST_REG_ADDR(1),
	.sys_clk_freq = DT_INST_PROP(1, clock_frequency),
	.baud_rate = DT_INST_PROP(1, current_speed),
	.rxcnt_irq = CONFIG_UART_SIFIVE_PORT_1_RXCNT_IRQ,
	.txcnt_irq = CONFIG_UART_SIFIVE_PORT_1_TXCNT_IRQ,
	#ifdef CONFIG_UART_INTERRUPT_DRIVEN
	.cfg_func = uart_sifive_irq_cfg_func_1,
	#endif
	};

	DEVICE_DT_INST_DEFINE(1,
	uart_sifive_init,
	NULL,
	&uart_sifive_data_1, &uart_sifive_dev_cfg_1,
	PRE_KERNEL_1, CONFIG_SERIAL_INIT_PRIORITY,
	(void *)&uart_sifive_driver_api);

	#ifdef CONFIG_UART_INTERRUPT_DRIVEN
	static void uart_sifive_irq_cfg_func_1(void)
	{
	IRQ_CONNECT(DT_INST_IRQN(1), DT_INST_IRQ(1, priority),
	uart_sifive_irq_handler, DEVICE_DT_INST_GET(1),
	0);

	irq_enable(DT_INST_IRQN(1));
	}
	#endif

	#endif /* CONFIG_UART_SIFIVE_PORT_1 */