doc/guides/bluetooth/bluetooth-tools.rst - third_party/github/zephyrproject-rtos/zephyr - Git at Google

 .. _bluetooth-tools:

 Bluetooth tools
 ###############

 This page lists and describes tools that can be used to assist during Bluetooth
 stack or application development in order to help, simplify and speed up the
 development process.

 .. _bluetooth-mobile-apps:

 Mobile applications
 *******************

 It is often useful to make use of existing mobile applications to interact with
 hardware running Zephyr, to test functionality without having to write any
 additional code or requiring extra hardware.

 The recommended mobile applications for interacting with Zephyr are:

 * Android:

   * `nRF Connect for Android`_
   * `nRF Mesh for Android`_
   * `LightBlue for Android`_

 * iOS:

   * `nRF Connect for iOS`_
   * `nRF Mesh for iOS`_
   * `LightBlue for iOS`_

 .. _bluetooth_bluez:

 Using BlueZ with Zephyr
 ***********************

 The Linux Bluetooth Protocol Stack, BlueZ, comes with a very useful set of
 tools that can be used to debug and interact with Zephyr's BLE Host and
 Controller. In order to benefit from these tools you will need to make sure
 that you are running a recent version of the Linux Kernel and BlueZ:

 * Linux Kernel 4.10+
 * BlueZ 4.45+

 Additionally, some of the BlueZ tools might not be bundled by default by your
 Linux distribution. If you need to build BlueZ from scratch to update to a
 recent version or to obtain all of its tools you can follow the steps below:

 .. code-block:: console

    git clone git://git.kernel.org/pub/scm/bluetooth/bluez.git
    cd bluez
    ./bootstrap-configure --disable-android --disable-midi
    make

 You can then find :file:`btattach`, :file:`btmgt` and :file:`btproxy` in the
 :file:`tools/` folder and :file:`btmon` in the :file:`monitor/` folder.

 You'll need to enable BlueZ's experimental features so you can access its
 most recent BLE functionality. Do this by editing the file
 :file:`/lib/systemd/system/bluetooth.service`
 and making sure to include the :literal:`-E` option in the daemon's execution
 start line:

 .. code-block:: console

    ExecStart=/usr/libexec/bluetooth/bluetoothd -E

 Finally, reload and restart the daemon:

 .. code-block:: console

    sudo systemctl daemon-reload
    sudo systemctl restart bluetooth

 .. _bluetooth_qemu_posix:

 Running on QEMU and Native POSIX
 ********************************

 It's possible to run Bluetooth applications using either the :ref:`QEMU
 emulator<application_run_qemu>` or :ref:`Native POSIX <native_posix>`.
 In either case, a Bluetooth controller needs to be exported from
 the host OS (Linux) to the emulator. For this purpose you will need some tools
 described in the :ref:`bluetooth_bluez` section.

 Using the Host System Bluetooth Controller
 ==========================================

 The host OS's Bluetooth controller is connected in the following manner:

 * To the second QEMU serial line using a UNIX socket. This socket gets used
   with the help of the QEMU option :literal:`-serial unix:/tmp/bt-server-bredr`.
   This option gets passed to QEMU through :makevar:`QEMU_EXTRA_FLAGS`
   automatically whenever an application has enabled Bluetooth support.
 * To a serial port in Native POSIX through the use of a command-line option
   passed to the Native POSIX executable: ``--bt-dev=hci0``

 On the host side, BlueZ allows you to export its Bluetooth controller
 through a so-called user channel for QEMU and Native POSIX to use.

 .. note::
    You only need to run ``btproxy`` when using QEMU. Native POSIX handles
    the UNIX socket proxying automatically

 If you are using QEMU, in order to make the Controller available you will need
 one additional step using ``btproxy``:

 #. Make sure that the Bluetooth controller is down

 #. Use the btproxy tool to open the listening UNIX socket, type:

    .. code-block:: console

       sudo tools/btproxy -u -i 0
       Listening on /tmp/bt-server-bredr

    You might need to replace :literal:`-i 0` with the index of the Controller
    you wish to proxy.

 Once the hardware is connected and ready to use, you can then proceed to
 building and running a sample:

 * Choose one of the Bluetooth sample applications located in
   :literal:`samples/bluetooth`.

 * To run a Bluetooth application in QEMU, type:

   .. zephyr-app-commands::
      :zephyr-app: samples/bluetooth/<sample>
      :host-os: unix
      :board: qemu_x86
      :goals: run
      :compact:

   Running QEMU now results in a connection with the second serial line to
   the :literal:`bt-server-bredr` UNIX socket, letting the application
   access the Bluetooth controller.

 * To run a Bluetooth application in Native POSIX, first build it:

   .. zephyr-app-commands::
      :zephyr-app: samples/bluetooth/<sample>
      :host-os: unix
      :board: native_posix
      :goals: build
      :compact:

   And then run it with::

      $ sudo ./build/zephyr/zephyr.exe --bt-dev=hci0

 Using a Zephyr-based BLE Controller
 ===================================

 Depending on which hardware you have available, you can choose between two
 transports when building a single-mode, Zephyr-based BLE Controller:

 * UART: Use the :ref:`hci_uart <bluetooth-hci-uart-sample>` sample and follow
   the instructions in :ref:`bluetooth-hci-uart-qemu-posix`.
 * USB: Use the :ref:`hci_usb <bluetooth-hci-usb-sample>` sample and then
   treat it as a Host System Bluetooth Controller (see previous section)

 HCI Tracing
 ===========

 When running the Host on a computer connected to an external Controller, it
 is very useful to be able to see the full log of exchanges between the two,
 in the format of a :ref:`bluetooth-hci` log.
 In order to see those logs, you can use the built-in ``btmon`` tool from BlueZ:

 .. code-block:: console

    $ btmon

 .. _bluetooth_ctlr_bluez:

 Using Zephyr-based Controllers with BlueZ
 *****************************************

 If you want to test a Zephyr-powered BLE Controller using BlueZ's Bluetooth
 Host, you will need a few tools described in the :ref:`bluetooth_bluez` section.
 Once you have installed the tools you can then use them to interact with your
 Zephyr-based controller:

    .. code-block:: console

       sudo tools/btmgmt --index 0
       [hci0]# auto-power
       [hci0]# find -l

 You might need to replace :literal:`--index 0` with the index of the Controller
 you wish to manage.
 Additional information about :file:`btmgmt` can be found in its manual pages.


 .. _nRF Connect for Android: https://play.google.com/store/apps/details?id=no.nordicsemi.android.mcp&hl=en
 .. _nRF Connect for iOS: https://itunes.apple.com/us/app/nrf-connect/id1054362403
 .. _LightBlue for Android: https://play.google.com/store/apps/details?id=com.punchthrough.lightblueexplorer&hl=en_US
 .. _LightBlue for iOS: https://itunes.apple.com/us/app/lightblue-explorer/id557428110
 .. _nRF Mesh for Android: https://play.google.com/store/apps/details?id=no.nordicsemi.android.nrfmeshprovisioner&hl=en
 .. _nRF Mesh for iOS: https://itunes.apple.com/us/app/nrf-mesh/id1380726771
	.. _bluetooth-tools:

	Bluetooth tools
	###############

	This page lists and describes tools that can be used to assist during Bluetooth
	stack or application development in order to help, simplify and speed up the
	development process.

	.. _bluetooth-mobile-apps:

	Mobile applications
	*******************

	It is often useful to make use of existing mobile applications to interact with
	hardware running Zephyr, to test functionality without having to write any
	additional code or requiring extra hardware.

	The recommended mobile applications for interacting with Zephyr are:

	* Android:

	* `nRF Connect for Android`_
	* `nRF Mesh for Android`_
	* `LightBlue for Android`_

	* iOS:

	* `nRF Connect for iOS`_
	* `nRF Mesh for iOS`_
	* `LightBlue for iOS`_

	.. _bluetooth_bluez:

	Using BlueZ with Zephyr
	***********************

	The Linux Bluetooth Protocol Stack, BlueZ, comes with a very useful set of
	tools that can be used to debug and interact with Zephyr's BLE Host and
	Controller. In order to benefit from these tools you will need to make sure
	that you are running a recent version of the Linux Kernel and BlueZ:

	* Linux Kernel 4.10+
	* BlueZ 4.45+

	Additionally, some of the BlueZ tools might not be bundled by default by your
	Linux distribution. If you need to build BlueZ from scratch to update to a
	recent version or to obtain all of its tools you can follow the steps below:

	.. code-block:: console

	git clone git://git.kernel.org/pub/scm/bluetooth/bluez.git
	cd bluez
	./bootstrap-configure --disable-android --disable-midi
	make

	You can then find :file:`btattach`, :file:`btmgt` and :file:`btproxy` in the
	:file:`tools/` folder and :file:`btmon` in the :file:`monitor/` folder.

	You'll need to enable BlueZ's experimental features so you can access its
	most recent BLE functionality. Do this by editing the file
	:file:`/lib/systemd/system/bluetooth.service`
	and making sure to include the :literal:`-E` option in the daemon's execution
	start line:

	.. code-block:: console

	ExecStart=/usr/libexec/bluetooth/bluetoothd -E

	Finally, reload and restart the daemon:

	.. code-block:: console

	sudo systemctl daemon-reload
	sudo systemctl restart bluetooth

	.. _bluetooth_qemu_posix:

	Running on QEMU and Native POSIX
	********************************

	It's possible to run Bluetooth applications using either the :ref:`QEMU
	emulator<application_run_qemu>` or :ref:`Native POSIX <native_posix>`.
	In either case, a Bluetooth controller needs to be exported from
	the host OS (Linux) to the emulator. For this purpose you will need some tools
	described in the :ref:`bluetooth_bluez` section.

	Using the Host System Bluetooth Controller
	==========================================

	The host OS's Bluetooth controller is connected in the following manner:

	* To the second QEMU serial line using a UNIX socket. This socket gets used
	with the help of the QEMU option :literal:`-serial unix:/tmp/bt-server-bredr`.
	This option gets passed to QEMU through :makevar:`QEMU_EXTRA_FLAGS`
	automatically whenever an application has enabled Bluetooth support.
	* To a serial port in Native POSIX through the use of a command-line option
	passed to the Native POSIX executable: ``--bt-dev=hci0``

	On the host side, BlueZ allows you to export its Bluetooth controller
	through a so-called user channel for QEMU and Native POSIX to use.

	.. note::
	You only need to run ``btproxy`` when using QEMU. Native POSIX handles
	the UNIX socket proxying automatically

	If you are using QEMU, in order to make the Controller available you will need
	one additional step using ``btproxy``:

	#. Make sure that the Bluetooth controller is down

	#. Use the btproxy tool to open the listening UNIX socket, type:

	.. code-block:: console

	sudo tools/btproxy -u -i 0
	Listening on /tmp/bt-server-bredr

	You might need to replace :literal:`-i 0` with the index of the Controller
	you wish to proxy.

	Once the hardware is connected and ready to use, you can then proceed to
	building and running a sample:

	* Choose one of the Bluetooth sample applications located in
	:literal:`samples/bluetooth`.

	* To run a Bluetooth application in QEMU, type:

	.. zephyr-app-commands::
	:zephyr-app: samples/bluetooth/<sample>
	:host-os: unix
	:board: qemu_x86
	:goals: run
	:compact:

	Running QEMU now results in a connection with the second serial line to
	the :literal:`bt-server-bredr` UNIX socket, letting the application
	access the Bluetooth controller.

	* To run a Bluetooth application in Native POSIX, first build it:

	.. zephyr-app-commands::
	:zephyr-app: samples/bluetooth/<sample>
	:host-os: unix
	:board: native_posix
	:goals: build
	:compact:

	And then run it with::

	$ sudo ./build/zephyr/zephyr.exe --bt-dev=hci0

	Using a Zephyr-based BLE Controller
	===================================

	Depending on which hardware you have available, you can choose between two
	transports when building a single-mode, Zephyr-based BLE Controller:

	* UART: Use the :ref:`hci_uart <bluetooth-hci-uart-sample>` sample and follow
	the instructions in :ref:`bluetooth-hci-uart-qemu-posix`.
	* USB: Use the :ref:`hci_usb <bluetooth-hci-usb-sample>` sample and then
	treat it as a Host System Bluetooth Controller (see previous section)

	HCI Tracing
	===========

	When running the Host on a computer connected to an external Controller, it
	is very useful to be able to see the full log of exchanges between the two,
	in the format of a :ref:`bluetooth-hci` log.
	In order to see those logs, you can use the built-in ``btmon`` tool from BlueZ:

	.. code-block:: console

	$ btmon

	.. _bluetooth_ctlr_bluez:

	Using Zephyr-based Controllers with BlueZ
	*****************************************

	If you want to test a Zephyr-powered BLE Controller using BlueZ's Bluetooth
	Host, you will need a few tools described in the :ref:`bluetooth_bluez` section.
	Once you have installed the tools you can then use them to interact with your
	Zephyr-based controller:

	.. code-block:: console

	sudo tools/btmgmt --index 0
	[hci0]# auto-power
	[hci0]# find -l

	You might need to replace :literal:`--index 0` with the index of the Controller
	you wish to manage.
	Additional information about :file:`btmgmt` can be found in its manual pages.


	.. _nRF Connect for Android: https://play.google.com/store/apps/details?id=no.nordicsemi.android.mcp&hl=en
	.. _nRF Connect for iOS: https://itunes.apple.com/us/app/nrf-connect/id1054362403
	.. _LightBlue for Android: https://play.google.com/store/apps/details?id=com.punchthrough.lightblueexplorer&hl=en_US
	.. _LightBlue for iOS: https://itunes.apple.com/us/app/lightblue-explorer/id557428110
	.. _nRF Mesh for Android: https://play.google.com/store/apps/details?id=no.nordicsemi.android.nrfmeshprovisioner&hl=en
	.. _nRF Mesh for iOS: https://itunes.apple.com/us/app/nrf-mesh/id1380726771