| # Kconfig.cmsdk_ahb - ARM CMSDK (Cortex-M System Design Kit) AHB GPIO cfg |
| # |
| # |
| # Copyright (c) 2016 Linaro Limited |
| # |
| # SPDX-License-Identifier: Apache-2.0 |
| # |
| |
| menuconfig GPIO_CMSDK_AHB |
| bool "ARM CMSDK (Cortex-M System Design Kit) AHB GPIO Controllers" |
| depends on SOC_SERIES_BEETLE |
| help |
| Enable config options to support the ARM CMSDK GPIO controllers. |
| |
| Says n if not sure. |
| |
| if GPIO_CMSDK_AHB |
| |
| # ---------- Port 0 ---------- |
| |
| config GPIO_CMSDK_AHB_PORT0 |
| bool "Enable driver for GPIO Port 0" |
| help |
| Build the driver to utilize GPIO controller Port 0. |
| |
| config GPIO_CMSDK_AHB_PORT0_DEV_NAME |
| string "Device name for Port 0" |
| depends on GPIO_CMSDK_AHB_PORT0 |
| default "GPIO_0" |
| help |
| Device name for Port 0. |
| |
| config GPIO_CMSDK_AHB_PORT0_IRQ_PRI |
| int "Interrupt Priority for Port 0" |
| depends on GPIO_CMSDK_AHB_PORT0 |
| default 3 |
| help |
| Interrupt priority for Port 0. |
| |
| # ---------- Port 1 ---------- |
| |
| config GPIO_CMSDK_AHB_PORT1 |
| bool "Enable driver for GPIO Port 1" |
| help |
| Build the driver to utilize GPIO controller Port 1. |
| |
| config GPIO_CMSDK_AHB_PORT1_DEV_NAME |
| string "Device name for Port 1" |
| depends on GPIO_CMSDK_AHB_PORT1 |
| default "GPIO_1" |
| help |
| Device name for Port 1. |
| |
| config GPIO_CMSDK_AHB_PORT1_IRQ_PRI |
| int "Interrupt Priority for Port 1" |
| depends on GPIO_CMSDK_AHB_PORT1 |
| default 3 |
| help |
| Interrupt priority for Port 1. |
| |
| # ---------- Port 2 ---------- |
| |
| config GPIO_CMSDK_AHB_PORT2 |
| bool "Enable driver for GPIO Port 2" |
| help |
| Build the driver to utilize GPIO controller Port 2. |
| |
| config GPIO_CMSDK_AHB_PORT2_DEV_NAME |
| string "Device name for Port 2" |
| depends on GPIO_CMSDK_AHB_PORT2 |
| default "GPIO_2" |
| help |
| Device name for Port 2. |
| |
| config GPIO_CMSDK_AHB_PORT2_IRQ_PRI |
| int "Interrupt Priority for Port 2" |
| depends on GPIO_CMSDK_AHB_PORT2 |
| default 3 |
| help |
| Interrupt priority for Port 2. |
| |
| # ---------- Port 3 ---------- |
| |
| config GPIO_CMSDK_AHB_PORT3 |
| bool "Enable driver for GPIO Port 3" |
| help |
| Build the driver to utilize GPIO controller Port 3. |
| |
| config GPIO_CMSDK_AHB_PORT3_DEV_NAME |
| string "Device name for Port 3" |
| depends on GPIO_CMSDK_AHB_PORT3 |
| default "GPIO_3" |
| help |
| Device name for Port 3. |
| |
| config GPIO_CMSDK_AHB_PORT3_IRQ_PRI |
| int "Interrupt Priority for Port 3" |
| depends on GPIO_CMSDK_AHB_PORT3 |
| default 3 |
| help |
| Interrupt priority for Port 3. |
| |
| endif # GPIO_CMSDK_AHB |
