| # LPC LPC55XXX Series |
| |
| # Copyright (c) 2019, NXP |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| choice |
| prompt "LPC5500 Series MCU Selection" |
| depends on SOC_SERIES_LPC55XXX |
| |
| config SOC_LPC55S16 |
| bool "SOC_LPC55S16 M33" |
| select CPU_CORTEX_M33 |
| select CPU_HAS_ARM_SAU |
| select CPU_HAS_ARM_MPU |
| select CPU_HAS_FPU |
| select ARMV8_M_DSP |
| select ARM_TRUSTZONE_M |
| select CLOCK_CONTROL |
| select HAS_MCUX_IAP if !TRUSTED_EXECUTION_NONSECURE |
| select HAS_MCUX_MCAN |
| |
| config SOC_LPC55S28 |
| bool "SOC_LPC55S28 M33" |
| select CPU_CORTEX_M33 |
| select CPU_HAS_ARM_MPU |
| select CPU_HAS_FPU |
| select ARMV8_M_DSP |
| select CLOCK_CONTROL |
| select HAS_MCUX_IAP |
| select HAS_MCUX_LPADC |
| select HAS_MCUX_LPC_DMA |
| |
| config SOC_LPC55S69_CPU0 |
| bool "SOC_LPC55S69 M33 [CPU 0]" |
| select CPU_CORTEX_M33 |
| select CPU_HAS_ARM_SAU |
| select CPU_HAS_ARM_MPU |
| select CPU_HAS_FPU |
| select ARMV8_M_DSP |
| select ARM_TRUSTZONE_M |
| select CLOCK_CONTROL |
| select HAS_MCUX_IAP |
| select HAS_MCUX_LPADC |
| select HAS_MCUX_LPC_DMA |
| select HAS_MCUX_USB_LPCIP3511 |
| select USB_DEDICATED_MEMORY if USB_DEVICE_DRIVER |
| select HAS_MCUX_CTIMER |
| select HAS_MCUX_SCTIMER |
| |
| config SOC_LPC55S69_CPU1 |
| bool "SOC_LPC55S69 M33 [CPU 1]" |
| select CPU_CORTEX_M33 |
| |
| endchoice |
| |
| if SOC_SERIES_LPC55XXX |
| |
| config SOC_PART_NUMBER_LPC55S16JBD100 |
| bool |
| |
| config SOC_PART_NUMBER_LPC55S28JBD100 |
| bool |
| |
| config SOC_PART_NUMBER_LPC55S69JBD100 |
| bool |
| |
| config SOC_PART_NUMBER_LPC55S69JET98 |
| bool |
| |
| config SOC_PART_NUMBER_LPC55XXX |
| string |
| default "LPC55S16JBD100" if SOC_PART_NUMBER_LPC55S16JBD100 |
| default "LPC55S28JBD100" if SOC_PART_NUMBER_LPC55S28JBD100 |
| default "LPC55S69JBD100" if SOC_PART_NUMBER_LPC55S69JBD100 |
| default "LPC55S69JET98" if SOC_PART_NUMBER_LPC55S69JET98 |
| |
| help |
| This string holds the full part number of the SoC. It is a hidden |
| option that you should not set directly. The part number selection |
| choice defines the default value for this string. |
| |
| config INIT_PLL0 |
| bool "Initialize PLL0" |
| |
| config SECOND_CORE_MCUX |
| bool "LPC55xxx's second core" |
| depends on HAS_MCUX |
| help |
| Driver for second core startup |
| |
| config SECOND_IMAGE_MCUX |
| depends on SECOND_CORE_MCUX |
| string "Binary image of second core's code" |
| help |
| This points to the image file for the the binary code that will be |
| used by the second core. |
| |
| config USB_DEDICATED_MEMORY |
| bool "Dedicated memory for USB transfer buffer and controller operation buffers" |
| |
| # Workaround for not being able to have commas in macro arguments |
| DT_CHOSEN_Z_CODE_CPU1_PARTITION := zephyr,code-cpu1-partition |
| |
| config SECOND_CORE_BOOT_ADDRESS_MCUX |
| depends on SECOND_CORE_MCUX |
| hex "Address the second core will boot at" |
| default $(dt_chosen_reg_addr_hex,$(DT_CHOSEN_Z_CODE_CPU1_PARTITION)) |
| help |
| This is the address the second core will boot from. |
| |
| endif # SOC_SERIES_LPC55XXX |
