| # Raspberry Pi RP2XXX MCU line |
| |
| # Copyright (c) 2021 Nordic Semiconductor ASA |
| # Copyright (c) 2021 Yonatan Schachter |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| choice |
| prompt "RP2xxx MCU Selection" |
| depends on SOC_SERIES_RP2XXX |
| |
| config SOC_RP2040 |
| bool "Raspberry Pi RP2040" |
| |
| endchoice |
| |
| config RP2_REQUIRES_SECOND_STAGE_BOOT |
| bool |
| default y if FLASH_LOAD_OFFSET = 0x100 |
| |
| # Flash type used by the SoC. The board should select the one used. |
| |
| config RP2_FLASH_W25Q080 |
| bool |
| help |
| Configure RP2 to use a W25Q080 flash chip, or similar. Should be selected |
| by the board definition, not the user. |
| |
| config RP2_FLASH_GENERIC_03H |
| bool |
| help |
| Configure RP2 to use a flash chip supporting the standard 03h command. |
| Should be selected by the board definition, not the user. |
| |
| config RP2_FLASH_IS25LP080 |
| bool |
| help |
| Configure RP2 to use a IS25LP080 flash chip, or similar. Should be selected |
| by the board definition, not the user. |
| |
| config RP2_FLASH_W25X10CL |
| bool |
| help |
| Configure RP2 to use a W25X10CL flash chip, or similar. Should be selected |
| by the board definition, not the user. |
| |
| config RP2_FLASH_AT25SF128A |
| bool |
| help |
| Configure RP2 to use a AT25SF128A flash chip, or similar. Should be selected |
| by the board definition, not the user. |
