| /* |
| * Copyright (c) 2022 Henrik Brix Andersen <henrik@brixandersen.dk> |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <zephyr/drivers/can/can_sja1000.h> |
| #include "can_sja1000_priv.h" |
| |
| #include <zephyr/drivers/can.h> |
| #include <zephyr/drivers/can/transceiver.h> |
| #include <zephyr/logging/log.h> |
| |
| LOG_MODULE_REGISTER(can_sja1000, CONFIG_CAN_LOG_LEVEL); |
| |
| /* Timeout for entering/leaving reset mode */ |
| #define CAN_SJA1000_RESET_MODE_TIMEOUT_USEC 1000 |
| #define CAN_SJA1000_RESET_MODE_RETRIES 100 |
| #define CAN_SJA1000_RESET_MODE_DELAY \ |
| K_USEC(CAN_SJA1000_RESET_MODE_TIMEOUT_USEC / CAN_SJA1000_RESET_MODE_RETRIES) |
| |
| static inline void can_sja1000_write_reg(const struct device *dev, uint8_t reg, uint8_t val) |
| { |
| const struct can_sja1000_config *config = dev->config; |
| |
| config->write_reg(dev, reg, val); |
| } |
| |
| static inline uint8_t can_sja1000_read_reg(const struct device *dev, uint8_t reg) |
| { |
| const struct can_sja1000_config *config = dev->config; |
| |
| return config->read_reg(dev, reg); |
| } |
| |
| static inline int can_sja1000_enter_reset_mode(const struct device *dev) |
| { |
| int retries = CAN_SJA1000_RESET_MODE_RETRIES; |
| uint8_t mod; |
| |
| mod = can_sja1000_read_reg(dev, CAN_SJA1000_MOD); |
| |
| while ((mod & CAN_SJA1000_MOD_RM) == 0) { |
| if (--retries < 0) { |
| return -EIO; |
| } |
| |
| can_sja1000_write_reg(dev, CAN_SJA1000_MOD, mod | CAN_SJA1000_MOD_RM); |
| k_sleep(CAN_SJA1000_RESET_MODE_DELAY); |
| mod = can_sja1000_read_reg(dev, CAN_SJA1000_MOD); |
| }; |
| |
| return 0; |
| } |
| |
| static inline void can_sja1000_leave_reset_mode_nowait(const struct device *dev) |
| { |
| uint8_t mod; |
| |
| mod = can_sja1000_read_reg(dev, CAN_SJA1000_MOD); |
| can_sja1000_write_reg(dev, CAN_SJA1000_MOD, mod & ~(CAN_SJA1000_MOD_RM)); |
| } |
| |
| static inline int can_sja1000_leave_reset_mode(const struct device *dev) |
| { |
| int retries = CAN_SJA1000_RESET_MODE_RETRIES; |
| uint8_t mod; |
| |
| mod = can_sja1000_read_reg(dev, CAN_SJA1000_MOD); |
| |
| while ((mod & CAN_SJA1000_MOD_RM) == 1) { |
| if (--retries < 0) { |
| return -EIO; |
| } |
| |
| can_sja1000_write_reg(dev, CAN_SJA1000_MOD, mod & ~(CAN_SJA1000_MOD_RM)); |
| k_sleep(CAN_SJA1000_RESET_MODE_DELAY); |
| mod = can_sja1000_read_reg(dev, CAN_SJA1000_MOD); |
| }; |
| |
| return 0; |
| } |
| |
| static inline void can_sja1000_clear_errors(const struct device *dev) |
| { |
| /* Clear error counters */ |
| can_sja1000_write_reg(dev, CAN_SJA1000_RXERR, 0); |
| can_sja1000_write_reg(dev, CAN_SJA1000_TXERR, 0); |
| |
| /* Clear error capture */ |
| (void)can_sja1000_read_reg(dev, CAN_SJA1000_ECC); |
| } |
| |
| static void can_sja1000_tx_done(const struct device *dev, int status) |
| { |
| struct can_sja1000_data *data = dev->data; |
| can_tx_callback_t callback = data->tx_callback; |
| void *user_data = data->tx_user_data; |
| |
| if (callback != NULL) { |
| data->tx_callback = NULL; |
| callback(dev, status, user_data); |
| } |
| |
| k_sem_give(&data->tx_idle); |
| } |
| |
| int can_sja1000_set_timing(const struct device *dev, const struct can_timing *timing) |
| { |
| struct can_sja1000_data *data = dev->data; |
| uint8_t btr0; |
| uint8_t btr1; |
| |
| if (data->common.started) { |
| return -EBUSY; |
| } |
| |
| k_mutex_lock(&data->mod_lock, K_FOREVER); |
| |
| btr0 = CAN_SJA1000_BTR0_BRP_PREP(timing->prescaler - 1) | |
| CAN_SJA1000_BTR0_SJW_PREP(timing->sjw - 1); |
| btr1 = CAN_SJA1000_BTR1_TSEG1_PREP(timing->phase_seg1 - 1) | |
| CAN_SJA1000_BTR1_TSEG2_PREP(timing->phase_seg2 - 1); |
| |
| if ((data->common.mode & CAN_MODE_3_SAMPLES) != 0) { |
| btr1 |= CAN_SJA1000_BTR1_SAM; |
| } |
| |
| can_sja1000_write_reg(dev, CAN_SJA1000_BTR0, btr0); |
| can_sja1000_write_reg(dev, CAN_SJA1000_BTR1, btr1); |
| |
| k_mutex_unlock(&data->mod_lock); |
| |
| return 0; |
| } |
| |
| int can_sja1000_get_capabilities(const struct device *dev, can_mode_t *cap) |
| { |
| ARG_UNUSED(dev); |
| |
| *cap = CAN_MODE_NORMAL | CAN_MODE_LOOPBACK | CAN_MODE_LISTENONLY | |
| CAN_MODE_ONE_SHOT | CAN_MODE_3_SAMPLES; |
| |
| if (IS_ENABLED(CONFIG_CAN_MANUAL_RECOVERY_MODE)) { |
| *cap |= CAN_MODE_MANUAL_RECOVERY; |
| } |
| |
| return 0; |
| } |
| |
| int can_sja1000_start(const struct device *dev) |
| { |
| const struct can_sja1000_config *config = dev->config; |
| struct can_sja1000_data *data = dev->data; |
| int err; |
| |
| if (data->common.started) { |
| return -EALREADY; |
| } |
| |
| if (config->common.phy != NULL) { |
| err = can_transceiver_enable(config->common.phy, data->common.mode); |
| if (err != 0) { |
| LOG_ERR("failed to enable CAN transceiver (err %d)", err); |
| return err; |
| } |
| } |
| |
| can_sja1000_clear_errors(dev); |
| CAN_STATS_RESET(dev); |
| |
| err = can_sja1000_leave_reset_mode(dev); |
| if (err != 0) { |
| if (config->common.phy != NULL) { |
| /* Attempt to disable the CAN transceiver in case of error */ |
| (void)can_transceiver_disable(config->common.phy); |
| } |
| |
| return err; |
| } |
| |
| data->common.started = true; |
| |
| return 0; |
| } |
| |
| int can_sja1000_stop(const struct device *dev) |
| { |
| const struct can_sja1000_config *config = dev->config; |
| struct can_sja1000_data *data = dev->data; |
| int err; |
| |
| if (!data->common.started) { |
| return -EALREADY; |
| } |
| |
| /* Entering reset mode aborts current transmission, if any */ |
| err = can_sja1000_enter_reset_mode(dev); |
| if (err != 0) { |
| return err; |
| } |
| |
| if (config->common.phy != NULL) { |
| err = can_transceiver_disable(config->common.phy); |
| if (err != 0) { |
| LOG_ERR("failed to disable CAN transceiver (err %d)", err); |
| return err; |
| } |
| } |
| |
| data->common.started = false; |
| |
| can_sja1000_tx_done(dev, -ENETDOWN); |
| |
| return 0; |
| } |
| |
| int can_sja1000_set_mode(const struct device *dev, can_mode_t mode) |
| { |
| can_mode_t supported = CAN_MODE_LOOPBACK | CAN_MODE_LISTENONLY | CAN_MODE_ONE_SHOT | |
| CAN_MODE_3_SAMPLES; |
| struct can_sja1000_data *data = dev->data; |
| uint8_t btr1; |
| uint8_t mod; |
| |
| if (IS_ENABLED(CONFIG_CAN_MANUAL_RECOVERY_MODE)) { |
| supported |= CAN_MODE_MANUAL_RECOVERY; |
| } |
| |
| if ((mode & ~(supported)) != 0) { |
| LOG_ERR("unsupported mode: 0x%08x", mode); |
| return -ENOTSUP; |
| } |
| |
| if (data->common.started) { |
| return -EBUSY; |
| } |
| |
| k_mutex_lock(&data->mod_lock, K_FOREVER); |
| |
| mod = can_sja1000_read_reg(dev, CAN_SJA1000_MOD); |
| mod |= CAN_SJA1000_MOD_AFM; |
| |
| if ((mode & CAN_MODE_LOOPBACK) != 0) { |
| /* (Local) self test mode */ |
| mod |= CAN_SJA1000_MOD_STM; |
| } else { |
| mod &= ~(CAN_SJA1000_MOD_STM); |
| } |
| |
| if ((mode & CAN_MODE_LISTENONLY) != 0) { |
| mod |= CAN_SJA1000_MOD_LOM; |
| } else { |
| mod &= ~(CAN_SJA1000_MOD_LOM); |
| } |
| |
| btr1 = can_sja1000_read_reg(dev, CAN_SJA1000_BTR1); |
| if ((mode & CAN_MODE_3_SAMPLES) != 0) { |
| btr1 |= CAN_SJA1000_BTR1_SAM; |
| } else { |
| btr1 &= ~(CAN_SJA1000_BTR1_SAM); |
| } |
| |
| can_sja1000_write_reg(dev, CAN_SJA1000_MOD, mod); |
| can_sja1000_write_reg(dev, CAN_SJA1000_BTR1, btr1); |
| |
| data->common.mode = mode; |
| |
| k_mutex_unlock(&data->mod_lock); |
| |
| return 0; |
| } |
| |
| static void can_sja1000_read_frame(const struct device *dev, struct can_frame *frame) |
| { |
| uint32_t id; |
| uint8_t info; |
| int i; |
| |
| memset(frame, 0, sizeof(*frame)); |
| |
| info = can_sja1000_read_reg(dev, CAN_SJA1000_FRAME_INFO); |
| |
| if ((info & CAN_SJA1000_FRAME_INFO_RTR) != 0) { |
| frame->flags |= CAN_FRAME_RTR; |
| } |
| |
| frame->dlc = CAN_SJA1000_FRAME_INFO_DLC_GET(info); |
| if (frame->dlc > CAN_MAX_DLC) { |
| LOG_ERR("RX frame DLC %u exceeds maximum (%d)", frame->dlc, CAN_MAX_DLC); |
| return; |
| } |
| |
| if ((info & CAN_SJA1000_FRAME_INFO_FF) != 0) { |
| frame->flags |= CAN_FRAME_IDE; |
| |
| id = FIELD_PREP(GENMASK(28, 21), |
| can_sja1000_read_reg(dev, CAN_SJA1000_XFF_ID1)); |
| id |= FIELD_PREP(GENMASK(20, 13), |
| can_sja1000_read_reg(dev, CAN_SJA1000_XFF_ID2)); |
| id |= FIELD_PREP(GENMASK(12, 5), |
| can_sja1000_read_reg(dev, CAN_SJA1000_EFF_ID3)); |
| id |= FIELD_PREP(GENMASK(4, 0), |
| can_sja1000_read_reg(dev, CAN_SJA1000_EFF_ID4) >> 3); |
| frame->id = id; |
| |
| if ((frame->flags & CAN_FRAME_RTR) == 0U) { |
| for (i = 0; i < frame->dlc; i++) { |
| frame->data[i] = can_sja1000_read_reg(dev, CAN_SJA1000_EFF_DATA + |
| i); |
| } |
| } |
| } else { |
| id = FIELD_PREP(GENMASK(10, 3), |
| can_sja1000_read_reg(dev, CAN_SJA1000_XFF_ID1)); |
| id |= FIELD_PREP(GENMASK(2, 0), |
| can_sja1000_read_reg(dev, CAN_SJA1000_XFF_ID2) >> 5); |
| frame->id = id; |
| |
| if ((frame->flags & CAN_FRAME_RTR) == 0U) { |
| for (i = 0; i < frame->dlc; i++) { |
| frame->data[i] = can_sja1000_read_reg(dev, CAN_SJA1000_SFF_DATA + |
| i); |
| } |
| } |
| } |
| } |
| |
| void can_sja1000_write_frame(const struct device *dev, const struct can_frame *frame) |
| { |
| uint32_t id; |
| uint8_t info; |
| int i; |
| |
| info = CAN_SJA1000_FRAME_INFO_DLC_PREP(frame->dlc); |
| |
| if ((frame->flags & CAN_FRAME_RTR) != 0) { |
| info |= CAN_SJA1000_FRAME_INFO_RTR; |
| } |
| |
| if ((frame->flags & CAN_FRAME_IDE) != 0) { |
| info |= CAN_SJA1000_FRAME_INFO_FF; |
| } |
| |
| can_sja1000_write_reg(dev, CAN_SJA1000_FRAME_INFO, info); |
| |
| if ((frame->flags & CAN_FRAME_IDE) != 0) { |
| id = frame->id; |
| can_sja1000_write_reg(dev, CAN_SJA1000_XFF_ID1, |
| FIELD_GET(GENMASK(28, 21), id)); |
| can_sja1000_write_reg(dev, CAN_SJA1000_XFF_ID2, |
| FIELD_GET(GENMASK(20, 13), id)); |
| can_sja1000_write_reg(dev, CAN_SJA1000_EFF_ID3, |
| FIELD_GET(GENMASK(12, 5), id)); |
| can_sja1000_write_reg(dev, CAN_SJA1000_EFF_ID4, |
| FIELD_GET(GENMASK(4, 0), id) << 3); |
| |
| if ((frame->flags & CAN_FRAME_RTR) == 0U) { |
| for (i = 0; i < frame->dlc; i++) { |
| can_sja1000_write_reg(dev, CAN_SJA1000_EFF_DATA + i, |
| frame->data[i]); |
| } |
| } |
| } else { |
| id = frame->id; |
| can_sja1000_write_reg(dev, CAN_SJA1000_XFF_ID1, |
| FIELD_GET(GENMASK(10, 3), id)); |
| can_sja1000_write_reg(dev, CAN_SJA1000_XFF_ID2, |
| FIELD_GET(GENMASK(2, 0), id) << 5); |
| |
| if ((frame->flags & CAN_FRAME_RTR) == 0U) { |
| for (i = 0; i < frame->dlc; i++) { |
| can_sja1000_write_reg(dev, CAN_SJA1000_SFF_DATA + i, |
| frame->data[i]); |
| } |
| } |
| } |
| } |
| |
| int can_sja1000_send(const struct device *dev, const struct can_frame *frame, k_timeout_t timeout, |
| can_tx_callback_t callback, void *user_data) |
| { |
| struct can_sja1000_data *data = dev->data; |
| uint8_t cmr; |
| uint8_t sr; |
| |
| if (frame->dlc > CAN_MAX_DLC) { |
| LOG_ERR("TX frame DLC %u exceeds maximum (%d)", frame->dlc, CAN_MAX_DLC); |
| return -EINVAL; |
| } |
| |
| if ((frame->flags & ~(CAN_FRAME_IDE | CAN_FRAME_RTR)) != 0) { |
| LOG_ERR("unsupported CAN frame flags 0x%02x", frame->flags); |
| return -ENOTSUP; |
| } |
| |
| if (!data->common.started) { |
| return -ENETDOWN; |
| } |
| |
| if (data->state == CAN_STATE_BUS_OFF) { |
| LOG_DBG("transmit failed, bus-off"); |
| return -ENETUNREACH; |
| } |
| |
| if (k_sem_take(&data->tx_idle, timeout) != 0) { |
| return -EAGAIN; |
| } |
| |
| sr = can_sja1000_read_reg(dev, CAN_SJA1000_SR); |
| if ((sr & CAN_SJA1000_SR_TBS) == 0) { |
| LOG_ERR("transmit buffer locked, sr = 0x%02x", sr); |
| return -EIO; |
| } |
| |
| data->tx_callback = callback; |
| data->tx_user_data = user_data; |
| |
| can_sja1000_write_frame(dev, frame); |
| |
| if ((data->common.mode & CAN_MODE_LOOPBACK) != 0) { |
| cmr = CAN_SJA1000_CMR_SRR; |
| } else { |
| cmr = CAN_SJA1000_CMR_TR; |
| } |
| |
| if ((data->common.mode & CAN_MODE_ONE_SHOT) != 0) { |
| cmr |= CAN_SJA1000_CMR_AT; |
| } |
| |
| can_sja1000_write_reg(dev, CAN_SJA1000_CMR, cmr); |
| |
| return 0; |
| } |
| |
| int can_sja1000_add_rx_filter(const struct device *dev, can_rx_callback_t callback, void *user_data, |
| const struct can_filter *filter) |
| { |
| struct can_sja1000_data *data = dev->data; |
| int filter_id = -ENOSPC; |
| int i; |
| |
| if ((filter->flags & ~(CAN_FILTER_IDE)) != 0) { |
| LOG_ERR("unsupported CAN filter flags 0x%02x", filter->flags); |
| return -ENOTSUP; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(data->filters); i++) { |
| if (!atomic_test_and_set_bit(data->rx_allocs, i)) { |
| filter_id = i; |
| break; |
| } |
| } |
| |
| if (filter_id >= 0) { |
| data->filters[filter_id].filter = *filter; |
| data->filters[filter_id].user_data = user_data; |
| data->filters[filter_id].callback = callback; |
| } |
| |
| return filter_id; |
| } |
| |
| void can_sja1000_remove_rx_filter(const struct device *dev, int filter_id) |
| { |
| struct can_sja1000_data *data = dev->data; |
| |
| if (filter_id < 0 || filter_id >= ARRAY_SIZE(data->filters)) { |
| LOG_ERR("filter ID %d out of bounds", filter_id); |
| return; |
| } |
| |
| if (atomic_test_and_clear_bit(data->rx_allocs, filter_id)) { |
| data->filters[filter_id].callback = NULL; |
| data->filters[filter_id].user_data = NULL; |
| data->filters[filter_id].filter = (struct can_filter){0}; |
| } |
| } |
| |
| #ifdef CONFIG_CAN_MANUAL_RECOVERY_MODE |
| int can_sja1000_recover(const struct device *dev, k_timeout_t timeout) |
| { |
| struct can_sja1000_data *data = dev->data; |
| int64_t start_ticks; |
| uint8_t sr; |
| int err; |
| |
| if (!data->common.started) { |
| return -ENETDOWN; |
| } |
| |
| if ((data->common.mode & CAN_MODE_MANUAL_RECOVERY) == 0U) { |
| return -ENOTSUP; |
| } |
| |
| sr = can_sja1000_read_reg(dev, CAN_SJA1000_SR); |
| if ((sr & CAN_SJA1000_SR_BS) == 0) { |
| return 0; |
| } |
| |
| start_ticks = k_uptime_ticks(); |
| |
| err = k_mutex_lock(&data->mod_lock, timeout); |
| if (err != 0) { |
| LOG_WRN("failed to acquire MOD lock"); |
| return err; |
| } |
| |
| err = can_sja1000_leave_reset_mode(dev); |
| if (err != 0) { |
| LOG_ERR("failed to initiate bus recovery"); |
| k_mutex_unlock(&data->mod_lock); |
| return err; |
| } |
| |
| k_mutex_unlock(&data->mod_lock); |
| |
| while ((sr & CAN_SJA1000_SR_BS) != 0) { |
| if (k_uptime_ticks() - start_ticks > timeout.ticks) { |
| LOG_WRN("bus recovery timed out"); |
| return -EAGAIN; |
| } |
| |
| sr = can_sja1000_read_reg(dev, CAN_SJA1000_SR); |
| } |
| |
| return 0; |
| } |
| #endif /* CONFIG_CAN_MANUAL_RECOVERY_MODE */ |
| |
| int can_sja1000_get_state(const struct device *dev, enum can_state *state, |
| struct can_bus_err_cnt *err_cnt) |
| { |
| struct can_sja1000_data *data = dev->data; |
| |
| if (state != NULL) { |
| if (!data->common.started) { |
| *state = CAN_STATE_STOPPED; |
| } else { |
| *state = data->state; |
| } |
| } |
| |
| if (err_cnt != NULL) { |
| err_cnt->rx_err_cnt = can_sja1000_read_reg(dev, CAN_SJA1000_RXERR); |
| err_cnt->tx_err_cnt = can_sja1000_read_reg(dev, CAN_SJA1000_TXERR); |
| } |
| |
| return 0; |
| } |
| |
| void can_sja1000_set_state_change_callback(const struct device *dev, |
| can_state_change_callback_t callback, void *user_data) |
| { |
| struct can_sja1000_data *data = dev->data; |
| |
| data->common.state_change_cb = callback; |
| data->common.state_change_cb_user_data = user_data; |
| } |
| |
| int can_sja1000_get_max_filters(const struct device *dev, bool ide) |
| { |
| ARG_UNUSED(dev); |
| ARG_UNUSED(ide); |
| |
| return CONFIG_CAN_MAX_FILTER; |
| } |
| |
| static void can_sja1000_handle_receive_irq(const struct device *dev) |
| { |
| struct can_sja1000_data *data = dev->data; |
| struct can_frame frame; |
| can_rx_callback_t callback; |
| uint8_t sr; |
| int i; |
| |
| do { |
| can_sja1000_read_frame(dev, &frame); |
| |
| #ifndef CONFIG_CAN_ACCEPT_RTR |
| if ((frame.flags & CAN_FRAME_RTR) == 0U) { |
| #endif /* !CONFIG_CAN_ACCEPT_RTR */ |
| for (i = 0; i < ARRAY_SIZE(data->filters); i++) { |
| if (!atomic_test_bit(data->rx_allocs, i)) { |
| continue; |
| } |
| |
| if (can_frame_matches_filter(&frame, &data->filters[i].filter)) { |
| callback = data->filters[i].callback; |
| if (callback != NULL) { |
| callback(dev, &frame, data->filters[i].user_data); |
| } |
| } |
| } |
| #ifndef CONFIG_CAN_ACCEPT_RTR |
| } |
| #endif /* !CONFIG_CAN_ACCEPT_RTR */ |
| |
| can_sja1000_write_reg(dev, CAN_SJA1000_CMR, CAN_SJA1000_CMR_RRB); |
| sr = can_sja1000_read_reg(dev, CAN_SJA1000_SR); |
| } while ((sr & CAN_SJA1000_SR_RBS) != 0); |
| } |
| |
| static void can_sja1000_handle_transmit_irq(const struct device *dev) |
| { |
| int status = 0; |
| uint8_t sr; |
| |
| sr = can_sja1000_read_reg(dev, CAN_SJA1000_SR); |
| if ((sr & CAN_SJA1000_SR_TCS) == 0) { |
| status = -EIO; |
| } |
| |
| can_sja1000_tx_done(dev, status); |
| } |
| |
| #ifdef CONFIG_CAN_STATS |
| static void can_sja1000_handle_data_overrun_irq(const struct device *dev) |
| { |
| /* See NXP SJA1000 Application Note AN97076 (figure 18) for data overrun details */ |
| |
| CAN_STATS_RX_OVERRUN_INC(dev); |
| |
| can_sja1000_write_reg(dev, CAN_SJA1000_CMR, CAN_SJA1000_CMR_CDO); |
| } |
| |
| static void can_sja1000_handle_bus_error_irq(const struct device *dev) |
| { |
| /* See NXP SJA1000 Application Note AN97076 (tables 6 and 7) for ECC details */ |
| uint8_t ecc; |
| |
| /* Read the Error Code Capture register to re-activate it */ |
| ecc = can_sja1000_read_reg(dev, CAN_SJA1000_ECC); |
| |
| if (ecc == (CAN_SJA1000_ECC_ERRC_OTHER_ERROR | CAN_SJA1000_ECC_DIR_TX | |
| CAN_SJA1000_ECC_SEG_ACK_SLOT)) { |
| /* Missing ACK is reported as a TX "other" error in the ACK slot */ |
| CAN_STATS_ACK_ERROR_INC(dev); |
| return; |
| } |
| |
| if (ecc == (CAN_SJA1000_ECC_ERRC_FORM_ERROR | CAN_SJA1000_ECC_DIR_RX | |
| CAN_SJA1000_ECC_SEG_ACK_DELIM)) { |
| /* CRC error is reported as a RX "form" error in the ACK delimiter */ |
| CAN_STATS_CRC_ERROR_INC(dev); |
| return; |
| } |
| |
| switch (ecc & CAN_SJA1000_ECC_ERRC_MASK) { |
| case CAN_SJA1000_ECC_ERRC_BIT_ERROR: |
| CAN_STATS_BIT_ERROR_INC(dev); |
| break; |
| |
| case CAN_SJA1000_ECC_ERRC_FORM_ERROR: |
| CAN_STATS_FORM_ERROR_INC(dev); |
| break; |
| case CAN_SJA1000_ECC_ERRC_STUFF_ERROR: |
| CAN_STATS_STUFF_ERROR_INC(dev); |
| break; |
| |
| case CAN_SJA1000_ECC_ERRC_OTHER_ERROR: |
| __fallthrough; |
| default: |
| /* Other error not currently reported in CAN statistics */ |
| break; |
| } |
| } |
| #endif /* CONFIG_CAN_STATS */ |
| |
| static void can_sja1000_handle_error_warning_irq(const struct device *dev) |
| { |
| struct can_sja1000_data *data = dev->data; |
| uint8_t sr; |
| |
| sr = can_sja1000_read_reg(dev, CAN_SJA1000_SR); |
| if ((sr & CAN_SJA1000_SR_BS) != 0) { |
| data->state = CAN_STATE_BUS_OFF; |
| can_sja1000_tx_done(dev, -ENETUNREACH); |
| |
| if (data->common.started && |
| (data->common.mode & CAN_MODE_MANUAL_RECOVERY) == 0U) { |
| can_sja1000_leave_reset_mode_nowait(dev); |
| } |
| } else if ((sr & CAN_SJA1000_SR_ES) != 0) { |
| data->state = CAN_STATE_ERROR_WARNING; |
| } else { |
| data->state = CAN_STATE_ERROR_ACTIVE; |
| } |
| } |
| |
| static void can_sja1000_handle_error_passive_irq(const struct device *dev) |
| { |
| struct can_sja1000_data *data = dev->data; |
| |
| if (data->state == CAN_STATE_ERROR_PASSIVE) { |
| data->state = CAN_STATE_ERROR_WARNING; |
| } else { |
| data->state = CAN_STATE_ERROR_PASSIVE; |
| } |
| } |
| |
| void can_sja1000_isr(const struct device *dev) |
| { |
| struct can_sja1000_data *data = dev->data; |
| const can_state_change_callback_t cb = data->common.state_change_cb; |
| void *cb_data = data->common.state_change_cb_user_data; |
| enum can_state prev_state = data->state; |
| struct can_bus_err_cnt err_cnt; |
| uint8_t ir; |
| |
| ir = can_sja1000_read_reg(dev, CAN_SJA1000_IR); |
| |
| if ((ir & CAN_SJA1000_IR_TI) != 0) { |
| can_sja1000_handle_transmit_irq(dev); |
| } |
| |
| if ((ir & CAN_SJA1000_IR_RI) != 0) { |
| can_sja1000_handle_receive_irq(dev); |
| } |
| |
| #ifdef CONFIG_CAN_STATS |
| if ((ir & CAN_SJA1000_IR_DOI) != 0) { |
| can_sja1000_handle_data_overrun_irq(dev); |
| } |
| |
| if ((ir & CAN_SJA1000_IR_BEI) != 0) { |
| can_sja1000_handle_bus_error_irq(dev); |
| } |
| #endif /* CONFIG_CAN_STATS */ |
| |
| if ((ir & CAN_SJA1000_IR_EI) != 0) { |
| can_sja1000_handle_error_warning_irq(dev); |
| } |
| |
| if ((ir & CAN_SJA1000_IR_EPI) != 0) { |
| can_sja1000_handle_error_passive_irq(dev); |
| } |
| |
| if (prev_state != data->state && cb != NULL) { |
| err_cnt.rx_err_cnt = can_sja1000_read_reg(dev, CAN_SJA1000_RXERR); |
| err_cnt.tx_err_cnt = can_sja1000_read_reg(dev, CAN_SJA1000_TXERR); |
| cb(dev, data->state, err_cnt, cb_data); |
| } |
| } |
| |
| int can_sja1000_init(const struct device *dev) |
| { |
| const struct can_sja1000_config *config = dev->config; |
| struct can_sja1000_data *data = dev->data; |
| struct can_timing timing = { 0 }; |
| int err; |
| |
| __ASSERT_NO_MSG(config->read_reg != NULL); |
| __ASSERT_NO_MSG(config->write_reg != NULL); |
| |
| if (config->common.phy != NULL) { |
| if (!device_is_ready(config->common.phy)) { |
| LOG_ERR("CAN transceiver not ready"); |
| return -ENODEV; |
| } |
| } |
| |
| k_mutex_init(&data->mod_lock); |
| k_sem_init(&data->tx_idle, 1, 1); |
| |
| data->state = CAN_STATE_ERROR_ACTIVE; |
| |
| /* See NXP SJA1000 Application Note AN97076 (figure 12) for initialization sequence */ |
| |
| /* Enter reset mode */ |
| err = can_sja1000_enter_reset_mode(dev); |
| if (err != 0) { |
| return err; |
| } |
| |
| /* Set PeliCAN mode */ |
| can_sja1000_write_reg(dev, CAN_SJA1000_CDR, config->cdr | CAN_SJA1000_CDR_CAN_MODE); |
| |
| /* Set up acceptance code and mask to match any frame (software filtering) */ |
| can_sja1000_write_reg(dev, CAN_SJA1000_ACR0, 0x00); |
| can_sja1000_write_reg(dev, CAN_SJA1000_ACR1, 0x00); |
| can_sja1000_write_reg(dev, CAN_SJA1000_ACR2, 0x00); |
| can_sja1000_write_reg(dev, CAN_SJA1000_ACR3, 0x00); |
| |
| can_sja1000_write_reg(dev, CAN_SJA1000_AMR0, 0xFF); |
| can_sja1000_write_reg(dev, CAN_SJA1000_AMR1, 0xFF); |
| can_sja1000_write_reg(dev, CAN_SJA1000_AMR2, 0xFF); |
| can_sja1000_write_reg(dev, CAN_SJA1000_AMR3, 0xFF); |
| |
| err = can_calc_timing(dev, &timing, config->common.bitrate, |
| config->common.sample_point); |
| if (err == -EINVAL) { |
| LOG_ERR("bitrate/sample point cannot be met (err %d)", err); |
| return err; |
| } |
| |
| LOG_DBG("initial sample point error: %d", err); |
| |
| /* Configure timing */ |
| err = can_set_timing(dev, &timing); |
| if (err != 0) { |
| LOG_ERR("timing parameters cannot be met (err %d)", err); |
| return err; |
| } |
| |
| /* Set output control */ |
| can_sja1000_write_reg(dev, CAN_SJA1000_OCR, config->ocr); |
| |
| /* Clear error counters and error capture */ |
| can_sja1000_clear_errors(dev); |
| |
| /* Set error warning limit */ |
| can_sja1000_write_reg(dev, CAN_SJA1000_EWLR, 96); |
| |
| /* Set normal mode */ |
| data->common.mode = CAN_MODE_NORMAL; |
| err = can_sja1000_set_mode(dev, CAN_MODE_NORMAL); |
| if (err != 0) { |
| return err; |
| } |
| |
| /* Enable interrupts */ |
| can_sja1000_write_reg(dev, CAN_SJA1000_IER, |
| #ifdef CONFIG_CAN_STATS |
| CAN_SJA1000_IER_BEIE | CAN_SJA1000_IER_DOIE | |
| #endif /* CONFIG_CAN_STATS */ |
| CAN_SJA1000_IER_RIE | CAN_SJA1000_IER_TIE | |
| CAN_SJA1000_IER_EIE | CAN_SJA1000_IER_EPIE); |
| |
| return 0; |
| } |