| /* |
| * |
| * Copyright (c) 2018 Ilya Tagunov |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| |
| #include <soc.h> |
| #include <stm32_ll_bus.h> |
| #include <stm32_ll_rcc.h> |
| #include <stm32_ll_pwr.h> |
| #include <stm32_ll_utils.h> |
| #include <zephyr/drivers/clock_control.h> |
| #include <zephyr/sys/util.h> |
| #include <zephyr/drivers/clock_control/stm32_clock_control.h> |
| #include "clock_stm32_ll_common.h" |
| |
| #if defined(STM32_PLL_ENABLED) |
| |
| /* Macros to fill up multiplication and division factors values */ |
| #define z_pll_mul(v) LL_RCC_PLL_MUL_ ## v |
| #define pll_mul(v) z_pll_mul(v) |
| |
| #define z_pll_div(v) LL_RCC_PLL_DIV_ ## v |
| #define pll_div(v) z_pll_div(v) |
| |
| /** |
| * @brief Return PLL source |
| */ |
| __unused |
| static uint32_t get_pll_source(void) |
| { |
| /* Configure PLL source */ |
| if (IS_ENABLED(STM32_PLL_SRC_HSI)) { |
| return LL_RCC_PLLSOURCE_HSI; |
| } else if (IS_ENABLED(STM32_PLL_SRC_HSE)) { |
| return LL_RCC_PLLSOURCE_HSE; |
| } |
| |
| __ASSERT(0, "Invalid source"); |
| return 0; |
| } |
| |
| /** |
| * @brief get the pll source frequency |
| */ |
| __unused |
| uint32_t get_pllsrc_frequency(void) |
| { |
| if (IS_ENABLED(STM32_PLL_SRC_HSI)) { |
| return STM32_HSI_FREQ; |
| } else if (IS_ENABLED(STM32_PLL_SRC_HSE)) { |
| return STM32_HSE_FREQ; |
| } |
| |
| __ASSERT(0, "Invalid source"); |
| return 0; |
| } |
| |
| /** |
| * @brief Set up pll configuration |
| */ |
| __unused |
| void config_pll_sysclock(void) |
| { |
| LL_RCC_PLL_ConfigDomain_SYS(get_pll_source(), |
| pll_mul(STM32_PLL_MULTIPLIER), |
| pll_div(STM32_PLL_DIVISOR)); |
| } |
| |
| /** |
| * @brief Return pllout frequency |
| */ |
| __unused |
| uint32_t get_pllout_frequency(void) |
| { |
| return __LL_RCC_CALC_PLLCLK_FREQ(get_pllsrc_frequency(), |
| pll_mul(STM32_PLL_MULTIPLIER), |
| pll_div(STM32_PLL_DIVISOR)); |
| } |
| |
| #endif /* defined(STM32_PLL_ENABLED) */ |
| |
| /** |
| * @brief Set up voltage regulator voltage |
| */ |
| void config_regulator_voltage(uint32_t hclk_freq) |
| { |
| if (hclk_freq <= MHZ(4.2)) { |
| LL_PWR_SetRegulVoltageScaling(LL_PWR_REGU_VOLTAGE_SCALE3); |
| } else if (hclk_freq <= MHZ(16)) { |
| LL_PWR_SetRegulVoltageScaling(LL_PWR_REGU_VOLTAGE_SCALE2); |
| } else { |
| LL_PWR_SetRegulVoltageScaling(LL_PWR_REGU_VOLTAGE_SCALE1); |
| } |
| while (LL_PWR_IsActiveFlag_VOS() == 1) { |
| } |
| } |
| |
| /** |
| * @brief Activate default clocks |
| */ |
| void config_enable_default_clocks(void) |
| { |
| #if defined(CONFIG_EXTI_STM32) || defined(CONFIG_USB_DC_STM32) || \ |
| (defined(CONFIG_SOC_SERIES_STM32L0X) && \ |
| defined(CONFIG_ENTROPY_STM32_RNG)) |
| /* Enable System Configuration Controller clock. */ |
| LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_SYSCFG); |
| #endif |
| LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_PWR); |
| } |