dts/sparc/gaisler/gr716a.dtsi

/*
 * Copyright (c) 2020 Cobham Gaisler AB
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include "skeleton.dtsi"
#include <dt-bindings/gpio/gpio.h>

/ {
	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu0: cpu@0 {
			compatible = "gaisler,leon3";
			reg = <0>;
		};
	};

	dram: ram@30000000 {
		/* tightly coupled data RAM */
		reg = <0x30000000 0x00010000>;
	};

	iram: ram@31000000 {
		/* tightly coupled instruction RAM */
		reg = <0x31000000 0x00020000>;
	};

	soc {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "gaisler,gr716-soc", "simple-bus";
		ranges;
		interrupt-parent = <&irqmp>;

		irqmp: irqmp0@80002000 {
			compatible = "gaisler,irqmp";
			reg = <0x80002000 0x400>;
			eirq = <1>;
			interrupt-controller;
			#interrupt-cells = <1>;
		};

		timer0: gptimer@80003000 {
			compatible = "gaisler,gptimer";
			interrupts = <9>;
			reg = <0x80003000 0x100>;
		};

		uart0: apbuart@80300000 {
			compatible = "gaisler,apbuart";
			interrupts = <24>;
			reg = <0x80300000 0x100>;
			status = "disabled";
		};

		uart1: apbuart@80301000 {
			compatible = "gaisler,apbuart";
			interrupts = <25>;
			reg = <0x80301000 0x100>;
			status = "disabled";
		};

		uart2: apbuart@80302000 {
			compatible = "gaisler,apbuart";
			interrupts = <3>;
			reg = <0x80302000 0x100>;
			status = "disabled";
		};

		uart3: apbuart@80303000 {
			compatible = "gaisler,apbuart";
			interrupts = <5>;
			reg = <0x80303000 0x100>;
			status = "disabled";
		};

		uart4: apbuart@80304000 {
			compatible = "gaisler,apbuart";
			interrupts = <6>;
			reg = <0x80304000 0x100>;
			status = "disabled";
		};

		uart5: apbuart@80305000 {
			compatible = "gaisler,apbuart";
			interrupts = <7>;
			reg = <0x80305000 0x100>;
			status = "disabled";
		};

		spim0: spi@fff00100 {
			compatible = "gaisler,spimctrl";
			reg = <0xfff00100 0x100>;
			interrupts = <2 0>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		spim1: spi@fff00200 {
			compatible = "gaisler,spimctrl";
			reg = <0xfff00200 0x100>;
			interrupts = <2 0>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		gpio0: gpio@8030c000 {
			interrupts = <17>;
			reg = <0x8030c000 0x1000>;
			compatible = "gaisler,grgpio";
			gpio-controller;
			#gpio-cells = <2>;
			status = "disabled";
		};

		gpio1: gpio@8030d000 {
			interrupts = <16>;
			reg = <0x8030d000 0x1000>;
			compatible = "gaisler,grgpio";
			gpio-controller;
			#gpio-cells = <2>;
			status = "disabled";
		};
	};
};