| /** |
| ****************************************************************************** |
| * @file stm32f3xx_hal_pcd_ex.h |
| * @author MCD Application Team |
| * @version V1.4.0 |
| * @date 16-December-2016 |
| * @brief Header file of PCD HAL Extension module. |
| ****************************************************************************** |
| * @attention |
| * |
| * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> |
| * |
| * Redistribution and use in source and binary forms, with or without modification, |
| * are permitted provided that the following conditions are met: |
| * 1. Redistributions of source code must retain the above copyright notice, |
| * this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright notice, |
| * this list of conditions and the following disclaimer in the documentation |
| * and/or other materials provided with the distribution. |
| * 3. Neither the name of STMicroelectronics nor the names of its contributors |
| * may be used to endorse or promote products derived from this software |
| * without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
| * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
| * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
| * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Define to prevent recursive inclusion -------------------------------------*/ |
| #ifndef __STM32F3xx_HAL_PCD_EX_H |
| #define __STM32F3xx_HAL_PCD_EX_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| #if defined(STM32F302xE) || defined(STM32F303xE) || \ |
| defined(STM32F302xC) || defined(STM32F303xC) || \ |
| defined(STM32F302x8) || \ |
| defined(STM32F373xC) |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32f3xx_hal_def.h" |
| |
| /** @addtogroup STM32F3xx_HAL_Driver |
| * @{ |
| */ |
| |
| /** @addtogroup PCDEx |
| * @{ |
| */ |
| |
| /* Exported types ------------------------------------------------------------*/ |
| /* Exported constants --------------------------------------------------------*/ |
| /* Exported macros -----------------------------------------------------------*/ |
| /** @defgroup PCDEx_Exported_Macros PCD Extended Exported Macros |
| * @{ |
| */ |
| /** |
| * @brief Gets address in an endpoint register. |
| * @param USBx: USB peripheral instance register address. |
| * @param bEpNum: Endpoint Number. |
| * @retval None |
| */ |
| |
| #if defined(STM32F302xC) || defined(STM32F303xC) || \ |
| defined(STM32F373xC) |
| |
| #define PCD_EP_TX_ADDRESS(USBx, bEpNum) ((uint16_t *)((uint32_t)((((USBx)->BTABLE+(bEpNum)*8)*2+ ((uint32_t)(USBx) + 0x400U))))) |
| #define PCD_EP_TX_CNT(USBx, bEpNum) ((uint16_t *)((uint32_t)((((USBx)->BTABLE+(bEpNum)*8+2)*2+ ((uint32_t)(USBx) + 0x400U))))) |
| #define PCD_EP_RX_ADDRESS(USBx, bEpNum) ((uint16_t *)((uint32_t)((((USBx)->BTABLE+(bEpNum)*8+4)*2+ ((uint32_t)(USBx) + 0x400U))))) |
| #define PCD_EP_RX_CNT(USBx, bEpNum) ((uint16_t *)((uint32_t)((((USBx)->BTABLE+(bEpNum)*8+6)*2+ ((uint32_t)(USBx) + 0x400U))))) |
| |
| |
| #define PCD_SET_EP_RX_CNT(USBx, bEpNum,wCount) {\ |
| uint16_t *pdwReg =PCD_EP_RX_CNT((USBx),(bEpNum)); \ |
| PCD_SET_EP_CNT_RX_REG((pdwReg), (wCount))\ |
| } |
| |
| #endif /* STM32F302xC || STM32F303xC || */ |
| /* STM32F373xC */ |
| |
| |
| #if defined(STM32F302xE) || defined(STM32F303xE) || \ |
| defined(STM32F302x8) |
| |
| #define PCD_EP_TX_ADDRESS(USBx, bEpNum) ((uint16_t *)((uint32_t)((((USBx)->BTABLE+(bEpNum)*8)+ ((uint32_t)(USBx) + 0x400U))))) |
| #define PCD_EP_TX_CNT(USBx, bEpNum) ((uint16_t *)((uint32_t)((((USBx)->BTABLE+(bEpNum)*8+2)+ ((uint32_t)(USBx) + 0x400U))))) |
| #define PCD_EP_RX_ADDRESS(USBx, bEpNum) ((uint16_t *)((uint32_t)((((USBx)->BTABLE+(bEpNum)*8+4)+ ((uint32_t)(USBx) + 0x400U))))) |
| #define PCD_EP_RX_CNT(USBx, bEpNum) ((uint16_t *)((uint32_t)((((USBx)->BTABLE+(bEpNum)*8+6)+ ((uint32_t)(USBx) + 0x400U))))) |
| |
| #define PCD_SET_EP_RX_CNT(USBx, bEpNum,wCount) {\ |
| uint16_t *pdwReg = PCD_EP_RX_CNT((USBx), (bEpNum));\ |
| PCD_SET_EP_CNT_RX_REG((pdwReg), (wCount))\ |
| } |
| |
| #endif /* STM32F302xE || STM32F303xE || */ |
| /* STM32F302x8 */ |
| /** |
| * @} |
| */ |
| |
| /* Exported functions --------------------------------------------------------*/ |
| /** @addtogroup PCDEx_Exported_Functions PCDEx Exported Functions |
| * @{ |
| */ |
| /** @addtogroup PCDEx_Exported_Functions_Group1 Peripheral Control functions |
| * @{ |
| */ |
| HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd, |
| uint16_t ep_addr, |
| uint16_t ep_kind, |
| uint32_t pmaadress); |
| |
| void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state); |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| #endif /* STM32F302xE || STM32F303xE || */ |
| /* STM32F302xC || STM32F303xC || */ |
| /* STM32F302x8 || */ |
| /* STM32F373xC */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| |
| #endif /* __STM32F3xx_HAL_PCD_EX_H */ |
| |
| /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |