| /* |
| * Copyright (c) 2017, NXP |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #ifndef __INC_BOARD_H |
| #define __INC_BOARD_H |
| |
| #include <soc.h> |
| |
| /* Push button switch for test purposes */ |
| #define SW0_TEST_GPIO_NAME CONFIG_GPIO_MCUX_PORTA_NAME |
| #define SW0_TEST_GPIO_PIN 16 |
| |
| /* Push button switch for test purposes */ |
| #define SW1_TEST_GPIO_NAME CONFIG_GPIO_MCUX_PORTA_NAME |
| #define SW1_TEST_GPIO_PIN 17 |
| |
| /* Red LED */ |
| #define RED_GPIO_NAME CONFIG_GPIO_MCUX_PORTB_NAME |
| #define RED_GPIO_PIN 18 |
| |
| /* Green LED */ |
| #define GREEN_GPIO_NAME CONFIG_GPIO_MCUX_PORTB_NAME |
| #define GREEN_GPIO_PIN 19 |
| |
| /* Blue LED */ |
| #define BLUE_GPIO_NAME CONFIG_GPIO_MCUX_PORTD_NAME |
| #define BLUE_GPIO_PIN 1 |
| |
| /* LED0. There is no physical LED on the board with this name, so create an |
| * alias to the green LED to make the basic blinky sample work. |
| */ |
| #define LED0_GPIO_PORT GREEN_GPIO_NAME |
| #define LED0_GPIO_PIN GREEN_GPIO_PIN |
| |
| /* Push button switch 0. There is no physical switch on the board, |
| * so an push button must be added to such pins for basic button sample work. |
| */ |
| #define SW0_GPIO_NAME SW0_TEST_GPIO_NAME |
| #define SW0_GPIO_PIN SW0_TEST_GPIO_PIN |
| |
| #endif /* __INC_BOARD_H */ |
