| /* |
| * Copyright (c) 2018 Intel Corporation |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <zephyr/kernel.h> |
| #include <errno.h> |
| #include <sys/types.h> |
| #include <zephyr/sys/util.h> |
| |
| #include <zephyr/settings/settings.h> |
| |
| #define BT_DBG_ENABLED IS_ENABLED(CONFIG_BT_MESH_DEBUG_SETTINGS) |
| #define LOG_MODULE_NAME bt_mesh_settings |
| #include "common/log.h" |
| |
| #include "host/hci_core.h" |
| #include "mesh.h" |
| #include "subnet.h" |
| #include "app_keys.h" |
| #include "net.h" |
| #include "cdb.h" |
| #include "crypto.h" |
| #include "rpl.h" |
| #include "transport.h" |
| #include "heartbeat.h" |
| #include "access.h" |
| #include "proxy.h" |
| #include "pb_gatt_srv.h" |
| #include "settings.h" |
| #include "cfg.h" |
| |
| #ifdef CONFIG_BT_MESH_RPL_STORE_TIMEOUT |
| #define RPL_STORE_TIMEOUT CONFIG_BT_MESH_RPL_STORE_TIMEOUT |
| #else |
| #define RPL_STORE_TIMEOUT (-1) |
| #endif |
| |
| static struct k_work_delayable pending_store; |
| static ATOMIC_DEFINE(pending_flags, BT_MESH_SETTINGS_FLAG_COUNT); |
| |
| int bt_mesh_settings_set(settings_read_cb read_cb, void *cb_arg, |
| void *out, size_t read_len) |
| { |
| ssize_t len; |
| |
| len = read_cb(cb_arg, out, read_len); |
| if (len < 0) { |
| BT_ERR("Failed to read value (err %zd)", len); |
| return len; |
| } |
| |
| BT_HEXDUMP_DBG(out, len, "val"); |
| |
| if (len != read_len) { |
| BT_ERR("Unexpected value length (%zd != %zu)", len, read_len); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int mesh_commit(void) |
| { |
| if (!atomic_test_bit(bt_dev.flags, BT_DEV_ENABLE)) { |
| /* The Bluetooth mesh settings loader calls bt_mesh_start() immediately |
| * after loading the settings. This is not intended to work before |
| * bt_enable(). The doc on @ref bt_enable requires the "bt/" settings |
| * tree to be loaded after @ref bt_enable is completed, so this handler |
| * will be called again later. |
| */ |
| return 0; |
| } |
| |
| if (!bt_mesh_subnet_next(NULL)) { |
| /* Nothing to do since we're not yet provisioned */ |
| return 0; |
| } |
| |
| if (IS_ENABLED(CONFIG_BT_MESH_PB_GATT)) { |
| (void)bt_mesh_pb_gatt_srv_disable(); |
| } |
| |
| bt_mesh_net_settings_commit(); |
| bt_mesh_model_settings_commit(); |
| |
| atomic_set_bit(bt_mesh.flags, BT_MESH_VALID); |
| |
| bt_mesh_start(); |
| |
| return 0; |
| } |
| |
| SETTINGS_STATIC_HANDLER_DEFINE(bt_mesh, "bt/mesh", NULL, NULL, mesh_commit, |
| NULL); |
| |
| /* Pending flags that use K_NO_WAIT as the storage timeout */ |
| #define NO_WAIT_PENDING_BITS (BIT(BT_MESH_SETTINGS_NET_PENDING) | \ |
| BIT(BT_MESH_SETTINGS_IV_PENDING) | \ |
| BIT(BT_MESH_SETTINGS_SEQ_PENDING) | \ |
| BIT(BT_MESH_SETTINGS_CDB_PENDING)) |
| |
| /* Pending flags that use CONFIG_BT_MESH_STORE_TIMEOUT */ |
| #define GENERIC_PENDING_BITS (BIT(BT_MESH_SETTINGS_NET_KEYS_PENDING) | \ |
| BIT(BT_MESH_SETTINGS_APP_KEYS_PENDING) | \ |
| BIT(BT_MESH_SETTINGS_HB_PUB_PENDING) | \ |
| BIT(BT_MESH_SETTINGS_CFG_PENDING) | \ |
| BIT(BT_MESH_SETTINGS_MOD_PENDING) | \ |
| BIT(BT_MESH_SETTINGS_VA_PENDING)) |
| |
| void bt_mesh_settings_store_schedule(enum bt_mesh_settings_flag flag) |
| { |
| uint32_t timeout_ms, remaining_ms; |
| |
| atomic_set_bit(pending_flags, flag); |
| |
| if (atomic_get(pending_flags) & NO_WAIT_PENDING_BITS) { |
| timeout_ms = 0; |
| } else if (IS_ENABLED(CONFIG_BT_MESH_RPL_STORAGE_MODE_SETTINGS) && RPL_STORE_TIMEOUT >= 0 && |
| atomic_test_bit(pending_flags, BT_MESH_SETTINGS_RPL_PENDING) && |
| !(atomic_get(pending_flags) & GENERIC_PENDING_BITS)) { |
| timeout_ms = RPL_STORE_TIMEOUT * MSEC_PER_SEC; |
| } else { |
| timeout_ms = CONFIG_BT_MESH_STORE_TIMEOUT * MSEC_PER_SEC; |
| } |
| |
| remaining_ms = k_ticks_to_ms_floor32(k_work_delayable_remaining_get(&pending_store)); |
| BT_DBG("Waiting %u ms vs rem %u ms", timeout_ms, remaining_ms); |
| |
| /* If the new deadline is sooner, override any existing |
| * deadline; otherwise schedule without changing any existing |
| * deadline. |
| */ |
| if (timeout_ms < remaining_ms) { |
| k_work_reschedule(&pending_store, K_MSEC(timeout_ms)); |
| } else { |
| k_work_schedule(&pending_store, K_MSEC(timeout_ms)); |
| } |
| } |
| |
| void bt_mesh_settings_store_cancel(enum bt_mesh_settings_flag flag) |
| { |
| atomic_clear_bit(pending_flags, flag); |
| } |
| |
| static void store_pending(struct k_work *work) |
| { |
| BT_DBG(""); |
| |
| if (IS_ENABLED(CONFIG_BT_MESH_RPL_STORAGE_MODE_SETTINGS) && |
| atomic_test_and_clear_bit(pending_flags, BT_MESH_SETTINGS_RPL_PENDING)) { |
| bt_mesh_rpl_pending_store(BT_MESH_ADDR_ALL_NODES); |
| } |
| |
| if (atomic_test_and_clear_bit(pending_flags, |
| BT_MESH_SETTINGS_NET_KEYS_PENDING)) { |
| bt_mesh_subnet_pending_store(); |
| } |
| |
| if (atomic_test_and_clear_bit(pending_flags, |
| BT_MESH_SETTINGS_APP_KEYS_PENDING)) { |
| bt_mesh_app_key_pending_store(); |
| } |
| |
| if (atomic_test_and_clear_bit(pending_flags, |
| BT_MESH_SETTINGS_NET_PENDING)) { |
| bt_mesh_net_pending_net_store(); |
| } |
| |
| if (atomic_test_and_clear_bit(pending_flags, |
| BT_MESH_SETTINGS_IV_PENDING)) { |
| bt_mesh_net_pending_iv_store(); |
| } |
| |
| if (atomic_test_and_clear_bit(pending_flags, |
| BT_MESH_SETTINGS_SEQ_PENDING)) { |
| bt_mesh_net_pending_seq_store(); |
| } |
| |
| if (atomic_test_and_clear_bit(pending_flags, |
| BT_MESH_SETTINGS_HB_PUB_PENDING)) { |
| bt_mesh_hb_pub_pending_store(); |
| } |
| |
| if (atomic_test_and_clear_bit(pending_flags, |
| BT_MESH_SETTINGS_CFG_PENDING)) { |
| bt_mesh_cfg_pending_store(); |
| } |
| |
| if (atomic_test_and_clear_bit(pending_flags, |
| BT_MESH_SETTINGS_MOD_PENDING)) { |
| bt_mesh_model_pending_store(); |
| } |
| |
| if (atomic_test_and_clear_bit(pending_flags, |
| BT_MESH_SETTINGS_VA_PENDING)) { |
| bt_mesh_va_pending_store(); |
| } |
| |
| if (IS_ENABLED(CONFIG_BT_MESH_CDB) && |
| atomic_test_and_clear_bit(pending_flags, |
| BT_MESH_SETTINGS_CDB_PENDING)) { |
| bt_mesh_cdb_pending_store(); |
| } |
| } |
| |
| void bt_mesh_settings_init(void) |
| { |
| k_work_init_delayable(&pending_store, store_pending); |
| } |
| |
| void bt_mesh_settings_store_pending(void) |
| { |
| (void)k_work_cancel_delayable(&pending_store); |
| |
| store_pending(&pending_store.work); |
| } |