| Zephyr Kernel 1.6.0 Release Notes |
| ################################# |
| |
| [Content: create executive summary] |
| |
| Major enhancements included with the release: |
| |
| * Introduced the Unified Kernel; the nano and micro kernel were removed. |
| * The legacy API is still supported but deprecated. All legacy tests were moved to tests/legacy. |
| * Added Unified Kernel documentation. |
| * Added support for ARM LTD Beetle SoC and V2M Beetle board. |
| * Added support for USB mass storage access to the internal filesystem. |
| |
| A detailed list of changes since v1.5.0 by component follows: |
| |
| Kernel |
| ****** |
| |
| * Introduced Unified kernel. |
| * Removed deprecated Tasks IRQs. |
| * Removed deprecated dynamic interrupt API. |
| * Added DLIST to operate in all elements of a doubly-linked list. |
| * SLIST: Added sys_slist_get() to fetch and remove the head, also Added append_list and merge_slist. |
| * Added nano_work_pending to check if it is pending execution. |
| * Unified: Added support for k_malloc and k_free. |
| * Renamed kernel objects event to alert and memory map to memory slab. |
| * Changed memory pool, memory maps, message queues and event handling APIs. |
| |
| Architectures |
| ************* |
| |
| * ARC: Removed CONFIG_TIMER0_CLOCK_FREQ. |
| * ARC: Unified linker scripts. |
| * ARC: Removed dynamic interrupts. |
| * ARM: Added choice to use floating point ABI. |
| * ARM: Added NXP Kinetis kconfig options to configure clocks. |
| * ARM: Removed dynamic interrupts and exceptions. |
| * ARM: Atmel: Added constants and structures for watchdog registers. |
| * ARM: Added support for ARM Cortex-M0/M0+. |
| * x86: Removed dynamic interrupts and exceptions. |
| * x86: Declared internal API for interrupt controllers. |
| * x86: Changed IRQ controller to return -1 if cannot determine source vector. |
| * x86: Grouped Quark SoC's under intel_quark family. |
| * x86: Optimized and simplified IRQ and exception stubs. |
| |
| Boards |
| ****** |
| |
| * Renamed board Quark SE devboard to Quark SE C1000 devboard. |
| * Renamed board Quark SE SSS devboard to Quark SE C1000 SS devboard. |
| * Quark SE C1000: Disabled IPM and enabled UART0 on the Sensor SubSytem. |
| * Removed basic_cortex_m3 and basic_minuteia boards. |
| * Arduino 101: Removed backup/restore scripts. To restore original bootloader |
| use flashpack utility instead. |
| * Renamed nRF52 Nitrogen to 96Boards Nitrogen. |
| * Added ARM LTD Beetle SoC and V2M Beetle board. |
| * Added Texas Instruments CC3200 LaunchXL support. |
| * Added support for Nordic Semiconductor nRF51822. |
| * Added support for NXP Hexiwear board. |
| |
| Drivers and Sensors |
| ******************* |
| |
| * SPI: Fixed typos in SPI port numbers. |
| * Pinmux: Removed Quark dev unused file. |
| * I2C: Added KSDK shim driver. |
| * Ethernet: Added KSDK shim driver. |
| * I2C: Changed config parameters to SoC specific. |
| * QMSI: Implemented suspend and resume functions in WDT, I2C, SPI and AONPT. |
| * Added HP206C sensor. |
| * Changed config_info pointers to const. |
| * Added support for SoCWatch driver. |
| * Added FXOS8700 accelerometer / magnetometer sensor driver. |
| |
| Networking |
| ********** |
| |
| * [Content: component changes] |
| |
| Bluetooth |
| ********* |
| |
| * Added native Bluetooth Controller support. Currently nRF51 & nRF52 are supported. |
| * New location for Controller & Host implementations: subsys/bluetooth/ |
| * Added raw HCI API to enable physical HCI transport for a Controller-only build. |
| * Added sample raw HCI apps for USB and UART. |
| * Added cross-transport pairing support for the Security Manager Protocol. |
| * Added RFCOMM support (for Bluetooth Classic) |
| * Added basic persistent storage support (filesystem-backed) |
| * Renamed bt_driver API to bt_hci_driver, in anticipation of Bluetooth radio drivers. |
| |
| Build Infrastructure |
| ******************** |
| |
| * Makefile: Changed outdir into board-specific directory to avoid build collisions. |
| * Makefile: Changed to use HOST_OS environment variable. |
| * Makefile: Added support for third party build systems. |
| * printk: Added support for modifiers. |
| * Sanity: Added support to filter using environment variables. |
| * Sanity: Added support for multiple toolchains. |
| * Sanity: Added ISSM and ARM GCC embedded toolchains to the supported toolchains. |
| * Sanity: Added extra arguments to be passed to the build. |
| * Sanity: Removed linker VMA/LMA offset check. |
| * Sysgen: Added --kernel_type argument. |
| * Modified build infrastructure to support unified kernel. |
| * SDK: Zephyr: Added check for minimum required version. |
| * Imported get_maintainer.pl from Linux kernel. |
| |
| Libraries |
| ********* |
| |
| * libc: Added subset of standard types in inttypes.h. |
| * libc: Added support for 'z' length specifier. |
| * libc: Removed stddef.h which is provided by the compiler. |
| * libc: printf: Improved code for printing. |
| * Added CoAP implementation for Zephyr. |
| * File system: Added API to grow or shrink a file. |
| * File system: Added API to get volume statistics. |
| * File system: Added API to flush cache of an opened file. |
| |
| HALs |
| **** |
| |
| * QMSI: Updated to version 1.3. |
| * HAL: Imported CC3200 SDK. |
| * Imported Nordic MDK nRF51 files. |
| * Imported Kinetis SDK Ethernet phy driver. |
| * Imported SDK RNGA driver. |
| |
| Documentation |
| ************* |
| |
| * Drivers: Improved Zephyr Driver model. |
| * Updated device power management API. |
| * Unified Kernel primer. |
| * Moved supported board information to the wiki.zephyrproject.org site. |
| * Revised documentation for Kernel Event logger and Timing. |
| |
| Test and Samples |
| **************** |
| |
| * Fixed incorrect printk usage. |
| * Removed test for dynamic exceptions. |
| * Added USB sample. |
| * Added tests and samples for CoAP client and server. |
| * Added philosophers unified sample. |
| * Removed printf/printk wrappers. |
| * Added Unified kernel API samples. |
| * Imported tinycrypt test cases for CTR, ECC DSA and ECC DH algorithm. |
| |
| Deprecations |
| ************ |
| |
| * Deprecated microkernel and nanokernel APIs. |
| * Removed dynamic IRQs and exceptions. |
| * Removed Tasks IRQs. |
| |
| JIRA Related Items |
| ****************** |
| |
| Epic |
| ==== |
| |
| * [ZEP-308] - Build System cleanup and Kernel / Application build separation |
| * [ZEP-334] - Unified Kernel |
| * [ZEP-760] - Clean up samples and sanitise them. |
| * [ZEP-766] - USB Mass Storage access to internal filesystem |
| * [ZEP-1090] - CPU x86 save/restore using new QMSI bootloader flow |
| |
| Story |
| ===== |
| |
| * [ZEP-48] - define API for interrupt controllers |
| * [ZEP-233] - Support USB mass storage device class |
| * [ZEP-237] - Support pre-built host tools |
| * [ZEP-240] - printk/printf usage in samples |
| * [ZEP-248] - Add a BOARD/SOC porting guide |
| * [ZEP-328] - HW Encryption Abstraction |
| * [ZEP-342] - USB DFU |
| * [ZEP-451] - Quark SE output by default redirected to IPM |
| * [ZEP-521] - ARM - add choice to floating point ABI selection |
| * [ZEP-546] - UART interrupts not triggered on ARC |
| * [ZEP-584] - warn user if SDK is out of date |
| * [ZEP-614] - Port tinycrypt 2.0 test cases to Zephyr |
| * [ZEP-622] - Add FS API to truncate/shrink a file |
| * [ZEP-627] - Port Trickle support from Contiki into current stack |
| * [ZEP-635] - Add FS API to grow a file |
| * [ZEP-636] - Add FS API to get volume total and free space |
| * [ZEP-640] - Remove dynamic IRQs/exceptions from Zephyr |
| * [ZEP-653] - QMSI shim driver: Watchdog: Implement suspend and resume callbacks |
| * [ZEP-654] - QMSI shim driver: I2C: Implement suspend and resume callbacks |
| * [ZEP-657] - QMSI shim driver: AONPT: Implement suspend and resume callbacks |
| * [ZEP-661] - QMSI shim driver: SPI: Implement suspend and resume callbacks |
| * [ZEP-688] - unify duplicated sections of arch linker scripts |
| * [ZEP-715] - Add K64F clock configurations |
| * [ZEP-716] - Add Hexiwear board support |
| * [ZEP-717] - Add ksdk I2C shim driver |
| * [ZEP-718] - Add ksdk ethernet shim driver |
| * [ZEP-721] - Add FXOS8700 accelerometer/magnetometer sensor driver |
| * [ZEP-737] - Update host tools from upstream: fixdep.c |
| * [ZEP-745] - Revisit design of PWM Driver API |
| * [ZEP-750] - Arduino 101 board should support one configuration using original bootloader |
| * [ZEP-758] - Rename Quark SE Devboard to its official name: Quark SE C1000 |
| * [ZEP-767] - Add FS API to flush cache of an open file |
| * [ZEP-775] - Enable USB CDC by default on Arduino 101 and redirect serial to USB |
| * [ZEP-783] - ARM Cortex-M0/M0+ support |
| * [ZEP-784] - Add support for Nordic Semiconductor nRF51822 SoC |
| * [ZEP-850] - remove obsolete boards basic_minuteia and basic_cortex_m3 |
| * [ZEP-906] - [unified] Add scheduler time slicing support |
| * [ZEP-907] - Test memory pool support (with mailboxes) |
| * [ZEP-908] - Add task offload to fiber support |
| * [ZEP-909] - Adapt tickless idle + power management for ARM |
| * [ZEP-910] - Adapt tickless idle for x86 |
| * [ZEP-911] - Refine thread priorities & locking |
| * [ZEP-912] - Finish renaming kernel object types |
| * [ZEP-916] - Eliminate kernel object API anomalies |
| * [ZEP-920] - Investigate malloc/free support |
| * [ZEP-921] - Miscellaneous documentation work |
| * [ZEP-922] - Revise documentation for Kernel Event Logger |
| * [ZEP-923] - Revise documentation for Timing |
| * [ZEP-924] - Revise documentation for Interrupts |
| * [ZEP-925] - API changes to message queues |
| * [ZEP-926] - API changes to memory pools |
| * [ZEP-927] - API changes to memory maps |
| * [ZEP-928] - API changes to event handling |
| * [ZEP-930] - Cutover to unified kernel |
| * [ZEP-933] - Unified kernel ARC port |
| * [ZEP-934] - NIOS_II port |
| * [ZEP-935] - Kernel logger support (validation) |
| * [ZEP-954] - Update device PM API to allow setting additional power states |
| * [ZEP-957] - Create example sample for new unified kernel API usage |
| * [ZEP-959] - sync checkpatch.pl with upstream Linux |
| * [ZEP-981] - Add doxygen documentation to both include/kernel.h and include/legacy.h |
| * [ZEP-989] - Cache next ready thread instead of finding out the long way |
| * [ZEP-993] - Quark SE (x86): Refactor save/restore execution context feature |
| * [ZEP-994] - Quark SE (ARC): Add PMA sample |
| * [ZEP-996] - Refactor save/restore feature from i2c_qmsi driver |
| * [ZEP-997] - Refactor save/restore feature from spi_qmsi driver |
| * [ZEP-998] - Refactor save/restore feature from uart_qmsi driver |
| * [ZEP-999] - Refactor save/restore feature from gpio_qmsi driver |
| * [ZEP-1000] - Refactor save/restore feature from rtc_qmsi driver |
| * [ZEP-1001] - Refactor save/restore feature from wdt_qmsi driver |
| * [ZEP-1002] - Refactor save/restore feature from counter_qmsi_aonpt driver |
| * [ZEP-1004] - Extend counter_qmsi_aon driver to support save/restore peripheral context |
| * [ZEP-1005] - Extend dma_qmsi driver to support save/restore peripheral context |
| * [ZEP-1006] - Extend soc_flash_qmsi driver to support save/restore peripheral context |
| * [ZEP-1008] - Extend pwm_qmsi driver to support save/restore peripheral context |
| * [ZEP-1030] - Enable QMSI shim drivers of SoC peripherals on the sensor subsystem |
| * [ZEP-1045] - Add/Enhance shim layer to wrap SOC specific PM implementations |
| * [ZEP-1046] - Implement RAM sharing between bootloader and Zephyr |
| * [ZEP-1047] - Adapt to new PM related boot flow changes in QMSI boot loader |
| * [ZEP-1106] - Fix all test failures from TCF |
| * [ZEP-1107] - Update QMSI to 1.3 |
| * [ZEP-1109] - Texas Instruments CC3200 LaunchXL Support |
| * [ZEP-1119] - move top level usb/ to sys/usb |
| * [ZEP-1120] - move top level fs/ to sys/fs |
| * [ZEP-1121] - Add config support for enabling SoCWatch in Zephyr |
| * [ZEP-1188] - Add an API to retrieve pending interrupts for wake events |
| * [ZEP-1191] - Create wiki page for Hexiwear board |
| * [ZEP-1245] - ARM LTD V2M Beetle Support |
| * [ZEP-1313] - porting and user guides must include a security section |
| |
| Task |
| ==== |
| |
| * [ZEP-592] - Sanitycheck support for multiple toolchains |
| * [ZEP-740] - PWM API: Check if 'flags' argument is really required |
| |
| Bug |
| === |
| |
| * [ZEP-145] - no 'make flash' for Arduino Due |
| * [ZEP-199] - Zephyr driver model is undocumented |
| * [ZEP-471] - Ethernet packet with multicast address is not working |
| * [ZEP-472] - Ethernet packets are getting missed if sent in quick succession. |
| * [ZEP-517] - build on windows failed "zephyr/Makefile:869: *** multiple target patterns" |
| * [ZEP-528] - ARC has 2 almost identical copies of the linker script |
| * [ZEP-577] - Sample application source does not compile on Windows |
| * [ZEP-601] - enable CONFIG_DEBUG_INFO |
| * [ZEP-602] - unhandled CPU exceptions/interrupts report wrong faulting vector if triggered by CPU |
| * [ZEP-615] - Un-supported flash erase size listed in SPI flash w25qxxdv driver header file |
| * [ZEP-639] - device_pm_ops structure should be defined as static |
| * [ZEP-686] - docs: Info in "Application Development Primer" and "Developing an Application and the Build System" is largely duplicated |
| * [ZEP-698] - samples/task_profiler issues |
| * [ZEP-707] - mem_safe test stomps on top of .data and bottom of .noinit |
| * [ZEP-724] - build on windows failed: 'make: execvp: uname: File or path name too long' |
| * [ZEP-733] - Minimal libc shouldn't be providing stddef.h |
| * [ZEP-762] - unexpected "abspath" and "notdir" from mingw make system |
| * [ZEP-777] - samples/driver/i2c_stts751: kconfig build warning from "select DMA_QMSI" |
| * [ZEP-778] - Samples/drivers/i2c_lsm9ds0: kconfig build warning from "select DMA_QMSI" |
| * [ZEP-779] - Using current MinGW gcc version 5.3.0 breaks Zephyr build on Windows |
| * [ZEP-905] - hello_world compilation for arduino_due target fails when using CROSS_COMPILE |
| * [ZEP-950] - USB: Device is not listed by USB20CV test suite |
| * [ZEP-961] - samples: other cases cannot execute after run aon_counter case |
| * [ZEP-1025] - Unified kernel build sometimes breaks on a missing .d dependency file. |
| * [ZEP-1027] - Doccumentation for GCC ARM is not accurate |
| * [ZEP-1048] - grove_lcd sample: sample does not work if you disable serial |
| * [ZEP-1100] - Current master still identifies itself as 1.5.0 |
| * [ZEP-1101] - SYS_KERNEL_VER_PATCHLEVEL() and friends artificially limit version numbers to 4 bits |
| * [ZEP-1130] - region `RAM' overflowed occurs while building test_hmac_prng |
| * [ZEP-1141] - Tinycrypt SHA256 test fails with system crash using unified kernel type |
| * [ZEP-1144] - Tinycrypt AES128 fixed-key with variable-text test fails using unified kernel type |
| * [ZEP-1145] - system hang after tinycrypt HMAC test |
| * [ZEP-1146] - zephyrproject.org home page needs technical scrub for 1.6 release |
| * [ZEP-1149] - port ztest framework to unified kernel |
| * [ZEP-1155] - Fix filesystem API namespace |
| * [ZEP-1163] - LIB_INCLUDE_DIR is clobbered in Makefile second pass |
| * [ZEP-1164] - ztest skip waiting the test case to finish its execution |
| * [ZEP-1179] - Build issues when compiling with LLVM from ISSM (icx) |
| * [ZEP-1226] - cortex M7 port assembler error |
| * [ZEP-1287] - ARC SPI 1 Port is not working |
| * [ZEP-1297] - test/legacy/kernel/test_mail: failure on ARC platforms |
| * [ZEP-1299] - System can't resume completely with DMA suspend and resume operation |
| * [ZEP-1303] - Configuration talks about >32 thread prios, but the kernel does not support it |
| * [ZEP-1309] - ARM uses the end of memory for its init stack |
| * [ZEP-1310] - ARC uses the end of memory for its init stack |
| * [ZEP-1319] - Zephyr is unable to compile when CONFIG_RUNTIME_NMI is enabled on ARM platforms |
