|  | /* | 
|  | * Copyright (c) 2019 Intel Corporation | 
|  | * | 
|  | * SPDX-License-Identifier: Apache-2.0 | 
|  | */ | 
|  |  | 
|  | /** | 
|  | * @file | 
|  | * | 
|  | * PPP driver using uart_pipe. This is meant for network connectivity between | 
|  | * two network end points. | 
|  | */ | 
|  |  | 
|  | #define LOG_LEVEL CONFIG_NET_PPP_LOG_LEVEL | 
|  | #include <zephyr/logging/log.h> | 
|  | LOG_MODULE_REGISTER(net_ppp, LOG_LEVEL); | 
|  |  | 
|  | #include <stdio.h> | 
|  |  | 
|  | #include <zephyr/kernel.h> | 
|  |  | 
|  | #include <stdbool.h> | 
|  | #include <errno.h> | 
|  | #include <stddef.h> | 
|  | #include <zephyr/net/ppp.h> | 
|  | #include <zephyr/net_buf.h> | 
|  | #include <zephyr/net/net_pkt.h> | 
|  | #include <zephyr/net/net_if.h> | 
|  | #include <zephyr/net/net_core.h> | 
|  | #include <zephyr/sys/ring_buffer.h> | 
|  | #include <zephyr/sys/crc.h> | 
|  | #include <zephyr/drivers/uart.h> | 
|  | #include <zephyr/random/random.h> | 
|  | #include <zephyr/posix/net/if_arp.h> | 
|  | #include <zephyr/net/ethernet.h> | 
|  | #include <zephyr/net/capture.h> | 
|  |  | 
|  | #include "../../subsys/net/ip/net_stats.h" | 
|  | #include "../../subsys/net/ip/net_private.h" | 
|  |  | 
|  | #define UART_BUF_LEN CONFIG_NET_PPP_UART_BUF_LEN | 
|  | #define UART_TX_BUF_LEN CONFIG_NET_PPP_ASYNC_UART_TX_BUF_LEN | 
|  |  | 
|  | enum ppp_driver_state { | 
|  | STATE_HDLC_FRAME_START, | 
|  | STATE_HDLC_FRAME_ADDRESS, | 
|  | STATE_HDLC_FRAME_DATA, | 
|  | }; | 
|  |  | 
|  | #define PPP_WORKQ_PRIORITY CONFIG_NET_PPP_RX_PRIORITY | 
|  | #define PPP_WORKQ_STACK_SIZE CONFIG_NET_PPP_RX_STACK_SIZE | 
|  |  | 
|  | K_KERNEL_STACK_DEFINE(ppp_workq, PPP_WORKQ_STACK_SIZE); | 
|  |  | 
|  | #if defined(CONFIG_NET_PPP_CAPTURE) | 
|  | #define MAX_CAPTURE_BUF_LEN CONFIG_NET_PPP_CAPTURE_BUF_SIZE | 
|  | #else | 
|  | #define MAX_CAPTURE_BUF_LEN 1 | 
|  | #endif | 
|  |  | 
|  | struct net_ppp_capture_ctx { | 
|  | struct net_capture_cooked cooked; | 
|  | uint8_t capture_buf[MAX_CAPTURE_BUF_LEN]; | 
|  | }; | 
|  |  | 
|  | #if defined(CONFIG_NET_PPP_CAPTURE) | 
|  | static struct net_ppp_capture_ctx _ppp_capture_ctx; | 
|  | static struct net_ppp_capture_ctx *ppp_capture_ctx = &_ppp_capture_ctx; | 
|  | #else | 
|  | static struct net_ppp_capture_ctx *ppp_capture_ctx; | 
|  | #endif | 
|  |  | 
|  | struct ppp_driver_context { | 
|  | const struct device *dev; | 
|  | struct net_if *iface; | 
|  |  | 
|  | /* This net_pkt contains pkt that is being read */ | 
|  | struct net_pkt *pkt; | 
|  |  | 
|  | /* How much free space we have in the net_pkt */ | 
|  | size_t available; | 
|  |  | 
|  | /* ppp data is read into this buf */ | 
|  | uint8_t buf[UART_BUF_LEN]; | 
|  | #if defined(CONFIG_NET_PPP_ASYNC_UART) | 
|  | /* with async we use 2 rx buffers */ | 
|  | uint8_t buf2[UART_BUF_LEN]; | 
|  | struct k_work_delayable uart_recovery_work; | 
|  |  | 
|  | /* ppp buf use when sending data */ | 
|  | uint8_t send_buf[UART_TX_BUF_LEN]; | 
|  | #else | 
|  | /* ppp buf use when sending data */ | 
|  | uint8_t send_buf[UART_BUF_LEN]; | 
|  | #endif | 
|  |  | 
|  | uint8_t mac_addr[6]; | 
|  | struct net_linkaddr ll_addr; | 
|  |  | 
|  | /* Flag that tells whether this instance is initialized or not */ | 
|  | atomic_t modem_init_done; | 
|  |  | 
|  | /* Incoming data is routed via ring buffer */ | 
|  | struct ring_buf rx_ringbuf; | 
|  | uint8_t rx_buf[CONFIG_NET_PPP_RINGBUF_SIZE]; | 
|  |  | 
|  | /* ISR function callback worker */ | 
|  | struct k_work cb_work; | 
|  | struct k_work_q cb_workq; | 
|  |  | 
|  | #if defined(CONFIG_NET_STATISTICS_PPP) | 
|  | struct net_stats_ppp stats; | 
|  | #endif | 
|  | enum ppp_driver_state state; | 
|  |  | 
|  | #if defined(CONFIG_PPP_CLIENT_CLIENTSERVER) | 
|  | /* correctly received CLIENT bytes */ | 
|  | uint8_t client_index; | 
|  | #endif | 
|  |  | 
|  | uint8_t init_done : 1; | 
|  | uint8_t next_escaped : 1; | 
|  | }; | 
|  |  | 
|  | static struct ppp_driver_context ppp_driver_context_data; | 
|  |  | 
|  | #if defined(CONFIG_NET_PPP_ASYNC_UART) | 
|  | static bool rx_retry_pending; | 
|  | static bool uart_recovery_pending; | 
|  | static uint8_t *next_buf; | 
|  |  | 
|  | static K_SEM_DEFINE(uarte_tx_finished, 0, 1); | 
|  |  | 
|  | static void uart_callback(const struct device *dev, | 
|  | struct uart_event *evt, | 
|  | void *user_data) | 
|  | { | 
|  | struct ppp_driver_context *context = user_data; | 
|  | uint8_t *p; | 
|  | int err, ret, len, space_left; | 
|  |  | 
|  | switch (evt->type) { | 
|  | case UART_TX_DONE: | 
|  | LOG_DBG("UART_TX_DONE: sent %zu bytes", evt->data.tx.len); | 
|  | k_sem_give(&uarte_tx_finished); | 
|  | break; | 
|  |  | 
|  | case UART_TX_ABORTED: | 
|  | { | 
|  | k_sem_give(&uarte_tx_finished); | 
|  | if (CONFIG_NET_PPP_ASYNC_UART_TX_TIMEOUT == 0) { | 
|  | LOG_WRN("UART TX aborted."); | 
|  | break; | 
|  | } | 
|  | struct uart_config uart_conf; | 
|  |  | 
|  | err = uart_config_get(dev, &uart_conf); | 
|  | if (err) { | 
|  | LOG_ERR("uart_config_get() err: %d", err); | 
|  | } else if (uart_conf.baudrate / 10 * CONFIG_NET_PPP_ASYNC_UART_TX_TIMEOUT | 
|  | / MSEC_PER_SEC > evt->data.tx.len * 2) { | 
|  | /* The abort likely did not happen because of missing bandwidth. */ | 
|  | LOG_DBG("UART_TX_ABORTED"); | 
|  | } else { | 
|  | LOG_WRN("UART TX aborted: Only %zu bytes were sent. You may want" | 
|  | " to change either CONFIG_NET_PPP_ASYNC_UART_TX_TIMEOUT" | 
|  | " (%d ms) or the UART baud rate (%u).", evt->data.tx.len, | 
|  | CONFIG_NET_PPP_ASYNC_UART_TX_TIMEOUT, uart_conf.baudrate); | 
|  | } | 
|  | break; | 
|  | } | 
|  |  | 
|  | case UART_RX_RDY: | 
|  | len = evt->data.rx.len; | 
|  | p = evt->data.rx.buf + evt->data.rx.offset; | 
|  |  | 
|  | LOG_DBG("Received data %d bytes", len); | 
|  |  | 
|  | ret = ring_buf_put(&context->rx_ringbuf, p, len); | 
|  | if (ret < evt->data.rx.len) { | 
|  | LOG_WRN("Rx buffer doesn't have enough space. " | 
|  | "Bytes pending: %d, written only: %d. " | 
|  | "Disabling RX for now.", | 
|  | evt->data.rx.len, ret); | 
|  |  | 
|  | /* No possibility to set flow ctrl ON towards PC, | 
|  | * thus workrounding this lack in async API by turning | 
|  | * rx off for now and re-enabling that later. | 
|  | */ | 
|  | if (!rx_retry_pending) { | 
|  | uart_rx_disable(dev); | 
|  | rx_retry_pending = true; | 
|  | } | 
|  | } | 
|  |  | 
|  | space_left = ring_buf_space_get(&context->rx_ringbuf); | 
|  | if (!rx_retry_pending && space_left < (sizeof(context->rx_buf) / 8)) { | 
|  | /* Not much room left in buffer after a write to ring buffer. | 
|  | * We submit a work, but enable flow ctrl also | 
|  | * in this case to avoid packet losses. | 
|  | */ | 
|  | uart_rx_disable(dev); | 
|  | rx_retry_pending = true; | 
|  | LOG_WRN("%d written to RX buf, but after that only %d space left. " | 
|  | "Disabling RX for now.", | 
|  | ret, space_left); | 
|  | } | 
|  |  | 
|  | k_work_submit_to_queue(&context->cb_workq, &context->cb_work); | 
|  | break; | 
|  |  | 
|  | case UART_RX_BUF_REQUEST: | 
|  | { | 
|  | LOG_DBG("UART_RX_BUF_REQUEST: buf %p", (void *)next_buf); | 
|  |  | 
|  | if (next_buf) { | 
|  | err = uart_rx_buf_rsp(dev, next_buf, sizeof(context->buf)); | 
|  | if (err) { | 
|  | LOG_ERR("uart_rx_buf_rsp() err: %d", err); | 
|  | } | 
|  | } | 
|  |  | 
|  | break; | 
|  | } | 
|  |  | 
|  | case UART_RX_BUF_RELEASED: | 
|  | next_buf = evt->data.rx_buf.buf; | 
|  | LOG_DBG("UART_RX_BUF_RELEASED: buf %p", (void *)next_buf); | 
|  | break; | 
|  |  | 
|  | case UART_RX_DISABLED: | 
|  | LOG_DBG("UART_RX_DISABLED - re-enabling in a while"); | 
|  |  | 
|  | if (rx_retry_pending && !uart_recovery_pending) { | 
|  | k_work_schedule(&context->uart_recovery_work, | 
|  | K_MSEC(CONFIG_NET_PPP_ASYNC_UART_RX_RECOVERY_TIMEOUT)); | 
|  | rx_retry_pending = false; | 
|  | uart_recovery_pending = true; | 
|  | } | 
|  | break; | 
|  |  | 
|  | case UART_RX_STOPPED: | 
|  | LOG_DBG("UART_RX_STOPPED: stop reason %d", evt->data.rx_stop.reason); | 
|  |  | 
|  | if (evt->data.rx_stop.reason != 0) { | 
|  | rx_retry_pending = true; | 
|  | } | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int ppp_async_uart_rx_enable(struct ppp_driver_context *context) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | next_buf = context->buf2; | 
|  | err = uart_callback_set(context->dev, uart_callback, (void *)context); | 
|  | if (err) { | 
|  | LOG_ERR("Failed to set uart callback, err %d", err); | 
|  | } | 
|  |  | 
|  | err = uart_rx_enable(context->dev, context->buf, sizeof(context->buf), | 
|  | CONFIG_NET_PPP_ASYNC_UART_RX_ENABLE_TIMEOUT * USEC_PER_MSEC); | 
|  | if (err) { | 
|  | LOG_ERR("uart_rx_enable() failed, err %d", err); | 
|  | } else { | 
|  | LOG_DBG("RX enabled"); | 
|  | } | 
|  | rx_retry_pending = false; | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void uart_recovery(struct k_work *work) | 
|  | { | 
|  | struct k_work_delayable *dwork = k_work_delayable_from_work(work); | 
|  | struct ppp_driver_context *ppp = | 
|  | CONTAINER_OF(dwork, struct ppp_driver_context, uart_recovery_work); | 
|  | int ret; | 
|  |  | 
|  | ret = ring_buf_space_get(&ppp->rx_ringbuf); | 
|  | if (ret >= (sizeof(ppp->rx_buf) / 2)) { | 
|  | ret = ppp_async_uart_rx_enable(ppp); | 
|  | if (ret) { | 
|  | LOG_ERR("ppp_async_uart_rx_enable() failed, err %d", ret); | 
|  | } else { | 
|  | LOG_DBG("UART RX recovered."); | 
|  | } | 
|  | uart_recovery_pending = false; | 
|  | } else { | 
|  | LOG_ERR("Rx buffer still doesn't have enough room %d to be re-enabled", ret); | 
|  | k_work_schedule(&ppp->uart_recovery_work, | 
|  | K_MSEC(CONFIG_NET_PPP_ASYNC_UART_RX_RECOVERY_TIMEOUT)); | 
|  | } | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static int ppp_save_byte(struct ppp_driver_context *ppp, uint8_t byte) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | if (!ppp->pkt) { | 
|  | ppp->pkt = net_pkt_rx_alloc_with_buffer( | 
|  | ppp->iface, | 
|  | CONFIG_NET_BUF_DATA_SIZE, | 
|  | AF_UNSPEC, 0, K_NO_WAIT); | 
|  | if (!ppp->pkt) { | 
|  | LOG_ERR("[%p] cannot allocate pkt", ppp); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | net_pkt_cursor_init(ppp->pkt); | 
|  |  | 
|  | ppp->available = net_pkt_available_buffer(ppp->pkt); | 
|  | } | 
|  |  | 
|  | /* Extra debugging can be enabled separately if really | 
|  | * needed. Normally it would just print too much data. | 
|  | */ | 
|  | if (0) { | 
|  | LOG_DBG("Saving byte %02x", byte); | 
|  | } | 
|  |  | 
|  | /* This is not very intuitive but we must allocate new buffer | 
|  | * before we write a byte to last available cursor position. | 
|  | */ | 
|  | if (ppp->available == 1) { | 
|  | ret = net_pkt_alloc_buffer(ppp->pkt, | 
|  | CONFIG_NET_BUF_DATA_SIZE + ppp->available, | 
|  | AF_UNSPEC, K_NO_WAIT); | 
|  | if (ret < 0) { | 
|  | LOG_ERR("[%p] cannot allocate new data buffer", ppp); | 
|  | goto out_of_mem; | 
|  | } | 
|  |  | 
|  | ppp->available = net_pkt_available_buffer(ppp->pkt); | 
|  | } | 
|  |  | 
|  | if (ppp->available) { | 
|  | ret = net_pkt_write_u8(ppp->pkt, byte); | 
|  | if (ret < 0) { | 
|  | LOG_ERR("[%p] Cannot write to pkt %p (%d)", | 
|  | ppp, ppp->pkt, ret); | 
|  | goto out_of_mem; | 
|  | } | 
|  |  | 
|  | ppp->available--; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | out_of_mem: | 
|  | net_pkt_unref(ppp->pkt); | 
|  | ppp->pkt = NULL; | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | static const char *ppp_driver_state_str(enum ppp_driver_state state) | 
|  | { | 
|  | #if (CONFIG_NET_PPP_LOG_LEVEL >= LOG_LEVEL_DBG) | 
|  | switch (state) { | 
|  | case STATE_HDLC_FRAME_START: | 
|  | return "START"; | 
|  | case STATE_HDLC_FRAME_ADDRESS: | 
|  | return "ADDRESS"; | 
|  | case STATE_HDLC_FRAME_DATA: | 
|  | return "DATA"; | 
|  | } | 
|  | #else | 
|  | ARG_UNUSED(state); | 
|  | #endif | 
|  |  | 
|  | return ""; | 
|  | } | 
|  |  | 
|  | static void ppp_change_state(struct ppp_driver_context *ctx, | 
|  | enum ppp_driver_state new_state) | 
|  | { | 
|  | NET_ASSERT(ctx); | 
|  |  | 
|  | if (ctx->state == new_state) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | NET_ASSERT(new_state >= STATE_HDLC_FRAME_START && | 
|  | new_state <= STATE_HDLC_FRAME_DATA); | 
|  |  | 
|  | NET_DBG("[%p] state %s (%d) => %s (%d)", | 
|  | ctx, ppp_driver_state_str(ctx->state), ctx->state, | 
|  | ppp_driver_state_str(new_state), new_state); | 
|  |  | 
|  | ctx->state = new_state; | 
|  | } | 
|  |  | 
|  | static int ppp_send_flush(struct ppp_driver_context *ppp, int off) | 
|  | { | 
|  | if (IS_ENABLED(CONFIG_NET_TEST)) { | 
|  | return 0; | 
|  | } | 
|  | uint8_t *buf = ppp->send_buf; | 
|  |  | 
|  | if (IS_ENABLED(CONFIG_NET_PPP_CAPTURE) && | 
|  | net_capture_is_enabled(NULL) && ppp_capture_ctx) { | 
|  | size_t len = off; | 
|  | uint8_t *start = &buf[0]; | 
|  |  | 
|  | /* Do not capture HDLC frame start and stop bytes (0x7e) */ | 
|  |  | 
|  | if (buf[0] == 0x7e) { | 
|  | len--; | 
|  | start++; | 
|  | } | 
|  |  | 
|  | if (buf[off] == 0x7e) { | 
|  | len--; | 
|  | } | 
|  |  | 
|  | net_capture_data(&ppp_capture_ctx->cooked, | 
|  | start, len, | 
|  | NET_CAPTURE_OUTGOING, | 
|  | NET_ETH_PTYPE_HDLC); | 
|  | } | 
|  |  | 
|  | #if defined(CONFIG_NET_PPP_ASYNC_UART) | 
|  | int ret; | 
|  | const int32_t timeout = CONFIG_NET_PPP_ASYNC_UART_TX_TIMEOUT | 
|  | ? CONFIG_NET_PPP_ASYNC_UART_TX_TIMEOUT * USEC_PER_MSEC | 
|  | : SYS_FOREVER_US; | 
|  |  | 
|  | k_sem_take(&uarte_tx_finished, K_FOREVER); | 
|  |  | 
|  | ret = uart_tx(ppp->dev, buf, off, timeout); | 
|  | if (ret) { | 
|  | LOG_ERR("uart_tx() failed, err %d", ret); | 
|  | k_sem_give(&uarte_tx_finished); | 
|  | } | 
|  | #else | 
|  | while (off--) { | 
|  | uart_poll_out(ppp->dev, *buf++); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ppp_send_bytes(struct ppp_driver_context *ppp, | 
|  | const uint8_t *data, int len, int off) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < len; i++) { | 
|  | ppp->send_buf[off++] = data[i]; | 
|  |  | 
|  | if (off >= sizeof(ppp->send_buf)) { | 
|  | off = ppp_send_flush(ppp, off); | 
|  | } | 
|  | } | 
|  |  | 
|  | return off; | 
|  | } | 
|  |  | 
|  | #if defined(CONFIG_PPP_CLIENT_CLIENTSERVER) | 
|  |  | 
|  | #define CLIENT "CLIENT" | 
|  | #define CLIENTSERVER "CLIENTSERVER" | 
|  |  | 
|  | static void ppp_handle_client(struct ppp_driver_context *ppp, uint8_t byte) | 
|  | { | 
|  | static const char *client = CLIENT; | 
|  | static const char *clientserver = CLIENTSERVER; | 
|  | int offset; | 
|  |  | 
|  | if (ppp->client_index >= (sizeof(CLIENT) - 1)) { | 
|  | ppp->client_index = 0; | 
|  | } | 
|  |  | 
|  | if (byte != client[ppp->client_index]) { | 
|  | ppp->client_index = 0; | 
|  | if (byte != client[ppp->client_index]) { | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | ++ppp->client_index; | 
|  | if (ppp->client_index >= (sizeof(CLIENT) - 1)) { | 
|  | LOG_DBG("Received complete CLIENT string"); | 
|  | offset = ppp_send_bytes(ppp, clientserver, | 
|  | sizeof(CLIENTSERVER) - 1, 0); | 
|  | (void)ppp_send_flush(ppp, offset); | 
|  | ppp->client_index = 0; | 
|  | } | 
|  |  | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static int ppp_input_byte(struct ppp_driver_context *ppp, uint8_t byte) | 
|  | { | 
|  | int ret = -EAGAIN; | 
|  |  | 
|  | switch (ppp->state) { | 
|  | case STATE_HDLC_FRAME_START: | 
|  | /* Synchronizing the flow with HDLC flag field */ | 
|  | if (byte == 0x7e) { | 
|  | /* Note that we do not save the sync flag */ | 
|  | LOG_DBG("Sync byte (0x%02x) start", byte); | 
|  | ppp_change_state(ppp, STATE_HDLC_FRAME_ADDRESS); | 
|  | #if defined(CONFIG_PPP_CLIENT_CLIENTSERVER) | 
|  | } else { | 
|  | ppp_handle_client(ppp, byte); | 
|  | #endif | 
|  | } | 
|  |  | 
|  | break; | 
|  |  | 
|  | case STATE_HDLC_FRAME_ADDRESS: | 
|  | if (byte != 0xff) { | 
|  | /* Check if we need to sync again */ | 
|  | if (byte == 0x7e) { | 
|  | /* Just skip to the start of the pkt byte */ | 
|  | return -EAGAIN; | 
|  | } | 
|  |  | 
|  | LOG_DBG("Invalid (0x%02x) byte, expecting Address", | 
|  | byte); | 
|  |  | 
|  | /* If address is != 0xff, then ignore this | 
|  | * frame. RFC 1662 ch 3.1 | 
|  | */ | 
|  | ppp_change_state(ppp, STATE_HDLC_FRAME_START); | 
|  | } else { | 
|  | LOG_DBG("Address byte (0x%02x) start", byte); | 
|  |  | 
|  | ppp_change_state(ppp, STATE_HDLC_FRAME_DATA); | 
|  |  | 
|  | /* Save the address field so that we can calculate | 
|  | * the FCS. The address field will not be passed | 
|  | * to upper stack. | 
|  | */ | 
|  | ret = ppp_save_byte(ppp, byte); | 
|  | if (ret < 0) { | 
|  | ppp_change_state(ppp, STATE_HDLC_FRAME_START); | 
|  | } | 
|  |  | 
|  | ret = -EAGAIN; | 
|  | } | 
|  |  | 
|  | break; | 
|  |  | 
|  | case STATE_HDLC_FRAME_DATA: | 
|  | /* If the next frame starts, then send this one | 
|  | * up in the network stack. | 
|  | */ | 
|  | if (byte == 0x7e) { | 
|  | LOG_DBG("End of pkt (0x%02x)", byte); | 
|  | ppp_change_state(ppp, STATE_HDLC_FRAME_ADDRESS); | 
|  | ret = 0; | 
|  | } else { | 
|  | if (byte == 0x7d) { | 
|  | /* RFC 1662, ch. 4.2 */ | 
|  | ppp->next_escaped = true; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (ppp->next_escaped) { | 
|  | /* RFC 1662, ch. 4.2 */ | 
|  | byte ^= 0x20; | 
|  | ppp->next_escaped = false; | 
|  | } | 
|  |  | 
|  | ret = ppp_save_byte(ppp, byte); | 
|  | if (ret < 0) { | 
|  | ppp_change_state(ppp, STATE_HDLC_FRAME_START); | 
|  | } | 
|  |  | 
|  | ret = -EAGAIN; | 
|  | } | 
|  |  | 
|  | break; | 
|  |  | 
|  | default: | 
|  | LOG_ERR("[%p] Invalid state %d", ppp, ppp->state); | 
|  | break; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static bool ppp_check_fcs(struct ppp_driver_context *ppp) | 
|  | { | 
|  | struct net_buf *buf; | 
|  | uint16_t crc; | 
|  |  | 
|  | buf = ppp->pkt->buffer; | 
|  | if (!buf) { | 
|  | return false; | 
|  | } | 
|  |  | 
|  | crc = crc16_ccitt(0xffff, buf->data, buf->len); | 
|  |  | 
|  | buf = buf->frags; | 
|  |  | 
|  | while (buf) { | 
|  | crc = crc16_ccitt(crc, buf->data, buf->len); | 
|  | buf = buf->frags; | 
|  | } | 
|  |  | 
|  | if (crc != 0xf0b8) { | 
|  | LOG_DBG("Invalid FCS (0x%x)", crc); | 
|  | #if defined(CONFIG_NET_STATISTICS_PPP) | 
|  | ppp->stats.chkerr++; | 
|  | #endif | 
|  | return false; | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static void ppp_process_msg(struct ppp_driver_context *ppp) | 
|  | { | 
|  | if (LOG_LEVEL >= LOG_LEVEL_DBG) { | 
|  | net_pkt_hexdump(ppp->pkt, "recv ppp"); | 
|  | } | 
|  |  | 
|  | if (IS_ENABLED(CONFIG_NET_PPP_VERIFY_FCS) && !ppp_check_fcs(ppp)) { | 
|  | #if defined(CONFIG_NET_STATISTICS_PPP) | 
|  | ppp->stats.drop++; | 
|  | ppp->stats.pkts.rx++; | 
|  | #endif | 
|  | net_pkt_unref(ppp->pkt); | 
|  | } else { | 
|  | /* If PPP packet capturing is enabled, then send the | 
|  | * full packet with PPP headers for processing. Currently this | 
|  | * captures only valid frames. If we would need to receive also | 
|  | * invalid frames, the if-block would need to be moved before | 
|  | * fcs check above. | 
|  | */ | 
|  | if (IS_ENABLED(CONFIG_NET_PPP_CAPTURE) && | 
|  | net_capture_is_enabled(NULL) && ppp_capture_ctx) { | 
|  | size_t copied; | 
|  |  | 
|  | /* Linearize the packet data. We cannot use the | 
|  | * capture API that deals with net_pkt as we work | 
|  | * in cooked mode and want to capture also the | 
|  | * HDLC frame data. | 
|  | */ | 
|  | copied = net_buf_linearize(ppp_capture_ctx->capture_buf, | 
|  | sizeof(ppp_capture_ctx->capture_buf), | 
|  | ppp->pkt->buffer, | 
|  | 0U, | 
|  | net_pkt_get_len(ppp->pkt)); | 
|  |  | 
|  | net_capture_data(&ppp_capture_ctx->cooked, | 
|  | ppp_capture_ctx->capture_buf, | 
|  | copied, | 
|  | NET_CAPTURE_HOST, | 
|  | NET_ETH_PTYPE_HDLC); | 
|  | } | 
|  |  | 
|  | /* Remove the Address (0xff), Control (0x03) and | 
|  | * FCS fields (16-bit) as the PPP L2 layer does not need | 
|  | * those bytes. | 
|  | */ | 
|  | uint16_t addr_and_ctrl = net_buf_pull_be16(ppp->pkt->buffer); | 
|  |  | 
|  | /* Currently we do not support compressed Address and Control | 
|  | * fields so they must always be present. | 
|  | */ | 
|  | if (addr_and_ctrl != (0xff << 8 | 0x03)) { | 
|  | #if defined(CONFIG_NET_STATISTICS_PPP) | 
|  | ppp->stats.drop++; | 
|  | ppp->stats.pkts.rx++; | 
|  | #endif | 
|  | net_pkt_unref(ppp->pkt); | 
|  | } else { | 
|  | /* Remove FCS bytes (2) */ | 
|  | net_pkt_remove_tail(ppp->pkt, 2); | 
|  |  | 
|  | /* Make sure we now start reading from PPP header in | 
|  | * PPP L2 recv() | 
|  | */ | 
|  | net_pkt_cursor_init(ppp->pkt); | 
|  | net_pkt_set_overwrite(ppp->pkt, true); | 
|  |  | 
|  | if (net_recv_data(ppp->iface, ppp->pkt) < 0) { | 
|  | net_pkt_unref(ppp->pkt); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | ppp->pkt = NULL; | 
|  | } | 
|  |  | 
|  | #if defined(CONFIG_NET_TEST) | 
|  | static uint8_t *ppp_recv_cb(uint8_t *buf, size_t *off) | 
|  | { | 
|  | struct ppp_driver_context *ppp = | 
|  | CONTAINER_OF(buf, struct ppp_driver_context, buf[0]); | 
|  | size_t i, len = *off; | 
|  |  | 
|  | for (i = 0; i < *off; i++) { | 
|  | if (0) { | 
|  | /* Extra debugging can be enabled separately if really | 
|  | * needed. Normally it would just print too much data. | 
|  | */ | 
|  | LOG_DBG("[%zd] %02x", i, buf[i]); | 
|  | } | 
|  |  | 
|  | if (ppp_input_byte(ppp, buf[i]) == 0) { | 
|  | /* Ignore empty or too short frames */ | 
|  | if (ppp->pkt && net_pkt_get_len(ppp->pkt) > 3) { | 
|  | ppp_process_msg(ppp); | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | if (i == *off) { | 
|  | *off = 0; | 
|  | } else { | 
|  | *off = len - i - 1; | 
|  |  | 
|  | memmove(&buf[0], &buf[i + 1], *off); | 
|  | } | 
|  |  | 
|  | return buf; | 
|  | } | 
|  |  | 
|  | void ppp_driver_feed_data(uint8_t *data, int data_len) | 
|  | { | 
|  | struct ppp_driver_context *ppp = &ppp_driver_context_data; | 
|  | size_t recv_off = 0; | 
|  |  | 
|  | /* We are expecting that the tests are feeding data in large | 
|  | * chunks so we can reset the uart buffer here. | 
|  | */ | 
|  | memset(ppp->buf, 0, UART_BUF_LEN); | 
|  |  | 
|  | ppp_change_state(ppp, STATE_HDLC_FRAME_START); | 
|  |  | 
|  | while (data_len > 0) { | 
|  | int data_to_copy = MIN(data_len, UART_BUF_LEN); | 
|  | int remaining; | 
|  |  | 
|  | LOG_DBG("Feeding %d bytes", data_to_copy); | 
|  |  | 
|  | memcpy(ppp->buf, data, data_to_copy); | 
|  |  | 
|  | recv_off = data_to_copy; | 
|  |  | 
|  | (void)ppp_recv_cb(ppp->buf, &recv_off); | 
|  |  | 
|  | remaining = data_to_copy - recv_off; | 
|  |  | 
|  | LOG_DBG("We copied %d bytes", remaining); | 
|  |  | 
|  | data_len -= remaining; | 
|  | data += remaining; | 
|  | } | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static bool calc_fcs(struct net_pkt *pkt, uint16_t *fcs, uint16_t protocol) | 
|  | { | 
|  | struct net_buf *buf; | 
|  | uint16_t crc; | 
|  | uint16_t c; | 
|  |  | 
|  | buf = pkt->buffer; | 
|  | if (!buf) { | 
|  | return false; | 
|  | } | 
|  |  | 
|  | /* HDLC Address and Control fields */ | 
|  | c = sys_cpu_to_be16(0xff << 8 | 0x03); | 
|  |  | 
|  | crc = crc16_ccitt(0xffff, (const uint8_t *)&c, sizeof(c)); | 
|  |  | 
|  | if (protocol > 0) { | 
|  | crc = crc16_ccitt(crc, (const uint8_t *)&protocol, | 
|  | sizeof(protocol)); | 
|  | } | 
|  |  | 
|  | while (buf) { | 
|  | crc = crc16_ccitt(crc, buf->data, buf->len); | 
|  | buf = buf->frags; | 
|  | } | 
|  |  | 
|  | crc ^= 0xffff; | 
|  | *fcs = crc; | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static uint16_t ppp_escape_byte(uint8_t byte, int *offset) | 
|  | { | 
|  | if (byte == 0x7e || byte == 0x7d || byte < 0x20) { | 
|  | *offset = 0; | 
|  | return (0x7d << 8) | (byte ^ 0x20); | 
|  | } | 
|  |  | 
|  | *offset = 1; | 
|  | return byte; | 
|  | } | 
|  |  | 
|  | static int ppp_send(const struct device *dev, struct net_pkt *pkt) | 
|  | { | 
|  | struct ppp_driver_context *ppp = dev->data; | 
|  | struct net_buf *buf = pkt->buffer; | 
|  | uint16_t protocol = 0; | 
|  | int send_off = 0; | 
|  | uint32_t sync_addr_ctrl; | 
|  | uint16_t fcs, escaped; | 
|  | uint8_t byte; | 
|  | int i, offset; | 
|  |  | 
|  | #if defined(CONFIG_NET_TEST) | 
|  | return 0; | 
|  | #endif | 
|  |  | 
|  | ARG_UNUSED(dev); | 
|  |  | 
|  | if (!buf) { | 
|  | /* No data? */ | 
|  | return -ENODATA; | 
|  | } | 
|  |  | 
|  | /* If the packet is a normal network packet, we must add the protocol | 
|  | * value here. | 
|  | */ | 
|  | if (!net_pkt_is_ppp(pkt)) { | 
|  | if (net_pkt_family(pkt) == AF_INET) { | 
|  | protocol = htons(PPP_IP); | 
|  | } else if (net_pkt_family(pkt) == AF_INET6) { | 
|  | protocol = htons(PPP_IPV6); | 
|  | }  else { | 
|  | return -EPROTONOSUPPORT; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!calc_fcs(pkt, &fcs, protocol)) { | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | /* Sync, Address & Control fields */ | 
|  | sync_addr_ctrl = sys_cpu_to_be32(0x7e << 24 | 0xff << 16 | | 
|  | 0x7d << 8 | 0x23); | 
|  | send_off = ppp_send_bytes(ppp, (const uint8_t *)&sync_addr_ctrl, | 
|  | sizeof(sync_addr_ctrl), send_off); | 
|  |  | 
|  | if (protocol > 0) { | 
|  | escaped = htons(ppp_escape_byte(protocol, &offset)); | 
|  | send_off = ppp_send_bytes(ppp, (uint8_t *)&escaped + offset, | 
|  | offset ? 1 : 2, | 
|  | send_off); | 
|  |  | 
|  | escaped = htons(ppp_escape_byte(protocol >> 8, &offset)); | 
|  | send_off = ppp_send_bytes(ppp, (uint8_t *)&escaped + offset, | 
|  | offset ? 1 : 2, | 
|  | send_off); | 
|  | } | 
|  |  | 
|  | /* Note that we do not print the first four bytes and FCS bytes at the | 
|  | * end so that we do not need to allocate separate net_buf just for | 
|  | * that purpose. | 
|  | */ | 
|  | if (LOG_LEVEL >= LOG_LEVEL_DBG) { | 
|  | net_pkt_hexdump(pkt, "send ppp"); | 
|  | } | 
|  |  | 
|  | while (buf) { | 
|  | for (i = 0; i < buf->len; i++) { | 
|  | /* Escape illegal bytes */ | 
|  | escaped = htons(ppp_escape_byte(buf->data[i], &offset)); | 
|  | send_off = ppp_send_bytes(ppp, | 
|  | (uint8_t *)&escaped + offset, | 
|  | offset ? 1 : 2, | 
|  | send_off); | 
|  | } | 
|  |  | 
|  | buf = buf->frags; | 
|  | } | 
|  |  | 
|  | escaped = htons(ppp_escape_byte(fcs, &offset)); | 
|  | send_off = ppp_send_bytes(ppp, (uint8_t *)&escaped + offset, | 
|  | offset ? 1 : 2, | 
|  | send_off); | 
|  |  | 
|  | escaped = htons(ppp_escape_byte(fcs >> 8, &offset)); | 
|  | send_off = ppp_send_bytes(ppp, (uint8_t *)&escaped + offset, | 
|  | offset ? 1 : 2, | 
|  | send_off); | 
|  |  | 
|  | byte = 0x7e; | 
|  | send_off = ppp_send_bytes(ppp, &byte, 1, send_off); | 
|  |  | 
|  | (void)ppp_send_flush(ppp, send_off); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #if !defined(CONFIG_NET_TEST) | 
|  | static int ppp_consume_ringbuf(struct ppp_driver_context *ppp) | 
|  | { | 
|  | uint8_t *data; | 
|  | size_t len, tmp; | 
|  | int ret; | 
|  |  | 
|  | len = ring_buf_get_claim(&ppp->rx_ringbuf, &data, | 
|  | CONFIG_NET_PPP_RINGBUF_SIZE); | 
|  | if (len == 0) { | 
|  | LOG_DBG("Ringbuf %p is empty!", &ppp->rx_ringbuf); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* This will print too much data, enable only if really needed */ | 
|  | if (0) { | 
|  | LOG_HEXDUMP_DBG(data, len, ppp->dev->name); | 
|  | } | 
|  |  | 
|  | tmp = len; | 
|  |  | 
|  | do { | 
|  | if (ppp_input_byte(ppp, *data++) == 0) { | 
|  | /* Ignore empty or too short frames */ | 
|  | if (ppp->pkt && net_pkt_get_len(ppp->pkt) > 3) { | 
|  | ppp_process_msg(ppp); | 
|  | } | 
|  | } | 
|  | } while (--tmp); | 
|  |  | 
|  | ret = ring_buf_get_finish(&ppp->rx_ringbuf, len); | 
|  | if (ret < 0) { | 
|  | LOG_DBG("Cannot flush ring buffer (%d)", ret); | 
|  | } | 
|  |  | 
|  | return -EAGAIN; | 
|  | } | 
|  |  | 
|  | static void ppp_isr_cb_work(struct k_work *work) | 
|  | { | 
|  | struct ppp_driver_context *ppp = | 
|  | CONTAINER_OF(work, struct ppp_driver_context, cb_work); | 
|  | int ret = -EAGAIN; | 
|  |  | 
|  | while (ret == -EAGAIN) { | 
|  | ret = ppp_consume_ringbuf(ppp); | 
|  | } | 
|  | } | 
|  | #endif /* !CONFIG_NET_TEST */ | 
|  |  | 
|  | static int ppp_driver_init(const struct device *dev) | 
|  | { | 
|  | struct ppp_driver_context *ppp = dev->data; | 
|  |  | 
|  | LOG_DBG("[%p] dev %p", ppp, dev); | 
|  |  | 
|  | #if !defined(CONFIG_NET_TEST) | 
|  | ring_buf_init(&ppp->rx_ringbuf, sizeof(ppp->rx_buf), ppp->rx_buf); | 
|  | k_work_init(&ppp->cb_work, ppp_isr_cb_work); | 
|  |  | 
|  | k_work_queue_start(&ppp->cb_workq, ppp_workq, | 
|  | K_KERNEL_STACK_SIZEOF(ppp_workq), | 
|  | K_PRIO_COOP(PPP_WORKQ_PRIORITY), NULL); | 
|  | k_thread_name_set(&ppp->cb_workq.thread, "ppp_workq"); | 
|  | #if defined(CONFIG_NET_PPP_ASYNC_UART) | 
|  | k_work_init_delayable(&ppp->uart_recovery_work, uart_recovery); | 
|  | #endif | 
|  | #endif | 
|  | ppp->pkt = NULL; | 
|  | ppp_change_state(ppp, STATE_HDLC_FRAME_START); | 
|  | #if defined(CONFIG_PPP_CLIENT_CLIENTSERVER) | 
|  | ppp->client_index = 0; | 
|  | #endif | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void ppp_iface_init(struct net_if *iface) | 
|  | { | 
|  | struct ppp_driver_context *ppp = net_if_get_device(iface)->data; | 
|  |  | 
|  | LOG_DBG("[%p] iface %p", ppp, iface); | 
|  |  | 
|  | net_ppp_init(iface); | 
|  |  | 
|  | if (ppp->init_done) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | ppp->init_done = true; | 
|  | ppp->iface = iface; | 
|  |  | 
|  | if (CONFIG_PPP_MAC_ADDR[0] != 0) { | 
|  | if (net_bytes_from_str(ppp->mac_addr, sizeof(ppp->mac_addr), | 
|  | CONFIG_PPP_MAC_ADDR) < 0) { | 
|  | goto use_random_mac; | 
|  | } | 
|  | } else { | 
|  | use_random_mac: | 
|  | /* 00-00-5E-00-53-xx Documentation RFC 7042 */ | 
|  | ppp->mac_addr[0] = 0x00; | 
|  | ppp->mac_addr[1] = 0x00; | 
|  | ppp->mac_addr[2] = 0x5E; | 
|  | ppp->mac_addr[3] = 0x00; | 
|  | ppp->mac_addr[4] = 0x53; | 
|  | ppp->mac_addr[5] = sys_rand8_get(); | 
|  | } | 
|  |  | 
|  | /* The MAC address is not really used, but the network interface expects to find one. */ | 
|  | (void)net_linkaddr_set(&ppp->ll_addr, ppp->mac_addr, sizeof(ppp->mac_addr)); | 
|  |  | 
|  | net_if_set_link_addr(iface, ppp->ll_addr.addr, ppp->ll_addr.len, | 
|  | NET_LINK_ETHERNET); | 
|  |  | 
|  | if (IS_ENABLED(CONFIG_NET_PPP_CAPTURE)) { | 
|  | static bool capture_setup_done; | 
|  |  | 
|  | if (!capture_setup_done) { | 
|  | int ret; | 
|  |  | 
|  | ret = net_capture_cooked_setup(&ppp_capture_ctx->cooked, | 
|  | ARPHRD_PPP, | 
|  | sizeof(ppp->mac_addr), | 
|  | ppp->mac_addr); | 
|  | if (ret < 0) { | 
|  | LOG_DBG("Cannot setup capture (%d)", ret); | 
|  | } else { | 
|  | capture_setup_done = true; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | memset(ppp->buf, 0, sizeof(ppp->buf)); | 
|  |  | 
|  | /* | 
|  | * Set the point-to-point interface flag. This is needed at least for IPv6 neighbor | 
|  | * discovery to handle packets correctly. | 
|  | */ | 
|  | net_if_flag_set(iface, NET_IF_POINTOPOINT); | 
|  |  | 
|  | #if defined(CONFIG_PPP_NET_IF_NO_AUTO_START) | 
|  | /* | 
|  | * If interface autostart is disabled from Kconfig, then do not start the | 
|  | * interface automatically but only when manually started. | 
|  | */ | 
|  | net_if_flag_set(iface, NET_IF_NO_AUTO_START); | 
|  | #endif | 
|  | } | 
|  |  | 
|  | #if defined(CONFIG_NET_STATISTICS_PPP) | 
|  | static struct net_stats_ppp *ppp_get_stats(const struct device *dev) | 
|  | { | 
|  | struct ppp_driver_context *context = dev->data; | 
|  |  | 
|  | return &context->stats; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | #if !defined(CONFIG_NET_TEST) && !defined(CONFIG_NET_PPP_ASYNC_UART) | 
|  | static void ppp_uart_flush(const struct device *dev) | 
|  | { | 
|  | uint8_t c; | 
|  |  | 
|  | while (uart_fifo_read(dev, &c, 1) > 0) { | 
|  | continue; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void ppp_uart_isr(const struct device *uart, void *user_data) | 
|  | { | 
|  | struct ppp_driver_context *context = user_data; | 
|  | int rx = 0, ret; | 
|  |  | 
|  | /* get all of the data off UART as fast as we can */ | 
|  | while (uart_irq_update(uart) && uart_irq_rx_ready(uart)) { | 
|  | rx = uart_fifo_read(uart, context->buf, sizeof(context->buf)); | 
|  | if (rx <= 0) { | 
|  | continue; | 
|  | } | 
|  |  | 
|  | ret = ring_buf_put(&context->rx_ringbuf, context->buf, rx); | 
|  | if (ret < rx) { | 
|  | LOG_ERR("Rx buffer doesn't have enough space. " | 
|  | "Bytes pending: %d, written: %d", | 
|  | rx, ret); | 
|  | break; | 
|  | } | 
|  |  | 
|  | k_work_submit_to_queue(&context->cb_workq, &context->cb_work); | 
|  | } | 
|  | } | 
|  | #endif /* !CONFIG_NET_TEST && !CONFIG_NET_PPP_ASYNC_UART */ | 
|  |  | 
|  | static int ppp_start(const struct device *dev) | 
|  | { | 
|  | struct ppp_driver_context *context = dev->data; | 
|  |  | 
|  | /* Init the PPP UART. This should only be called once. */ | 
|  | #if !defined(CONFIG_NET_TEST) | 
|  | if (atomic_cas(&context->modem_init_done, false, true)) { | 
|  | context->dev = DEVICE_DT_GET(DT_CHOSEN(zephyr_ppp_uart)); | 
|  |  | 
|  | LOG_DBG("Initializing PPP to use %s", context->dev->name); | 
|  |  | 
|  | if (!device_is_ready(context->dev)) { | 
|  | LOG_ERR("Device %s is not ready", context->dev->name); | 
|  | return -ENODEV; | 
|  | } | 
|  | #if defined(CONFIG_NET_PPP_ASYNC_UART) | 
|  | k_sem_give(&uarte_tx_finished); | 
|  | ppp_async_uart_rx_enable(context); | 
|  | #else | 
|  | uart_irq_rx_disable(context->dev); | 
|  | uart_irq_tx_disable(context->dev); | 
|  | ppp_uart_flush(context->dev); | 
|  | uart_irq_callback_user_data_set(context->dev, ppp_uart_isr, | 
|  | context); | 
|  | uart_irq_rx_enable(context->dev); | 
|  | #endif | 
|  | } | 
|  | #endif /* !CONFIG_NET_TEST */ | 
|  |  | 
|  | net_if_carrier_on(context->iface); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ppp_stop(const struct device *dev) | 
|  | { | 
|  | struct ppp_driver_context *context = dev->data; | 
|  |  | 
|  | net_if_carrier_off(context->iface); | 
|  | #if defined(CONFIG_NET_PPP_ASYNC_UART) | 
|  | uart_rx_disable(context->dev); | 
|  | #endif | 
|  | context->modem_init_done = false; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct ppp_api ppp_if_api = { | 
|  | .iface_api.init = ppp_iface_init, | 
|  |  | 
|  | .send = ppp_send, | 
|  | .start = ppp_start, | 
|  | .stop = ppp_stop, | 
|  | #if defined(CONFIG_NET_STATISTICS_PPP) | 
|  | .get_stats = ppp_get_stats, | 
|  | #endif | 
|  | }; | 
|  |  | 
|  | NET_DEVICE_INIT(ppp, CONFIG_NET_PPP_DRV_NAME, ppp_driver_init, | 
|  | NULL, &ppp_driver_context_data, NULL, | 
|  | CONFIG_KERNEL_INIT_PRIORITY_DEFAULT, &ppp_if_api, | 
|  | PPP_L2, NET_L2_GET_CTX_TYPE(PPP_L2), PPP_MTU); |