| /* main.c - Application main entry point */ |
| |
| /* |
| * Copyright (c) 2018 Intel Corporation |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #define NET_LOG_LEVEL CONFIG_NET_IF_LOG_LEVEL |
| |
| #include <logging/log.h> |
| LOG_MODULE_REGISTER(net_test, NET_LOG_LEVEL); |
| |
| #include <zephyr/types.h> |
| #include <stdbool.h> |
| #include <stddef.h> |
| #include <string.h> |
| #include <errno.h> |
| #include <sys/printk.h> |
| |
| #include <ztest.h> |
| |
| #include <net/ethernet.h> |
| #include <net/net_ip.h> |
| #include <net/net_if.h> |
| #include <net/promiscuous.h> |
| |
| #define NET_LOG_ENABLED 1 |
| #include "net_private.h" |
| |
| #if NET_LOG_LEVEL >= LOG_LEVEL_DBG |
| #define DBG(fmt, ...) printk(fmt, ##__VA_ARGS__) |
| #else |
| #define DBG(fmt, ...) |
| #endif |
| |
| /* Interface 1 addresses */ |
| static struct in6_addr my_addr1 = { { { 0x20, 0x01, 0x0d, 0xb8, 1, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0x1 } } }; |
| |
| /* Interface 2 addresses */ |
| static struct in6_addr my_addr2 = { { { 0x20, 0x01, 0x0d, 0xb8, 2, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0x1 } } }; |
| |
| /* Interface 3 addresses */ |
| static struct in6_addr my_addr3 = { { { 0x20, 0x01, 0x0d, 0xb8, 3, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0x1 } } }; |
| |
| /* Extra address is assigned to ll_addr */ |
| static struct in6_addr ll_addr = { { { 0xfe, 0x80, 0x43, 0xb8, 0, 0, 0, 0, |
| 0, 0, 0, 0xf2, 0xaa, 0x29, 0x02, |
| 0x04 } } }; |
| |
| static struct in6_addr in6addr_mcast = { { { 0x20, 0x01, 0x0d, 0xb8, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0x1 } } }; |
| |
| static struct net_if *iface1; |
| static struct net_if *iface2; |
| |
| #define WAIT_TIME 250 |
| |
| struct net_if_test { |
| uint8_t idx; |
| uint8_t mac_addr[sizeof(struct net_eth_addr)]; |
| struct net_linkaddr ll_addr; |
| }; |
| |
| struct eth_fake_context { |
| struct net_if *iface; |
| uint8_t mac_address[6]; |
| bool promisc_mode; |
| }; |
| |
| static struct eth_fake_context eth_fake_data1; |
| static struct eth_fake_context eth_fake_data2; |
| |
| static void eth_fake_iface_init(struct net_if *iface) |
| { |
| const struct device *dev = net_if_get_device(iface); |
| struct eth_fake_context *ctx = dev->data; |
| |
| ctx->iface = iface; |
| |
| net_if_set_link_addr(iface, ctx->mac_address, |
| sizeof(ctx->mac_address), |
| NET_LINK_ETHERNET); |
| |
| ethernet_init(iface); |
| } |
| |
| static int eth_fake_send(const struct device *dev, |
| struct net_pkt *pkt) |
| { |
| ARG_UNUSED(dev); |
| ARG_UNUSED(pkt); |
| |
| return 0; |
| } |
| |
| static enum ethernet_hw_caps eth_fake_get_capabilities(const struct device *dev) |
| { |
| return ETHERNET_PROMISC_MODE; |
| } |
| |
| static int eth_fake_set_config(const struct device *dev, |
| enum ethernet_config_type type, |
| const struct ethernet_config *config) |
| { |
| struct eth_fake_context *ctx = dev->data; |
| |
| switch (type) { |
| case ETHERNET_CONFIG_TYPE_PROMISC_MODE: |
| if (config->promisc_mode == ctx->promisc_mode) { |
| return -EALREADY; |
| } |
| |
| ctx->promisc_mode = config->promisc_mode; |
| |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static struct ethernet_api eth_fake_api_funcs = { |
| .iface_api.init = eth_fake_iface_init, |
| |
| .get_capabilities = eth_fake_get_capabilities, |
| .set_config = eth_fake_set_config, |
| .send = eth_fake_send, |
| }; |
| |
| static int eth_fake_init(const struct device *dev) |
| { |
| struct eth_fake_context *ctx = dev->data; |
| |
| ctx->promisc_mode = false; |
| |
| return 0; |
| } |
| |
| ETH_NET_DEVICE_INIT(eth_fake1, "eth_fake1", |
| eth_fake_init, NULL, |
| ð_fake_data1, NULL, CONFIG_ETH_INIT_PRIORITY, |
| ð_fake_api_funcs, NET_ETH_MTU); |
| |
| ETH_NET_DEVICE_INIT(eth_fake2, "eth_fake2", |
| eth_fake_init, NULL, |
| ð_fake_data2, NULL, CONFIG_ETH_INIT_PRIORITY, |
| ð_fake_api_funcs, NET_ETH_MTU); |
| |
| #if NET_LOG_LEVEL >= LOG_LEVEL_DBG |
| static const char *iface2str(struct net_if *iface) |
| { |
| if (net_if_l2(iface) == &NET_L2_GET_NAME(ETHERNET)) { |
| return "Ethernet"; |
| } |
| |
| if (net_if_l2(iface) == &NET_L2_GET_NAME(DUMMY)) { |
| return "Dummy"; |
| } |
| |
| return "<unknown type>"; |
| } |
| #endif |
| |
| static void iface_cb(struct net_if *iface, void *user_data) |
| { |
| static int if_count; |
| |
| DBG("Interface %p (%s) [%d]\n", iface, iface2str(iface), |
| net_if_get_by_iface(iface)); |
| |
| if (net_if_l2(iface) == &NET_L2_GET_NAME(ETHERNET)) { |
| const struct ethernet_api *api = |
| net_if_get_device(iface)->api; |
| |
| /* As native_posix board will introduce another ethernet |
| * interface, make sure that we only use our own in this test. |
| */ |
| if (api->get_capabilities == |
| eth_fake_api_funcs.get_capabilities) { |
| switch (if_count) { |
| case 0: |
| iface1 = iface; |
| break; |
| case 1: |
| iface2 = iface; |
| break; |
| } |
| |
| if_count++; |
| } |
| } |
| } |
| |
| static void test_iface_setup(void) |
| { |
| struct net_if_mcast_addr *maddr; |
| struct net_if_addr *ifaddr; |
| int idx; |
| |
| net_if_foreach(iface_cb, NULL); |
| |
| idx = net_if_get_by_iface(iface1); |
| ((struct net_if_test *) |
| net_if_get_device(iface1)->data)->idx = idx; |
| |
| idx = net_if_get_by_iface(iface2); |
| ((struct net_if_test *) |
| net_if_get_device(iface2)->data)->idx = idx; |
| |
| zassert_not_null(iface1, "Interface 1"); |
| zassert_not_null(iface2, "Interface 2"); |
| |
| DBG("Interfaces: [%d] iface1 %p, [%d] iface2 %p\n", |
| net_if_get_by_iface(iface1), iface1, |
| net_if_get_by_iface(iface2), iface2); |
| |
| ifaddr = net_if_ipv6_addr_add(iface1, &my_addr1, |
| NET_ADDR_MANUAL, 0); |
| if (!ifaddr) { |
| DBG("Cannot add IPv6 address %s\n", |
| net_sprint_ipv6_addr(&my_addr1)); |
| zassert_not_null(ifaddr, "addr1"); |
| } |
| |
| /* For testing purposes we need to set the adddresses preferred */ |
| ifaddr->addr_state = NET_ADDR_PREFERRED; |
| |
| ifaddr = net_if_ipv6_addr_add(iface1, &ll_addr, |
| NET_ADDR_MANUAL, 0); |
| if (!ifaddr) { |
| DBG("Cannot add IPv6 address %s\n", |
| net_sprint_ipv6_addr(&ll_addr)); |
| zassert_not_null(ifaddr, "ll_addr"); |
| } |
| |
| ifaddr->addr_state = NET_ADDR_PREFERRED; |
| |
| ifaddr = net_if_ipv6_addr_add(iface2, &my_addr2, |
| NET_ADDR_MANUAL, 0); |
| if (!ifaddr) { |
| DBG("Cannot add IPv6 address %s\n", |
| net_sprint_ipv6_addr(&my_addr2)); |
| zassert_not_null(ifaddr, "addr2"); |
| } |
| |
| ifaddr->addr_state = NET_ADDR_PREFERRED; |
| |
| ifaddr = net_if_ipv6_addr_add(iface2, &my_addr3, |
| NET_ADDR_MANUAL, 0); |
| if (!ifaddr) { |
| DBG("Cannot add IPv6 address %s\n", |
| net_sprint_ipv6_addr(&my_addr3)); |
| zassert_not_null(ifaddr, "addr3"); |
| } |
| |
| ifaddr->addr_state = NET_ADDR_PREFERRED; |
| |
| net_ipv6_addr_create(&in6addr_mcast, 0xff02, 0, 0, 0, 0, 0, 0, 0x0001); |
| |
| maddr = net_if_ipv6_maddr_add(iface1, &in6addr_mcast); |
| if (!maddr) { |
| DBG("Cannot add multicast IPv6 address %s\n", |
| net_sprint_ipv6_addr(&in6addr_mcast)); |
| zassert_not_null(maddr, "mcast"); |
| } |
| |
| net_if_up(iface1); |
| net_if_up(iface2); |
| } |
| |
| static void _set_promisc_mode_on_again(struct net_if *iface) |
| { |
| int ret; |
| |
| DBG("Make sure promiscuous mode is ON (%p)\n", iface); |
| |
| ret = net_promisc_mode_on(iface); |
| |
| zassert_equal(ret, -EALREADY, "iface %p promiscuous mode ON", iface); |
| } |
| |
| static void _set_promisc_mode_on(struct net_if *iface) |
| { |
| bool ret; |
| |
| DBG("Setting promiscuous mode ON (%p)\n", iface); |
| |
| ret = net_promisc_mode_on(iface); |
| |
| zassert_equal(ret, 0, "iface %p promiscuous mode set ON failed", |
| iface); |
| } |
| |
| static void _set_promisc_mode_off_again(struct net_if *iface) |
| { |
| int ret; |
| |
| DBG("Make sure promiscuous mode is OFF (%p)\n", iface); |
| |
| ret = net_promisc_mode_off(iface); |
| |
| zassert_equal(ret, -EALREADY, "iface %p promiscuous mode OFF", iface); |
| } |
| |
| static void _set_promisc_mode_off(struct net_if *iface) |
| { |
| int ret; |
| |
| DBG("Setting promiscuous mode OFF (%p)\n", iface); |
| |
| ret = net_promisc_mode_off(iface); |
| |
| zassert_equal(ret, 0, "iface %p promiscuous mode set OFF failed", |
| iface); |
| } |
| |
| static void test_set_promisc_mode_on_again(void) |
| { |
| _set_promisc_mode_on_again(iface1); |
| _set_promisc_mode_on_again(iface2); |
| } |
| |
| static void test_set_promisc_mode_on(void) |
| { |
| _set_promisc_mode_on(iface1); |
| _set_promisc_mode_on(iface2); |
| } |
| |
| static void test_set_promisc_mode_off_again(void) |
| { |
| _set_promisc_mode_off_again(iface1); |
| _set_promisc_mode_off_again(iface2); |
| } |
| |
| static void test_set_promisc_mode_off(void) |
| { |
| _set_promisc_mode_off(iface1); |
| _set_promisc_mode_off(iface2); |
| } |
| |
| static void _recv_data(struct net_if *iface, struct net_pkt **pkt) |
| { |
| static uint8_t data[] = { 't', 'e', 's', 't', '\0' }; |
| int ret; |
| |
| *pkt = net_pkt_rx_alloc_with_buffer(iface, sizeof(data), |
| AF_UNSPEC, 0, K_FOREVER); |
| |
| net_pkt_write(*pkt, data, sizeof(data)); |
| |
| ret = net_recv_data(iface, *pkt); |
| zassert_equal(ret, 0, "Data receive failure"); |
| } |
| |
| static struct net_pkt *pkt1; |
| static struct net_pkt *pkt2; |
| |
| static void test_recv_data(void) |
| { |
| _recv_data(iface1, &pkt1); |
| _recv_data(iface2, &pkt2); |
| } |
| |
| static void test_verify_data(void) |
| { |
| struct net_pkt *pkt; |
| |
| pkt = net_promisc_mode_wait_data(K_SECONDS(1)); |
| zassert_equal_ptr(pkt, pkt1, "pkt %p != %p", pkt, pkt1); |
| net_pkt_unref(pkt); |
| |
| pkt = net_promisc_mode_wait_data(K_SECONDS(1)); |
| zassert_equal_ptr(pkt, pkt2, "pkt %p != %p", pkt, pkt2); |
| net_pkt_unref(pkt); |
| } |
| |
| void test_main(void) |
| { |
| ztest_test_suite(net_promisc_test, |
| ztest_unit_test(test_iface_setup), |
| ztest_unit_test(test_set_promisc_mode_on), |
| ztest_unit_test(test_set_promisc_mode_on_again), |
| ztest_unit_test(test_recv_data), |
| ztest_unit_test(test_verify_data), |
| ztest_unit_test(test_set_promisc_mode_off), |
| ztest_unit_test(test_set_promisc_mode_off_again)); |
| |
| ztest_run_test_suite(net_promisc_test); |
| } |