| # SPDX-License-Identifier: Apache-2.0 |
| |
| menuconfig IPM |
| bool "IPM drivers" |
| help |
| Include interrupt-based inter-processor mailboxes |
| drivers in system configuration |
| |
| if IPM |
| |
| config IPM_MCUX |
| bool "MCUX IPM driver" |
| depends on HAS_MCUX |
| help |
| Driver for MCUX mailbox |
| |
| config IPM_IMX |
| bool "IMX IPM driver" |
| depends on HAS_IMX_HAL |
| help |
| Driver for NXP i.MX messaging unit |
| |
| choice |
| prompt "IMX IPM max data size" |
| default IPM_IMX_MAX_DATA_SIZE_16 |
| depends on IPM_IMX |
| help |
| Select maximum message size for NXP i.MX messaging unit. |
| |
| config IPM_IMX_MAX_DATA_SIZE_4 |
| bool "4 bytes" |
| help |
| There will be four message types with ids 0, 1, 2 or 3 |
| and a maximum size of 4 bytes each. |
| |
| config IPM_IMX_MAX_DATA_SIZE_8 |
| bool "8 bytes" |
| help |
| There will be two message types with ids 0 or 1 |
| and a maximum size of 8 bytes each. |
| |
| config IPM_IMX_MAX_DATA_SIZE_16 |
| bool "16 bytes" |
| help |
| There will be a single message type with id 0 |
| and a maximum size of 16 bytes. |
| |
| endchoice |
| |
| config IPM_IMX_MAX_DATA_SIZE |
| int |
| range 4 16 |
| default 4 if IPM_IMX_MAX_DATA_SIZE_4 |
| default 8 if IPM_IMX_MAX_DATA_SIZE_8 |
| default 16 if IPM_IMX_MAX_DATA_SIZE_16 |
| depends on IPM_IMX |
| |
| config IPM_IMX_MAX_ID_VAL |
| int |
| range 0 3 |
| default 3 if IPM_IMX_MAX_DATA_SIZE_4 |
| default 1 if IPM_IMX_MAX_DATA_SIZE_8 |
| default 0 if IPM_IMX_MAX_DATA_SIZE_16 |
| depends on IPM_IMX |
| |
| config IPM_MHU |
| bool "IPM MHU driver" |
| help |
| Driver for SSE 200 MHU (Message Handling Unit) |
| |
| config IPM_NRFX |
| bool "IPM NRF driver" |
| depends on HAS_HW_NRF_IPC |
| select NRFX_IPC |
| help |
| Driver for Nordic nRF messaging unit, based |
| on nRF IPC peripheral HW. |
| |
| config IPM_NRF_SINGLE_INSTANCE |
| bool "Single instance of IPM device" |
| help |
| Enable this option if the IPM device should have |
| a single instance, instead of one per IPC |
| message channel. |
| |
| source "drivers/ipm/Kconfig.nrfx" |
| |
| config IPM_STM32_IPCC |
| bool "STM32 IPCC controller" |
| select USE_STM32_LL_IPCC |
| help |
| Driver for stm32 IPCC mailboxes |
| |
| config IPM_STM32_IPCC_PROCID |
| int "STM32 IPCC Processor ID" |
| default 2 |
| range 1 2 |
| depends on IPM_STM32_IPCC |
| help |
| use to define the Processor ID for IPCC access |
| |
| module = IPM |
| module-str = ipm |
| source "subsys/logging/Kconfig.template.log_config" |
| |
| endif #IPM |
