| /* uart_h5.c - UART based Bluetooth driver */ |
| |
| /* |
| * Copyright (c) 2015-2016 Intel Corporation |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <errno.h> |
| #include <stddef.h> |
| |
| #include <zephyr/zephyr.h> |
| |
| #include <zephyr/init.h> |
| #include <zephyr/drivers/uart.h> |
| #include <zephyr/sys/util.h> |
| #include <zephyr/sys/byteorder.h> |
| #include <zephyr/debug/stack.h> |
| #include <zephyr/sys/printk.h> |
| #include <string.h> |
| |
| #include <zephyr/bluetooth/bluetooth.h> |
| #include <zephyr/bluetooth/hci.h> |
| #include <zephyr/drivers/bluetooth/hci_driver.h> |
| |
| #define BT_DBG_ENABLED IS_ENABLED(CONFIG_BT_DEBUG_HCI_DRIVER) |
| #define LOG_MODULE_NAME bt_driver |
| #include "common/log.h" |
| |
| #include "../util.h" |
| |
| static K_KERNEL_STACK_DEFINE(tx_stack, 256); |
| static K_KERNEL_STACK_DEFINE(rx_stack, 256); |
| |
| static struct k_thread tx_thread_data; |
| static struct k_thread rx_thread_data; |
| |
| static struct k_work_delayable ack_work; |
| static struct k_work_delayable retx_work; |
| |
| #define HCI_3WIRE_ACK_PKT 0x00 |
| #define HCI_COMMAND_PKT 0x01 |
| #define HCI_ACLDATA_PKT 0x02 |
| #define HCI_SCODATA_PKT 0x03 |
| #define HCI_EVENT_PKT 0x04 |
| #define HCI_ISODATA_PKT 0x05 |
| #define HCI_3WIRE_LINK_PKT 0x0f |
| #define HCI_VENDOR_PKT 0xff |
| |
| static bool reliable_packet(uint8_t type) |
| { |
| switch (type) { |
| case HCI_COMMAND_PKT: |
| case HCI_ACLDATA_PKT: |
| case HCI_EVENT_PKT: |
| case HCI_ISODATA_PKT: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| /* FIXME: Correct timeout */ |
| #define H5_RX_ACK_TIMEOUT K_MSEC(250) |
| #define H5_TX_ACK_TIMEOUT K_MSEC(250) |
| |
| #define SLIP_DELIMITER 0xc0 |
| #define SLIP_ESC 0xdb |
| #define SLIP_ESC_DELIM 0xdc |
| #define SLIP_ESC_ESC 0xdd |
| |
| #define H5_RX_ESC 1 |
| #define H5_TX_ACK_PEND 2 |
| |
| #define H5_HDR_SEQ(hdr) ((hdr)[0] & 0x07) |
| #define H5_HDR_ACK(hdr) (((hdr)[0] >> 3) & 0x07) |
| #define H5_HDR_CRC(hdr) (((hdr)[0] >> 6) & 0x01) |
| #define H5_HDR_RELIABLE(hdr) (((hdr)[0] >> 7) & 0x01) |
| #define H5_HDR_PKT_TYPE(hdr) ((hdr)[1] & 0x0f) |
| #define H5_HDR_LEN(hdr) ((((hdr)[1] >> 4) & 0x0f) + ((hdr)[2] << 4)) |
| |
| #define H5_SET_SEQ(hdr, seq) ((hdr)[0] |= (seq)) |
| #define H5_SET_ACK(hdr, ack) ((hdr)[0] |= (ack) << 3) |
| #define H5_SET_RELIABLE(hdr) ((hdr)[0] |= 1 << 7) |
| #define H5_SET_TYPE(hdr, type) ((hdr)[1] |= type) |
| #define H5_SET_LEN(hdr, len) (((hdr)[1] |= ((len) & 0x0f) << 4), \ |
| ((hdr)[2] |= (len) >> 4)) |
| |
| static struct h5 { |
| struct net_buf *rx_buf; |
| |
| struct k_fifo tx_queue; |
| struct k_fifo rx_queue; |
| struct k_fifo unack_queue; |
| |
| uint8_t tx_win; |
| uint8_t tx_ack; |
| uint8_t tx_seq; |
| |
| uint8_t rx_ack; |
| |
| enum { |
| UNINIT, |
| INIT, |
| ACTIVE, |
| } link_state; |
| |
| enum { |
| START, |
| HEADER, |
| PAYLOAD, |
| END, |
| } rx_state; |
| } h5; |
| |
| static uint8_t unack_queue_len; |
| |
| static const uint8_t sync_req[] = { 0x01, 0x7e }; |
| static const uint8_t sync_rsp[] = { 0x02, 0x7d }; |
| /* Third byte may change */ |
| static uint8_t conf_req[3] = { 0x03, 0xfc }; |
| static const uint8_t conf_rsp[] = { 0x04, 0x7b }; |
| |
| /* H5 signal buffers pool */ |
| #define MAX_SIG_LEN 3 |
| #define SIGNAL_COUNT 2 |
| #define SIG_BUF_SIZE (BT_BUF_RESERVE + MAX_SIG_LEN) |
| NET_BUF_POOL_DEFINE(h5_pool, SIGNAL_COUNT, SIG_BUF_SIZE, 0, NULL); |
| |
| static const struct device *h5_dev; |
| |
| static void h5_reset_rx(void) |
| { |
| if (h5.rx_buf) { |
| net_buf_unref(h5.rx_buf); |
| h5.rx_buf = NULL; |
| } |
| |
| h5.rx_state = START; |
| } |
| |
| static int h5_unslip_byte(uint8_t *byte) |
| { |
| int count; |
| |
| if (*byte != SLIP_ESC) { |
| return 0; |
| } |
| |
| do { |
| count = uart_fifo_read(h5_dev, byte, sizeof(*byte)); |
| } while (!count); |
| |
| switch (*byte) { |
| case SLIP_ESC_DELIM: |
| *byte = SLIP_DELIMITER; |
| break; |
| case SLIP_ESC_ESC: |
| *byte = SLIP_ESC; |
| break; |
| default: |
| BT_ERR("Invalid escape byte %x\n", *byte); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static void process_unack(void) |
| { |
| uint8_t next_seq = h5.tx_seq; |
| uint8_t number_removed = unack_queue_len; |
| |
| if (!unack_queue_len) { |
| return; |
| } |
| |
| BT_DBG("rx_ack %u tx_ack %u tx_seq %u unack_queue_len %u", |
| h5.rx_ack, h5.tx_ack, h5.tx_seq, unack_queue_len); |
| |
| while (unack_queue_len > 0) { |
| if (next_seq == h5.rx_ack) { |
| /* Next sequence number is the same as last received |
| * ack number |
| */ |
| break; |
| } |
| |
| number_removed--; |
| /* Similar to (n - 1) % 8 with unsigned conversion */ |
| next_seq = (next_seq - 1) & 0x07; |
| } |
| |
| if (next_seq != h5.rx_ack) { |
| BT_ERR("Wrong sequence: rx_ack %u tx_seq %u next_seq %u", |
| h5.rx_ack, h5.tx_seq, next_seq); |
| } |
| |
| BT_DBG("Need to remove %u packet from the queue", number_removed); |
| |
| while (number_removed) { |
| struct net_buf *buf = net_buf_get(&h5.unack_queue, K_NO_WAIT); |
| |
| if (!buf) { |
| BT_ERR("Unack queue is empty"); |
| break; |
| } |
| |
| /* TODO: print or do something with packet */ |
| BT_DBG("Remove buf from the unack_queue"); |
| |
| net_buf_unref(buf); |
| unack_queue_len--; |
| number_removed--; |
| } |
| } |
| |
| static void h5_print_header(const uint8_t *hdr, const char *str) |
| { |
| if (H5_HDR_RELIABLE(hdr)) { |
| BT_DBG("%s REL: seq %u ack %u crc %u type %u len %u", |
| str, H5_HDR_SEQ(hdr), H5_HDR_ACK(hdr), |
| H5_HDR_CRC(hdr), H5_HDR_PKT_TYPE(hdr), |
| H5_HDR_LEN(hdr)); |
| } else { |
| BT_DBG("%s UNREL: ack %u crc %u type %u len %u", |
| str, H5_HDR_ACK(hdr), H5_HDR_CRC(hdr), |
| H5_HDR_PKT_TYPE(hdr), H5_HDR_LEN(hdr)); |
| } |
| } |
| |
| #if defined(CONFIG_BT_DEBUG_HCI_DRIVER) |
| static void hexdump(const char *str, const uint8_t *packet, size_t length) |
| { |
| int n = 0; |
| |
| if (!length) { |
| printk("%s zero-length signal packet\n", str); |
| return; |
| } |
| |
| while (length--) { |
| if (n % 16 == 0) { |
| printk("%s %08X ", str, n); |
| } |
| |
| printk("%02X ", *packet++); |
| |
| n++; |
| if (n % 8 == 0) { |
| if (n % 16 == 0) { |
| printk("\n"); |
| } else { |
| printk(" "); |
| } |
| } |
| } |
| |
| if (n % 16) { |
| printk("\n"); |
| } |
| } |
| #else |
| #define hexdump(str, packet, length) |
| #endif |
| |
| static uint8_t h5_slip_byte(uint8_t byte) |
| { |
| switch (byte) { |
| case SLIP_DELIMITER: |
| uart_poll_out(h5_dev, SLIP_ESC); |
| uart_poll_out(h5_dev, SLIP_ESC_DELIM); |
| return 2; |
| case SLIP_ESC: |
| uart_poll_out(h5_dev, SLIP_ESC); |
| uart_poll_out(h5_dev, SLIP_ESC_ESC); |
| return 2; |
| default: |
| uart_poll_out(h5_dev, byte); |
| return 1; |
| } |
| } |
| |
| static void h5_send(const uint8_t *payload, uint8_t type, int len) |
| { |
| uint8_t hdr[4]; |
| int i; |
| |
| hexdump("<= ", payload, len); |
| |
| (void)memset(hdr, 0, sizeof(hdr)); |
| |
| /* Set ACK for outgoing packet and stop delayed work */ |
| H5_SET_ACK(hdr, h5.tx_ack); |
| /* If cancel fails we may ack the same seq number twice, this is OK. */ |
| (void)k_work_cancel_delayable(&ack_work); |
| |
| if (reliable_packet(type)) { |
| H5_SET_RELIABLE(hdr); |
| H5_SET_SEQ(hdr, h5.tx_seq); |
| h5.tx_seq = (h5.tx_seq + 1) % 8; |
| } |
| |
| H5_SET_TYPE(hdr, type); |
| H5_SET_LEN(hdr, len); |
| |
| /* Calculate CRC */ |
| hdr[3] = ~((hdr[0] + hdr[1] + hdr[2]) & 0xff); |
| |
| h5_print_header(hdr, "TX: <"); |
| |
| uart_poll_out(h5_dev, SLIP_DELIMITER); |
| |
| for (i = 0; i < 4; i++) { |
| h5_slip_byte(hdr[i]); |
| } |
| |
| for (i = 0; i < len; i++) { |
| h5_slip_byte(payload[i]); |
| } |
| |
| uart_poll_out(h5_dev, SLIP_DELIMITER); |
| } |
| |
| /* Delayed work taking care about retransmitting packets */ |
| static void retx_timeout(struct k_work *work) |
| { |
| ARG_UNUSED(work); |
| |
| BT_DBG("unack_queue_len %u", unack_queue_len); |
| |
| if (unack_queue_len) { |
| struct k_fifo tmp_queue; |
| struct net_buf *buf; |
| |
| k_fifo_init(&tmp_queue); |
| |
| /* Queue to temporary queue */ |
| while ((buf = net_buf_get(&h5.tx_queue, K_NO_WAIT))) { |
| net_buf_put(&tmp_queue, buf); |
| } |
| |
| /* Queue unack packets to the beginning of the queue */ |
| while ((buf = net_buf_get(&h5.unack_queue, K_NO_WAIT))) { |
| /* include also packet type */ |
| net_buf_push(buf, sizeof(uint8_t)); |
| net_buf_put(&h5.tx_queue, buf); |
| h5.tx_seq = (h5.tx_seq - 1) & 0x07; |
| unack_queue_len--; |
| } |
| |
| /* Queue saved packets from temp queue */ |
| while ((buf = net_buf_get(&tmp_queue, K_NO_WAIT))) { |
| net_buf_put(&h5.tx_queue, buf); |
| } |
| } |
| } |
| |
| static void ack_timeout(struct k_work *work) |
| { |
| ARG_UNUSED(work); |
| |
| BT_DBG(""); |
| |
| h5_send(NULL, HCI_3WIRE_ACK_PKT, 0); |
| } |
| |
| static void h5_process_complete_packet(uint8_t *hdr) |
| { |
| struct net_buf *buf; |
| |
| BT_DBG(""); |
| |
| /* rx_ack should be in every packet */ |
| h5.rx_ack = H5_HDR_ACK(hdr); |
| |
| if (reliable_packet(H5_HDR_PKT_TYPE(hdr))) { |
| /* For reliable packet increment next transmit ack number */ |
| h5.tx_ack = (h5.tx_ack + 1) % 8; |
| /* Submit delayed work to ack the packet */ |
| k_work_reschedule(&ack_work, H5_RX_ACK_TIMEOUT); |
| } |
| |
| h5_print_header(hdr, "RX: >"); |
| |
| process_unack(); |
| |
| buf = h5.rx_buf; |
| h5.rx_buf = NULL; |
| |
| switch (H5_HDR_PKT_TYPE(hdr)) { |
| case HCI_3WIRE_ACK_PKT: |
| net_buf_unref(buf); |
| break; |
| case HCI_3WIRE_LINK_PKT: |
| net_buf_put(&h5.rx_queue, buf); |
| break; |
| case HCI_EVENT_PKT: |
| case HCI_ACLDATA_PKT: |
| case HCI_ISODATA_PKT: |
| hexdump("=> ", buf->data, buf->len); |
| bt_recv(buf); |
| break; |
| } |
| } |
| |
| static inline struct net_buf *get_evt_buf(uint8_t evt) |
| { |
| return bt_buf_get_evt(evt, false, K_NO_WAIT); |
| } |
| |
| static void bt_uart_isr(const struct device *unused, void *user_data) |
| { |
| static int remaining; |
| uint8_t byte; |
| int ret; |
| static uint8_t hdr[4]; |
| size_t buf_tailroom; |
| |
| ARG_UNUSED(unused); |
| ARG_UNUSED(user_data); |
| |
| while (uart_irq_update(h5_dev) && |
| uart_irq_is_pending(h5_dev)) { |
| |
| if (!uart_irq_rx_ready(h5_dev)) { |
| if (uart_irq_tx_ready(h5_dev)) { |
| BT_DBG("transmit ready"); |
| } else { |
| BT_DBG("spurious interrupt"); |
| } |
| /* Only the UART RX path is interrupt-enabled */ |
| break; |
| } |
| |
| ret = uart_fifo_read(h5_dev, &byte, sizeof(byte)); |
| if (!ret) { |
| continue; |
| } |
| |
| switch (h5.rx_state) { |
| case START: |
| if (byte == SLIP_DELIMITER) { |
| h5.rx_state = HEADER; |
| remaining = sizeof(hdr); |
| } |
| break; |
| case HEADER: |
| /* In a case we confuse ending slip delimiter |
| * with starting one. |
| */ |
| if (byte == SLIP_DELIMITER) { |
| remaining = sizeof(hdr); |
| continue; |
| } |
| |
| if (h5_unslip_byte(&byte) < 0) { |
| h5_reset_rx(); |
| continue; |
| } |
| |
| memcpy(&hdr[sizeof(hdr) - remaining], &byte, 1); |
| remaining--; |
| |
| if (remaining) { |
| break; |
| } |
| |
| remaining = H5_HDR_LEN(hdr); |
| |
| switch (H5_HDR_PKT_TYPE(hdr)) { |
| case HCI_EVENT_PKT: |
| /* The buffer is allocated only once we know |
| * the exact event type. |
| */ |
| h5.rx_state = PAYLOAD; |
| break; |
| case HCI_ACLDATA_PKT: |
| h5.rx_buf = bt_buf_get_rx(BT_BUF_ACL_IN, |
| K_NO_WAIT); |
| if (!h5.rx_buf) { |
| BT_WARN("No available data buffers"); |
| h5_reset_rx(); |
| continue; |
| } |
| |
| h5.rx_state = PAYLOAD; |
| break; |
| case HCI_ISODATA_PKT: |
| h5.rx_buf = bt_buf_get_rx(BT_BUF_ISO_IN, |
| K_NO_WAIT); |
| if (!h5.rx_buf) { |
| BT_WARN("No available data buffers"); |
| h5_reset_rx(); |
| continue; |
| } |
| |
| h5.rx_state = PAYLOAD; |
| break; |
| case HCI_3WIRE_LINK_PKT: |
| case HCI_3WIRE_ACK_PKT: |
| h5.rx_buf = net_buf_alloc(&h5_pool, K_NO_WAIT); |
| if (!h5.rx_buf) { |
| BT_WARN("No available signal buffers"); |
| h5_reset_rx(); |
| continue; |
| } |
| |
| h5.rx_state = PAYLOAD; |
| break; |
| default: |
| BT_ERR("Wrong packet type %u", |
| H5_HDR_PKT_TYPE(hdr)); |
| h5.rx_state = END; |
| break; |
| } |
| if (!remaining) { |
| h5.rx_state = END; |
| } |
| break; |
| case PAYLOAD: |
| if (h5_unslip_byte(&byte) < 0) { |
| h5_reset_rx(); |
| continue; |
| } |
| |
| /* Allocate HCI event buffer now that we know the |
| * exact event type. |
| */ |
| if (!h5.rx_buf) { |
| h5.rx_buf = get_evt_buf(byte); |
| if (!h5.rx_buf) { |
| BT_WARN("No available event buffers"); |
| h5_reset_rx(); |
| continue; |
| } |
| } |
| |
| buf_tailroom = net_buf_tailroom(h5.rx_buf); |
| if (buf_tailroom < sizeof(byte)) { |
| BT_ERR("Not enough space in buffer %zu/%zu", |
| sizeof(byte), buf_tailroom); |
| h5_reset_rx(); |
| break; |
| } |
| |
| net_buf_add_mem(h5.rx_buf, &byte, sizeof(byte)); |
| remaining--; |
| if (!remaining) { |
| h5.rx_state = END; |
| } |
| break; |
| case END: |
| if (byte != SLIP_DELIMITER) { |
| BT_ERR("Missing ending SLIP_DELIMITER"); |
| h5_reset_rx(); |
| break; |
| } |
| |
| BT_DBG("Received full packet: type %u", |
| H5_HDR_PKT_TYPE(hdr)); |
| |
| /* Check when full packet is received, it can be done |
| * when parsing packet header but we need to receive |
| * full packet anyway to clear UART. |
| */ |
| if (H5_HDR_RELIABLE(hdr) && |
| H5_HDR_SEQ(hdr) != h5.tx_ack) { |
| BT_ERR("Seq expected %u got %u. Drop packet", |
| h5.tx_ack, H5_HDR_SEQ(hdr)); |
| h5_reset_rx(); |
| break; |
| } |
| |
| h5_process_complete_packet(hdr); |
| h5.rx_state = START; |
| break; |
| } |
| } |
| } |
| |
| static uint8_t h5_get_type(struct net_buf *buf) |
| { |
| return net_buf_pull_u8(buf); |
| } |
| |
| static int h5_queue(struct net_buf *buf) |
| { |
| uint8_t type; |
| |
| BT_DBG("buf %p type %u len %u", buf, bt_buf_get_type(buf), buf->len); |
| |
| switch (bt_buf_get_type(buf)) { |
| case BT_BUF_CMD: |
| type = HCI_COMMAND_PKT; |
| break; |
| case BT_BUF_ACL_OUT: |
| type = HCI_ACLDATA_PKT; |
| break; |
| case BT_BUF_ISO_OUT: |
| type = HCI_ISODATA_PKT; |
| break; |
| default: |
| BT_ERR("Unknown packet type %u", bt_buf_get_type(buf)); |
| return -1; |
| } |
| |
| memcpy(net_buf_push(buf, sizeof(type)), &type, sizeof(type)); |
| |
| net_buf_put(&h5.tx_queue, buf); |
| |
| return 0; |
| } |
| |
| static void tx_thread(void) |
| { |
| BT_DBG(""); |
| |
| /* FIXME: make periodic sending */ |
| h5_send(sync_req, HCI_3WIRE_LINK_PKT, sizeof(sync_req)); |
| |
| while (true) { |
| struct net_buf *buf; |
| uint8_t type; |
| |
| BT_DBG("link_state %u", h5.link_state); |
| |
| switch (h5.link_state) { |
| case UNINIT: |
| /* FIXME: send sync */ |
| k_sleep(K_MSEC(100)); |
| break; |
| case INIT: |
| /* FIXME: send conf */ |
| k_sleep(K_MSEC(100)); |
| break; |
| case ACTIVE: |
| buf = net_buf_get(&h5.tx_queue, K_FOREVER); |
| type = h5_get_type(buf); |
| |
| h5_send(buf->data, type, buf->len); |
| |
| /* buf is dequeued from tx_queue and queued to unack |
| * queue. |
| */ |
| net_buf_put(&h5.unack_queue, buf); |
| unack_queue_len++; |
| |
| k_work_reschedule(&retx_work, H5_TX_ACK_TIMEOUT); |
| |
| break; |
| } |
| } |
| } |
| |
| static void h5_set_txwin(uint8_t *conf) |
| { |
| conf[2] = h5.tx_win & 0x07; |
| } |
| |
| static void rx_thread(void) |
| { |
| BT_DBG(""); |
| |
| while (true) { |
| struct net_buf *buf; |
| |
| buf = net_buf_get(&h5.rx_queue, K_FOREVER); |
| |
| hexdump("=> ", buf->data, buf->len); |
| |
| if (!memcmp(buf->data, sync_req, sizeof(sync_req))) { |
| if (h5.link_state == ACTIVE) { |
| /* TODO Reset H5 */ |
| } |
| |
| h5_send(sync_rsp, HCI_3WIRE_LINK_PKT, sizeof(sync_rsp)); |
| } else if (!memcmp(buf->data, sync_rsp, sizeof(sync_rsp))) { |
| if (h5.link_state == ACTIVE) { |
| /* TODO Reset H5 */ |
| } |
| |
| h5.link_state = INIT; |
| h5_set_txwin(conf_req); |
| h5_send(conf_req, HCI_3WIRE_LINK_PKT, sizeof(conf_req)); |
| } else if (!memcmp(buf->data, conf_req, 2)) { |
| /* |
| * The Host sends Config Response messages without a |
| * Configuration Field. |
| */ |
| h5_send(conf_rsp, HCI_3WIRE_LINK_PKT, sizeof(conf_rsp)); |
| |
| /* Then send Config Request with Configuration Field */ |
| h5_set_txwin(conf_req); |
| h5_send(conf_req, HCI_3WIRE_LINK_PKT, sizeof(conf_req)); |
| } else if (!memcmp(buf->data, conf_rsp, 2)) { |
| h5.link_state = ACTIVE; |
| if (buf->len > 2) { |
| /* Configuration field present */ |
| h5.tx_win = (buf->data[2] & 0x07); |
| } |
| |
| BT_DBG("Finished H5 configuration, tx_win %u", |
| h5.tx_win); |
| } else { |
| BT_ERR("Not handled yet %x %x", |
| buf->data[0], buf->data[1]); |
| } |
| |
| net_buf_unref(buf); |
| |
| /* Make sure we don't hog the CPU if the rx_queue never |
| * gets empty. |
| */ |
| k_yield(); |
| } |
| } |
| |
| static void h5_init(void) |
| { |
| BT_DBG(""); |
| |
| h5.link_state = UNINIT; |
| h5.rx_state = START; |
| h5.tx_win = 4U; |
| |
| /* TX thread */ |
| k_fifo_init(&h5.tx_queue); |
| k_thread_create(&tx_thread_data, tx_stack, |
| K_KERNEL_STACK_SIZEOF(tx_stack), |
| (k_thread_entry_t)tx_thread, NULL, NULL, NULL, |
| K_PRIO_COOP(CONFIG_BT_HCI_TX_PRIO), |
| 0, K_NO_WAIT); |
| k_thread_name_set(&tx_thread_data, "tx_thread"); |
| |
| k_fifo_init(&h5.rx_queue); |
| k_thread_create(&rx_thread_data, rx_stack, |
| K_KERNEL_STACK_SIZEOF(rx_stack), |
| (k_thread_entry_t)rx_thread, NULL, NULL, NULL, |
| K_PRIO_COOP(CONFIG_BT_RX_PRIO), |
| 0, K_NO_WAIT); |
| k_thread_name_set(&rx_thread_data, "rx_thread"); |
| |
| /* Unack queue */ |
| k_fifo_init(&h5.unack_queue); |
| |
| /* Init delayed work */ |
| k_work_init_delayable(&ack_work, ack_timeout); |
| k_work_init_delayable(&retx_work, retx_timeout); |
| } |
| |
| static int h5_open(void) |
| { |
| BT_DBG(""); |
| |
| uart_irq_rx_disable(h5_dev); |
| uart_irq_tx_disable(h5_dev); |
| |
| bt_uart_drain(h5_dev); |
| |
| uart_irq_callback_set(h5_dev, bt_uart_isr); |
| |
| h5_init(); |
| |
| uart_irq_rx_enable(h5_dev); |
| |
| return 0; |
| } |
| |
| static const struct bt_hci_driver drv = { |
| .name = "H:5", |
| .bus = BT_HCI_DRIVER_BUS_UART, |
| .open = h5_open, |
| .send = h5_queue, |
| }; |
| |
| static int bt_uart_init(const struct device *unused) |
| { |
| ARG_UNUSED(unused); |
| |
| h5_dev = DEVICE_DT_GET(DT_CHOSEN(zephyr_bt_uart)); |
| if (!device_is_ready(h5_dev)) { |
| return -EINVAL; |
| } |
| |
| bt_hci_driver_register(&drv); |
| |
| return 0; |
| } |
| |
| SYS_INIT(bt_uart_init, POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEVICE); |