boards/arm/xmc45_relax_kit/doc/index.rst

.. _xmc45_relax_kit:

INFINEON XMC45-RELAX-KIT
########################

Overview
********

The XMC4500 Relax Kit is designed to evaluate the capabilities of the XMC4500
Microcontroller. It is based on High performance ARM Cortex-M4F which can run
up to 120MHz.

.. image:: ./xmc45_relax_kit.jpeg
   :width: 720px
   :align: center
   :alt: XMC45-RELAX-KIT

Features:
=========

* ARM Cortex-M4F XMC4500
* 32 Mbit Quad-SPI Flash
* 4 x SPI-Master, 3x I2C, 3 x I2S, 3 x UART, 2 x CAN, 17 x ADC
* 2 pin header x1 and x2 with 80 pins
* Two buttons and two LEDs for user interaction
* Detachable on-board debugger (second XMC4500) with Segger J-Link

Details on the Relax Kit development board can be found in the `Relax Kit User Manual`_.

Supported Features
==================

* The on-board 12-MHz crystal allows the device to run at its maximum operating speed of 120MHz.

The Relax Kit development board configuration supports the following hardware features:

+-----------+------------+-----------------------+
| Interface | Controller | Driver/Component      |
+===========+============+=======================+
| NVIC      | on-chip    | nested vectored       |
|           |            | interrupt controller  |
+-----------+------------+-----------------------+
| SYSTICK   | on-chip    | system clock          |
+-----------+------------+-----------------------+
| UART      | on-chip    | serial port           |
+-----------+------------+-----------------------+

More details about the supported peripherals are available in `XMC4500 TRM`_
Other hardware features are not currently supported by the Zephyr kernel.

Building and Flashing
*********************
Flashing
========

Here is an example for the :ref:`hello_world` application.

.. zephyr-app-commands::
   :zephyr-app: samples/hello_world
   :board: xmc45_relax_kit
   :goals: flash

Debugging
=========

Here is an example for the :ref:`hello_world` application.

.. zephyr-app-commands::
   :zephyr-app: samples/hello_world
   :board: xmc45_relax_kit
   :goals: debug

Step through the application in your debugger.

References
**********

.. _Relax Kit User Manual:
   https://www.infineon.com/dgdl/Board_Users_Manual_XMC4500_Relax_Kit-V1_R1.2_released.pdf?fileId=db3a30433acf32c9013adf6b97b112f9

.. _XMC4500 TRM:
   https://www.infineon.com/dgdl/Infineon-xmc4500_rm_v1.6_2016-UM-v01_06-EN.pdf?fileId=db3a30433580b3710135a5f8b7bc6d13