blob: e5e7e7c1c996e283d07f20de517df21e4ba187ab [file] [log] [blame]
/*
* Copyright (c) 2021 BrainCo Inc.
*
* SPDX-License-Identifier: Apache-2.0
*/
#define DT_DRV_COMPAT gd_gd32_i2c
#include <errno.h>
#include <zephyr/kernel.h>
#include <zephyr/devicetree.h>
#include <zephyr/drivers/pinctrl.h>
#include <zephyr/drivers/i2c.h>
#include <gd32_i2c.h>
#include <gd32_rcu.h>
#include <zephyr/logging/log.h>
LOG_MODULE_REGISTER(i2c_gd32, CONFIG_I2C_LOG_LEVEL);
#include "i2c-priv.h"
/* Bus error */
#define I2C_GD32_ERR_BERR BIT(0)
/* Arbitration lost */
#define I2C_GD32_ERR_LARB BIT(1)
/* No ACK received */
#define I2C_GD32_ERR_AERR BIT(2)
/* I2C bus busy */
#define I2C_GD32_ERR_BUSY BIT(4)
struct i2c_gd32_config {
uint32_t reg;
uint32_t bitrate;
uint32_t rcu_periph_clock;
const struct pinctrl_dev_config *pcfg;
void (*irq_cfg_func)(void);
};
struct i2c_gd32_data {
struct k_sem bus_mutex;
struct k_sem sync_sem;
uint32_t dev_config;
uint16_t addr1;
uint16_t addr2;
uint32_t xfer_len;
struct i2c_msg *current;
uint8_t errs;
bool is_restart;
};
static inline void i2c_gd32_enable_interrupts(const struct i2c_gd32_config *cfg)
{
I2C_CTL1(cfg->reg) |= I2C_CTL1_ERRIE;
I2C_CTL1(cfg->reg) |= I2C_CTL1_EVIE;
I2C_CTL1(cfg->reg) |= I2C_CTL1_BUFIE;
}
static inline void i2c_gd32_disable_interrupts(const struct i2c_gd32_config *cfg)
{
I2C_CTL1(cfg->reg) &= ~I2C_CTL1_ERRIE;
I2C_CTL1(cfg->reg) &= ~I2C_CTL1_EVIE;
I2C_CTL1(cfg->reg) &= ~I2C_CTL1_BUFIE;
}
static inline void i2c_gd32_xfer_read(struct i2c_gd32_data *data,
const struct i2c_gd32_config *cfg)
{
data->current->len--;
*data->current->buf = I2C_DATA(cfg->reg);
data->current->buf++;
if ((data->xfer_len > 0U) &&
(data->current->len == 0U)) {
data->current++;
}
}
static inline void i2c_gd32_xfer_write(struct i2c_gd32_data *data,
const struct i2c_gd32_config *cfg)
{
data->current->len--;
I2C_DATA(cfg->reg) = *data->current->buf;
data->current->buf++;
if ((data->xfer_len > 0U) &&
(data->current->len == 0U)) {
data->current++;
}
}
static void i2c_gd32_handle_rbne(const struct device *dev)
{
struct i2c_gd32_data *data = dev->data;
const struct i2c_gd32_config *cfg = dev->config;
switch (data->xfer_len) {
case 0:
/* Unwanted data received, ignore it. */
k_sem_give(&data->sync_sem);
break;
case 1:
/* If total_read_length == 1, read the data directly. */
data->xfer_len--;
i2c_gd32_xfer_read(data, cfg);
k_sem_give(&data->sync_sem);
break;
case 2:
__fallthrough;
case 3:
/*
* If total_read_length == 2, or total_read_length > 3
* and remaining_read_length == 3, disable the RBNE
* interrupt.
* Remaining data will be read from BTC interrupt.
*/
I2C_CTL1(cfg->reg) &= ~I2C_CTL1_BUFIE;
break;
default:
/*
* If total_read_length > 3 and remaining_read_length > 3,
* read the data directly.
*/
data->xfer_len--;
i2c_gd32_xfer_read(data, cfg);
break;
}
}
static void i2c_gd32_handle_tbe(const struct device *dev)
{
struct i2c_gd32_data *data = dev->data;
const struct i2c_gd32_config *cfg = dev->config;
if (data->xfer_len > 0U) {
data->xfer_len--;
if (data->xfer_len == 0U) {
/*
* This is the last data to transmit, disable the TBE interrupt.
* Use the BTC interrupt to indicate the write data complete state.
*/
I2C_CTL1(cfg->reg) &= ~I2C_CTL1_BUFIE;
}
i2c_gd32_xfer_write(data, cfg);
} else {
/* Enter stop condition */
I2C_CTL0(cfg->reg) |= I2C_CTL0_STOP;
k_sem_give(&data->sync_sem);
}
}
static void i2c_gd32_handle_btc(const struct device *dev)
{
struct i2c_gd32_data *data = dev->data;
const struct i2c_gd32_config *cfg = dev->config;
if (data->current->flags & I2C_MSG_READ) {
uint32_t counter = 0U;
switch (data->xfer_len) {
case 2:
/* Stop condition must be generated before reading the last two bytes. */
I2C_CTL0(cfg->reg) |= I2C_CTL0_STOP;
for (counter = 2U; counter > 0; counter--) {
data->xfer_len--;
i2c_gd32_xfer_read(data, cfg);
}
k_sem_give(&data->sync_sem);
break;
case 3:
/* Clear ACKEN bit */
I2C_CTL0(cfg->reg) &= ~I2C_CTL0_ACKEN;
data->xfer_len--;
i2c_gd32_xfer_read(data, cfg);
break;
default:
i2c_gd32_handle_rbne(dev);
break;
}
} else {
i2c_gd32_handle_tbe(dev);
}
}
static void i2c_gd32_handle_addsend(const struct device *dev)
{
struct i2c_gd32_data *data = dev->data;
const struct i2c_gd32_config *cfg = dev->config;
if ((data->current->flags & I2C_MSG_READ) && (data->xfer_len <= 2U)) {
I2C_CTL0(cfg->reg) &= ~I2C_CTL0_ACKEN;
}
/* Clear ADDSEND bit */
I2C_STAT0(cfg->reg);
I2C_STAT1(cfg->reg);
if (data->is_restart) {
data->is_restart = false;
data->current->flags &= ~I2C_MSG_RW_MASK;
data->current->flags |= I2C_MSG_READ;
/* Enter repeated start condition */
I2C_CTL0(cfg->reg) |= I2C_CTL0_START;
return;
}
if ((data->current->flags & I2C_MSG_READ) && (data->xfer_len == 1U)) {
/* Enter stop condition */
I2C_CTL0(cfg->reg) |= I2C_CTL0_STOP;
}
}
static void i2c_gd32_event_isr(const struct device *dev)
{
struct i2c_gd32_data *data = dev->data;
const struct i2c_gd32_config *cfg = dev->config;
uint32_t stat;
stat = I2C_STAT0(cfg->reg);
if (stat & I2C_STAT0_SBSEND) {
if (data->current->flags & I2C_MSG_READ) {
I2C_DATA(cfg->reg) = (data->addr1 << 1U) | 1U;
} else {
I2C_DATA(cfg->reg) = (data->addr1 << 1U) | 0U;
}
} else if (stat & I2C_STAT0_ADD10SEND) {
I2C_DATA(cfg->reg) = data->addr2;
} else if (stat & I2C_STAT0_ADDSEND) {
i2c_gd32_handle_addsend(dev);
/*
* Must handle BTC first.
* For I2C_STAT0, BTC is the superset of RBNE and TBE.
*/
} else if (stat & I2C_STAT0_BTC) {
i2c_gd32_handle_btc(dev);
} else if (stat & I2C_STAT0_RBNE) {
i2c_gd32_handle_rbne(dev);
} else if (stat & I2C_STAT0_TBE) {
i2c_gd32_handle_tbe(dev);
}
}
static void i2c_gd32_error_isr(const struct device *dev)
{
struct i2c_gd32_data *data = dev->data;
const struct i2c_gd32_config *cfg = dev->config;
uint32_t stat;
stat = I2C_STAT0(cfg->reg);
if (stat & I2C_STAT0_BERR) {
I2C_STAT0(cfg->reg) &= ~I2C_STAT0_BERR;
data->errs |= I2C_GD32_ERR_BERR;
}
if (stat & I2C_STAT0_LOSTARB) {
I2C_STAT0(cfg->reg) &= ~I2C_STAT0_LOSTARB;
data->errs |= I2C_GD32_ERR_LARB;
}
if (stat & I2C_STAT0_AERR) {
I2C_STAT0(cfg->reg) &= ~I2C_STAT0_AERR;
data->errs |= I2C_GD32_ERR_AERR;
}
if (data->errs != 0U) {
/* Enter stop condition */
I2C_CTL0(cfg->reg) |= I2C_CTL0_STOP;
k_sem_give(&data->sync_sem);
}
}
static void i2c_gd32_log_err(struct i2c_gd32_data *data)
{
if (data->errs & I2C_GD32_ERR_BERR) {
LOG_ERR("Bus error");
}
if (data->errs & I2C_GD32_ERR_LARB) {
LOG_ERR("Arbitration lost");
}
if (data->errs & I2C_GD32_ERR_AERR) {
LOG_ERR("No ACK received");
}
if (data->errs & I2C_GD32_ERR_BUSY) {
LOG_ERR("I2C bus busy");
}
}
static void i2c_gd32_xfer_begin(const struct device *dev)
{
struct i2c_gd32_data *data = dev->data;
const struct i2c_gd32_config *cfg = dev->config;
k_sem_reset(&data->sync_sem);
data->errs = 0U;
data->is_restart = false;
/* Default to set ACKEN bit. */
I2C_CTL0(cfg->reg) |= I2C_CTL0_ACKEN;
if (data->current->flags & I2C_MSG_READ) {
/* For 2 bytes read, use POAP bit to give NACK for the last data receiving. */
if (data->xfer_len == 2U) {
I2C_CTL0(cfg->reg) |= I2C_CTL0_POAP;
}
/*
* For read on 10 bits address mode, start condition will happen twice.
* Transfer sequence as below:
* S addr1+W addr2 S addr1+R
* Use a is_restart flag to cover this case.
*/
if (data->dev_config & I2C_ADDR_10_BITS) {
data->is_restart = true;
data->current->flags &= ~I2C_MSG_RW_MASK;
}
}
i2c_gd32_enable_interrupts(cfg);
/* Enter repeated start condition */
I2C_CTL0(cfg->reg) |= I2C_CTL0_START;
}
static int i2c_gd32_xfer_end(const struct device *dev)
{
struct i2c_gd32_data *data = dev->data;
const struct i2c_gd32_config *cfg = dev->config;
i2c_gd32_disable_interrupts(cfg);
/* Wait for stop condition is done. */
while (I2C_STAT1(cfg->reg) & I2C_STAT1_I2CBSY) {
/* NOP */
}
if (data->errs) {
return -EIO;
}
return 0;
}
static int i2c_gd32_msg_read(const struct device *dev)
{
struct i2c_gd32_data *data = dev->data;
const struct i2c_gd32_config *cfg = dev->config;
if (I2C_STAT1(cfg->reg) & I2C_STAT1_I2CBSY) {
data->errs = I2C_GD32_ERR_BUSY;
return -EBUSY;
}
i2c_gd32_xfer_begin(dev);
k_sem_take(&data->sync_sem, K_FOREVER);
return i2c_gd32_xfer_end(dev);
}
static int i2c_gd32_msg_write(const struct device *dev)
{
struct i2c_gd32_data *data = dev->data;
const struct i2c_gd32_config *cfg = dev->config;
if (I2C_STAT1(cfg->reg) & I2C_STAT1_I2CBSY) {
data->errs = I2C_GD32_ERR_BUSY;
return -EBUSY;
}
i2c_gd32_xfer_begin(dev);
k_sem_take(&data->sync_sem, K_FOREVER);
return i2c_gd32_xfer_end(dev);
}
static int i2c_gd32_transfer(const struct device *dev,
struct i2c_msg *msgs,
uint8_t num_msgs,
uint16_t addr)
{
struct i2c_gd32_data *data = dev->data;
const struct i2c_gd32_config *cfg = dev->config;
struct i2c_msg *current, *next;
uint8_t itr;
int err = 0;
current = msgs;
/* First message flags implicitly contain I2C_MSG_RESTART flag. */
current->flags |= I2C_MSG_RESTART;
for (uint8_t i = 1; i <= num_msgs; i++) {
if (i < num_msgs) {
next = current + 1;
/*
* If there have a R/W transfer state change between messages,
* An explicit I2C_MSG_RESTART flag is needed for the second message.
*/
if ((current->flags & I2C_MSG_RW_MASK) !=
(next->flags & I2C_MSG_RW_MASK)) {
if ((next->flags & I2C_MSG_RESTART) == 0U) {
return -EINVAL;
}
}
/* Only the last message need I2C_MSG_STOP flag to free the Bus. */
if (current->flags & I2C_MSG_STOP) {
return -EINVAL;
}
} else {
/* Last message flags implicitly contain I2C_MSG_STOP flag. */
current->flags |= I2C_MSG_STOP;
}
if ((current->buf == NULL) ||
(current->len == 0U)) {
return -EINVAL;
}
current++;
}
k_sem_take(&data->bus_mutex, K_FOREVER);
/* Enable i2c device */
I2C_CTL0(cfg->reg) |= I2C_CTL0_I2CEN;
if (data->dev_config & I2C_ADDR_10_BITS) {
data->addr1 = 0xF0 | ((addr & BITS(8, 9)) >> 8U);
data->addr2 = addr & BITS(0, 7);
} else {
data->addr1 = addr & BITS(0, 6);
}
for (uint8_t i = 0; i < num_msgs; i = itr) {
data->current = &msgs[i];
data->xfer_len = msgs[i].len;
for (itr = i + 1; itr < num_msgs; itr++) {
if ((data->current->flags & I2C_MSG_RW_MASK) !=
(msgs[itr].flags & I2C_MSG_RW_MASK)) {
break;
}
data->xfer_len += msgs[itr].len;
}
if (data->current->flags & I2C_MSG_READ) {
err = i2c_gd32_msg_read(dev);
} else {
err = i2c_gd32_msg_write(dev);
}
if (err < 0) {
i2c_gd32_log_err(data);
break;
}
}
/* Disable I2C device */
I2C_CTL0(cfg->reg) &= ~I2C_CTL0_I2CEN;
k_sem_give(&data->bus_mutex);
return err;
}
static int i2c_gd32_configure(const struct device *dev,
uint32_t dev_config)
{
struct i2c_gd32_data *data = dev->data;
const struct i2c_gd32_config *cfg = dev->config;
uint32_t pclk1, freq, clkc;
int err = 0;
k_sem_take(&data->bus_mutex, K_FOREVER);
/* Disable I2C device */
I2C_CTL0(cfg->reg) &= ~I2C_CTL0_I2CEN;
/* GD32 i2c interface always connect to APB1. */
pclk1 = rcu_clock_freq_get(CK_APB1);
/* i2c clock frequency, us */
freq = pclk1 / 1000000U;
if (freq > I2CCLK_MAX) {
LOG_ERR("I2C max clock freq %u, current is %u\n",
I2CCLK_MAX, freq);
err = -ENOTSUP;
goto error;
}
/*
* Refer from SoC user manual.
* In standard mode:
* T_high = CLKC * T_pclk1
* T_low = CLKC * T_pclk1
*
* In fast mode and fast mode plus with DTCY=1:
* T_high = 9 * CLKC * T_pclk1
* T_low = 16 * CLKC * T_pclk1
*
* T_pclk1 is reciprocal of pclk1:
* T_pclk1 = 1 / pclk1
*
* T_high and T_low construct the bit transfer:
* T_high + T_low = 1 / bitrate
*
* And then, we can get the CLKC equation.
* Standard mode:
* CLKC = pclk1 / (bitrate * 2)
* Fast mode and fast mode plus:
* CLKC = pclk1 / (bitrate * 25)
*
* Variable list:
* T_high: high period of the SCL clock
* T_low: low period of the SCL clock
* T_pclk1: duration of single pclk1 pulse
* pclk1: i2c device clock frequency
* bitrate: 100 Kbits for standard mode
*/
switch (I2C_SPEED_GET(dev_config)) {
case I2C_SPEED_STANDARD:
if (freq < I2CCLK_MIN) {
LOG_ERR("I2C standard-mode min clock freq %u, current is %u\n",
I2CCLK_MIN, freq);
err = -ENOTSUP;
goto error;
}
I2C_CTL1(cfg->reg) &= ~I2C_CTL1_I2CCLK;
I2C_CTL1(cfg->reg) |= freq;
/* Standard-mode risetime maximum value: 1000ns */
if (freq == I2CCLK_MAX) {
I2C_RT(cfg->reg) = I2CCLK_MAX;
} else {
I2C_RT(cfg->reg) = freq + 1U;
}
/* CLKC = pclk1 / (bitrate * 2) */
clkc = pclk1 / (I2C_BITRATE_STANDARD * 2U);
I2C_CKCFG(cfg->reg) &= ~I2C_CKCFG_CLKC;
I2C_CKCFG(cfg->reg) |= clkc;
/* standard-mode */
I2C_CKCFG(cfg->reg) &= ~I2C_CKCFG_FAST;
break;
case I2C_SPEED_FAST:
if (freq < I2CCLK_FM_MIN) {
LOG_ERR("I2C fast-mode min clock freq %u, current is %u\n",
I2CCLK_FM_MIN, freq);
err = -ENOTSUP;
goto error;
}
/* Fast-mode risetime maximum value: 300ns */
I2C_RT(cfg->reg) = freq * 300U / 1000U + 1U;
/* CLKC = pclk1 / (bitrate * 25) */
clkc = pclk1 / (I2C_BITRATE_FAST * 25U);
if (clkc == 0U) {
clkc = 1U;
}
/* Default DCTY to 1 */
I2C_CKCFG(cfg->reg) |= I2C_CKCFG_DTCY;
I2C_CKCFG(cfg->reg) &= ~I2C_CKCFG_CLKC;
I2C_CKCFG(cfg->reg) |= clkc;
/* Transfer mode: fast-mode */
I2C_CKCFG(cfg->reg) |= I2C_CKCFG_FAST;
#ifdef I2C_FMPCFG
/* Disable transfer mode: fast-mode plus */
I2C_FMPCFG(cfg->reg) &= ~I2C_FMPCFG_FMPEN;
#endif /* I2C_FMPCFG */
break;
#ifdef I2C_FMPCFG
case I2C_SPEED_FAST_PLUS:
if (freq < I2CCLK_FM_PLUS_MIN) {
LOG_ERR("I2C fast-mode plus min clock freq %u, current is %u\n",
I2CCLK_FM_PLUS_MIN, freq);
err = -ENOTSUP;
goto error;
}
/* Fast-mode plus risetime maximum value: 120ns */
I2C_RT(cfg->reg) = freq * 120U / 1000U + 1U;
/* CLKC = pclk1 / (bitrate * 25) */
clkc = pclk1 / (I2C_BITRATE_FAST_PLUS * 25U);
if (clkc == 0U) {
clkc = 1U;
}
/* Default DCTY to 1 */
I2C_CKCFG(cfg->reg) |= I2C_CKCFG_DTCY;
I2C_CKCFG(cfg->reg) &= ~I2C_CKCFG_CLKC;
I2C_CKCFG(cfg->reg) |= clkc;
/* Transfer mode: fast-mode */
I2C_CKCFG(cfg->reg) |= I2C_CKCFG_FAST;
/* Enable transfer mode: fast-mode plus */
I2C_FMPCFG(cfg->reg) |= I2C_FMPCFG_FMPEN;
break;
#endif /* I2C_FMPCFG */
default:
err = -EINVAL;
goto error;
}
data->dev_config = dev_config;
error:
k_sem_give(&data->bus_mutex);
return err;
}
static struct i2c_driver_api i2c_gd32_driver_api = {
.configure = i2c_gd32_configure,
.transfer = i2c_gd32_transfer,
};
static int i2c_gd32_init(const struct device *dev)
{
struct i2c_gd32_data *data = dev->data;
const struct i2c_gd32_config *cfg = dev->config;
uint32_t bitrate_cfg;
int err;
err = pinctrl_apply_state(cfg->pcfg, PINCTRL_STATE_DEFAULT);
if (err < 0) {
return err;
}
/* Mutex semaphore to protect the i2c api in multi-thread env. */
k_sem_init(&data->bus_mutex, 1, 1);
/* Sync semaphore to sync i2c state between isr and transfer api. */
k_sem_init(&data->sync_sem, 0, K_SEM_MAX_LIMIT);
rcu_periph_clock_enable(cfg->rcu_periph_clock);
cfg->irq_cfg_func();
bitrate_cfg = i2c_map_dt_bitrate(cfg->bitrate);
i2c_gd32_configure(dev, I2C_MODE_CONTROLLER | bitrate_cfg);
return 0;
}
#define I2C_GD32_INIT(inst) \
PINCTRL_DT_INST_DEFINE(inst); \
static void i2c_gd32_irq_cfg_func_##inst(void) \
{ \
IRQ_CONNECT(DT_INST_IRQ_BY_NAME(inst, event, irq), \
DT_INST_IRQ_BY_NAME(inst, event, priority), \
i2c_gd32_event_isr, \
DEVICE_DT_INST_GET(inst), \
0); \
irq_enable(DT_INST_IRQ_BY_NAME(inst, event, irq)); \
\
IRQ_CONNECT(DT_INST_IRQ_BY_NAME(inst, error, irq), \
DT_INST_IRQ_BY_NAME(inst, error, priority), \
i2c_gd32_error_isr, \
DEVICE_DT_INST_GET(inst), \
0); \
irq_enable(DT_INST_IRQ_BY_NAME(inst, error, irq)); \
} \
static struct i2c_gd32_data i2c_gd32_data_##inst; \
const static struct i2c_gd32_config i2c_gd32_cfg_##inst = { \
.reg = DT_INST_REG_ADDR(inst), \
.bitrate = DT_INST_PROP(inst, clock_frequency), \
.rcu_periph_clock = DT_INST_PROP(inst, rcu_periph_clock), \
.pcfg = PINCTRL_DT_INST_DEV_CONFIG_GET(inst), \
.irq_cfg_func = i2c_gd32_irq_cfg_func_##inst, \
}; \
I2C_DEVICE_DT_INST_DEFINE(inst, \
i2c_gd32_init, NULL, \
&i2c_gd32_data_##inst, &i2c_gd32_cfg_##inst, \
POST_KERNEL, CONFIG_I2C_INIT_PRIORITY, \
&i2c_gd32_driver_api); \
DT_INST_FOREACH_STATUS_OKAY(I2C_GD32_INIT)