blob: 6dd323cfcfedf1dad5c01d1ce54d88600bc829eb [file] [log] [blame]
/*
* Copyright (c) 2019 Brett Witherspoon
* Copyright (c) 2020 Friedt Professional Engineering Services, Inc
*
* SPDX-License-Identifier: Apache-2.0
*/
#define DT_DRV_COMPAT ti_cc13xx_cc26xx_ieee802154
#define LOG_LEVEL CONFIG_IEEE802154_DRIVER_LOG_LEVEL
#include <zephyr/logging/log.h>
LOG_MODULE_REGISTER(ieee802154_cc13xx_cc26xx);
#include <zephyr/device.h>
#include <errno.h>
#include <zephyr/sys/byteorder.h>
#include <zephyr/net/ieee802154_radio.h>
#include <zephyr/net/ieee802154.h>
#include <zephyr/net/net_pkt.h>
#include <zephyr/random/rand32.h>
#include <string.h>
#include <zephyr/sys/sys_io.h>
#include <driverlib/rf_ieee_mailbox.h>
#include <driverlib/rfc.h>
#include <inc/hw_ccfg.h>
#include <inc/hw_fcfg1.h>
#include <rf_patches/rf_patch_cpe_multi_protocol.h>
#include <ti/drivers/rf/RF.h>
#include "ieee802154_cc13xx_cc26xx.h"
/* Overrides from SmartRF Studio 7 2.13.0 */
static uint32_t overrides[] = {
/* DC/DC regulator: In Tx, use DCDCCTL5[3:0]=0x3 (DITHER_EN=0 and IPEAK=3). */
0x00F388D3,
/* Rx: Set LNA bias current offset to +15 to saturate trim to max (default: 0) */
0x000F8883,
0xFFFFFFFF
};
/* 2.4 GHz power table */
static const RF_TxPowerTable_Entry txPowerTable_2_4[] = {
{-20, RF_TxPowerTable_DEFAULT_PA_ENTRY(6, 3, 0, 2)},
{-15, RF_TxPowerTable_DEFAULT_PA_ENTRY(10, 3, 0, 3)},
{-10, RF_TxPowerTable_DEFAULT_PA_ENTRY(15, 3, 0, 5)},
{-5, RF_TxPowerTable_DEFAULT_PA_ENTRY(22, 3, 0, 9)},
{0, RF_TxPowerTable_DEFAULT_PA_ENTRY(19, 1, 0, 20)},
{1, RF_TxPowerTable_DEFAULT_PA_ENTRY(22, 1, 0, 20)},
{2, RF_TxPowerTable_DEFAULT_PA_ENTRY(25, 1, 0, 25)},
{3, RF_TxPowerTable_DEFAULT_PA_ENTRY(29, 1, 0, 28)},
{4, RF_TxPowerTable_DEFAULT_PA_ENTRY(35, 1, 0, 39)},
{5, RF_TxPowerTable_DEFAULT_PA_ENTRY(23, 0, 0, 57)},
RF_TxPowerTable_TERMINATION_ENTRY,
};
static void ieee802154_cc13xx_cc26xx_rx_done(
struct ieee802154_cc13xx_cc26xx_data *drv_data);
static int ieee802154_cc13xx_cc26xx_stop(const struct device *dev);
/* TODO remove when rf driver bugfix is pulled in */
static void update_saved_cmdhandle(RF_CmdHandle ch, RF_CmdHandle *saved)
{
*saved = MAX(ch, *saved);
}
/* This is really the TX callback, because CSMA and TX are chained */
static void cmd_ieee_csma_callback(RF_Handle h, RF_CmdHandle ch, RF_EventMask e)
{
ARG_UNUSED(h);
const struct device *dev = DEVICE_DT_INST_GET(0);
struct ieee802154_cc13xx_cc26xx_data *drv_data = dev->data;
update_saved_cmdhandle(ch, (RF_CmdHandle *) &drv_data->saved_cmdhandle);
LOG_DBG("e: 0x%" PRIx64, e);
if (e & RF_EventInternalError) {
LOG_ERR("Internal error");
}
}
static void cmd_ieee_rx_callback(RF_Handle h, RF_CmdHandle ch, RF_EventMask e)
{
ARG_UNUSED(h);
const struct device *dev = DEVICE_DT_INST_GET(0);
struct ieee802154_cc13xx_cc26xx_data *drv_data = dev->data;
update_saved_cmdhandle(ch, (RF_CmdHandle *) &drv_data->saved_cmdhandle);
LOG_DBG("e: 0x%" PRIx64, e);
if (e & RF_EventRxBufFull) {
LOG_WRN("RX buffer is full");
}
if (e & RF_EventInternalError) {
LOG_ERR("Internal error");
}
if (e & RF_EventRxEntryDone) {
ieee802154_cc13xx_cc26xx_rx_done(drv_data);
}
}
static void client_error_callback(RF_Handle h, RF_CmdHandle ch, RF_EventMask e)
{
ARG_UNUSED(h);
ARG_UNUSED(ch);
LOG_DBG("e: 0x%" PRIx64, e);
}
static void client_event_callback(RF_Handle h, RF_ClientEvent event, void *arg)
{
ARG_UNUSED(h);
LOG_DBG("event: %d arg: %p", event, arg);
}
static enum ieee802154_hw_caps
ieee802154_cc13xx_cc26xx_get_capabilities(const struct device *dev)
{
return IEEE802154_HW_FCS | IEEE802154_HW_2_4_GHZ |
IEEE802154_HW_FILTER | IEEE802154_HW_TX_RX_ACK |
IEEE802154_HW_CSMA;
}
static int ieee802154_cc13xx_cc26xx_cca(const struct device *dev)
{
struct ieee802154_cc13xx_cc26xx_data *drv_data = dev->data;
RF_Stat status;
status = RF_runImmediateCmd(drv_data->rf_handle,
(uint32_t *)&drv_data->cmd_ieee_cca_req);
if (status != RF_StatSuccess) {
LOG_ERR("Failed to request CCA (0x%x)", status);
return -EIO;
}
switch (drv_data->cmd_ieee_cca_req.ccaInfo.ccaState) {
case 0:
return 0;
case 1:
return -EBUSY;
default:
return -EIO;
}
}
static int ieee802154_cc13xx_cc26xx_set_channel(const struct device *dev,
uint16_t channel)
{
int r;
RF_Stat status;
RF_CmdHandle cmd_handle;
struct ieee802154_cc13xx_cc26xx_data *drv_data = dev->data;
/* TODO Support sub-GHz for CC13xx */
if (channel < 11 || channel > 26) {
return -EINVAL;
}
/* Abort FG and BG processes */
if (ieee802154_cc13xx_cc26xx_stop(dev) < 0) {
r = -EIO;
goto out;
}
/* Block TX while changing channel */
k_mutex_lock(&drv_data->tx_mutex, K_FOREVER);
/* Set all RX entries to empty */
status = RF_runImmediateCmd(drv_data->rf_handle,
(uint32_t *)&drv_data->cmd_clear_rx);
if (status != RF_StatCmdDoneSuccess && status != RF_StatSuccess) {
LOG_ERR("Failed to clear RX queue (%d)", status);
r = -EIO;
goto out;
}
/* Run BG receive process on requested channel */
drv_data->cmd_ieee_rx.status = IDLE;
drv_data->cmd_ieee_rx.channel = channel;
cmd_handle = RF_postCmd(drv_data->rf_handle,
(RF_Op *)&drv_data->cmd_ieee_rx, RF_PriorityNormal,
cmd_ieee_rx_callback, RF_EventRxEntryDone);
if (cmd_handle < 0) {
LOG_ERR("Failed to post RX command (%d)", cmd_handle);
r = -EIO;
goto out;
}
r = 0;
out:
k_mutex_unlock(&drv_data->tx_mutex);
return r;
}
/* TODO remove when rf driver bugfix is pulled in */
static int ieee802154_cc13xx_cc26xx_reset_channel(
const struct device *dev)
{
uint8_t channel;
struct ieee802154_cc13xx_cc26xx_data *drv_data = dev->data;
/* extract the channel from cmd_ieee_rx */
channel = drv_data->cmd_ieee_rx.channel;
__ASSERT_NO_MSG(11 <= channel && channel <= 26);
LOG_DBG("re-setting channel to %u", channel);
return ieee802154_cc13xx_cc26xx_set_channel(dev, channel);
}
static int
ieee802154_cc13xx_cc26xx_filter(const struct device *dev, bool set,
enum ieee802154_filter_type type,
const struct ieee802154_filter *filter)
{
struct ieee802154_cc13xx_cc26xx_data *drv_data = dev->data;
if (!set) {
return -ENOTSUP;
}
if (type == IEEE802154_FILTER_TYPE_IEEE_ADDR) {
memcpy((uint8_t *)&drv_data->cmd_ieee_rx.localExtAddr,
filter->ieee_addr,
sizeof(drv_data->cmd_ieee_rx.localExtAddr));
} else if (type == IEEE802154_FILTER_TYPE_SHORT_ADDR) {
drv_data->cmd_ieee_rx.localShortAddr = filter->short_addr;
} else if (type == IEEE802154_FILTER_TYPE_PAN_ID) {
drv_data->cmd_ieee_rx.localPanID = filter->pan_id;
} else {
return -ENOTSUP;
}
return 0;
}
static int ieee802154_cc13xx_cc26xx_set_txpower(const struct device *dev,
int16_t dbm)
{
RF_Stat status;
const RF_TxPowerTable_Entry *table;
struct ieee802154_cc13xx_cc26xx_data *drv_data = dev->data;
/* TODO Support sub-GHz for CC13xx */
table = txPowerTable_2_4;
RF_TxPowerTable_Value power_table_value = RF_TxPowerTable_findValue(
(RF_TxPowerTable_Entry *)table, dbm);
if (power_table_value.rawValue == RF_TxPowerTable_INVALID_VALUE) {
LOG_ERR("RF_TxPowerTable_findValue() failed");
return -EINVAL;
}
status = RF_setTxPower(drv_data->rf_handle, power_table_value);
if (status != RF_StatSuccess) {
LOG_ERR("RF_setTxPower() failed: %d", status);
return -EIO;
}
return 0;
}
/* See IEEE 802.15.4 section 6.2.5.1 and TRM section 25.5.4.3 */
static int ieee802154_cc13xx_cc26xx_tx(const struct device *dev,
enum ieee802154_tx_mode mode,
struct net_pkt *pkt,
struct net_buf *frag)
{
int r;
RF_EventMask reason;
RF_ScheduleCmdParams sched_params = {
.allowDelay = true,
};
struct ieee802154_cc13xx_cc26xx_data *drv_data = dev->data;
bool ack = ieee802154_is_ar_flag_set(frag);
int retry = CONFIG_IEEE802154_CC13XX_CC26XX_RADIO_TX_RETRIES;
if (mode != IEEE802154_TX_MODE_CSMA_CA) {
NET_ERR("TX mode %d not supported", mode);
return -ENOTSUP;
}
k_mutex_lock(&drv_data->tx_mutex, K_FOREVER);
/* Workaround for Issue #29418 where the driver stalls after
* wrapping around RF command handle 4096. This change
* effectively empties the RF command queue every ~4 minutes
* but otherwise causes the system to incur little overhead.
* A subsequent SimpleLink SDK release should resolve the issue.
*/
if (drv_data->saved_cmdhandle >= BIT(12) - 5) {
r = ieee802154_cc13xx_cc26xx_reset_channel(dev);
if (r < 0) {
goto out;
}
drv_data->saved_cmdhandle = -1;
}
do {
drv_data->cmd_ieee_csma.status = IDLE;
drv_data->cmd_ieee_csma.randomState = sys_rand32_get();
drv_data->cmd_ieee_tx.status = IDLE;
drv_data->cmd_ieee_tx.payloadLen = frag->len;
drv_data->cmd_ieee_tx.pPayload = frag->data;
drv_data->cmd_ieee_tx.condition.rule =
ack ? COND_STOP_ON_FALSE : COND_NEVER;
if (ack) {
drv_data->cmd_ieee_rx_ack.status = IDLE;
drv_data->cmd_ieee_rx_ack.seqNo = frag->data[2];
}
reason = RF_runScheduleCmd(drv_data->rf_handle,
(RF_Op *)&drv_data->cmd_ieee_csma, &sched_params,
cmd_ieee_csma_callback,
RF_EventLastFGCmdDone | RF_EventLastCmdDone);
if ((reason & (RF_EventLastFGCmdDone | RF_EventLastCmdDone))
== 0) {
LOG_DBG("Failed to run command (0x%" PRIx64 ")",
reason);
continue;
}
if (drv_data->cmd_ieee_csma.status != IEEE_DONE_OK) {
LOG_DBG("Channel access failure (0x%x)",
drv_data->cmd_ieee_csma.status);
continue;
}
if (drv_data->cmd_ieee_tx.status != IEEE_DONE_OK) {
LOG_DBG("Transmit failed (0x%x)",
drv_data->cmd_ieee_tx.status);
continue;
}
if (!ack || drv_data->cmd_ieee_rx_ack.status == IEEE_DONE_ACK ||
drv_data->cmd_ieee_rx_ack.status == IEEE_DONE_ACKPEND) {
r = 0;
goto out;
}
LOG_DBG("No acknowledgment (0x%x)",
drv_data->cmd_ieee_rx_ack.status);
} while (retry-- > 0);
LOG_DBG("Failed to TX");
r = -EIO;
out:
k_mutex_unlock(&drv_data->tx_mutex);
return r;
}
static inline uint8_t ieee802154_cc13xx_cc26xx_convert_rssi(int8_t rssi)
{
if (rssi > CC13XX_CC26XX_RECEIVER_SENSITIVITY +
CC13XX_CC26XX_RSSI_DYNAMIC_RANGE) {
rssi = CC13XX_CC26XX_RECEIVER_SENSITIVITY +
CC13XX_CC26XX_RSSI_DYNAMIC_RANGE;
} else if (rssi < CC13XX_CC26XX_RECEIVER_SENSITIVITY) {
rssi = CC13XX_CC26XX_RECEIVER_SENSITIVITY;
}
return (255 * (rssi - CC13XX_CC26XX_RECEIVER_SENSITIVITY)) /
CC13XX_CC26XX_RSSI_DYNAMIC_RANGE;
}
static void ieee802154_cc13xx_cc26xx_rx_done(
struct ieee802154_cc13xx_cc26xx_data *drv_data)
{
struct net_pkt *pkt;
uint8_t len, seq, corr, lqi;
int8_t rssi;
uint8_t *sdu;
for (int i = 0; i < CC13XX_CC26XX_NUM_RX_BUF; i++) {
if (drv_data->rx_entry[i].status == DATA_ENTRY_FINISHED) {
/* rx_data contains length, psdu, fcs, rssi, corr */
len = drv_data->rx_data[i][0];
sdu = drv_data->rx_data[i] + 1;
seq = drv_data->rx_data[i][3];
corr = drv_data->rx_data[i][len--] & 0x3F;
rssi = drv_data->rx_data[i][len--];
/* remove fcs as it is not expected by L2
* But keep it for RAW mode
*/
if (IS_ENABLED(CONFIG_NET_L2_IEEE802154)) {
len -= 2;
}
/* scale 6-bit corr to 8-bit lqi */
lqi = corr << 2;
LOG_DBG("Received: len = %u, seq = %u, rssi = %d, lqi = %u",
len, seq, rssi, lqi);
pkt = net_pkt_rx_alloc_with_buffer(
drv_data->iface, len, AF_UNSPEC, 0, K_NO_WAIT);
if (!pkt) {
LOG_WRN("Cannot allocate packet");
continue;
}
if (net_pkt_write(pkt, sdu, len)) {
LOG_WRN("Cannot write packet");
net_pkt_unref(pkt);
continue;
}
drv_data->rx_entry[i].status = DATA_ENTRY_PENDING;
net_pkt_set_ieee802154_lqi(pkt, lqi);
net_pkt_set_ieee802154_rssi(
pkt,
ieee802154_cc13xx_cc26xx_convert_rssi(rssi));
if (net_recv_data(drv_data->iface, pkt)) {
LOG_WRN("Packet dropped");
net_pkt_unref(pkt);
}
} else if (drv_data->rx_entry[i].status ==
DATA_ENTRY_UNFINISHED) {
LOG_WRN("Frame not finished");
drv_data->rx_entry[i].status = DATA_ENTRY_PENDING;
}
}
}
static int ieee802154_cc13xx_cc26xx_start(const struct device *dev)
{
ARG_UNUSED(dev);
return 0;
}
static int ieee802154_cc13xx_cc26xx_stop(const struct device *dev)
{
struct ieee802154_cc13xx_cc26xx_data *drv_data = dev->data;
RF_Stat status;
status = RF_flushCmd(drv_data->rf_handle, RF_CMDHANDLE_FLUSH_ALL, 0);
if (!(status == RF_StatCmdDoneSuccess
|| status == RF_StatSuccess
|| status == RF_StatRadioInactiveError
|| status == RF_StatInvalidParamsError)) {
LOG_DBG("Failed to abort radio operations (%d)", status);
return -EIO;
}
return 0;
}
static int
ieee802154_cc13xx_cc26xx_configure(const struct device *dev,
enum ieee802154_config_type type,
const struct ieee802154_config *config)
{
return -ENOTSUP;
}
static void ieee802154_cc13xx_cc26xx_data_init(const struct device *dev)
{
struct ieee802154_cc13xx_cc26xx_data *drv_data = dev->data;
uint8_t *mac;
if (sys_read32(CCFG_BASE + CCFG_O_IEEE_MAC_0) != 0xFFFFFFFF &&
sys_read32(CCFG_BASE + CCFG_O_IEEE_MAC_1) != 0xFFFFFFFF) {
mac = (uint8_t *)(CCFG_BASE + CCFG_O_IEEE_MAC_0);
} else {
mac = (uint8_t *)(FCFG1_BASE + FCFG1_O_MAC_15_4_0);
}
memcpy(&drv_data->mac, mac, sizeof(drv_data->mac));
/* Setup circular RX queue (TRM 25.3.2.7) */
memset(&drv_data->rx_entry[0], 0, sizeof(drv_data->rx_entry[0]));
memset(&drv_data->rx_entry[1], 0, sizeof(drv_data->rx_entry[1]));
drv_data->rx_entry[0].pNextEntry = (uint8_t *)&drv_data->rx_entry[1];
drv_data->rx_entry[0].config.type = DATA_ENTRY_TYPE_PTR;
drv_data->rx_entry[0].config.lenSz = 1;
drv_data->rx_entry[0].length = sizeof(drv_data->rx_data[0]);
drv_data->rx_entry[0].pData = drv_data->rx_data[0];
drv_data->rx_entry[1].pNextEntry = (uint8_t *)&drv_data->rx_entry[0];
drv_data->rx_entry[1].config.type = DATA_ENTRY_TYPE_PTR;
drv_data->rx_entry[1].config.lenSz = 1;
drv_data->rx_entry[1].length = sizeof(drv_data->rx_data[1]);
drv_data->rx_entry[1].pData = drv_data->rx_data[1];
drv_data->rx_queue.pCurrEntry = (uint8_t *)&drv_data->rx_entry[0];
drv_data->rx_queue.pLastEntry = NULL;
k_mutex_init(&drv_data->tx_mutex);
}
static void ieee802154_cc13xx_cc26xx_iface_init(struct net_if *iface)
{
const struct device *dev = net_if_get_device(iface);
struct ieee802154_cc13xx_cc26xx_data *drv_data = dev->data;
net_if_set_link_addr(iface, drv_data->mac, sizeof(drv_data->mac),
NET_LINK_IEEE802154);
drv_data->iface = iface;
ieee802154_init(iface);
}
static struct ieee802154_radio_api ieee802154_cc13xx_cc26xx_radio_api = {
.iface_api.init = ieee802154_cc13xx_cc26xx_iface_init,
.get_capabilities = ieee802154_cc13xx_cc26xx_get_capabilities,
.cca = ieee802154_cc13xx_cc26xx_cca,
.set_channel = ieee802154_cc13xx_cc26xx_set_channel,
.filter = ieee802154_cc13xx_cc26xx_filter,
.set_txpower = ieee802154_cc13xx_cc26xx_set_txpower,
.tx = ieee802154_cc13xx_cc26xx_tx,
.start = ieee802154_cc13xx_cc26xx_start,
.stop = ieee802154_cc13xx_cc26xx_stop,
.configure = ieee802154_cc13xx_cc26xx_configure,
};
static int ieee802154_cc13xx_cc26xx_init(const struct device *dev)
{
RF_Params rf_params;
RF_EventMask reason;
RF_Mode rf_mode = {
.rfMode = RF_MODE_MULTIPLE,
.cpePatchFxn = &rf_patch_cpe_multi_protocol,
};
struct ieee802154_cc13xx_cc26xx_data *drv_data = dev->data;
/* Initialize driver data */
ieee802154_cc13xx_cc26xx_data_init(dev);
/* Setup radio */
RF_Params_init(&rf_params);
rf_params.pErrCb = client_error_callback;
rf_params.pClientEventCb = client_event_callback;
drv_data->rf_handle = RF_open(&drv_data->rf_object,
&rf_mode, (RF_RadioSetup *)&drv_data->cmd_radio_setup,
&rf_params);
if (drv_data->rf_handle == NULL) {
LOG_ERR("RF_open() failed");
return -EIO;
}
/*
* Run CMD_FS with frequency 0 to ensure RF_currClient is not NULL.
* RF_currClient is a static variable in the TI RF Driver library.
* If this is not done, then even CMD_ABORT fails.
*/
drv_data->cmd_fs.status = IDLE;
drv_data->cmd_fs.pNextOp = NULL;
drv_data->cmd_fs.condition.rule = COND_NEVER;
drv_data->cmd_fs.synthConf.bTxMode = false;
drv_data->cmd_fs.frequency = 0;
drv_data->cmd_fs.fractFreq = 0;
reason = RF_runCmd(drv_data->rf_handle, (RF_Op *)&drv_data->cmd_fs,
RF_PriorityNormal, NULL, 0);
if (reason != RF_EventLastCmdDone) {
LOG_ERR("Failed to set frequency: 0x%" PRIx64, reason);
return -EIO;
}
return 0;
}
static struct ieee802154_cc13xx_cc26xx_data ieee802154_cc13xx_cc26xx_data = {
.cmd_fs = {
.commandNo = CMD_FS,
},
.cmd_ieee_cca_req = {
.commandNo = CMD_IEEE_CCA_REQ,
},
.cmd_clear_rx = {
.commandNo = CMD_CLEAR_RX,
.pQueue = &ieee802154_cc13xx_cc26xx_data.rx_queue,
},
.cmd_ieee_rx = {
.commandNo = CMD_IEEE_RX,
.status = IDLE,
.pNextOp = NULL,
.startTrigger.triggerType = TRIG_NOW,
.condition.rule = COND_NEVER,
.channel = 0,
.rxConfig = {
.bAutoFlushCrc = 1,
.bAutoFlushIgn = 1,
.bIncludePhyHdr = 0,
.bIncludeCrc = 1,
.bAppendRssi = 1,
.bAppendCorrCrc = 1,
.bAppendSrcInd = 0,
.bAppendTimestamp = 0
},
.pRxQ = &ieee802154_cc13xx_cc26xx_data.rx_queue,
.pOutput = NULL,
.frameFiltOpt = {
.frameFiltEn = 1,
.frameFiltStop = 0,
.autoAckEn = 1,
.slottedAckEn = 0,
.autoPendEn = 0,
.defaultPend = 0,
.bPendDataReqOnly = 0,
.bPanCoord = 0,
.maxFrameVersion = 3,
.fcfReservedMask = 0,
.modifyFtFilter = 0,
.bStrictLenFilter = 1
},
.frameTypes = {
.bAcceptFt0Beacon = 0,
.bAcceptFt1Data = 1,
.bAcceptFt2Ack = 0,
.bAcceptFt3MacCmd = 1,
.bAcceptFt4Reserved = 0,
.bAcceptFt5Reserved = 0,
.bAcceptFt6Reserved = 0,
.bAcceptFt7Reserved = 0
},
.ccaOpt = {
#if IEEE802154_PHY_CCA_MODE == 1
.ccaEnEnergy = 1,
.ccaEnCorr = 0,
#elif IEEE802154_PHY_CCA_MODE == 2
.ccaEnEnergy = 0,
.ccaEnCorr = 1,
#elif IEEE802154_PHY_CCA_MODE == 3
.ccaEnEnergy = 1,
.ccaEnCorr = 1,
#else
#error "Invalid CCA mode"
#endif
.ccaEnSync = 1,
.ccaSyncOp = 0,
.ccaCorrOp = 0,
.ccaCorrThr = 3,
},
/* See IEEE 802.15.4-2006 6.9.9*/
.ccaRssiThr = CC13XX_CC26XX_RECEIVER_SENSITIVITY + 10,
.numExtEntries = 0x00,
.numShortEntries = 0x00,
.pExtEntryList = NULL,
.pShortEntryList = NULL,
.localExtAddr = 0x0000000000000000,
.localShortAddr = 0x0000,
.localPanID = 0x0000,
.endTrigger.triggerType = TRIG_NEVER
},
.cmd_set_tx_power = {
.commandNo = CMD_SET_TX_POWER
},
.cmd_ieee_csma = {
.commandNo = CMD_IEEE_CSMA,
.status = IDLE,
.pNextOp = (rfc_radioOp_t *)&ieee802154_cc13xx_cc26xx_data.cmd_ieee_tx,
.startTrigger.triggerType = TRIG_NOW,
.condition.rule = COND_STOP_ON_FALSE,
.randomState = 0,
.macMaxBE =
CONFIG_IEEE802154_CC13XX_CC26XX_RADIO_CSMA_CA_MAX_BE,
.macMaxCSMABackoffs =
CONFIG_IEEE802154_CC13XX_CC26XX_RADIO_CSMA_CA_MAX_BO,
.csmaConfig = {
/* Initial value of CW for unslotted CSMA */
.initCW = 1,
/* Unslotted CSMA for non-beacon enabled PAN */
.bSlotted = 0,
/* RX stays on during CSMA backoffs */
.rxOffMode = 0,
},
.NB = 0,
.BE = CONFIG_IEEE802154_CC13XX_CC26XX_RADIO_CSMA_CA_MIN_BE,
.remainingPeriods = 0,
.endTrigger.triggerType = TRIG_NEVER,
},
.cmd_ieee_tx = {
.commandNo = CMD_IEEE_TX,
.status = IDLE,
.pNextOp = (rfc_radioOp_t *)&ieee802154_cc13xx_cc26xx_data.cmd_ieee_rx_ack,
.startTrigger.triggerType = TRIG_NOW,
.condition.rule = COND_NEVER,
.txOpt = {
/* Automatically insert PHY header */
.bIncludePhyHdr = 0x0,
/* Automatically append CRC */
.bIncludeCrc = 0x0,
/* Disable long frame testing */
.payloadLenMsb = 0x0,
},
.payloadLen = 0x0,
.pPayload = NULL,
},
.cmd_ieee_rx_ack = {
.commandNo = CMD_IEEE_RX_ACK,
.status = IDLE,
.pNextOp = NULL,
.startTrigger.triggerType = TRIG_NOW,
.condition.rule = COND_NEVER,
.seqNo = 0,
.endTrigger = {
.triggerType = TRIG_REL_START,
.pastTrig = 1,
},
.endTime = IEEE802154_MAC_ACK_WAIT_DURATION *
CC13XX_CC26XX_RAT_CYCLES_PER_SECOND /
IEEE802154_2450MHZ_OQPSK_SYMBOLS_PER_SECOND,
},
.cmd_radio_setup = {
.commandNo = CMD_RADIO_SETUP,
.status = IDLE,
.pNextOp = NULL,
.startTrigger.triggerType = TRIG_NOW,
.condition.rule = COND_NEVER,
.mode = 0x01, /* IEEE 802.15.4 */
.loDivider = 0x00,
.config = {
.frontEndMode = 0x0,
.biasMode = 0x0,
.analogCfgMode = 0x0,
.bNoFsPowerUp = 0x0,
},
.txPower = 0x2853, /* 0 dBm */
.pRegOverride = overrides
},
};
#if defined(CONFIG_NET_L2_IEEE802154)
NET_DEVICE_DT_INST_DEFINE(0, ieee802154_cc13xx_cc26xx_init, NULL,
&ieee802154_cc13xx_cc26xx_data, NULL,
CONFIG_IEEE802154_CC13XX_CC26XX_INIT_PRIO,
&ieee802154_cc13xx_cc26xx_radio_api, IEEE802154_L2,
NET_L2_GET_CTX_TYPE(IEEE802154_L2), IEEE802154_MTU);
#else
DEVICE_DT_INST_DEFINE(0, ieee802154_cc13xx_cc26xx_init, NULL,
&ieee802154_cc13xx_cc26xx_data, NULL, POST_KERNEL,
CONFIG_IEEE802154_CC13XX_CC26XX_INIT_PRIO,
&ieee802154_cc13xx_cc26xx_radio_api);
#endif