| /* |
| * Copyright (c) 2021, Teslabs Engineering S.L. |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <arm/armv7-m.dtsi> |
| #include <zephyr/dt-bindings/gpio/gpio.h> |
| #include <zephyr/dt-bindings/i2c/i2c.h> |
| |
| #include <zephyr/dt-bindings/pwm/pwm.h> |
| |
| / { |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-m4f"; |
| reg = <0>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| mpu: mpu@e000ed90 { |
| compatible = "arm,armv7m-mpu"; |
| reg = <0xe000ed90 0x40>; |
| arm,num-mpu-regions = <8>; |
| }; |
| }; |
| }; |
| |
| soc { |
| sram0: memory@20000000 { |
| compatible = "mmio-sram"; |
| reg = <0x20000000 DT_SIZE_K(112)>; |
| }; |
| |
| fmc: flash-controller@40023c00 { |
| compatible = "gd,gd32-flash-controller"; |
| reg = <0x40023c00 0x400>; |
| |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| flash0: flash@8000000 { |
| compatible = "soc-nv-flash"; |
| }; |
| }; |
| |
| usart0: usart@40011000 { |
| compatible = "gd,gd32-usart"; |
| reg = <0x40011000 0x400>; |
| interrupts = <37 0>; |
| rcu-periph-clock = <0x1104>; |
| status = "disabled"; |
| }; |
| |
| usart1: usart@40004400 { |
| compatible = "gd,gd32-usart"; |
| reg = <0x40004400 0x400>; |
| interrupts = <38 0>; |
| rcu-periph-clock = <0x1011>; |
| status = "disabled"; |
| }; |
| |
| usart2: usart@40004800 { |
| compatible = "gd,gd32-usart"; |
| reg = <0x40004800 0x400>; |
| interrupts = <39 0>; |
| rcu-periph-clock = <0x1012>; |
| status = "disabled"; |
| }; |
| |
| uart3: usart@40004c00 { |
| compatible = "gd,gd32-usart"; |
| reg = <0x40004c00 0x400>; |
| interrupts = <52 0>; |
| rcu-periph-clock = <0x1013>; |
| status = "disabled"; |
| }; |
| |
| uart4: usart@40005000 { |
| compatible = "gd,gd32-usart"; |
| reg = <0x40005000 0x400>; |
| interrupts = <52 0>; |
| rcu-periph-clock = <0x1014>; |
| status = "disabled"; |
| }; |
| |
| usart5: usart@40011400 { |
| compatible = "gd,gd32-usart"; |
| reg = <0x40011400 0x400>; |
| interrupts = <71 0>; |
| rcu-periph-clock = <0x1105>; |
| status = "disabled"; |
| }; |
| |
| uart6: usart@40007800 { |
| compatible = "gd,gd32-usart"; |
| reg = <0x40007800 0x400>; |
| interrupts = <82 0>; |
| rcu-periph-clock = <0x101e>; |
| status = "disabled"; |
| }; |
| |
| uart7: usart@40007c00 { |
| compatible = "gd,gd32-usart"; |
| reg = <0x40007c00 0x400>; |
| interrupts = <83 0>; |
| rcu-periph-clock = <0x101f>; |
| status = "disabled"; |
| }; |
| |
| dac: dac@40007400 { |
| compatible = "gd,gd32-dac"; |
| reg = <0x40007400 0x400>; |
| rcu-periph-clock = <0x101d>; |
| num-channels = <2>; |
| status = "disabled"; |
| #io-channel-cells = <1>; |
| }; |
| |
| i2c0: i2c@40005400 { |
| compatible = "gd,gd32-i2c"; |
| reg = <0x40005400 0x400>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| interrupts = <31 0>, <32 0>; |
| interrupt-names = "event", "error"; |
| rcu-periph-clock = <0x1015>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@40005800 { |
| compatible = "gd,gd32-i2c"; |
| reg = <0x40005800 0x400>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| interrupts = <33 0>, <34 0>; |
| interrupt-names = "event", "error"; |
| rcu-periph-clock = <0x1016>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@40005c00 { |
| compatible = "gd,gd32-i2c"; |
| reg = <0x40005c00 0x400>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| interrupts = <72 0>, <73 0>; |
| interrupt-names = "event", "error"; |
| rcu-periph-clock = <0x1017>; |
| status = "disabled"; |
| }; |
| |
| spi0: spi@40013000 { |
| compatible = "gd,gd32-spi"; |
| reg = <0x40013000 0x400>; |
| interrupts = <35 0>; |
| rcu-periph-clock = <0x110c>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| spi1: spi@40003800 { |
| compatible = "gd,gd32-spi"; |
| reg = <0x40003800 0x400>; |
| interrupts = <36 0>; |
| rcu-periph-clock = <0x100e>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| spi2: spi@40003c00 { |
| compatible = "gd,gd32-spi"; |
| reg = <0x40003c00 0x400>; |
| interrupts = <51 0>; |
| rcu-periph-clock = <0x100f>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| adc0: adc@40012000 { |
| compatible = "gd,gd32-adc"; |
| reg = <0x40012000 0x100>; |
| interrupts = <18 0>; |
| rcu-periph-clock = <0x1108>; |
| channels = <16>; |
| status = "disabled"; |
| #io-channel-cells = <1>; |
| }; |
| |
| adc1: adc@40012100 { |
| compatible = "gd,gd32-adc"; |
| reg = <0x40012100 0x100>; |
| interrupts = <18 0>; |
| rcu-periph-clock = <0x1109>; |
| channels = <16>; |
| status = "disabled"; |
| #io-channel-cells = <1>; |
| }; |
| |
| adc2: adc@40012200 { |
| compatible = "gd,gd32-adc"; |
| reg = <0x40012200 0x100>; |
| interrupts = <18 0>; |
| rcu-periph-clock = <0x110A>; |
| channels = <16>; |
| status = "disabled"; |
| #io-channel-cells = <1>; |
| }; |
| |
| syscfg: syscfg@40013800 { |
| compatible = "gd,gd32-syscfg"; |
| reg = <0x40013800 0x400>; |
| rcu-periph-clock = <0x110e>; |
| }; |
| |
| exti: interrupt-controller@40013c00 { |
| compatible = "gd,gd32-exti"; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| reg = <0x40013c00 0x400>; |
| num-lines = <23>; |
| interrupts = <6 0>, <7 0>, <8 0>, <9 0>, <10 0>, <23 0>, |
| <40 0>; |
| interrupt-names = "line0", "line1", "line2", "line3", |
| "line4", "line5-9", "line10-15"; |
| status = "okay"; |
| }; |
| |
| pinctrl: pin-controller@40020000 { |
| compatible = "gd,gd32-pinctrl-af"; |
| reg = <0x40020000 0x2400>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| status = "okay"; |
| |
| gpioa: gpio@40020000 { |
| compatible = "gd,gd32-gpio"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| reg = <0x40020000 0x400>; |
| rcu-periph-clock = <0xc00>; |
| status = "disabled"; |
| }; |
| |
| gpiob: gpio@40020400 { |
| compatible = "gd,gd32-gpio"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| reg = <0x40020400 0x400>; |
| rcu-periph-clock = <0xc01>; |
| status = "disabled"; |
| }; |
| |
| gpioc: gpio@40020800 { |
| compatible = "gd,gd32-gpio"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| reg = <0x40020800 0x400>; |
| rcu-periph-clock = <0xc02>; |
| status = "disabled"; |
| }; |
| |
| gpiod: gpio@40020c00 { |
| compatible = "gd,gd32-gpio"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| reg = <0x40020c00 0x400>; |
| rcu-periph-clock = <0xc03>; |
| status = "disabled"; |
| }; |
| |
| gpioe: gpio@40021000 { |
| compatible = "gd,gd32-gpio"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| reg = <0x40021000 0x400>; |
| rcu-periph-clock = <0xc04>; |
| status = "disabled"; |
| }; |
| |
| gpiof: gpio@40021400 { |
| compatible = "gd,gd32-gpio"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| reg = <0x40021400 0x400>; |
| rcu-periph-clock = <0xc05>; |
| status = "disabled"; |
| }; |
| |
| gpiog: gpio@40021800 { |
| compatible = "gd,gd32-gpio"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| reg = <0x40021800 0x400>; |
| rcu-periph-clock = <0xc06>; |
| status = "disabled"; |
| }; |
| |
| gpioh: gpio@40021c00 { |
| compatible = "gd,gd32-gpio"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| reg = <0x40021c00 0x400>; |
| rcu-periph-clock = <0xc07>; |
| status = "disabled"; |
| }; |
| |
| gpioi: gpio@40022000 { |
| compatible = "gd,gd32-gpio"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| reg = <0x40022000 0x400>; |
| rcu-periph-clock = <0xc08>; |
| status = "disabled"; |
| }; |
| }; |
| |
| timer0: timer@40010000 { |
| compatible = "gd,gd32-timer"; |
| reg = <0x40010000 0x400>; |
| interrupts = <24 0>, <25 0>, <26 0>, <27 0>; |
| interrupt-names = "brk", "up", "trgcom", "cc"; |
| rcu-periph-clock = <0x1100>; |
| rcu-periph-reset = <0x900>; |
| is-advanced; |
| channels = <4>; |
| status = "disabled"; |
| |
| pwm { |
| compatible = "gd,gd32-pwm"; |
| status = "disabled"; |
| #pwm-cells = <3>; |
| }; |
| }; |
| |
| timer1: timer@40000000 { |
| compatible = "gd,gd32-timer"; |
| reg = <0x40000000 0x400>; |
| interrupts = <28 0>; |
| interrupt-names = "global"; |
| rcu-periph-clock = <0x1000>; |
| rcu-periph-reset = <0x800>; |
| is-32bit; |
| channels = <4>; |
| status = "disabled"; |
| |
| pwm { |
| compatible = "gd,gd32-pwm"; |
| status = "disabled"; |
| #pwm-cells = <3>; |
| }; |
| }; |
| |
| timer2: timer@40000400 { |
| compatible = "gd,gd32-timer"; |
| reg = <0x40000400 0x400>; |
| interrupts = <29 0>; |
| interrupt-names = "global"; |
| rcu-periph-clock = <0x1001>; |
| rcu-periph-reset = <0x801>; |
| channels = <4>; |
| status = "disabled"; |
| |
| pwm { |
| compatible = "gd,gd32-pwm"; |
| status = "disabled"; |
| #pwm-cells = <3>; |
| }; |
| }; |
| |
| timer3: timer@40000800 { |
| compatible = "gd,gd32-timer"; |
| reg = <0x40000800 0x400>; |
| interrupts = <30 0>; |
| interrupt-names = "global"; |
| rcu-periph-clock = <0x1002>; |
| rcu-periph-reset = <0x802>; |
| channels = <4>; |
| status = "disabled"; |
| |
| pwm { |
| compatible = "gd,gd32-pwm"; |
| status = "disabled"; |
| #pwm-cells = <3>; |
| }; |
| }; |
| |
| timer4: timer@40000c00 { |
| compatible = "gd,gd32-timer"; |
| reg = <0x40000c00 0x400>; |
| interrupts = <50 0>; |
| interrupt-names = "global"; |
| rcu-periph-clock = <0x1003>; |
| rcu-periph-reset = <0x803>; |
| is-32bit; |
| channels = <4>; |
| status = "disabled"; |
| |
| pwm { |
| compatible = "gd,gd32-pwm"; |
| status = "disabled"; |
| #pwm-cells = <3>; |
| }; |
| }; |
| |
| timer5: timer@40001000 { |
| compatible = "gd,gd32-timer"; |
| reg = <0x40001000 0x400>; |
| interrupts = <54 0>; |
| interrupt-names = "global"; |
| rcu-periph-clock = <0x1004>; |
| rcu-periph-reset = <0x804>; |
| channels = <0>; |
| status = "disabled"; |
| }; |
| |
| timer6: timer@40001400 { |
| compatible = "gd,gd32-timer"; |
| reg = <0x40001400 0x400>; |
| interrupts = <55 0>; |
| interrupt-names = "global"; |
| rcu-periph-clock = <0x1005>; |
| rcu-periph-reset = <0x805>; |
| channels = <0>; |
| status = "disabled"; |
| }; |
| |
| timer7: timer@40010400 { |
| compatible = "gd,gd32-timer"; |
| reg = <0x40010400 0x400>; |
| interrupts = <43 0>, <44 0>, <45 0>, <46 0>; |
| interrupt-names = "brk", "up", "trgcom", "cc"; |
| rcu-periph-clock = <0x1101>; |
| rcu-periph-reset = <0x901>; |
| is-advanced; |
| channels = <4>; |
| status = "disabled"; |
| |
| pwm { |
| compatible = "gd,gd32-pwm"; |
| status = "disabled"; |
| #pwm-cells = <3>; |
| }; |
| }; |
| |
| timer8: timer@40014000 { |
| compatible = "gd,gd32-timer"; |
| reg = <0x40014000 0x400>; |
| interrupts = <24 0>; |
| interrupt-names = "global"; |
| rcu-periph-clock = <0x1110>; |
| rcu-periph-reset = <0x910>; |
| channels = <2>; |
| status = "disabled"; |
| |
| pwm { |
| compatible = "gd,gd32-pwm"; |
| status = "disabled"; |
| #pwm-cells = <3>; |
| }; |
| }; |
| |
| timer9: timer@40014400 { |
| compatible = "gd,gd32-timer"; |
| reg = <0x40014400 0x400>; |
| interrupts = <25 0>; |
| interrupt-names = "global"; |
| rcu-periph-clock = <0x1111>; |
| rcu-periph-reset = <0x911>; |
| channels = <1>; |
| status = "disabled"; |
| |
| pwm { |
| compatible = "gd,gd32-pwm"; |
| status = "disabled"; |
| #pwm-cells = <3>; |
| }; |
| }; |
| |
| timer10: timer@40014800 { |
| compatible = "gd,gd32-timer"; |
| reg = <0x40014800 0x400>; |
| interrupts = <26 0>; |
| interrupt-names = "global"; |
| rcu-periph-clock = <0x1112>; |
| rcu-periph-reset = <0x912>; |
| channels = <1>; |
| status = "disabled"; |
| |
| pwm { |
| compatible = "gd,gd32-pwm"; |
| status = "disabled"; |
| #pwm-cells = <3>; |
| }; |
| }; |
| |
| timer11: timer@40001800 { |
| compatible = "gd,gd32-timer"; |
| reg = <0x40001800 0x400>; |
| interrupts = <43 0>; |
| interrupt-names = "global"; |
| rcu-periph-clock = <0x1006>; |
| rcu-periph-reset = <0x806>; |
| channels = <2>; |
| status = "disabled"; |
| |
| pwm { |
| compatible = "gd,gd32-pwm"; |
| status = "disabled"; |
| #pwm-cells = <3>; |
| }; |
| }; |
| |
| timer12: timer@40001c00 { |
| compatible = "gd,gd32-timer"; |
| reg = <0x40001c00 0x400>; |
| interrupts = <44 0>; |
| interrupt-names = "global"; |
| rcu-periph-clock = <0x1007>; |
| rcu-periph-reset = <0x802>; |
| channels = <1>; |
| status = "disabled"; |
| |
| pwm { |
| compatible = "gd,gd32-pwm"; |
| status = "disabled"; |
| #pwm-cells = <3>; |
| }; |
| }; |
| |
| timer13: timer@40002000 { |
| compatible = "gd,gd32-timer"; |
| reg = <0x40002000 0x400>; |
| interrupts = <45 0>; |
| interrupt-names = "global"; |
| rcu-periph-clock = <0x1008>; |
| rcu-periph-reset = <0x808>; |
| channels = <1>; |
| status = "disabled"; |
| |
| pwm { |
| compatible = "gd,gd32-pwm"; |
| status = "disabled"; |
| #pwm-cells = <3>; |
| }; |
| }; |
| |
| dma0: dma@40026000 { |
| compatible = "gd,gd32-dma"; |
| reg = <0x40026000 0x400>; |
| interrupts = <11 0>, <12 0>, <13 0>, <14 0>, |
| <15 0>, <16 0>, <17 0>, <47 0>; |
| rcu-periph-clock = <0xc15>; |
| dma-channels = <8>; |
| #dma-cells = <1>; |
| status = "disabled"; |
| }; |
| |
| dma1: dma@40026400 { |
| compatible = "gd,gd32-dma"; |
| reg = <0x40026400 0x400>; |
| interrupts = <56 0>, <57 0>, <58 0>, <59 0>, |
| <60 0>, <68 0>, <69 0>, <70 0>; |
| rcu-periph-clock = <0xc16>; |
| dma-channels = <8>; |
| #dma-cells = <1>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| |
| &nvic { |
| arm,num-irq-priority-bits = <4>; |
| }; |
